xrayxrayHome XRAY homeXRAY X-shopXRAY X-forumRCAmerica
supportsearchcontactguestbooksite map
newsproductsaboutusworldwide headlines
click to enable quick search
 
Chassis T1FK 05 - 3.0mm Graphite - CNC Machined
#301113

Optional 3.0mm thick high-quality CNC-machined graphite chassis for XRAY T1FK’05. This chassis is 0.5mm thicker than the standard #301112 T1FK’05 chassis, allowing for an overall stiffer chassis; recommended for a high grip conditions such as foam carpet racing.  



Chassis T1FK'05 - 2.0mm Graphite for 3700
#301114

Optional 2.0mm thin high-quality CNC-machined graphite chassis for XRAY T1FK'05 as used by all team drivers in low-grip racing conditions.  



Upper Deck T1FK 05 - CNC Machined - Wide
#301165

High-quality CNC-machined graphite upper deck for XRAY T1FK’05 is wider than standard #301164 upper deck for increased chassis stiffness; recommended for high-grip conditions especially foam/carpet racing.  



Adjustable Upper Deck T1FK 05 - 2.5mm Graphite
#301175

XRAY introduces another late-breaking innovation for the new T1FK'05, confirming once again that XRAY is the leader in innovative development and leading-edge engineering.

After long term tests by factory team drivers, XRAY presents the world's first adjustable upper deck, CNC-machined from premium 2.5mm graphite. 



Alu Upper Deck Brace (2)
#301176

CNC-machined lightweight alu braces for altering the stiffness of the upper decks of both the XRAY T2 (uses 2 braces) and T1FK'05 (uses 3 braces). Placed in strategic positions on the top decks, these braces alter upper deck stiffness to fine-tune the car to the track. Set of 2. 



Impact Absorbing Front Bumper
#301201

Impact Absorbing Front Bumper for T1. The bumper is made from high quality nylon that absorbs the energy from crashes.
 



Foam Bumper - Blue
#301225

High quality foam bumper, blue color, made from specially developed foam material. Very light yet very strong. Protects front of car in serious collisions.  

Replaced by Foam Bumper 



Lower 0.75mm Eccentric Suspension Holder (2+2)
#302041

Set of molded composite lower suspension pin holders. The suspension holders have a 0.75mm eccentric hole that lowers the rear roll center. Using the eccentric rear suspension holders will create more rear grip and at the same time increase steering.  



Shock Tower Front for Foam Tires - Graphite
#302095

CNC-machined front shock tower made from highest-quality 2.5mm woven graphite. This shock tower is lower than the original, and is designed for use with the optional C-hub suspension and smaller diameter tires with foams. 



Short Suspension Arm - Front Lower - C-Hub - Hard
#302160

Molded short front lower suspension arm for C-hub suspension. Hard rigidity. May be used on either left or right side. Engraved with "H" for easy identification.  



Composite Steering Block Right – 3 Holes
#302251

Right C-hub steering block made from tough molded composite. Includes 3 holes for choice of Ackermann setting. 



Alu Steering Block Right For C-Hub Susp.
#302255

Alu Steering Block Right for C-Hub Suspension CNC-machined highest-quality duraluminum front right steering block for C-hub suspension. Includes two nylon bushings for ball-bearings. 



Composite Steering Block Left – 3 Holes
#302261

Left C-hub steering block made from tough molded composite. Includes 3 holes for choice of Ackermann setting.
 



Alu Steering Block Left For C-Hub Susp.
#302265

Alu Steering Block Left for C-Hub Suspension CNC-machined highest-quality duraluminum front left steering block for C-hub suspension. Includes two nylon bushings for ball-bearings. 



Alu C-Hub for Steering Block Right - Caster 1.5°
#302272

CNC-machined highest-quality duraluminum C-hub for right steering block. Caster pre-set at 1.5 degrees. Engraved with "R1.5" for easy identification.  



Alu C-Hub for Steering Block Left - Caster 1.5°
#302273

CNC-machined highest-quality duraluminum C-hub for left steering block. Caster pre-set at 1.5 degrees. Engraved with "L1.5" for easy identification.  



Alu C-Hub For Steering Block - Caster 0°
#302275

CNC-machined highest-quality duraluminum C-hub with caster pre-set at 0 degrees for maximum off-power steering. Can be used for either left or right steering blocks; use only a matched pair of 0deg C-hubs together. 



Alu C-Hub For Steering Block Right - Caster 3°
#302276

CNC-machined highest-quality duraluminum C-hub for right steering block. Caster pre-set at 3 degrees for more on-power steering. Engraved with "R3" to easy identification. 



Alu C-Hub For Steering Block Left - Caster 3°
#302277

CNC-machined highest-quality duraluminum C-hub for left steering block. Caster pre-set at 3 degrees for more on-power steering. Engraved with "L3" to easy identification. 



Alu C-Hub For Steering Block Right - Caster 6°
#302278

CNC-machined highest-quality duraluminum C-hub for right steering block. Caster pre-set at 6 degrees for maximum on-power steering. Engraved with "R6" to easy identification.  



Alu C-Hub For Steering Block Left - Caster 6°
#302279

CNC-machined highest-quality duraluminum C-hub for left steering block. Caster pre-set at 6 egrees for maximum on-power steering. Engraved with "L6" to easy identification.  



Composite C-Hub Front Block, Right - Soft - 3°
#302281

Molded C-hub for right steering block. Caster pre-set at 3° for neutral handling. Engraved with "R3" to easy identification. Soft rigidity. Use with left-side composite 3° C-hub (soft) #302283. 



Composite C-Hub Front Block, Left - Soft - 3°
#302283

Molded C-hub for left steering block. Caster pre-set at 3° for neutral handling. Engraved with "L3" to easy identification. Soft rigidity. Use with right-side composite 3° C-hub (soft) #302281. 



Composite C-Hub Front Block, Right - Soft - 6°
#302285

Molded C-hub for right steering block. Caster pre-set at 6° for maximum on-power steering. Engraved with "R6" to easy identification. Soft rigidity. Use with left-side composite 6° C-hub (soft) #302287. 



Composite C-Hub Front Block, Right - Medium - 6°
#302286

Molded C-hub for right steering block. Caster pre-set at 6° for maximum on-power steering. Engraved with "R6" to easy identification. Medium rigidity. Use with left-side composite 6° C-hub (medium) #302288. 

Replaced by Composite C-Hub Front Block, Right - Hard - 6° 



Composite C-Hub Front Block, Left - Soft - 6°
#302287

Molded C-hub for left steering block. Caster pre-set at 6° for maximum on-power steering. Engraved with "L6" to easy identification. Soft rigidity. Use with right-side composite 6° C-hub (soft) #302285. 



Composite C-Hub Front Block, Left - Medium - 6°
#302288

Molded C-hub for left steering block. Caster pre-set at 6° for maximum on-power steering. Engraved with "L6" to easy identification. Medium rigidity. Use with right-side composite 6° C-hub (medium) #302286. 



Composite C-Hub Front Block, Right - Hard - 3°
#302325

Molded C-hub for right steering block. Caster pre-set at 3° for neutral handling. Engraved with "R3" to easy identification. Hard rigidity. Use with left-side composite 3° C-hub (hard) #302326. 



Composite C-Hub Front Block, Left - Hard - 3°
#302326

Molded C-hub for left steering block. Caster pre-set at 3° for neutral handling. Engraved with "L3" to easy identification. Hard rigidity. Use with right-side composite 3° C-hub (hard) #302325. 



Composite C-Hub Front Block, Right - Medium - 4.5°
#302327

Molded C-hub for right steering block. Caster pre-set at 4.5° for more on-power steering. Engraved with "R4.5" to easy identification. Medium rigidity. Use with left-side composite 4.5° C-hub (medium) #302328. 



Composite C-Hub Front Block, Left - Medium - 4.5°
#302328

Molded C-hub for left steering block. Caster pre-set at 4.5° for more on-power steering. Engraved with "L4.5" to easy identification. Medium rigidity. Use with right-side composite 4.5° C-hub (medium) #302327. 



Composite C-Hub Front Block, Right - Hard - 4.5°
#302329

Molded C-hub for right steering block. Caster pre-set at 4.5° for more on-power steering. Engraved with "R4.5" to easy identification. Hard rigidity. Use with left-side composite 4.5° C-hub (hard) #302330. 



Composite C-Hub Front Block, Left - Hard - 4.5°
#302330

Molded C-hub for left steering block. Caster pre-set at 4.5° for more on-power steering. Engraved with "L4.5" to easy identification. Hard rigidity. Use with right-side composite 4.5° C-hub (hard) #302329. 



Composite C-Hub Front Block, Right - Hard - 6°
#302331

Molded C-hub for right steering block. Caster pre-set at 6° for maximum on-power steering. Engraved with "R6" to easy identification. Hard rigidity. Use with left-side composite 6° C-hub (hard) #302332. 



Composite C-Hub Front Block, Left - Hard - 6°
#302332

Molded C-hub for left steering block. Caster pre-set at 6° for maximum on-power steering. Engraved with "L6" to easy identification. Hard rigidity. Use with right-side composite 6° C-hub (hard) #302331. 



Anti-Roll Bar Front 2mm (Set)
#302460

If your car is oversteering, then try this optional front anti-roll bar set. The front anti-roll bar will decrease front chassis roll and decrease front traction, reducing your car’s steering.
This complete front anti-roll bar set is designed for use with the composite front upper bumper holder (#301217) which has molded-in mounts. The kit includes a 2.0mm anti-roll bar. 



Anti-Roll Bar Front 1 mm
#302471

Optional front anti-roll bar (1.0mm thick) has 2 ground surfaces. This provides stiffness adjustment of the front anti-roll bar. This is the SOFTEST front anti-roll bar for use with the
#302460 Front Anti-Roll Bar Set. 



Anti-Roll Bar Front 1.5 mm
#302472

Optional front anti-roll bar (1.5mm thick) has 1 ground surface. This provides stiffness adjustment of the front anti-roll bar. This is the MEDIUM front anti-roll bar for use with the
#302460 Front Anti-Roll Bar Set. 



Graphite Motor Guard
#303060

CNC-machined graphite motor guard for T1FK’05 and T2 protects the motor endbell from collisions. Includes mounting hardware.  



Set of Alu Shims (1.0mm, 2.0mm, 3.0mm) – Silver
#303120

Ultimate assortment of set-up shims. You can use the shims for easy and accurate adjustment of:
- front and rear roll center
- front bump steer
- front and rear toe-in
- wheelbase  



Set of Alu Shims (1.0mm, 2.0mm, 3.0mm) – Blue
#303121

Ultimate assortment of set-up shims. You can use the shims for easy and accurate adjustment of:
• front and rear roll center
• front bump steer
• front and rear toe-in
• wheelbase  



Alu Shim 3x6x0.5mm - Black (10)
#303121-K

Alu shims 3x6mm size, 0.5mm thick. Black color. Set of 10. 



Alu Shim 3x6x0.5mm - Orange (10)
#303121-O

Alu shims 3x6mm size, 0.5mm thick. Orange color. Set of 10. 



Alu Shim 3x6x3.0mm (10)
#303125

Alu shims 3x6mm size, 3mm thick. Set of 10. 



Alu Shim 3x6x3.0mm - Black (10)
#303125-K

Alu shims 3x6mm size, 3mm thick. Black color. Set of 10. 



Alu Shim 3x6x3.0mm - Orange (10)
#303125-O

Alu shims 3x6mm size, 3mm thick. Orange color. Set of 10. 



Alu Shim 3x6x5.0mm - Black (10)
#303126-K

Alu shims 3x6mm size, 5mm thick. Black color, set of 10. 



Short Suspension Arm - Rear Lower - C-Hub - Hard
#303160

Molded rear short lower suspension arm for C-hub suspension. Hard rigidity. May be used on either left or right side. Engraved with "H" for easy identification. 



Alu Upright Rear For C-Hub Suspension
#303355

CNC-machined rear upright for C-hub suspension is made from highest-quality duraluminum. Can be used on either left or right side. Includes two nylon bushings for ball-bearings. 



Alu Upright Rear 1° Outboard Toe-In (L+R)
#303356

CNC-machined rear upright made from highest-quality duraluminum features an integrated 1° outboard toe-in. Use the outboard toe-in will increase the corner speed. Complete set of left and right blocks. Includes composite bushings for ball-bearings. 



Alu Upright Rear 2° Outboard Toe-In (L+R)
#303357

CNC-machined rear upright made from highest-quality duraluminum features an integrated 2° outboard toe-in. Use the outboard toe-in will increase the corner speed. Complete set of left and right blocks. Includes composite bushings for ball-bearings. 



Anti-Roll Bar Rear 2mm (Set)
#303400

If your car is understeering, then try this optional rear anti-roll bar. The rear anti-roll bar will decrease rear chassis roll and decrease rear traction. This will give your car more steering. 



Anti-roll Bar Rear 1mm
#303421

Optional rear anti-roll bar (1.0mm thick) has 2 ground surfaces. This provides stiffness adjustment possibilities of the rear anti-roll bar. This is the SOFTEST rear anti-roll bar.  



Anti-roll Bar Rear 1.5mm
#303422

Optional rear anti-roll bar (1.5mm thick) has 1 ground surface. This provides stiffness adjustment of the rear anti-roll bar. This is the MEDIUM rear anti-roll bar.  



Ball Differential - Spring Steel - Set
#305001

XRAY is proud to present the smoothest, highest-quality differential in the RC industry! Manufactured exclusively for XRAY by HUDY, made from world-renowned top-secret Hudy Spring Steel, this high-performance differential set features an exclusive double slotted design, carbide diff balls, new axial ball-bearing with larger balls for smoother operation and ultra-high durability. Impossible to wear out!  



XRAY Multi-Diff T1FK 05, T2, T2R, T2 007
#305102

New, innovation and new patent – the XRAY Multi-Diff™. This new unique front diff has three different settings: one-way / one-way solid / full-time solid axle.  



Multi-Diff Main Axle T1FK 05, T2, T2R, T2 007
#305112

CNC-machined main axle for Multi-Diff™ for XRAY T1FK’05, T2, T2R and T2'007.
This axle does NOT fit the Multi-Diff™ for XRAY T1, T1Evo2, T1R, T1M, or T1FK. 



Multi-Diff Locking Axle - Spring Steel
#305121

Multi-Diff™ locking axle is CNC-machined from Hudy Spring Steel™. Fits both #305102 and #305103 Multi-Diffs™ for all XRAY T1 cars. Must only be used with #305131 Inner Driveshaft Adapters. 



Inner Driveshaft Adapter - Spring Steel (2)
#305131

Precision-machined, specially-lightened outdrives for use with all XRAY T1 front one-way axles (including Multi-Diff™). The new lightweight one-way out drives manufactured from Hudy Spring Steel have a hex hole machined at each end.  

Replaced by Inner Driveshaft Adapter 3.5mm - Spring Steel (2) 



Delrin® Solid Axle Complete Set
#305181

Delrin® Solid Axle Complete Set is for serious racers looking for an edge. XRAY's new ultra-true, high-durability solid front axle body is CNC machined from lightweight Delrin® composite material, making it 25% lighter than the original Multi-Diff. This solid axle complete set is a full-time solid axle only; all parts are included. Fits all XRAY touring cars.

Used by XRAY Factory Team - a "must have" for serious racers. 



Delrin® Solid Axle Body - Lightweight
#305186

For serious racers looking for an edge, XRAY's new ultra-true, high-durability solid front axle body is CNC machined from lightweight Delrin® composite material, making it 25% lighter than the original Multi-Diff. This solid axle transforms the XRAY Multi-Diff into a full-time solid axle only; remaining parts must be used from the Multi-Diff. Fits all XRAY touring cars.

Used by XRAY Factory Team - a "must have" for serious racers. 



Wheel Axle – 22mm - Offset ‶-1mm※ - Hard Coated (2)
#305312

CNC-machined hardcoated duraluminum rear wheel axles with hex hubs. Ultra-true, direct, wobble-free wheel mounting ensures ‶slop-free" wheel rotation. Wheel axles have been strategically lightened to reduce rotating mass without compromising strength.
The wheel axles feature a -1mm offset which means that they are 1mm shorter than standard wheel axles.  



Wheel Axle – 22mm - Offset ‶+1mm※ - Hard Coated (2)
#305313

CNC-machined hardcoated duraluminum rear wheel axles with hex hubs. Ultra-true, direct, wobble-free wheel mounting ensures ‶slop-free" wheel rotation. Wheel axles have been strategically lightened to reduce rotating mass without compromising strength.
The wheel axles feature a +1mm offset which means that they are 1mm longer than standard wheel axles.  



Wheel Axle - 22 mm - Integr. Hex Hub - Spring Steel (2)
#305315

Optional wheel axles manufactured for XRAY by HUDY from the world-famous top-secret "Hudy Spring Steel(TM)". These are a direct replacement for the original duraluminum wheelaxles, and will be virtually impossible to damage or wear out. The wheelaxles are strategically CNC-machined so they are as light as possible to reduce rotating mass, while maintaining ultimate strength.  



Composite Offset Spur Gear 72T / 48
#305772

XRAY precision-molded offset spur gear 72T 48P, strategically lightened to reduce rotating mass. 



Composite Offset Spur Gear 76T / 48
#305776

XRAY precision-molded offset spur gear 76T 48P, strategically lightened to reduce rotating mass. 



Composite Offset Spur Gear 79T / 48
#305779

XRAY precision-molded offset spur gear 79T 48P, strategically lightened to reduce rotating mass. 



Composite Offset Spur Gear 90T / 64
#305860

XRAY precision molded offset spur gear 90 tooth, 64 pitch 



Composite Offset Spur Gear 92T / 64
#305862

XRAY presents new additions to the range of precision-molded 64-pitch offset spur gears made from special hard composite material, strategically lightened to reduce rotating mass without compromising strength or durability. 



Composite Offset Spur Gear 96T / 64
#305866

XRAY presents new additions to the range of precision-molded 64-pitch offset spur gears made from special hard composite material, strategically lightened to reduce rotating mass without compromising strength or durability. 



Composite Offset Spur Gear 99T / 64
#305869

Addition to the range of precision-molded 64-pitch offset spur gears made from special hard composite material, strategically lightened to reduce rotating mass without compromising strength or durability. 



Composite Offset Spur Gear 100T / 64
#305870

XRAY presents new additions to the range of precision-molded 64-pitch offset spur gears made from special hard composite material, strategically lightened to reduce rotating mass without compromising strength or durability. 



Alu Narrow Pinion Gear - Hard Coated 39T / 64
#305989

These narrow pinions are manufactured by XRAY on a specially-modified precision gear machine for ultra-precise tolerances and unparalleled concentricity.  



Narrow Pinion Gear Alu Hard Coated 40T/64
#305990

These narrow pinions are manufactured by XRAY on a specially-modified precision gear machine which has ultra-precise tolerances and assures unparalleled concentricity. After machining, the edges of pinions are chamfered and then the pinions are run in. The pinions are then specially treated to give them an even hardcoating so they stay absolutely true for a long time.  



Narrow Pinion Gear Alu Hard Coated 42T/64
#305992

These narrow pinions are manufactured by XRAY on a specially-modified precision gear machine which has ultra-precise tolerances and assures unparalleled concentricity. After machining, the edges of pinions are chamfered and then the pinions are run in. The pinions are then specially treated to give them an even hardcoating so they stay absolutely true for a long time.  



Alu Narrow Pinion Gear - Hard Coated 43T / 64
#305993

These narrow pinions are manufactured by XRAY on a specially-modified precision gear machine for ultra-precise tolerances and unparalleled concentricity.  



Narrow Pinion Gear Alu Hard Coated 44T/64
#305994

These narrow pinions are manufactured by XRAY on a specially-modified precision gear machine which has ultra-precise tolerances and assures unparalleled concentricity. After machining, the edges of pinions are chamfered and then the pinions are run in. The pinions are then specially treated to give them an even hardcoating so they stay absolutely true for a long time.  



Narrow Pinion Gear Alu Hard Coated 46T/64
#305996

These narrow pinions are manufactured by XRAY on a specially-modified precision gear machine which has ultra-precise tolerances and assures unparalleled concentricity. After machining, the edges of pinions are chamfered and then the pinions are run in. The pinions are then specially treated to give them an even hardcoating so they stay absolutely true for a long time. v 



Alu Narrow Pinion Gear - Hard Coated 47T / 64
#305997

These narrow pinions are manufactured by XRAY on a specially-modified precision gear machine for ultra-precise tolerances and unparalleled concentricity.  



Narrow Pinion Gear Alu Hard Coated 48T/64
#305998

These narrow pinions are manufactured by XRAY on a specially-modified precision gear machine which has ultra-precise tolerances and assures unparalleled concentricity. After machining, the edges of pinions are chamfered and then the pinions are run in. The pinions are then specially treated to give them an even hardcoating so they stay absolutely true for a long time.  



Narrow Pinion Gear Alu Hard Coated 50T/64
#306000

These narrow pinions are manufactured by XRAY on a specially-modified precision gear machine which has ultra-precise tolerances and assures unparalleled concentricity. After machining, the edges of pinions are chamfered and then the pinions are run in. The pinions are then specially treated to give them an even hardcoating so they stay absolutely true for a long time.  



6-Cell Graphite Battery Strap w/ Alu Stands (Set)
#306163

Pre-assembled 6-cell graphite battery strap for XRAY T2, T3 features the XRAY smart battery holder system and new battery tweak-free mounting system. The alu capture wheel enables you to easily close and secure the battery strap without any clips.  



Alu Top Deck Mount (2)
#306510

CNC-machined alu top deck mounting posts for XRAY T1FK’05. Set of two. Recommended for use with #301165 Wide Top Deck in the rear. 



Titanium Rear Arm Pivot Pin (2)
#307322

Titanium rear lower outer pivot pins, ultra-precision hand ground for high durability and long life.  



Pivot Ball 4.9mm Double Bevel Shoulders (10)
#307453

Specially-machined 4.9mm pivot ball with double bevel shoulders. Set of 10 pieces. 



Alu Shock Spring Retaining Collar (4)
#308031

Aluminum CNC-machined shock collars that can be used on the XRAY shock absorbers to increase the durability. Stylish and lightweight collars are CNC-machined from premium Swiss 7075 T6 aluminum and are strategically lightened. 



Alu XRAY Shock Spring Retaining Collar - Black (4)
#308031-K

Aluminum shock collars for use on XRAY shock absorbers to increase durability.  



Alu XRAY Shock Spring Retaining Collar - Orange (4)
#308031-O

Aluminum CNC-machined shock collars that can be used on the XRAY shock absorbers to increase the durability. Stylish and lightweight collars are CNC-machined from premium Swiss 7075 T6 aluminum and are strategically lightened. Set of four. Orange color. 



Shock Absorber Membranes - Low
#308081

Silicon-rubber compensation membranes for shock absorbers. All-new low-profile shock membranes allow for easier shock rebound adjustment. 



Shock Foam Inserts (4)
#308090

Foam inserts for XRAY shocks, go between shock upper mount and rubber membrane. Set of 4 pieces. 



Shock Foam Insert - Low (4)
#308091

Foam inserts for XRAY shocks, go between shock upper mount and rubber membrane. All-new low-profile shock foam inserts allow for easier shock rebound adjustment. 



Composite Shock Parts - Rebound Hole - Short
#308332

One frame containing composite parts (except pistons) for two XRAY short shock absorbers. These new shock parts feature the upper shock cap with a hole which allows for faster, easier and more comfortable shocks rebound adjustment. Fits all XRAY electric and nitro touring shocks. 



XRAY Spring-Set C = 2.2 (2)
#308373

New ultimate-match shock springs (C = 2.2) for XRAY T2 shocks. Stylish black finish. Laser-engraved value (2.2) on top spring coil for easy identification. Set of 2. 



XRAY Spring-Set C = 2.4 (2)
#308374

New ultimate-match shock springs (C = 2.4) for XRAY T2 shocks. Stylish black finish. Laser-engraved value (2.4) on top spring coil for easy identification. Set of 2. 



XRAY Spring-Set C = 2.6 (2)
#308375

New ultimate-match shock springs (C = 2.6) for XRAY T2 shocks. Stylish black finish. Laser-engraved value (2.6) on top spring coil for easy identification. Set of 2. 



XRAY Spring-Set C = 2.8 (2)
#308376

New ultimate-match shock springs (C = 2.8) for XRAY T2 shocks. Stylish black finish. Laser-engraved value (2.8) on top spring coil for easy identification. Set of 2. 



XRAY Spring-Set C = 3.0 (2)
#308377

New ultimate-match shock springs (C = 3.0) for XRAY T2 shocks. Stylish black finish. Laser-engraved value (3.0) on top spring coil for easy identification. Set of 2. 



XRAY Spring-Set C = 3.2 (2)
#308378

New ultimate-match shock springs (C = 3.2) for XRAY T2 shocks. Stylish black finish. Laser-engraved value (3.2) on top spring coil for easy identification. Set of 2. 



XRAY Spring-Set C = 3.4 (2)
#308379

New ultimate-match shock springs (C = 3.4) for XRAY T2 shocks. Stylish black finish. Laser-engraved value (3.4) on top spring coil for easy identification. Set of 2. 



Additional XRAY Ultimate Racing Springs (20)
#308380

For even more fine tuning of suspension dampening, XRAY offers an additional set of ultra-fine tuning springs in addition to the basic set (#308390) of XRAY springs. The ultra-fine tuning springs have different damping and compression characteristics that fall between the range of the springs in the basic set.  



XRAY Spring-Set D=1.4 (14 LB) Gold (4)
#308382

Ultimate high-performance racing springs give you additional precision tuning options for your XRAY model racing car! Developed through extensive testing and racing experience, these racing springs were designed and precision-crafted to have a more progressive rate than standard XRAY racing springs. The new progressive XRAY spring sets were designed to give you an additional range of choices to fine tune your car.  



XRAY Spring-Set D=1.5 (17.5 LB) Silver (4)
#308383

Ultimate high-performance racing springs give you additional precision tuning options for your XRAY model racing car! Developed through extensive testing and racing experience, these racing springs were designed and precision-crafted to have a more progressive rate than standard XRAY racing springs. The new progressive XRAY spring sets were designed to give you an additional range of choices to fine tune your car.  



XRAY Spring-Set D=1.5 (15 LB) Blue-Green (4)
#308384

For even more fine tuning of suspension dampening, XRAY offers an additional ultra-fine tuning springs in addition to the basic XRAY springs. The ultra-fine tuning springs have different damping and compression characteristics that fall between the range of the basic springs. All 4 springs within the set have the same length and damping characteristics. 



XRAY Spring-Set D=1.6 (20 LB) Light-Blue (4)
#308385

For even more fine tuning of suspension dampening, XRAY offers an additional ultra-fine tuning springs in addition to the basic XRAY springs. The ultra-fine tuning springs have different damping and compression characteristics that fall between the range of the basic springs. All 4 springs within the set have the same length and damping characteristics. 



XRAY Spring-Set D=1.7 (25 LB) Dark-Blue (4)
#308386

For even more fine tuning of suspension dampening, XRAY offers an additional ultra-fine tuning springs in addition to the basic XRAY springs. The ultra-fine tuning springs have different damping and compression characteristics that fall between the range of the basic springs. All 4 springs within the set have the same length and damping characteristics. 



XRAY Spring-Set D=1.8 (30 LB) C=4.5 (4)
#308387

For even more fine tuning of suspension dampening, XRAY offers an additional ultra-fine tuning springs in addition to the basic XRAY springs. The ultra-fine tuning springs have different damping and compression characteristics that fall between the range of the basic springs. All 4 springs within the set have the same length and damping characteristics. 



XRAY Spring-Set D=1.9 (35 LB) Light-Red (4)
#308388

For even more fine tuning of suspension dampening, XRAY offers an additional ultra-fine tuning springs in addition to the basic XRAY springs. The ultra-fine tuning springs have different damping and compression characteristics that fall between the range of the basic springs. All 4 springs within the set have the same length and damping characteristics. 



XRAY Selected Ultimate Racing Springs (24)
#308390

Ultimate high-performance racing springs, which provide precision tuning for your XRAY model racing car! Developed from extensive testing and racing experience, these racing springs were designed and precision-crafted to have a unique spring characteristic. The XRAY spring sets were designed to give you an optimum range of choices to fine tune your car.  



XRAY Spring-Set D=1.4 (14 LB) Yellow - Super Soft (4)
#308393

Set of four coil-springs for XRAY shock absorbers. All 4 springs within the set have the same length and damping characteristics.

Colour: Yellow
Tension: Very Soft

NOT interchangeable with yellow springs for Serpent shocks - 308096 Spring-set D=1.6 Yellow (2+2)
 



XRAY Spring-Set D=1.5 (17.5 LB) White - Soft (4)
#308394

Set of four coil-springs for XRAY shock absorbers. All 4 springs within the set have the same length and damping characteristics.

Colour: White
Tension: Soft

NOT interchangeable with yellow springs for Serpent shocks - 308095 Spring-set D=1.5 White (2+2)
 



XRAY Spring-Set D=1.6 (22.5 LB) Blue - Soft-Medium (4)
#308395

Set of four coil-springs for XRAY shock absorbers. All 4 springs within the set have the same length and damping characteristics.

Colour: Blue
Tension: Soft-Medium
 



XRAY Spring-Set D=1.7 (28 LB) Violet - Medium (4)
#308396

Set of four coil-springs for XRAY shock absorbers. All 4 springs within the set have the same length and damping characteristics.

Colour: Violet
Tension: Medium
 



XRAY Spring-Set D=1.8 (33 LB) Purple - Medium-Hard (4)
#308397

Set of four coil-springs for XRAY shock absorbers. All 4 springs within the set have the same length and damping characteristics.

Colour: Purple
Tension: Medium-Hard

NOT interchangeable with purple springs for Serpent shocks - 308093 Spring-set D=1.3 Purple (2+2)
 

Replaced by Spring-Set C=5.0 - Rear (2) 



XRAY Spring-Set D=1.9 (38 LB) Red - Hard (4)
#308398

Set of four coil-springs for XRAY shock absorbers. All 4 springs within the set have the same length and damping characteristics.

Colour: Red
Tension: Hard
 



Tires XXT-M W/O Belt for Low Grip Asphalt (2)
#309612

Rubber tires specially developed for low-grip asphalt. Fits most popular sizes of wheels and inserts. Set of 2.  



Tires XXT-M for Asphalt (2)
#309617

Rubber tires specially developed for medium & high-grip asphalt. Fits most popular sizes of wheels and inserts. Set of 2. 



Body Alfa 156 Ver. 2.0 + Accessories (Protoform)
#309710

Alfa 156 (ver 2.0) body made from high-strength Lexan® fits 1:10th scale electric touring cars such as the XRAY T4. Includes window mask, add-on wing, and mounting hardware. 



Body Stratus 2.0 + Accessories (Protoform)
#309720

Stratus (ver 2.0) body made from high-strength Lexan® fits 1:10th scale electric touring cars such as the XRAY T4. Includes window mask, add-on wing, and mounting hardware. 



Balancing Chassis Weights (Front - 2pcs.)
#309820

Precision chassis weights
A complete set of 2 chassis balancing weights and mounting hardware. Designed for XRAY T1 to be mount at the pre-drilled holes at the front of the chassis but fits any other race car as well. Made from brass. 

Replaced by Precision Balancing Chassis Weights (4 pcs.) 



Balancing Chassis Weights (Rear - 6 pcs.)
#309830

Precision chassis weights
A complete set of 6 chassis balancing weights and mounting hardware. Designed for XRAY T1 to be mount at the pre-drilled holes at the rear of the chassis but fits any other race car as well. Made from brass. 

Replaced by Precision Balancing Chassis Weights (4 pcs.) 



Balancing Chassis Weights (Center - 3 pcs)
#309850

Precision chassis weights
A complete set of 3 chassis balancing weights and mounting hardware. Designed for XRAY T1 to be mount at the pre-drilled holes at the center of the chassis but fits any other race car as well. Made from brass.  

Replaced by Precision Balancing Chassis Weights (4 pcs.) 



XRAY Aluminum 1/10 Touring Set-Up Board - Limited Edition
#309901

Unique flat set-up board for 1/10 electric & nitro touring cars with stylish, full-colour XRAY graphics screen printed with your name and country flag.  



Spring-Set C=3.6 - Soft-Medium Hard - Rear (2)
#338286

XRAY rear spring set for NT1. Different spring tensions to fine tune your car. Powder-coated for easy identification. Developed from extensive testing and racing experience, these racing shock springs were designed and precision-crafted to have a unique spring characteristic. Set of 2 springs. 



Spring-Set C=4.5 - Medium-Medium Hard - Rear (2)
#338287

XRAY rear spring set for NT1. Different spring tensions to fine tune your car. Powder-coated for easy identification. Developed from extensive testing and racing experience, these racing shock springs were designed and precision-crafted to have a unique spring characteristic. Set of 2 springs. 



XRAY Springs - Set D=1.9 (35 LB) Light Red - Hard - Rear (2)
#338288

XRAY rear spring set for NT1. Different spring tensions to fine tune your car. Powder-coated for easy identification. Developed from extensive testing and racing experience, these racing shock springs were designed and precision-crafted to have a unique spring characteristic. Set of 2 springs. 



XRAY Springs - Set C=4.0 - Medium - Rear (2)
#338296

XRAY rear spring set for NT1. Different spring tensions to fine tune your car. Powder-coated for easy identification. Developed from extensive testing and racing experience, these racing shock springs were designed and precision-crafted to have a unique spring characteristic. Set of 2 springs. 



XRAY Springs - Set C=5.0 - Medium-Hard - Rear (2)
#338297

XRAY rear spring set for NT1. Different spring tensions to fine tune your car. Powder-coated for easy identification. Developed from extensive testing and racing experience, these racing shock springs were designed and precision-crafted to have a unique spring characteristic. Set of 2 springs. 



Ceramic Ball 2.4mm (12)
#930220

Set of 12 premium-quality ceramic balls made from extra-hard Si3N4 silicone nitride ceramic. Significantly improves differential lifespan while reducing friction and vibration. Higher RPM capabilities. 



Ball-Bearing 10x15x4 Rubber Sealed - Grease (2)
#941014

High-speed ball-bearings manufactured specially for XRAY. ID x OD x thickness (mm) = 10x15x4.  



ID Product Name Released
303125-O Alu Shim 3x6x3.0mm - Orange (10) Sep. 10, 2018
941014 Ball-Bearing 10x15x4 Rubber Sealed - Grease (2) Mar. 21, 2018
305869 Composite Offset Spur Gear 99T / 64 Nov. 14, 2017
305772 Composite Offset Spur Gear 72T / 48 Apr. 11, 2017
305776 Composite Offset Spur Gear 76T / 48 Apr. 11, 2017
305779 Composite Offset Spur Gear 79T / 48 Apr. 11, 2017
303126-K Alu Shim 3x6x5.0mm - Black (10) Mar. 24, 2017
305860 Composite Offset Spur Gear 90T / 64 Jan. 03, 2017
305989 Alu Narrow Pinion Gear - Hard Coated 39T / 64 Oct. 21, 2016
305993 Alu Narrow Pinion Gear - Hard Coated 43T / 64 Oct. 21, 2016
305997 Alu Narrow Pinion Gear - Hard Coated 47T / 64 Oct. 20, 2016
308031-K Alu XRAY Shock Spring Retaining Collar - Black (4) Apr. 06, 2016
307322 Titanium Rear Arm Pivot Pin (2) Jan. 15, 2015
303125 Alu Shim 3x6x3.0mm (10) Oct. 24, 2014
303125-K Alu Shim 3x6x3.0mm - Black (10) Oct. 24, 2014
309710 Body Alfa 156 Ver. 2.0 + Accessories (Protoform) Sep. 04, 2014
309720 Body Stratus 2.0 + Accessories (Protoform) Sep. 04, 2014
309612 Tires XXT-M W/O Belt for Low Grip Asphalt (2) Dec. 06, 2013
309617 Tires XXT-M for Asphalt (2) Dec. 06, 2013
303121-K Alu Shim 3x6x0.5mm - Black (10) Mar. 26, 2013