xrayxrayHome XRAY homeXRAY X-shopXRAY X-forumRCAmerica
supportsearchcontactguestbooksite map
newsproductsaboutusworldwide headlines

 
click to enlarge
(click to enlarge)

381155 M18 PRO LiPo Graphite Set – Silver
381155-K M18 PRO LiPo Graphite Set – Black
381155-B M18 PRO LiPo Graphite Set – Blue

• M18 PRO chassis set
• CNC-machined graphite
• includes: chassis, top deck, battery holder, top bumper upper holder
• molded composite parts (battery backstops, rear bumper)
• alu LiPo battery strap posts
• mounting hardware
• available in silver (#381155), black (#381155-K), blue (#381155-B)

click to enlarge
(click to enlarge)

M18 PRO chassis set in different stylish graphite finish. Includes CNC-machined graphite parts (chassis, top deck, battery holder and top bumper upper holder), molded composite parts (battery backstops, rear bumper), alu LiPo battery strap posts and mounting hardware.

click to enlarge
(click to enlarge)

click to enlarge
(click to enlarge)

click to enlarge
(click to enlarge)

Fits: M18PRO LiPo.



click to enlarge
(click to enlarge)

385609 Steel Pinion Gear 9T/48
385610 Steel Pinion Gear 10T/48
385611 Steel Pinion Gear 11T/48
385612 Steel Pinion Gear 12T/48
385613 Steel Pinion Gear 13T/48
385614 Steel Pinion Gear 14T/48
385615 Steel Pinion Gear 15T/48
385616 Steel Pinion Gear 16T/48
385617 Steel Pinion Gear 17T/48
385619 Steel Pinion Gear 19T/48
385621 Steel Pinion Gear 21T/48
385623 Steel Pinion Gear 23T/48

click to enlarge
(click to enlarge)
• Micro pinion gears
• For standard micro motors
• 48 pitch modul
• High-performance
• Tough & durable
• Steel material
• Precision-cut
• Chamfered edges
• Run-in
• Indvidually inspected
• Complete range available

High-performance 9 tooth, 48-pitch micro pinion gear, manufactured from special steel for toughness and durability. Precision-cut teeth with chamfered edges. Run-in for smooth operation.

click to enlarge
(click to enlarge)

Fits: M18, M18PRO, M18T, M18MT.

*************************************************************************************************

click to enlarge
(click to enlarge)

click to enlarge
(click to enlarge)
389912 Wheel Aerodisk M18 PRO (Hex Hub) - Rubber (2+2)

Solid dish rims for rubber tires. Wheels for use with drive shafts with hex adaptors ONLY. Will not fit on original M18 with original wheel mounting system. Set of 4 (front and rear).

Fits: M18 PRO
Will also fit M18/NT18 when used with drive shafts with hex adaptors and #385262 alu nuts.

*************************************************************************************************

click to enlarge
(click to enlarge)

click to enlarge
(click to enlarge)
Graphite main driveshaft made from top-grade graphite material is a direct replacement for the standard aluminum driveshaft. Lighter rotating mass (55% lighter as the alu driveshaft) results in much quicker accleration and precision balancing gives vibration-free running.

385511 Graphite Main Driveshaft M18, M18PRO
385521 Graphite Main Driveshaft M18T, M18MT

*************************************************************************************************

click to enlarge
(click to enlarge)

click to enlarge
(click to enlarge)
CNC-machined alu micro wheel axles for drive shafts with hex adaptors are made from tough, high-grade T6 aluminum. Ultra-smooth operation, high-precision design and fit. Provides extra strength for use with high-performance motors. Features 1.0mm and 2.0mm offset for wider track-width.

For use with hex-hub micro wheels only; will not fit original M18. Set of 2.

385253 M18PRO Alu Wheel Axle - Offset +1mm (2)
385254 M18PRO Alu Wheel Axle - Offset +2mm (2)

*************************************************************************************************

click to enlarge
(click to enlarge)

click to enlarge
(click to enlarge)
XRAY introduces a new 5-cell (6.0V) and a new 6-cell (7.2V) inline battery packs made from ultra-high performance Intellect IB1400mAh NiMH cells. These 2/3A cells offer low resistance and they will maintain their high voltage under load, allowing them to easily provide power to high-powered servos without a performance decrease.

click to enlarge
(click to enlarge)
The 1400mAh capacity is one of the highest capacities currently on the market, helping to ensure long life for long races. The pack features high-grade wiring and a pre-wired standard micro connector.

389113 Intellect Battery Pack 5-Cell 1400mAh NiMH - 6.0V
389114 Intellect Battery Pack 6-Cell 1400mAh NiMH - 7.2V

*************************************************************************************************

click to enlarge
(click to enlarge)

click to enlarge
(click to enlarge)
385203 Alu Drive Shaft with Hex Adapter - Set (2)

CNC-machined drive shafts with hex adaptors are made from tough, high-grade T6 aluminum and high-strength steel pins and fasteners. Ultra-smooth operation, high-precision design and fit. Provides extra strength for use with high-performance motors. This set of two drive shafts comes completely assembled, ready to install. A "must have" for serious drivers involved in high-competition racing. For use with hex-hub micro wheels only.

Fits: M18 PRO
Will also fit M18/NT18 when used with # 38954x wheels and #385262 alu nuts.

*************************************************************************************************

Other option parts

click to enlarge
(click to enlarge)

click to enlarge
(click to enlarge)
389163 XRAY Micro Motor 370 SuperSize

New premium 370 Supersize Micro Motor give 30% better performance (more power, more punch) than original 300 Supersize Micro Motor. Factory pre-assembled with surface-mount capacitor circuit board (no capacitors to solder), special noise filter, and pre-installed wires.

Fits: M18, M18T, M18MT

*************************************************************************************************

click to enlarge
(click to enlarge)
382107 Set of Suspension Arms 6° Caster - Hard (2)

Set of 2 molded harder-composite front upper suspension arms for XRAY M18 and NT18. These new arms have the same camber (-1°) as the stock upper arms, but less caster (6° caster vs. 12° caster stock). These arms provide improved steering, better handling into and out of corners. Highly recommended for serious racing and high competition… prepare to drop your lap times!

These new arms should only be used at the front of the car, not the rear.

Fits: M18, NT18

click to enlarge
(click to enlarge)
387541 M18 Nickel Coated Pivot Ball 4.2mm Type C (8)
387561 M18 Nickel Coated Pivot Ball 5.8mm Type A (8)
387562 M18 Nickel Coated Pivot Ball 5.8mm Type B (8)

Nickel-coated 4.2mm pivot balls (type C) and 5.8mm pivot balls (type A, B) for use in dusty conditions.

Fits: M18, NT18