 |
 |
News |
|
 |
| |
|
|
| XRAY presents new authentic option parts for XRAY XT8 cars: |
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
|
Rear shock spring 82mm - 3-Dots & 4-Dots offer a mix of progressive & linear characteristics. The shorter design helps to achieve lower ride height on high traction tracks. The springs are slightly progressive, but under more compression change characteristics to become more linear. This gives excellent feeling and feedback in all different track conditions.
These XRAY shock springs, like all other XRAY springs, are manually measured, selected and matched into pairs to guarantee precisely equal length and damping characteristics.
Fits XB8, XB8E, XT8, XT8E |
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
|
Wickerbill rear wing features more downforce that helps increase traction when needed, and has 12 pre-marked air flow hole positions that can be opened to fine tune downforce for any conditions. The wickerbill plate is mounted via 5 screws for easy downforce setup.
Made from a strong special composite mixture, the wing was designed to survive severe abusive and extreme crashes while keeping its shape.
Available in white, black and yellow alternative. |
|
(click to enlarge) |
|
|
|
| Fits XB8, XB8E, XT8, XT8E |
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
|
| Graphite chassis stiffener - long made from 2.2mm premium-grade graphite material. Mounted with rear medium brace allows flex adjustment in 3 different settings for different track conditions. |
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
|
XT8 Composite Solid Lower Suspension Arms moulded from hard composite make the solid suspension arms even harder. The solid suspension arms feature stronger, reinforced design to maintain rigidity in extreme conditions and higher temperatures. These hard suspension arms improve the XT8's stability and predictability in high speed corners.
Fits XT8 & XT8E |
|
(click to enlarge) |
|
|
|
XT8 Composite Solid Lower Suspension Arms moulded from hard composite make the solid suspension arms even harder. The solid suspension arms feature stronger, reinforced design to maintain rigidity in extreme conditions and higher temperatures. These hard suspension arms improve the XT8's stability and predictability in high speed corners.
Use with #352127-H XT8 Composite Solid Front Lower Suspension Arm Left - Hard |
|
(click to enlarge) |
|
|
|
XT8 Composite Solid Lower Suspension Arms moulded from hard composite make the solid suspension arms even harder. The solid suspension arms feature stronger, reinforced design to maintain rigidity in extreme conditions and higher temperatures. These hard suspension arms improve the XT8's stability and predictability in high speed corners.
Use with #352126-H XT8 Composite Solid Front Lower Suspension Arm Right - Hard |
|
(click to enlarge) |
|
|
|
| XT8 Composite Solid Lower Suspension Arms moulded from hard composite make the solid suspension arms even harder. The solid suspension arms feature stronger, reinforced design to maintain rigidity in extreme conditions and higher temperatures. These hard suspension arms improve the XT8's stability and predictability in high speed corners. |
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
|
CNC-machined fan holder made from premium graphite material designed for saddle pack layout. This fan holder is designed to accommodate the XB8E and XT8E in the saddle pack configuration. The fan holder reduces vibrations from the chassis and thus increasing lifetime of the fan.
|
|
(click to enlarge) |
|
|
(click to enlarge) |
High-Torque lightweight 3-shoe flywheel helps to increase acceleration and improves throttle feeling. Made from tough Swiss 7075 T6 alu and hard coated for extra durability. Strategically lightened compared to the standard #358532 flywheel, reducing rotating weight without sacrificing strength or durability. Highly-polished, smooth flyweight pins are factory-pressed. Knurled outer edge for easy starting on starter box. Integrated cover prevents dirt from entering the engine bearing.
Fits all XB8 & XT8
|
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
|
| The stylish and effective rear wing was designed to provide the appropriate amount of downforce and generate required stability for the car. Made from a strong special composite mixture, the wing was designed to survive severe abusive and extreme crashes while keeping its shape. Higher sides improve high speed stability and fulfill IFMAR rules. |
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
|
Rubber-sealed differential housings made from high-quality Swiss 7075 T6 aluminum increases performance in high temperature conditions. Larger oil volume prevents the diff from overheating, extending its lifespan. CNC-machined from premium lightweight T6 aluminum. Black coated.
Fits: XB8•19, XB8•18, XB8•17, XB8E•19, XB8E•18, XB8E•17, XT8•19, XT8•17, XT8E•19, GTX8•19
|
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
(click to enlarge) |
355101 XRAY XT8 Active Diff•
The unique XRAY Active Differential is a high-performance, adjustable front gear differential for XT8 truggies• vastly improving the truggy•s speed and handling characteristics. The special design of the internal components using different angled segments allows the diff gears to engage on-power to increase the forward traction and stability to the truggy, making it faster and easier to drive. |
|
(click to enlarge) |
| While the XRAY Active Differential is a performance option for serious racers who want to gain an edge on superior speed and handling, it is also of great benefit to any level of driver that wants to a more predictable and easy-to-drive car in any racing conditions. |
|
(click to enlarge) |
|
| Feature Summary: |
|
• High-performance adjustable front Active Differential for improved speed & handling
• Designed for XT8 models
• Fully adjustable on- and off-power performance using different internal segments and gears
• Improves diff action and increases traction
• Easy and consistent steering
• Designed for serious racers, benefits all levels of racers |
|
(click to enlarge) |
|
| Lighweight Composite Diff Body |
(click to enlarge) |
| Moulded from XRAY's own special composite mixture, the body will not expand when temperatures rise inside the diff. The diff body is hand-ground on a precision grinding machine to ensure maximum roundness, and features a molded-in hard steel diff outdrive ring with a high-tolerance, precision-ground inner hole to ensure super-free turning of the outdrives. |
| Diff Outdrives |
(click to enlarge) |
| The diff outdrives are CNC-machined on precision German long-turn machines and are manufactured from self-developed, world-renowned HUDY Spring Steel• • the toughest steel material available. The diff outdrives are additionally ground and strategically lightened to reduce rotating weight. The diff outdrives are then further hardened to ensure maximum strength and longest lifespan. The diff outdrive shafts are additionally precision hand-ground to a very high tolerance to ensure an ultra-smooth tight fit in the diff body and diff gear. |
| Internal Gears |
(click to enlarge) |
| The internal gears of the Active Diff are die-cast and pressed from high-grade steel material using very high pressure to ensure a very strong core, and then are specially hardened to ensure minimal wear and longest life. |
| Diff Gear |
(click to enlarge) |
| The diff gear is machined from special HUDY steel material which has been specially developed for gear-type products, additionally hardened and precision ground to fit the tightest tolerance requirements for perfect fit with the diff outdrives. The gears are individually machined on a precision German gear machine and every gear is individually tested and inspected. The diff gear is then laser engraved with •Active 43T• for easy and instant recognition. An optional 41T gear is also available. |
|
(click to enlarge) |
|
| Active Diff Segments |
(click to enlarge) |
| The Active Diff segments are CNC-machined from very tough steel, and have very precisely-machined •V• ramp grooves with different angles for easy engagement/disengagement adjustment. The segments are hardened to ensure high life. The Active Diff comes with standard with a 90• segment, while a 120• segment is available optionally. |
| Active Diff Action |
|
| The action of the Active Diff is easily adjusted using different internal segments: standard 90• segment, or optional 120• segment. |
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
(click to enlarge) |
| Using these wheel axles will increase the overall track width by 10mm, making the car more stable and easier to drive. Suggested for use only with 0-offset wheels on XT8 Truggy. |
|
(click to enlarge) |
|
|
(click to enlarge) |
| Xray presents XRAY Aerodisk truggy wheels available now in different colours: |
|
(click to enlarge) |
| XRAY Aerodisk truggy wheels molded from light yet very durable material and are well suited for high-competition truggy racing. XRAY Aerodisk truggy wheels have offset 19.5. Set of 4. |
|
(click to enlarge) |
|
|
397352
(click to enlarge) |
| Flashy new FireStylin' full-colour graphic set for XT8 dish wheels makes a bright, bold visual statement, setting your car apart from the crowd. Made from die-cut tough, self-adhesive vinyl for easy application and long wear. |
|
397353
(click to enlarge) |
| For easy application, the stickers are die-cut so you just have to peel off the sticker and apply to the wheels. |
|
397354
(click to enlarge) |
| Available in various luminous cool colors to match every different paint scheme of the buggy or truggy, as well as matching the different-colored XRAY wheels. |
|
|
|
|
