xrayxrayHome XRAY homeXRAY X-shopXRAY X-forumRCAmerica
supportsearchcontactguestbooksite map
newsproductsaboutusworldwide headlines

 

XRAY presents new authentic option parts for XRAY XB8 car:

click to enlarge
(click to enlarge)


#355426 Front Universal Central Drive Shaft - Spring Steel™ - Set
#355626 Rear Universal Central Drive Shaft - Spring Steel™ - Set

• Free movement
• Increases traction
• Lightweight
• Individually measured & inspected

click to enlarge
(click to enlarge)


Optional front & rear universal central drive shaft, CNC-machined from world-renowned HUDY Spring Steel™. Ensures more free movement of the drivetrain and improves traction.

Strategically-machined, lightweight drive shaft has been weight-reduced without compromising strength. Individually measured and inspected. The most unique no-compromise off-road drive shafts.

Fit: XB8'16, XB8E'16 and XB8'17.



click to enlarge
(click to enlarge)


#352242 XB8'16 Composite Steering Block - Trailing Axle - Right
#352243 XB8'16 Composite Steering Block - Trailing Axle - Left

• Trailing axle
• Easy to drive
• Increases forward traction
• Improves handling
• For all track conditions

click to enlarge
(click to enlarge)


Optional steering blocks with trailing axle make the car easier to drive with increased forward traction. A significant improvement in handling of the car in all track conditions.

Fit: XB8'16, XB8E'16.



click to enlarge
(click to enlarge)


#358316 XRAY Front Spring 69mm - 4 Dots (2)
#358336 XRAY Rear Spring 85mm - 4-Dots (2)

• Better steering at corner entry
• For high-traction tracks
• Individually measured and controlled
• Individually inspected and matched
• Marked with 4 dots

click to enlarge
(click to enlarge)


New front and rear progressive springs are slightly progressive, but under more compression they change characteristics to become more linear. This gives an excellent feeling & feedback of the car in all different track conditions. Marked with FOUR dots for easy identification. Set of 2.

Available as a pair, the springs are individually measured, controlled, inspected and matched to provide identical damping characteristics. During the selection process, each spring is compressed in several fine increments and the values recorded, and then each spring is matched with another spring of identical characteristics. XRAY goes the extra mile to ensure perfect spring matches, giving your car the predictability and consistency that you need to help you lead the pack.

Fit: XB808, XB9 & XB8 cars.



click to enlarge
(click to enlarge)


#353280 XB8 Graphite Braces For Rear Composite Brace – Set

• Reinforcement
• Stiffening
• High traction tracks

click to enlarge
(click to enlarge)


Reinforcement brace for rear composite brace, stiffens the composite brace and chassis for high traction tracks.

Fits: XB8'16 and XB8E'16.



click to enlarge
(click to enlarge)


#353052 XB8 Graphite Rear Shock Tower

• Increases traction
• Extra strong
• Multiple shock positions
• Multiple roll-center positions
• Premium graphite material

click to enlarge
(click to enlarge)


Rear shock tower CNC-machined from thick 3.5mm premium-grade graphite for light weight and superior strength. Includes multiple shock positions and multiple roll center adjustment positions. Provides more traction, recommended for low-traction tracks.

Fits: XB8 & XB8E cars.



click to enlarge
(click to enlarge)


#352495 XB8 Front Anti-Roll Bar 2.5mm

• Premium heat-treated spring steel wire
• Laser engraved
• Easy identification

click to enlarge
(click to enlarge)


Front anti-roll bar for XB8, 2.5mm thick. Laser-engraved for easy identification.

Anti-roll bar wires of different thickness are optionally available for fine-tuning the set-up of your XB8.

Fits: XB8'14, XB8'15 & XB8E.



click to enlarge
(click to enlarge)


#352493 XB8 Front Anti-Roll Bar 2.3mm
#353425 Rear Anti-Roll Bar 2.5mm

• Premium heat-treated spring steel wire
• Laser engraved
• Easy identification

click to enlarge
(click to enlarge)


Front & rear anti-roll bars for XB8. Laser-engraved for easy identification.

Anti-roll bar wires of different thickness are optionally available to fine-tune the set-up of your XB8.

click to enlarge
(click to enlarge)



click to enlarge
(click to enlarge)


#352051 XB8 Graphite Front Shock Tower 4.0mm
#353051 XB8 Graphite Rear Shock Tower 4.0mm

• Increases traction
• Multiple shock positions
• Multiple roll center positions
• Premium graphite material

click to enlarge
(click to enlarge)


Extra-thick 4mm premium-grade graphite CNC-machined shock towers for light weight and strength. Include multiple shock positions and multiple roll center adjustment positions. Provide more traction and as such are recommended for low-traction tracks. (The standard alu shock towers provide more stability and are recommended for high-traction tracks.)

click to enlarge
(click to enlarge)


Fit: XB8'14, XB8'15 and XB8E.



click to enlarge
(click to enlarge)


#352653 Ball Stud 6.8mm with Backstop - M3

• Inner hex
• Inner thread
• For steering linkages
• Eliminates disconnecting
• Additionally heat treated
• Maximum strength
• Reliability
• Long life

click to enlarge
(click to enlarge)


New 6.8mm ball studs for steering linkages with backstop prevents the steering linkage from disconnecting in crashes. Additionally heat treated for maximum strength, reliability, and long life. Set of 2.

Fits: XB808 cars, XB9, XB9E, XB8E, XB8'14 and XB8'15.



click to enlarge
(click to enlarge)


#352193 XB8 Graphite Front Lower Arm Plate (2)
#353194 XB8 Graphite Rear Lower Arm Plate (2)

• SFA™ suspension flex adjustment
• Arm reinforcement
• Changes suspension hardness
• Increases stability
• Easier to drive
• For high-grip conditions
• Easy mount
• Premium high-grade graphite

click to enlarge
(click to enlarge)


All-new innovative and unique SFA™ graphite stiffeners allow for super-quick lower suspension flex adjustment to easily adjust the traction of the car under various track conditions.

Whether racing in low- or high-traction track conditions, you can easily adjust the flex of the front and rear lower arms by quickly and easily adding/removing optional graphite stiffeners to change the stiffness of the suspension. The graphite stiffeners give the car maximum stability in chicanes and allow for easier and smoother steering.

Made from 2.0mm high-quality CNC-machined graphite material, the stiffeners can be easily mounted or removed by only a few screws.

click to enlarge
(click to enlarge)


Fit: XB8'14, XB8'15 and XB8E.



click to enlarge
(click to enlarge)


#355106 XRAY XB8 Active Center Differential™ 46T

• Adjustable Active Center DifferentialTM
• Increases steering
• Improves speed & handling
• Fully adjustable
• Exchangeable internal segments & gears
• On- and off-power performance adjustment

click to enlarge
(click to enlarge)


The unique XRAY Center Active Differential™ is a high-performance, adjustable gear differential that vastly improves the buggy’s speed and handling characteristics. The special design of the internal components, using different angled segments, allows the diff gears to engage on-power to increase forward traction and stability to make the buggy faster and easier to drive.

click to enlarge
(click to enlarge)


While the XRAY Active Center Differential™ is a performance option for serious racers who want to gain an edge on superior speed and handling, it will also benefit any level of driver that wants a more predictable and easy-to-drive car in any racing conditions.

Fits: XB8'14, XB8'15 and XB8E.

click to enlarge
(click to enlarge)

click to enlarge
(click to enlarge)

click to enlarge
(click to enlarge)



click to enlarge
(click to enlarge)


#356196 XB8E Alu Chassis Stand Brace 8.6mm

• Optional alu stand
• Mounts graphite place to radio case
• Increases front stiffness

click to enlarge
(click to enlarge)


Optional alu stand for mounting the graphite plate to the radio case for increased front stiffness.

Fits: XB8E.



click to enlarge
(click to enlarge)


#358563 Graphite Clutch Shoe - Long Life (2)

• Special mixture
• Ultra-long life
• In combination with alu shoes
• Decreases wear of alu shoes

click to enlarge
(click to enlarge)


Graphite clutch shoe made from special graphite mixture material. Provides smoother engagement and significantly less wear of alu clutch shoe. Recommended for medium- and high-traction tracks. The special graphite mixture ensures extra-long life.
Use in combination with #358562 Alu Clutch Shoe - High Torque (3).



click to enlarge
(click to enlarge)


#355163 XB8 Active Diff. Outdrive Adapter - Lightweight - HSS™ (2)

• Super lightweight
• Extra-long lifespan
• Fits XB8 Active DiffTM
• Additionally ground
• Strategically lightened
• Precision hand-grinding
• Reduced rotating weight
• Maximum strength
• Super-high tolerance

click to enlarge
(click to enlarge)


XRAY offers lightweight CNC-machined diff outdrive adapters for XB8 Active Diff™. Made from world-renowned HUDY Spring Steel™ - the toughest steel material available - the outdrives have been strategically machined to be lighter than the standard #355160 Active Diff™ outdrive adapters. For serious racers who are conscious of weight savings.

CNC-machined on precision German long-turn machines. Additionally ground and strategically lightened to reduce rotating weight, then further hardened to ensure maximum strength and extra-long lifespan. Final precision hand-grinding ensures a very high tolerance to ensure an ultra-smooth tight fit in the diff body and diff gear.

Fits: XB8 and XB8E cars.



click to enlarge
(click to enlarge)


#358589 High-Torque Clutch Springs - Silver - Hard (3)

• Hard clutch springs
• Later engagement
• Silver color

click to enlarge
(click to enlarge)


Optional hard clutch springs for high-torque clutch, allow for later engagement. Silver color. Set of 3.

Fits: XB8, XB808, XB9, XT8 and XT9 cars.



click to enlarge
(click to enlarge)


#357253 Brass Adjusting Nut M15x1 (2)

• Brass material
• Additional weight
• Weight balance adjustment
• M15 size
• Set of 2
• 3x heavier than standard

click to enlarge
(click to enlarge)


Optional brass M15 adjusting nut for capturing pivot balls in front steering blocks. The additional weight nuts are more than 3x heavier than standard alu adjusting nut. Great and handy for weight balance adjustment. Set of 2.

Fits XB8.





click to enlarge
(click to enlarge)


#354112 Lightweight Ventilated Brake Disk - Laser Cut - Precision-Ground (2)

• Heat-treated and precision-ground
• Vibration-free operation
• Strategically-placed holes
• Ultra-cool operation prevents overheating
• Consistent and efficient braking performance
• Minimal brake pad wear and disk glazing

click to enlarge
(click to enlarge)


Laser-cut, heat-treated, precision-ground ventilated brake disk for XB8 ensures vibration-free operation. Rotating mass is reduced without sacrificing strength or durability.

click to enlarge
(click to enlarge)


Fit: XB808, XB9 cars and XB8.



click to enlarge
(click to enlarge)


#351158 XB8 Composite Chassis Side Guards L+R w/out Rib

• Softer flex
• No reinforcement ribs
• Side protection

click to enlarge
(click to enlarge)


Tough composite XB8 side guards give improved side protection, and fit perfectly against the chassis to seal against dirt. Without reinforcement ribs these guards give softer flex.

Must be used with either of these chassis:
#351106 XB9 Alu Chassis - Swiss 7075 T6 3mm - Hard Coated - V2
#351108 XB8 Alu Chassis - Swiss 7075 T6 (3mm) – Hardcoated
#351109 XB8E Alu Chassis - Swiss 7075 T6 (3mm) – Hardcoated



click to enlarge
(click to enlarge)


#358278 XRAY Progressive Springs - Medium-Hard - 4 stripes (2)
#358281 XRAY Long Progressive Springs - Medium-Hard - 4 stripes (2)

• Medium-hard progressive springs
• Better steering at corner entry
• For high traction tracks
• Marked with FOUR stripes for easy identification
• Individually measured and controlled
• Individually inspected and matched
• For XB8, XB808 and XB9

click to enlarge
(click to enlarge)


New MEDIUM-HARD progressive springs have medium firmness at the beginning of the compression but become firmer as the spring is compressed more in the middle, with hard firmness at the end. Marked with FOUR stripes for easy identification. Set of 2. Fit XB808, XB9, XB8, and XT9.

Ultimate high-performance racing springs give you additional precision tuning options for your XRAY model racing car. Developed through extensive testing and racing experience, these racing springs were designed and precision-crafted to have a more progressive rate than standard XRAY racing springs. As the car enters the corner, the spring has medium firmness to generate medium grip, but as soon the car inclines the springs achieve a hard firmness to achieve a higher cornering speed.

Available as a pair of springs, the springs are individually measured, controlled, inspected and matched to provide identical damping characteristics. During the selection process, each spring is compressed in several fine increments and the values recorded, and then each spring is matched with another spring of identical characteristics. XRAY goes the extra mile to ensure perfect spring matches, giving your car the predictability and consistency that you need to help you lead the pack.


Fit: XB808, XB9 cars, XB8 and XB8E.



click to enlarge
(click to enlarge)


#352492 XB8 Front Anti-Roll Bar 2.2mm
#352494 XB8 Front Anti-Roll Bar 2.4mm - standard
#352496 XB8 Front Anti-Roll Bar 2.6mm

• Front anti-roll bar
• Laser engraved
• Easy identification
• Premium heat-treated spring steel wire

click to enlarge
(click to enlarge)


Optional front spring steel anti-roll bars for XB8. This optional anti-roll bars offer different anti-roll stiffness adjustment so that you can fine-tune the set-up of your chassis with maximum finesse. The anti-roll bars are laser-engraved for easy and instant recognition. Black color.

click to enlarge
(click to enlarge)


Fits: XB8'14.



click to enlarge
(click to enlarge)


#352231 Alu Steering Kingpin Plate - Swiss 7075 T6 - 14° (L+R) - standard
#352235 Alu Steering Kingpin Plate - Swiss 7075 T6 - 10° (L+R)
#352237 Alu Steering Kingpin Plate - Swiss 7075 T6 - 6° (L+R)

• optional 6° and 10° kingpin
• Quick & easy geometry adjustment
• Fits XPBS™
• L+R set
• Swiss 7075 T6 aluminum
• Black color-coated
• Laser engraved

click to enlarge
(click to enlarge)


Stiff alu steering kingpin plates made from Swiss 7075 T6 aluminum with integrated 10° and 14° kingpin. Set of L+R.

XRAY Pivot Ball Suspension XPBS™ is a uniquely innovative concept, and smart R&D design. The ultra-robust pivot ball suspension has integrated suspension geometry adjustment, with different kingpin plates being the only optionally-available tuning parts.



 
  T4 & X1win At International Indoor Championship In US    
  XB4 European Vice-Champion & Junior Champion 2016 In 1/10 4WD Electric Buggy    
  XRAY European Vice-Championship 2016    
  Bruno Coelho & XB4 EOS Champions 2016    
  XRAY X12 Is Triple European Champion    
  X12 BRCA 1/12 UK Champion 2016    
  XRAY 3x Win & 3x TQ At ROAR Carpet Nationals, US    
  XRAY 3x Win & 4x TQ At TITC 2016    
  T4, X1 & X12 Win Snowbirds 2016 - 4x WIN & 4x TQ    
  The largest and most powerful set-up sheet database in the world..    
 
   
  All artwork & webdesign by XRAY. All content © 1999 - 2009 by XRAY • Terms of use • Privacy & security