 |
 |
| XRAY T2 008 EU Rubber-Spec 5-Cell Edition |
 |
| Part number: # 300010 |
 |
| Released: Nov. 28, 2007 |
|
|
|
 |
| |
|
Stock status:
|
(click to enlarge) |
|
|
Forward-thinking R/C car development... that is a very good way to describe XRAY ever since it came into the R/C car scene in 2000. With a long and distinguished history of racing achievements and ground-breaking, award-winning innovations, XRAY has... does... and will continue to offer the most advanced RC touring car on the market.
Based on the coveted and ultra-successful T2 and T2â™007 platforms, the new XRAY T2â™008 is a top-quality âśno-compromiseâť engineering marvel that was designed for a sole purpose... to put you in the winners circle.
âśRevolutionâť âśEvolutionâť âśOptimization.âť Key terms that describe how the T2'008 was realized. XRAYâ™s R&D and the factory driving teams have spent a great deal of time analyzing, testing and creating, all in the effort to bring you the very best optimized platforms for your racing needs. From the optimized suspension... through the optimized drivetrain... to the optimized chassis and top decks... every small detail has been optimized for particular racing conditions. Many of the features that made the T2'007 so successful have been carried over to the T2'008 with numerous details changed to make it even better than its predecessors.
With the changing landscape of R/C touring car racing, the T2'008 has been optimized to outperform in all different racing conditions, whether it be on asphalt or carpet, using rubber or foam tires, 5- or 6-cell or LiPo battery packs running the highest-performance brushed or brushless power plants. Look no further than XRAY... there is a T2'008 version that is optimized for each combination... all inclusive... all thatâ™s needed is the desire to win.
Pure design. Pure racing. Pure adrenaline.
Dipl. Eng. Juraj Hudy
Chief Engineer, XRAY |
|
(click to enlarge) |
|
| New T2â™008 Features: |
⢠Based on the highly-successful T2 / T2â™007 platform
⢠T2â™008 prototype put 10 cars in top 20, set TQ, and claimed Vice-Champion title at the 2007 European Championship and XRAY claimed the title of European Junior Champion
⢠Worldâ™s first purpose-designed car(s) to meet specific ROAR, EFRA, FEMCA regulations:
- US Foam-Spec 6-cell Edition (#30 00012) â“ ROAR Spec
- EU Rubber-Spec 5-cell Edition (#30 0010) â“ EFRA Spec
- EU Rubber-Spec 6-cell Edition (#30 0011) â“ ROAR, EFRA, FEMCA Spec
⢠Less sensitive to changing track conditions, super-consistent performance during all runs
⢠New centrally-positioned layshaft split bulkheads give improved balance due to better weight distribution of the centered motor position for faster left-right transitions
⢠New ultra-lightweight bulkheads CNC-machined from premium Swiss 7075 T6 aluminum
⢠New motor mount bulkhead positions the motor even lower creating ultra low center of gravity
⢠New super-lightweight composite front Solid Axle with XRAYâ™s smart Quick-change outdrive system for easier and faster out drive exchange (EU Edition only);
⢠New Solid Axle (EU Edition only) with the direct placement of drive shafts in outdrives eliminates play between drive shaft and outdrives, improving steering precision and increases overall steering
⢠New ultra-smooth composite adjustable ball-differential with XRAY Labyrinth Dust Covers™ (US Edition front + rear, EU Edition rear only); eliminates need for drive shaft blades = reduced servicing costs
⢠Individual optimized drive train ratioâ™s for specific foam- and rubber-tire racing conditions:
- US Edition: 34T front & rear diff pulleys / 20T center layshaft pulleys
- EU Edition: 38T front & rear diff pulleys / 16T center layshaft pulleys |
|
(click to enlarge) |
|
|
⢠Specially-optimized drive shaft lengths for specific foam- and rubber-tire racing conditions:
- US Edition: standard 50mm CVD drive shafts for use with foam tires (which are generally higher traction than rubber tires); optimum transfer of traction to the wheels
- EU Edition: new longer 52mm front/rear CVD drive shafts positioned more towards centerline in diff/solid axle outdrives to generate more overall traction and make the car easier to drive on low-traction tracks
⢠New position of rear diff for improved forward traction
⢠New premium-quality, longer rear drive belt
⢠Drive shafts and pulleys are fully compatible and interchangeable between EU and US Editions
⢠New narrow top decks (both EU and US Editions)
⢠Servo saver positioned in absolute center of the chassis
⢠New center aluminum top deck mount specially designed for rubber tires on carpet â“decreases front suspension traction and eliminates front tires overheating, ensuring consistent handling during runs
⢠New front bulkheads with extra reinforcement legs allow for additional chassis flex adjustment from the bottom of the chassis
⢠New front and rear diff height adjusters allow independent adjustment of diff height
⢠New longer front & rear suspension arms for improved traction and easier handling
⢠New optimized shock mounting position for improving steering and traction
⢠Both suspension arms feature incorporated anti-roll bar mounts, with rear arms featuring two different anti-roll bar mounts for super-fine adjustment of anti-roll bar; EU Edition includes both front and rear 1.2mm anti-roll bars |
|
(click to enlarge) |
|
|
⢠New C-hubs with larger opening for easier & faster assembly/disassembly of the CVDs; prevents binding of CVD with C-hub in serious crashes
⢠New C-hubs available in all standard caster angles (2°, 4° and 6°) and two different hardnesses (EU ⓠmedium, US ⓠhard)
⢠New rear uprights with integrated 0° toe-in to improve stability; available in two hardness (EU ⓠmedium, US ⓠhard)
⢠Steering blocks available in two hardness (EU ⓠmedium, US - hard)
⢠New front suspension arms allow 2mm adjustment of front arm position
⢠New front & rear lower shock towers for lower CG and improved steering response
⢠Rear shock tower features new extra position for Quick Roll-Center™ position, the new upper position allows the complete rear upper link to be positioned higher for improved cornering speeds in long sweepers on open tracks
⢠New front shock tower specially machined for ultra-low weight without compromising strength
⢠New shorter shock body and shock shaft for improved suspension lift
⢠Front & rear shock towers feature new shock positions optimized for new shorter shock absorbers
⢠New middle alu layshaft with centrally-positioned spur gear for improved balance
⢠Overall reduction in car weight
⢠EU Edition available in two different interchangeable chassis versions: 5-cell and 6-cell
⢠Brushless system ready and optimized
⢠LiPo 3200mAh ready and optimized (LiPo 4800mAh fits EU 2.5mm chassis only) |
|
(click to enlarge) |
|
| T2â™008 EU Rubber-Spec 5-Cell Edition â” Extra Features: |
⢠EU Rubber-Spec Editions are specially designed for rubber tire racing conditions
⢠5-cell, 2.5mm chassis
⢠Narrow top deck
⢠New hard rubber-spec front and rear suspension arms â“ marked with âśHâť
⢠New medium rubber-spec steering blocks, C-hubs, and rear uprights
⢠New front XRAY Composite Solid Axle
⢠New super-smooth adjustable composite rear ball-differential with XRAY Labyrinth Dust Covers™
⢠New longer 52mm Hudy Spring Steel CVD drive shafts
⢠38T front and rear pulleys / 16T center layshaft pulleys
⢠Front silver and rear gold racing springs
⢠84T 48P spur gear ⓠextra-hard material, wobble-free design
⢠1.2mm front and rear anti-roll bars
⢠EFRA, ROAR, FEMCA spec for modified and stock racing |
|
(click to enlarge) |
|
| Main Specifications: |
⢠All parts fully interchangeable between US Foam-Spec and EU Rubber-Spec editions
⢠XRAY Quick Roll-Centers™ ⓠ4 quick roll center adjustments front and 6 quick roll center adjustments rear
⢠Race-proven T2 suspension geometry featuring lightweight, strong, and durable suspension parts
⢠Rebuildable CVD driveshafts made from special world-renowned, top-secret, self-developed HUDY Spring Steel™; worldâ™s tiniest yet most durable driveshafts are hand ground for maximum precision
⢠New ultra-lightweight front and rear split bulkheads are CNC-machined from premium Swiss 7075 T6 aluminum, allowing super-easy diff and layshaft access
⢠New centerline drivetrain concept with ultra-narrow chassis positions batteries and electronics near car centerline
⢠Long top deck design minimizes tweak and increases stability
⢠Lightweight middle layshaft CNC-machined from aircraft aluminum
⢠Front lower and upper composite bumper made from special composite material to withstand hard impacts
⢠Compact front foam bumper made from lightweight, high-resilience foam
⢠Thick 6mm body posts withstand serious crashes and provide maximum support for the body shell.
⢠Front and rear top deck aluminum posts on US Foam-Spec Edition are integral parts of Multi-Flex Technology™
⢠Lower suspension alu holders with three different roll center positions
⢠Small, robust rear uprights with built-in 0° toe-in feature two upper roll center positions which are easily adjusted using shims
⢠Easily adjustable inboard toe-in using included shims
⢠7075 T6 aluminum wheel hubs
⢠Easily adjustable wheel offset using optional shims or optional offset wheel hubs (-0.75mm, +0.75mm, +1.5mm)
⢠New shorter XRAY 4-step externally-adjustable shocks
⢠Shock shafts are specially hardened for maximum strength
⢠Shock absorber foam inserts for perfect shock rebound
⢠XRAY self-developed and manufactured ultimate racing springs are manually selected for maximum precision, equal length, and equal damping characteristics
⢠Small 4° caster C-blocks from special composite material, optional 2° and 6° caster blocks available
⢠Small, robust steering blocks made from special composite material, featuring two Ackermann positions
⢠Front and rear shock towers CNC-machined from 3mm graphite material with optimized shock positions for rubber and foam tires, include optimized Quick Roll-Center™ positions
⢠Super easy to build, maintain, set up, and drive
⢠Unique XRAY Quick-Saver™ - 5 different Ackermann positions can be set thanks to smart adjustable servo saver
⢠Aluminum self-locking wheel nuts |
|
(click to enlarge) |
|
| Other Specifications: |
⢠Pure racing design, long life, ultra-stiff touring car
⢠Very easy assembly/disassembly and maintenance
⢠Fully independent, fully-adjustable suspension
⢠Highly-efficient 2-belt, 4WD system with worldâ™s lowest CG
⢠High-performance drive belts
⢠Centrally-positioned servo saver
⢠Adjustable Ackermann settings achieved by repositioning the bellcrank post forward or backward + 5 additional positions available through XRAY Quick-Saver™
⢠Inline battery pack positioned along one side
⢠Composite battery backstops prevent battery movement on chassis
⢠Adjustable ultra smooth lightweight composite ball differential with carbide balls and carbide axial thrustbearing
⢠Belt tensioning adjustment in both front and rear bulkheads
⢠Strong aluminum servo stands
⢠Adjustable HUDY Spring Steel™ turnbuckles (steering, front & rear upper links)
⢠Complete set of high-speed, blue-sealed ball-bearings, degreased, lightly oiled for maximum efficiency, individually controlled, selected, and inspected |
|
(click to enlarge) |
|
| Adjustment Possibilities: |
⢠Fully-adjustable front and rear suspension geometry: caster, camber, toe, anti-dive, anti-squat, ride height, droop, track-width, roll center, and wheelbase
⢠XRAY Quick-Saver™ offers 5 different Ackermann positions for steering adjustment
⢠Adjustable ball differentials
⢠XRAY Quick Roll-Centers™
⢠Adjustable bulkheads for belt tension control
⢠Front and rear diff height adjustment
⢠Adjustable HUDY Spring Steel™ turnbuckles (steering, front & rear upper links)
⢠Multiple upper shock mounting locations at front and rear
⢠Externally-adjustable racing shocks (4-step)
⢠Pre-drilled chassis locations for optional chassis weights
⢠Adjustable front and rear anti-roll bars (optional for US Edition only) |
|
(click to enlarge) |
|
|
(click to enlarge) |
|
| XRAY T2 platform |
Since the release of the first T1 in 2001, XRAY has become synonymous with quality, workmanship, performance, and luxury in the RC world. With countless victories and national titles from all around the world â” including 16x title of US National Champion, 2x European Junior Champion and multiple European Vice-Champion, and with multiple Car of the Year Awards â” XRAY touring cars have become the worldâ™s most favorite touring car as voted in the Readerâ™s Choice Awards. Over the years, XRAYâ™s Engineering Department has continued its ongoing development, bringing with it a fresh new version of its touring car platform, always superseding and improving upon its predecessors.
|
|
(click to enlarge) |
|
| New XRAY T2â™008 |
Based on the very successful T2 and T2â™007 platforms, XRAY now presents the improved and refined XRAY T2â™008. For the first time, XRAY has purposefully designed a touring car for both foam tire racing and rubber tire racing â” and also taking into account the 5-cell and 6-cell racing rules â” to gain a distinct edge in the highly-competitive spectrum of foam and rubber tire racing.
|
|
(click to enlarge) |
|
| European Champion Platform |
In its first event, the European Championships, Team XRAY & the pre-production XRAY T2'008 took the TQ position and the title of European Vice-Champion and accounted for 10 out of the top 20 positions and placed 4 cars in the A main final and at the end gained the title of European Junior Champion... one of the worldâ™s most successful debuts ever.
|
|
(click to enlarge) |
|
| T2â™008 EU Rubber-Spec vs. US Foam-Spec Editions |
Whether you are racing with foam or rubber tires⦠with 5-cell or 6-cell batteries⦠or on either carpet or asphalt⦠there is a T2â™008 for you. You can choose between the US or EU Editions and have a car that is finely tuned for each specific racing environment. Despite both cars being built from the same platform and sharing all the same goodies, both cars have very small details that enable you to gain an edge in competitive performance.
|
|
(click to enlarge) |
|
|
(click to enlarge) |
|
| Optimized Drivetrain |
The ultra-efficient XRAY drivetrain has been improved again by optimizing the drivetrain concept for particular foam and rubber chassis versions, so as to obtain maximum efficiency for the particular conditions. Both of these racing conditions are completely different, XRAY is the first company to optimize the drivetrain for particular racing classes.
For rubber tire racing, where rubber tires have larger diameter, the pulley diameters have been increased to 38T diff pulleys along with smaller 16T center layshaft pulleys. The most frequently used diff combinations have been incorporated into the car design, so now the front axle features the all new ultra-lightweight XRAY Composite Solid Axle and new rear adjustable lightweight composite ball differential.
For foam tire racing where foam tires have smaller diameters, the pulley diameters used maximize the efficiency of the drivetrain: 34T front & rear diff pulleys along with larger 20T center layshaft pulleys. Again, the most frequently used diff combinations have been incorporated and the car features new front and rear adjustable lightweight composite ball differentials.
|
|
(click to enlarge) |
|
|
(click to enlarge) |
|
| Optimized Drive Shaft Lengths |
Not only have the drive train been optimized, but also the transfer of power to the wheels â“ through the drive shafts â“ Both have been optimized for both rubber and foam racing conditions.
For rubber tire racing, new longer 52mm drive shafts are used to allow the drive shafts to be positioned more towards the cars centerline in the out drive of the diff/solid axle. This generates more overall traction and makes the car easier to drive on low-traction tracks.
For foam tire racing, standard 50mm drive shafts are used as the foam tires have generally higher traction than rubber tires and as such the shorter drive shafts have optimum transfer of torque to the wheels.
|
|
(click to enlarge) |
|
| Lightweight Composite Solid Axle |
When it comes to the high performance cutting edge there is no compromise at XRAY. Rotating mass has one of the most significant influences on the performance of the racing cars, and as such XRAY constantly keeps developing both designs and materials to bring new & improved products to provide better performance and handling. With the highest-performance DNA in its blood, XRAY proudly presents the all-new unique lightweight composite XRAY Solid Axle. The Solid Axle has a very stiff structure and ultra-light weight that was achieved by injecting the entire solid axle from XRAYâ™s own self-designed & mixed lightweight composite material.
The outdrives are fully exchangeable which allows very easy and comfortable servicing, while the unique drive shaft connection â” now eliminating the former drive shaft blades â” enables direct power transfer to the axle and eliminates play between the drive shaft and outdrives, improving steering precision and increasing overall steering.
The XRAY Solid Axle is included only in the EU Edition, but is available as an option for the US Edition.
|
|
(click to enlarge) |
|
| Lightweight Composite XRAY Ball Differential |
The new composite XRAY Ball Differential is not only lighter but it also provides smoother diff action. The composite lightweight differential incorporates separate diff outdrives which are easily removable for super-easy servicing, and the construction of the drive shaft connection of the drive shaft to the diff outdrives â” without the use of drive shaft blades â” enables direct power transfer to the diff and eliminates play between the drive shafts and outdrives. XRAYâ™s innovative yet very smart Labyrinth Dust Cover™ diff protection system has been carried over from the previous T1/T2 platforms where it has been very successfully used for many years. The special internal labyrinth design of the diff covers prevents any dirt, debris, and carpet fibers from getting into the differential and as such reduces servicing and ensures longest life of the differential.
The new adjustable, composite XRAY Ball Differential features carbide balls and a high-quality carbide thrustbearing for ultra-smooth running.
The US Edition features both front & rear ball differentials with 34T pulleys. The EU Edition features a rear ball differential with 38T pulley.
|
|
(click to enlarge) |
|
| Blade-free Drivetrain Concept |
The new Solid Axle and Ball Differential were designed with both performance and customer satisfaction in mind. The interchangeable and replaceable outdrives on both the Solid Axle and Ball Differential do not have traditional slots and cut-out for drive shaft insertion with protective drive shaft blades⦠but rather the outdrives feature inner slots for direct fit of the drive shaft pin. This design enables the drive shafts to be used without drive shaft blades, minimizing operating costs. Moreover the direct, snug fit of the drive shaft pins has no play and vibration during the operation of the drive shafts.
|
|
(click to enlarge) |
|
| Ultra-lightweight Aluminum Bulkheads |
All new ultra-lightweight bulkheads have been completely redesigned and are a work of engineering art, where luxury meets simplicity and practicality. The bulkheads are CNC-machined from premium Swiss 7075 T6 aluminum and were strategically machined to provide the lightest possible skeleton support framework for the car, and thanks to the ultra-low platform it was possible to create the lowest, smallest, and lightest bulkheads ever.
The rear bulkheads feature a split design, allowing the rear suspension to be mounted to separate bulkheads while the center layshaft sits on its own, even narrower bulkheads which are even positioned even closer to the center of the chassis. XRAYâ™s attention to detail is noticeable with all the precisely chamfered edges. The split design of the bulkheads also enables extra-easy access to front and rear differentials and middle layshaft. Changing the diffs and spur gear is quick and easy.
|
|
(click to enlarge) |
|
| 3 Different Chassis |
There are 3 different chassis available for the T2â™008, each specially designed and optimized for the particular type of racing conditions where the car will be used. The EU Edition which was designed for rubber tire racing features a 2.5mm thick chassis CNC-machined from premium grade graphite material, and itself is also available in two different versions: 5-cell or 6-cell. The US Edition was designed for 6-cell foam tire racing, and features an ultra-thick 3.5mm CNC-machined chassis of premium-grade graphite material.
|
|
(click to enlarge) |
|
| US Edition Milled Chassis |
The extra-thick, extra-stiff chassis features milled pockets. This allows the bulkheads and all other parts to be mounted very low, in fact they are at the level as the standard 2.5mm chassis. The extra thickness of the chassis enables the car to achieve an ultra-stiff torsion and flex setting required for high-competition foam tire racing. XRAY knows that even the smallest detail has an impact on the handling and performance of the car. So, every chassis is CNC-machined in-house by XRAY using the most modern German milling machine which is fully robotically operated and controlled to ensure that every chassis meets the tightest manufacturing tolerances.
|
|
(click to enlarge) |
|
| EU Edition Top Deck |
The new EU Edition top deck was specially redesigned and optimized for rubber tire racing conditions. The very narrow design provides sufficient torsion and flex while the top deck has been prolonged to provide elongated flex, thus reducing unwanted tweak in crashes. The very low bulkheads allow prolonging the top deck up to the central layshaft, and prolonging it over the motor mounting area.
|
|
(click to enlarge) |
|
| US Edition Top Deck |
The new US Edition top deck is purposefully wider in the front, allowing the top deck to be connected to the chassis with aluminum stands, creating a solid platform for high-traction foam tire racing. The rear separate top deck mount features the same extra-wide design allowing the rear top deck mount to be connected to the chassis via aluminum stands.
|
|
(click to enlarge) |
|
| Top Deck Mount |
New center aluminum top deck mount was specially designed for rubber-tire carpet racing which permits decreased front suspension traction and eliminates front tires from overheating, ensuring consistent handling throughout an entire run. The aluminum center top deck mount can be easily mounted or removed depending on the particular racing conditions.
|
|
(click to enlarge) |
|
| Front Bulkhead Reinforcement Legs |
The new front bulkheads were specially designed to allow adjustment of front chassis flex for different racing conditions. The lower part of the front bulkheads features reinforcement legs which can be easily mounted to the chassis (via 2 extra screws) which influences the front flex of the chassis; removing the screws from the reinforcement legs gives additional chassis flex.
|
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
(click to enlarge) |
|
| Diff Height Adjustment |
Both front and rear bulkheads feature diff height adjustment independently front and rear. By rotating the diff eccentric holders, the height of the diff can be adjusted by 1mm. Optional eccentric holders with 2mm offset (#302077) are available which will additionally allow the diff height adjustment by 2mm.
|
|
(click to enlarge) |
|
| Motor Lower Mounting Position |
The aluminum motor mount bulkhead mounts the motor even lower, thus placing the CG even lower than before. The chassis area below the motor has been additionally milled out to allow the motor to sit as low as possible.
|
|
(click to enlarge) |
|
| More Forward Traction |
The position of the rear differential has been moved more towards the rear of the chassis to provide more forward traction. With the new position of the differential, a new and longer rear drive belt was incorporated.
|
|
(click to enlarge) |
|
| Drive Belts |
The 2-belt 4WD drivetrain concept provides maximum efficiency and highest performance using ultra-high durable drive belts. Narrow (3mm) front and rear drive belts have been specially ground for minimum thickness and flexibility. The front drive belt has been carried over from the previous T2 platform, while a new longer rear drive belt has been included to accommodate the new rear diff position.
|
|
(click to enlarge) |
|
| Centrally-positioned Layshaft |
The middle layshaft was strategically positioned towards the center of the chassis on separate, super-narrow middle layshaft bulkheads positioned along the chassis centerline. The middle drive pulleys are positioned along side of the main spur gear and as such the drivetrain energy is transmitted from the motor through the centrally positioned spur gear to both middle layshaft pulleys⦠ensuring maximum balance of the car.
|
|
(click to enlarge) |
|
| Alu Middle Layshaft |
The new aluminum layshaft has been strategically CNC-machined to minimize rotating weight without compromising strength or integrity. The hollow layshaft is perfectly round with zero runout, eliminating drivetrain vibration and producing a positive balance. Composite pulleys key solidly to the layshaft. The new middle layshaft composite holders have a new updated shape to fit into the new bulkheads. The front and rear upper top decks capture the holders in levered areas.
|
|
(click to enlarge) |
|
| Proven Suspension Geometry |
From the narrow arms, through the tiny front and rear suspension blocks, to the smaller more robust steering blocks, every suspension part has been specially designed and optimized to provide responsive racing characteristics in all racing conditions. Over the years XRAY has successfully gained and utilized extensive suspension geometry knowledge and self-developed suspension stiffness technology, which have been utilized when designing the T2 suspension parts. The ultra-lightweight suspension parts are molded from a special composite material that makes the parts very light yet very durable to withstand the rigors of high-performance racing.
The T2â™008 features new optimized, longer lightweight suspension arms for improved traction and easier handling. The arms feature a single optimized shock mounting position and integrated anti-roll bar mounts. The rear arms feature two anti-roll bar mounts for super-fine adjustment of the anti-roll bar.
The EU Rubber-Spec Edition features standard hard composite mixture arms, labeled with âśHâť. The US Foam-Spec Edition includes well-proven, extra-hard arms (marked with âśXHâť) manufactured from specially-formulated composite compounds which makes the arms extra stiff.
The new shorter front suspension arms allow 2mm of adjustment of front arm position.
|
|
(click to enlarge) |
|
| New C-hubs |
New C-hubs have larger openings for quicker & easier assembly/disassembly of the CVDs. The entire CVD assembly can be easily inserted/removed through the C-hub without the need of disassembly. The larger openings prevent collision of CVD with C-hub in serious crashes.
The new C-hubs are available in all standard caster angles (2°, 4° and 6°) and are also available in two different hardnesses that are optimized for particular racing conditions. The EU Edition includes medium hardness (M) C-hubs specially optimized for rubber tire racing, while the US Edition includes hard hardness (H) C-hubs that are well proven to provide a solid and stiff suspension for foam tire racing.
|
|
(click to enlarge) |
|
| New Rear Uprights |
The new rear uprights feature built-in 0° toe to improve stability and prevent suspension geometry changes in serious crashes. There are two different roll center positions on the rear uprights, and more roll center positions can be easily adjusted by adding shims between the upright and the turnbuckle ball joint.
The rear uprights feature small but robust 5x10 ball-bearings thus minimizing unsprung weight.
The rear uprights are available in two different hardnesses which optimized for particular racing conditions. The EU Edition includes medium hardness (M) uprights specially optimized for rubber tire racing, while the US Edition includes hard hardness (H) uprights that are well proven to provide a solid and stiff suspension for foam tire racing.
|
|
(click to enlarge) |
|
| Steering Blocks |
The steering blocks each feature two Ackermann positions. The front steering blocks also feature small but robust 5x10 ball-bearings thus minimizing unsprung weight.
The steering blocks are available in two different hardnesses which are optimized for particular racing conditions. The EU Edition includes medium hardness (M) steering blocks specially optimized for rubber tire racing, while the US Edition includes hard hardness (H) steering blocks that are well proven to provide a solid and stiff suspension for foam tire racing.
|
|
(click to enlarge) |
|
| Anti-Roll Bars |
When it comes to optimization, XRAY knows no limits and as such not only the suspension geometry and hardnesses were optimized for rubber tire racing, but also due to the fact that anti-roll bars are almost always used for rubber tire racing, XRAY includes optimum standard 1.2mm front and rear anti-roll bars. The anti-roll bars are mounted with the included composite holders to the front and rear bulkheads, and are easily mounted to the integrated anti-roll bar mounts on the suspension arms.
For easy recognition the anti-roll bar has two laser-engraved stripes that represent the 1.2mm thickness symbol for easy and instant recognition. Optional anti-roll bars are available for super-fine and precise anti-roll bar adjustment.
|
|
(click to enlarge) |
|
| XRAY Quick Roll-Centers™ |
XRAYâ™s self-developed Quick Roll-Centers™ make setup quick & easy. The front and rear shock towers feature pre-set optimized roll center positions. Using the eccentric aluminum roll center holders you can easily choose one of 4 quick roll-center positions on the front shock tower; the rear shock tower features two new extra positions, making a total of 6 different quick roll-center positions. Easy, smart, quick.
The new extra positions for Quick Roll-Center positions allow the complete rear upper link to be positioned higher for improved cornering speeds in long sweepers on open tracks.
|
|
(click to enlarge) |
|
| Graphite Shock Towers |
New lower front and rear shock towers are CNC-machined from premium 3mm thick graphite material to guarantee maximum strength and long life and the lower height allows the shocks to be mounted lower and thus putting the CG even lower. The new front shock tower was specially machined for ultra-low weight without compromising strength. The new lower shock towers provide improved steering response.
The shock towers feature new shock mounting positions optimized for new shorter shock absorbers. The shock towers feature different positions for Quick Roll Center™ settings. The all-in-one shock towers are optimized for use with rubber or foam tires.
|
|
(click to enlarge) |
|
| New Shorter XRAY Racing Shocks |
The T2â™008 features new shorter, race-proven, externally-adjustable XRAY racing shocks. The new shorter shock body and shock shaft were designed for improved suspension lift and lower CG.
The XRAY externally-adjustable racing shocks allow quick & easy damping adjustment up to 4 different damping settings without disassembling the shocks. The threaded shock bodies enable easy and fine ride height adjustment. The shocks also feature foam membrane inserts for smoother shock operation. Shock rods are specially hardened to guarantee long life and maximum strength.
|
|
(click to enlarge) |
|
|
(click to enlarge) |
|
| LiPo & Brushless Ready |
The T2â™008 is LiPo ready and optimized. Both EU and US Editions allow the use of LiPo 3200mAh packs, with EU Edition 2.5mm chassis (only) accepting LiPo 4800mAh packs as well. The T2â™008 electronics and motor placement have been optimized and long-term tested with brushless systems to provide maximum efficiency and best weight balance.
|
|
(click to enlarge) |
|
| Low-CG Touring Car Platform |
The ultra-low touring car platform of the T2â™007 has been carried over to the T2â™008 to provide the worldâ™s lowest CG ever.
|
|
(click to enlarge) |
|
|
(click to enlarge) |
|
| Belt Tension Adjustment |
As with previous XRAY cars, both front and rear bulkheads feature integrated belt tension adjustment through the use of adjustable bearing eccentric holders, eliminating the need for a separate belt tensioner. All ball-bearings turn in composite hubs to reduce friction and improve drivetrain efficiency.
|
|
(click to enlarge) |
|
| Narrow Chassis |
The overall ultra-narrow chassis platform was made possible thanks to the ultra-narrow positioning of the middle layshaft bulkheads in the centerline of the chassis. All the electronics have been positioned even closer to the chassis centerline, improving weight transition during the quick changes in direction in racing. In particular the motor was moved more towards the centerline, which alone significantly improves the carâ™s balance and responsiveness.
|
|
(click to enlarge) |
|
| XRAY Quick-Saver™ |
The hugely successful XRAY Quick-Saver™ has been carried from the T2â™007, it being another brand new innovation from the design boards of XRAYâ™s Engineering Department. Thanks to the fully-adjustable Quick-Saver™, in a matter of seconds you can change the steering characteristics by adjusting the servo saver to one of 5 preset Ackermann positions. The servo saver comes factory pre-built, guaranteeing exceptionally smooth, responsive, and precise steering. The alloy central shaft holds a pre-built strong preload spring.
|
|
(click to enlarge) |
|
|
(click to enlarge) |
|
| Adjustable Steering Bell-crank |
An adjustable position steering bell-crank is also used to change steering Ackermann settings. By turning a pair of composite eccentric bushings in the chassis and top deck, you can move the complete assembly forward or backward. This is in addition to the five (5) Quick-Saver™ Ackermann positions to choose from. The bell-crank is supported by two ball-bearings.
|
|
(click to enlarge) |
|
| Precision Spur Gears |
Precision-molded spur gears are made from XRAY's exclusive secret blend of composite material, allowing the gear to run true, be super quiet and robust enough to handle low-wind modified motors. The spur gears are strategically designed to have the lowest possible weight while keeping them strong and light. Each gear is stamped with the tooth number for easy identification.
The EU Rubber-Spec Edition features a 84T 48-pitch spur gear, while the US Foam-Spec Edition features a 116T 64-pitch spur gear.
|
|
(click to enlarge) |
|
| Premium Ball-Bearings |
⢠Fully ball-bearing equipped; 20 bearings in the kit
⢠High-speed, blue-sealed ball-bearings throughout the drivetrain for maximum drivetrain efficiency
⢠Highest tolerance and maximum performance bearings
⢠Small-size ball-bearings used in steering blocks and uprights reduce unsprung weight
⢠Ball-bearings are degreased and lightly oiled with Aero Shell® Fluid 12 for maximum smoothness and long life
⢠High-quality carbide thrust bearings for adjustable ball differential
|
|
(click to enlarge) |
|
| XRAY Suspension Holders |
The T2â™008 uses the smart suspension holders from the T2 platform. The aluminum inserts in the composite holders guarantee that geometry and setup will not change and will be retained even after heavy crashes.
There are 3 different suspension composite holders that enable easy roll center setup. The standard suspension holder features 0mm roll center, and the two eccentric suspension holders raise or lower the roll center by 0.75mm.
The smart XRAY geometry uses variable shims between the bulkheads and suspension holders to enable easy rear toe-in adjustment. However, you can easily remove the shims which will narrow the suspension, and then add wheel offset shims to reclaim track-width.
|
|
(click to enlarge) |
|
| HUDY Spring Steel™ Drive Shafts |
The T2â™008 drive shafts are the worldâ s tiniest yet most durable driveshafts used in electric touring cars. These premium driveshafts have been exclusively manufactured from special world-renowned, top-secret, self-developed HUDY Spring Steel™.
The drive shafts lengths have been optimized for both rubber and foam tire racing, and as such the EU Edition features new longer 52mm front/rear drive shafts while the US Edition features standard length 50mm drive shafts.
The drive shafts have been strategically lightened ⓠsee the hollow end of the dogbone ⓠto guarantee the lowest possible weight without compromising strength or durability. These specially-lightened drive shafts can only be manufactured from special HUDY Spring Steel™ which was developed for extreme racing conditions. The driveshafts have been additionally hand-ground for maximum precision and to provide true rotation and unbinding drivetrain operation.
The lightweight constant velocity universal drive shafts are easily rebuildable. The new solid axle and composite ball differential no longer required the use of low-friction drive clips, thus guaranteeing highest value and minimizing servicing costs.
|
|
(click to enlarge) |
|
| Alu Wheel Axles & Hubs |
Ultra-lightweight wheel axles are CNC-machined from 7075 T6 aluminum and feature ultra-true hex hubs which guarantee wobble-free wheel mounting. The wheel axles are specially machined to reduce rotating weight. Optional hex hubs with different offsets are available (-0.75, +0.75, +1.5mm).
|
|
(click to enlarge) |
|
| HUDY Spring Steel™ Turnbuckles |
All adjustable turnbuckles used in the T2â™008 are manufactured from the world-renowned, ultra durable HUDY Spring Steel™. The turnbuckles have incredible long life and maximum strength. A versatile turnbuckle tool is included in the kit.
|
|
(click to enlarge) |
|
| Shock Pistons |
XRAY keyed shock pistons can be used to make adjustable or non-adjustable shocks. Along with the 2-piece adjustable shock pistons, 3 different non-adjustable pistons are included.
|
|
(click to enlarge) |
|
| XRAY Racing Springs |
Both EU Rubber-Spec and US Foam-Spec Editions feature shock springs which have been carefully selected for different racing conditions. The EU Edition features proven gold and silver springs, while the US Edition features light-purple and white springs.
As with all other XRAY springs, these springs were manually measured and selected to guarantee precisely equal length and damping characteristics.
|
|
(click to enlarge) |
|
| XRAY Selected Springs |
For additional tuning, XRAY offers complete sets of ultimate shock springs. XRAY self-developed and manufactured ultimate racing springs are manually selected for maximum precision, equal length, and equal damping characteristics. Available separately or as an ultimate set #308390 and #308380.
|
|
(click to enlarge) |
|
| Body Posts |
Beefy 6mm thick body posts are made from special composite material that provides maximum strength but sufficient flex to reduce body post breakage even if you flip the car over. The body supports are rounded to have a better fit and provide better support to the car body.
For ultimate tuning and adjustment, XRAY offers optional body height adjustable body posts which allow the independent front & rear body height adjustment by +1mm (#301323 + #301333) or by +2mm (#301324 + #301334).
|
|
(click to enlarge) |
|
| Front Bumper |
The compact front foam bumper is manufactured from high-resilience lightweight foam. The front lower composite bumper and upper bumper holder are molded from rigid composite to withstand heavy crashes.
An optional stiffer foam bumper is available (#301223) as well as an impact-absorbing lower bumper (#301203).
|
|
(click to enlarge) |
|
| Adjustment Possibilities |
The extensive and impressive range of adjustment possibilities includes: caster, camber, toe, anti-dive, anti-squat, ride height, downstops, track-width, lower roll center, Quick Roll Center™, steering roll center, wheelbase, Ackermann, belt tension adjustment, chassis flexibility, top deck flexibility, 4 step adjustable shocks, adjustable diffs (US and EU Editions). Suggested to use #108255 HUDY All-In-One Set-up Solution for 1/10 Touring Cars.
|
|
(click to enlarge) |
|
| Chassis Balance |
The chassis design focuses on balanced weight distribution and weight transfer. The chassis features pre-drilled holes for additional weights for optimum car balancing. Centerline holes are pre-drilled for easy balancing with the HUDY Chassis Balancing Tool #107880.
|
|
(click to enlarge) |
|
| Premium HUDY Greases |
The T2â™008 includes premium #106210 HUDY Graphite Grease a #106211 HUDY Diff Grease.
HUDY Graphite Grease is a high-performance, advanced-technology semi-fluid lubricant which incorporates both extreme pressure additives and finely-dispersed graphite for load carrying. It is intended primarily for the lubrication of rotating parts and loaded gears. In addition to providing outstanding load carrying, it is formulated to have excellent adhesion and resistance to "fling-off" under extreme conditions. The grease reduces wear and increase the parts life.
HUDY Diff Grease is a high-performance, model racing car general-purpose silicone based grease, formulated to provide extra protection against wear, corrosion, and water. HUDY Diff Grease is recommended for most types of rotating and moving parts in any RC car. This silicone grease is especially well-suited for use in ball differentials, axial (thrust) bearings, and in any other ball-bearings that require grease. Suggested for use in any heavy-duty application where high pressures or loads are present. This grease provides excellent protection against rust and corrosion while resisting water wash-out, making it particularly suitable for racing in wet conditions. The silicone grease operates within a large temperature spectrum and will work in all extreme conditions up to and over 100°C.
|
|
(click to enlarge) |
|
| Optional Battery Holder |
Being a high-competition racing car, the T2â™008 uses tape to hold the batteries to the chassis to reduce unnecessary weight. However, the chassis features holes for an optional graphite battery strap which features the XRAY Smart Battery Holder System™. An aluminum capture wheel enables you to easily secure the battery strap without any clips. Easy, smart, quick. There are two different battery holders (#306164 or #306163) available for either 5-cell or 6-cell battery packs.
The race-oriented XRAY battery holder was designed to ensure it won't tweak or stiffen the chassis. The capture wheel allows sufficient play and will not stiffen the chassis even if you tighten the capture wheel excessively.
|
|
(click to enlarge) |
|
| XRAY Set-up Book |
The T2â™008 remains the most adjustable electric touring car in the world. Whether you are a hardcore racing fanatic or a club-level sportsman, you can very easily adjust the T2â™008 to suit your racing style, the race track, and all track conditions. The T2â™008 features the bestselling XRAY Set-up Book with more than 50 pages loaded with high-quality pictures and easy-to-read and understand RC car set-up explanations. Whether you are a novice driver or an experienced racer, you can easily learn many set-up tips & tricks and improve your set-up skills, ultimately translating into improved racing performance with your T2â™008.
|
|
(click to enlarge) |
|
| XRAY Instruction Manual |
XRAY Instruction Manuals have become the industry standard, being simply the best manuals you will ever get with an RC model car. Whether you are a first-time builder or an experienced racer, all the instructions are straight-forward and easy to understand. The full-colour instruction manual contains large 3D illustrations that show all assembly details in the clearest possible way.
|
|
(click to enlarge) |
|
| XRAY VIP Customer Treatment |
| Owning an XRAY model racing car is an experience on its own. Not only will you own the most premium luxury model racing car in the world, but you will also become a member of the prestigious family of XRAY owners with direct support and service from the XRAY factory. XRAY brings you the most up-to-date RC Web site on the Internet, with daily racing news and latest product developments. If you have any questions, problems or comments, you can ask the XRAY Support Team or any XRAY Factory Team Driver on the XRAY Support Forum. You can even upload your own set-up sheets or download from the thousands of different set-up sheets available from all around the world at the exclusive XRAY Virtual Set-up Sheet Database. And that is only the start of the VIP treatment you get by joining Team XRAY. |
|
|
|
|
