To enjoy the longest possible lifespan of the drive shafts, it is extremely important to properly service the drive shaft pins.
There is no reason to change the entire drive shaft when only the shaft pin is worn out. For this reason the HUDY Drive Pin Replacement Tool will save you money.
(click to enlarge)
1. Do not use drive shafts when the pins are worn.
2. Press out the worn pins.
3. Press in new pins and regularly inspect for wear.
- suitable for drive shafts with 3mm pins
- quick and easy to use
- cost saving
- includes complete detailed manual how to remove old pins and install new pins
In order to extend the life of the pin, we recommend using #106210 HUDY Graphite Grease. The grease prevents direct contact between the pin and the outdrive, and increases lubrication for longer pin lifespan.
(click to enlarge)
1) Apply the grease on the shaft as shown.
(click to enlarge)
2) Insert the drive shaft into the outdrive and try to not remove the grease from the shaft.
NOTICE: Regularly replace the grease on the shaft.
