CNC-machined alu heat sink for Super Size motor, blue color. Clips onto motor easily and provides extra cooling. Fits Super Size 300 and 370 motors, Team Orion Big Block motor, and Team Orion Baja modified motor. 

Will fit front and rear shock towers M18T to put the micro monster body on XRAY M18T. Micro body clips 4pcs included. 

CNC-machined front shock tower for XRAY M18T Micro Truck is made from highest-grade 4mm-thick 7075 T6 Swiss aluminum. XRAY stylish black finish with trademark silver edging. 

CNC-machined suspension block made from highest-grade Swiss aluminum fits XRAY M18 and M18T. Front left steering block also fits rear right on M18 and on M18T fits front right and rear right. All hardware is included. 

CNC-machined suspension block made from highest-grade Swiss aluminum fits XRAY M18 and M18T. Front right steering block also fits rear left on M18 and on M18T fits front left and rear left. All hardware is included. 

Front and rear anti-roll bars, 1.2mm dia, with matching pivot balls. 

CNC-machined rear shock tower for XRAY M18T Micro Truck is made from highest-grade 4mm-thick 7075 T6 Swiss aluminum. XRAY stylish black finish with trademark silver edging. 

Alu adjustable ball differential for M18 allows you to fine-tune the handling characteristics of this already great-handling micro racecar.  

CNC-machined alu drive shafts replace stock composite units. Smooth operation and extra strength for use with high-performance motors. This set of two drive shafts comes completely assembled, ready to install in the car. A ‶must have※ for serious drivers involved in high-competition racing. 

Conversion set to mount foam sedan (1/10 touring car) wheels on M18T. Includes CNC-machined 12mm hex axles and securing screws. 

Spur gear set includes machined steel 65T 48P spur gear, molded composite adaptor, and mounting hardware. Included as standard NT18MT. 

CNC-machined graphite battery brace (blue) for securing 5-cell or 6-cell pack in XRAY M18. Fits on the stock M18 chassis and the optional graphite chassis. 

CNC-machined graphite battery brace (silver) for securing 5-cell or 6-cell pack in XRAY M18. Fits on the stock M18 chassis and the optional graphite chassis. 

Molded composite servo mounting shims. Qty of 2. 

Spring set for M18MT includes 4 front springs (short) and 4 rear springs (long). 

Spring set for M18T includes 2 front springs (short) and 2 rear springs (long). 

Alu body oil-filled front shock absorbers for XRAY M18T provide ultra-smooth operation. Set of 2. Set of 2 front shocks come pre-assembled from factory without oil and springs. A "must have" for serious racers. 

Alu body oil-filled rear shock absorbers for XRAY M18T provide ultra-smooth operation. Set of 2 rear shocks come pre-assembled from factory without oil and springs. A "must have" for serious racers. 

The XRAY M18T Power Pack Pro includes high-performance electronics specially designed for the XRAY M18 and M18T. Includes XRAY XMC300R ESC with forward/brake/reverse, XRAY XMS01MG high-quality micro servo with metal gears and XRAY 300 Super Size motor with integrated capacitor board. 

XRAY introduces a new 5-cell (6.0V) inline battery pack made from ultra-high performance Intellect IB1400mAh NiMH cells. These 2/3A cells offer low resistance and they will maintain their high voltage under load, allowing them to easily provide power to high-powered servos without a performance decrease.  

XRAY introduces a new 6-cell (7.2V) inline battery pack made from ultra-high performance Intellect IB1400mAh NiMH cells. These 2/3A cells offer low resistance and they will maintain their high voltage under load, allowing them to easily provide power to high-powered servos without a performance decrease. 

Cable with universal micro plug for charging XRAY Micro Battery Packs. 

Micro cables with "fast on" connectors replaces the connectors on older 300 micro motors. Designed to work with the #389182 XMC300R ESC. Set of two, colour-coded for easy identification. 

Battery cable with micro connector for micro battery pack. Pre-wired with high-quality silicon-insulated stranded wire, pre-tinned ends. 

New premium 370 Supersize Micro Motor give 30% better performance (more power, more punch) than original 300 Supersize Micro Motor. Factory pre-assembled with surface-mount capacitor circuit board (no capacitors to solder), special noise filter, and pre-installed wires.  

The XRAY XMS02MG micro servo with metal gears has been specially chosen for the M18 micro racecar because of its high precision, long life and high quality. 

The XMC300R electronic speed controller is bi-directional and is one of the world’s smallest ESCs and has been specially designed for the XRAY M18 and M18T. A high competition speed controller suggested for high competition – a ‶must have※ for serious racers.  

Premium-quality, high-density foam tires (25deg - white compound) mounted on strong, rigid 28mm-wide white dish rims. The foam tire is solidly bonded to the wheels and pre-trued to an optimal starting diameter.  

Premium-quality, high-density foam tires (37deg - magenta compound) mounted on strong, rigid 28mm-wide white dish rims. The foam tire is solidly bonded to the wheels and pre-trued to an optimal starting diameter.  

Premium-quality, high-density foam tires (42deg - purple compound) mounted on strong, rigid 28mm-wide white dish rims. The foam tire is solidly bonded to the wheels and pre-trued to an optimal starting diameter.  

Premium-quality, high-density foam tires (42/47deg - purple/orange dual compound) mounted on strong, rigid 28mm-wide white dish rims. The foam tire is solidly bonded to the wheels and pre-trued to an optimal starting diameter.  

Premium-quality, high-density foam tires (25deg - white compound) mounted on strong 34mm-wide XRAY Starburst wheels (made purposefully softer for extra grip). The foam tire is solidly bonded to the wheels and pre-trued to an optimal starting diameter. 

Premium-quality, high-density foam tires (37deg - magenta compound) mounted on strong 34mm-wide XRAY Starburst wheels (made purposefully softer for extra grip). The foam tire is solidly bonded to the wheels and pre-trued to an optimal starting diameter. 

Premium-quality, high-density foam tires (42eg - white compound) mounted on strong 34mm-wide XRAY Starburst wheels (made purposefully softer for extra grip). The foam tire is solidly bonded to the wheels and pre-trued to an optimal starting diameter. 

Premium-quality, high-density foam tires (42/47deg - purple/orange dual compound) mounted on strong 34mm-wide XRAY Starburst wheels (made purposefully softer for extra grip). The foam tire is solidly bonded to the wheels and pre-trued to an optimal starting diameter. 

Micro truck tires & foam inserts. Low-pin rubber tires, hard compound. Set of 4. 

Micro monster truck tires with Thrax mini-block pattern. Set of 4 tires and 4 inserts. 

Micro monster truck tires with Chevron block pattern. Set of 4 tires and 4 inserts. 

Micro monster truck tires with shallow, ‶skewed chevron※ block pattern and central/edge sipes. Set of 4 tires and 4 inserts. 

Molded Starburst Aerodisk micro wheels (orange) for M18T made from tough composite material. Set of four. 

Molded Starburst Aerodisk micro wheels (pink) for M18T made from tough composite material. Set of four. 

Molded Starburst Aerodisk micro wheels (yellow) for M18T made from tough composite material. Set of four. 

Molded Starburst micro wheels for M18MT made from tough composite material. Set of four. 

Molded Starburst micro wheels (orange) for M18MT made from tough composite material. Set of four. 

Molded Starburst micro wheels (pink) for M18MT made from tough composite material. Set of four. 

Molded Starburst micro wheels (yellow) for M18MT made from tough composite material. Set of four. 

Carbide balls 2.4mm for ball differential. Improved, smoother diff operation over standard steel diff balls.  

High-precision axial thrustbearing for 385001 Alu. Adjustable Ball Differential for the XRAY M18. Carbide diff balls, and highest-quality materials and design guarantee the smoothest differential operation and increased life. 

Set of 12 premium-quality ceramic balls made from extra-hard Si3N4 silicone nitride ceramic. Significantly improves differential lifespan while reducing friction and vibration. Higher RPM capabilities. 

New high-speed ball-bearings manufactured specially for XRAY. ID x OD x thickness (mm) = 6x10x3. Set of 2 pieces.