xrayxrayHome XRAY homeXRAY X-shopXRAY X-forumRCAmerica
supportsearchcontactguestbooksite map
newsproductsaboutusworldwide headlines

 

XRAY presents new authentic option parts for XRAY XII, XII Link, X10 and X10 Link:

click to enlarge
(click to enlarge)


#378096 Shock Spring Progressive C=2.0-2.5 - Black - 2 Dots

• Increased traction
• Increased off-power steering
• Increased steering response
• Laser engraved for easy identification

click to enlarge
(click to enlarge)


Shock spring for central shock absorber with progressive C=2.0-2.5 spring rate. Increased overall traction, steering response, and off-power steering.

Fits: XII, X12 and X10 cars.



click to enlarge
(click to enlarge)


#371014 X10'18 Alu Flex Chassis 2.0mm - 7075 T6
#371156 X10'18 Alu Rear Pod Lower Plate 2.0mm - 7075 T6

• Flex cutout openings
• Increased flex
• Increased traction
• Increased steering
• For low, medium and high traction tracks
• 2mm thickness
• Black anodized

click to enlarge
(click to enlarge)


Aluminum X10'18 chassis and rear pod lower plate designed to increase traction, stability, and steering in specific conditions. The alu chassis provides better control and makes the car easier to drive. This innovative alu chassis has been extensively tested and is recommended for low-, medium-, and high-traction tracks. CNC-machined from 2mm thick premium Swiss 7075 T6, additionally black coated.

For use with alu pod plate #371156.

click to enlarge
(click to enlarge)


Due the nature of the aluminum material and the machining process, it is normal that the chassis may be slightly bent in the longitudinal direction.

Fit: X10'18.



click to enlarge
(click to enlarge)


#375872 Composite Spur Gear - 72T / 64P
#375875 Composite Spur Gear - 75T / 64P

• Precision-molded composite spur gears
• Popular sizes available

click to enlarge
(click to enlarge)


New precision-moulded composite spur gears 72 & 75 tooth, 64-pitch. Popular sizes available.

click to enlarge
(click to enlarge)


Fit: XII, X12, X10 & X1 cars.



click to enlarge
(click to enlarge)


#372330-O X12 US Alu Bushing – Centric (2)
#372331-O X12 US Alu Bushing – Eccentric 0.5mm (2)
#372332-O X12 US Alu Bushing - Eccentric 1.0mm (2)

• Eccentric inserts
• Quick & easy change
• For track width adjustment
• Fits US edition only
• Various sizes available
• Set of 2 pcs

click to enlarge
(click to enlarge)


Smart eccentric aluminum bushings allow for quick & easy track-width changes to adapt to track conditions.

Optional aluminum 0.5mm and 1.0mm eccentric bushings are used to set the track-width either narrower or wider to adapt to track conditions. Set of 2.


Fits: X12'18 EU, X12'18 US.



click to enlarge
(click to enlarge)


#378095 Shock Spring Progressive C=1.4-1.9 – Black – 1 dot

• Increased traction
• Increased steering response
• Increased off-power steering

click to enlarge
(click to enlarge)


Shock spring for central shock absorber with progressive C=1.4-1.9. Increased overall traction, steering response, and off-power steering.

Fits: XII, X12 and X10 cars.



click to enlarge
(click to enlarge)


#371008 X10'16 Alu Flex Chassis 2.0mm - 7075 T6
#371152 X10'16 Alu Rear Pod Lower Plate 2.0mm - 7075 T6

• Flex cutout openings
• Increased flex
• Increased traction
• Increased steering
• For low, medium and high traction tracks
• 2mm thickness
• Black anodized


click to enlarge
(click to enlarge)


Aluminum X10'16 chassis and rear pod lower plate designed to increase traction, stability, and steering in specific conditions. The alu chassis provides better control and makes the car easier to drive. This innovative alu chassis has been extensively tested and is recommended for low, medium and high traction tracks. CNC-machined from 2mm thick premium Swiss 7075 T6, additionally black coated.

For use with alu pod plate #371152.


click to enlarge
(click to enlarge)


Fit: X10'16.



click to enlarge
(click to enlarge)


#371108 X12'17 Alu Chassis 2.0mm - 7075 T6
#371154 X12'17 Alu Rear Pod Lower Plate 2.0mm - 7075 T6

• Increased traction, steering, and stability in specific conditions
• Black anodized
• Laser engraved

click to enlarge
(click to enlarge)


Aluminum X12’17 chassis and rear pod lower plate designed and developed to increase traction, stability, and steering in specific conditions. The alu chassis and rear pod lower plate provide better control and make the car easier to drive. Extensively tested and recommended for low, medium, and high-traction tracks.

CNC-machined from 2mm thick premium Swiss 7075 T6, and additionally black coated.

click to enlarge
(click to enlarge)


Fit X12'17.



click to enlarge
(click to enlarge)


#371220 X12 Foam Bumper

• Special foam material
• Lightweight
• Strong
• Protection

click to enlarge
(click to enlarge)


High-quality foam bumper for X12, hand-cut from specially-developed foam material. Very light, yet very strong. Protects front of car in hard collisions.

Fits: XII and X12 cars.



click to enlarge
(click to enlarge)


#372317-O Alu Eccentric Bushing 0.5mm - Orange (2)
#372318-O Alu Eccentric Bushing 1.0mm - Orange (2)

• Eccentric inserts
• Track width adjustment
• Quick & easy change
• Various sizes available
• Aluminum
• Orange color
• Set of 2pcs

click to enlarge
(click to enlarge)


Smart eccentric aluminum inserts for quick & easy track-width changes. Optional eccentric aluminum bushings 0.5mm and 1.0mm are used to set narrower or wider track-width. Orange color. Set of 2.

click to enlarge
(click to enlarge)


Fit: X12'14, X12'15 and X10'15.



click to enlarge
(click to enlarge)


#372012 Composite Front Upper Arm Mount - Right – Graphite
#372022 Composite Front Upper Arm Mount - Left - Graphite
#372113 Composite Suspension Arm Front Lower - Right - Graphite
#372123 Composite Suspension Arm Front Lower - Left – Graphite

• Special graphite composite mixture
• Lightweight
• Extra strong
• Improved steering response
• Higher stability
• Marked for easy identification

click to enlarge
(click to enlarge)


Front upper arm mount and lower suspension arms for X10 and X12 cars made from specially-formulated graphite composite material. The extra strong material makes the car more stable and improves steering response, recommended for high-traction conditions or in hot weather. Marked “R” and “L” for easy identification.



click to enlarge
(click to enlarge)


#372011 Composite Front Upper Arm Mount - Right - Hard
#372021 Composite Front Upper Arm Mount - Left - Hard

• Special hard composite material
• For high traction, high temperatures
• Higher stability
• Marked for easy identification

click to enlarge
(click to enlarge)


Front upper arm mounts and lower suspension arms for X10 and X12 cars made from new hard composite material. The hard composite material makes the car more stable, recommended for high-traction conditions or in hot weather. Marked “R” and “H” for easy identification.

click to enlarge
(click to enlarge)



click to enlarge
(click to enlarge)


#372316 Alu Eccentric Bushing 0.0mm (2)
#372317 Alu Eccentric Bushing 0.5mm (2)
#372318 Alu Eccentric Bushing 1.0mm (2)

• Eccentric inserts
• Track width adjustment
• Quick & easy change
• Various sizes available
• Aluminum
• Set of 2pcs

click to enlarge
(click to enlarge)


Smart eccentric aluminum inserts which allow quick and easy change and track-width set-up according to track conditions. Optional eccentric aluminum 0.5mm and 1.0mm are used to set narrower or wider track-width. Set of 2.

Fit: X12’14, X12'15 and X10'15.



click to enlarge
(click to enlarge)


#373584 Side Spring C=0.6 - Silver (2)
#373585 Side Spring C=0.9 - Gold (2)
#373586 Side Spring C=1.2 - Black (2)

• straight side springs
• improved side traction
• improved handling
• consistency
• smoother compression
• reduced traction rolling

click to enlarge
(click to enlarge)


Side springs for X12’14. The new side springs and spring caps feature a new straight design comparing to the previously used conical shape, to improve side traction and improve the handling of the car. The straight side springs have more consistent and smoother compression which results in a smoother out-of-corner exit as well as helping to prevent traction rolling. Set of 2.

click to enlarge
(click to enlarge)

click to enlarge
(click to enlarge)


Fit: XII Link, X12, X12'14, X10 and X10 Link.



click to enlarge
(click to enlarge)


#375012 Rear Axle Shaft - HUDY Spring Steel™

• Strong rear axle assembly for XRAY XII, X12 or XRAY X10
• Tough shaft is specially machined for perfect balance and smoothness with zero run-out for vibration-free operation
• Made from HUDY Spring Steel™

click to enlarge
(click to enlarge)


Strong rear axle assembly for XRAY XII, X12 or XRAY X10 features tough shaft that is specially machined for perfect balance and smoothness with zero run-out for vibration-free operation. Made from HUDY Spring Steel™.

click to enlarge
(click to enlarge)



click to enlarge
(click to enlarge)

click to enlarge
(click to enlarge)
#372131 Composite Front Upper Suspension Arm - Hard

• Molded composite front upper suspension arm
• Hard material
• Fits L+R sides

Molded composite front upper suspension arm & ball joint for XRAY XII and X10. Hard material. Fits left or right sides.

click to enlarge
(click to enlarge)
#372211 Composite Steering Block - Right – Hard

• Molded composite steering block
• Hard material
• Marked for easy identification

Molded composite RIGHT steering block for XRAY XII and X10. Hard material. Marked “R” for easy identification. Use with matching left steering block (372221).

click to enlarge
(click to enlarge)
#372221 Composite Steering Block - Left – Hard

• Molded composite steering block
• Hard material
• Marked for easy identification

Molded composite LEFT steering block for XRAY XII and X10. Hard material. Marked “L” for easy identification. Use with matching right steering block (372211).

click to enlarge
(click to enlarge)


Fits: XII, XII Link, X10 and X10 Link.



click to enlarge
(click to enlarge)

click to enlarge
(click to enlarge)
#378093 Shock Spring C=1.8 - Gold

• Shock spring for XRAY XII & X10 Link central shock absorber
• Medium hardness
• Increases stability
• Easier to drive on medium-to-high traction tracks
• Improves initial steering
• Recommended for medium-high traction tracks


Shock spring for XRAY XII or X10 Link central shock absorber, medium hardness. Increases stability and ease of driving on medium-to-high traction tracks. Improves initial steering. Recommended for medium-high traction tracks.

click to enlarge
(click to enlarge)
#378094 Shock Spring C=2.1 - Black

• Shock spring for XRAY XII & X10 Link central shock absorber
• Stiff hardness
• Increases stability
• Improves initial steering
• Recommended for high- traction tracks


Shock spring for XRAY XII or X10 Link central shock absorber, stiff hardness. Increases stability and ease of driving on high-grip tracks. Improves initial steering. Recommended for high-traction tracks.


Fits: XII Link and X10 Link.



click to enlarge
(click to enlarge)


#375876 Composite Spur Gear - 76T / 64P
#375878 Composite Spur Gear - 78T / 64P
#375880 Composite Spur Gear - 80T / 64P

• Precision-molded composite spur gears
• 64-pitch
• Popular sizes available

click to enlarge
(click to enlarge)


Precision-moulded composite spur gears, 64-pitch. Popular sizes available.



click to enlarge
(click to enlarge)


#373582 Tapered Spring C=1.4 - Gold (2)
#373583 Tapered Spring C=1.7 - Black (2)

• Tapered spring for XRAY XII & X10 Link cars
• Perfectly matched springs rates & lengths
• Tweak-free pod mounting
• Medium or Hard hardness
• Set of 2

click to enlarge
(click to enlarge)


Tapered spring for XRAY XII & X10 Link cars. Perfectly matched springs rates & lengths to ensure tweak-free pod mounting. Medium or Hard hardness. Set of 2.

Fits: XII Link and X10 Link.



click to enlarge
(click to enlarge)


#373241 Composite Pivot Ball Universal 6.0mm (2)

• Composite pivot balls
• Smoother suspension movement
• Set of 2

Composite pivot balls for smoother suspension movement. Set of 2.

click to enlarge
(click to enlarge)



click to enlarge
(click to enlarge)


#375011 Alu Rear Axle Shaft

• 1-piece design of axle
• Lightweight and strong rear axle assembly for pan cars
• Swiss 7075 T6 aluminum
• super-light and tough alu shaft
• specially machined for perfect balance and smoothness
• zero run-out
• vibration-free operation

click to enlarge
(click to enlarge)


Lightweight and strong rear axle assembly for XRAY XII or XRAY X10 features a super-light and tough alu shaft that is specially machined for perfect balance and smoothness with zero run-out for vibration-free operation. Made from Swiss 7075 T6 aluminum.

Fits: XII, XII Link, X10 and X10 Link.



click to enlarge
(click to enlarge)


#372080 Front Alu Active Brace - Set

• Aluminium front active brace
• Prevents chassis tweak
• Complete set
• Two building alternatives

click to enlarge
(click to enlarge)


Aluminium front active brace set for XII pan car prevents chassis tweak in a hard crash.

Two building alternatives:

click to enlarge
(click to enlarge)


Alternative 1 uses rubber O-rings. Makes brace softer, softens front
suspension and increases front car traction and steering.

click to enlarge
(click to enlarge)


Alternative 2 uses aluminium roller. Makes brace stiffer, stiffens front
suspension stiffer and decreases steering.


*************************************************************************************************

click to enlarge
(click to enlarge)


• Tweak-free servo mount plate
• Unique XRAY design
• Eliminates chassis tweak
• Positioned in the centerline
• Servo mounted independently
• Graphite plate
• Aluminum stands
• For micro & mid-size servos

click to enlarge
(click to enlarge)


#376215 Graphite Center Servo Mount + Alu Stands - Set (Mid-size)
#376216 Graphite Center Servo Mount + Alu Stands - Set (Micro)

XRAY Tweak-free Servo Mount Plate eliminates chassis tweak caused by improper servo mounting.

The mount plate is centrally mounted along the chassis centerline while the servo is mounted independently on aluminum stands on the graphite servo mount plate. This design ensures that the servo is mounted independently of the chassis and will not produce any unwanted chassis tweak. The graphite servo mount is mounted independently from the chassis to the chassis stays flat and untweaked.

click to enlarge
(click to enlarge)


#376215 fits mid-size servos.
#376216 fits micro servos.


*************************************************************************************************

click to enlarge
(click to enlarge)


• 2.5mm chassis & rear pod
• Thicker material than kit version
• For high-traction conditions
• CNC-machined
• High-grade graphite material
• For carpet & asphalt racing


#371101 XII Chassis - 2.5mm Graphite

CNC-machined optional 4-cell chassis for XRAY XII made from 2.5mm high-grade graphite material with a specially-designed compound for carpet racing and asphalt racing. Chassis layout is optimally designed to provide proper stiffness for excellent handling, while being flexible enough
to generate good grip and traction. This thicker (harder) chassis is best
used in higher-traction conditions. Must be also used with #371141 graphite
2.5mm rear lower plate.

click to enlarge
(click to enlarge)


#371141 Graphite 2.5mm Rear Pod Lower Plate

CNC-machined rear pod lower plate for XRAY XII made from
2.5mm premium-grade graphite material. Countersunk holes for smooth flat
bottom. This thicker (harder) rear lower pod plate is best used in
higher-traction conditions. Must be used with #371101 XII Chassis 2.5mm
Graphite.

click to enlarge
(click to enlarge)


Knowing that every small detail impacts the handling and performance of a
high-performance car, XRAY CNC-machines every graphite chassis component
in-house using the most modern German milling machines. All machines are
fully robotically operated and controlled to ensure that every chassis meets
the tightest manufacturing tolerances.


*************************************************************************************************

click to enlarge
(click to enlarge)


#372180 Front Coil Spring C=3.5 - Gold (2)
#372181 Front Coil Spring C=4.0 - Silver (2)
#372182 Front Coil Spring C=5.0 - Black (2)
#372183 Front Coil Spring C=6.0 - Grey (2)

click to enlarge
(click to enlarge)


• New pan car front springs
• Powder color-coded
• Quick & easy identification
• Same thickness wire
• Stiffness controlled by coils

click to enlarge
(click to enlarge)


Newly-released ultimate-match front coil shock springs for pan car front
suspension offer an additional range of choices to fine-tune your car.
Powder color-coded for quick & easy identification. Set of 2.

click to enlarge
(click to enlarge)


Developed through extensive testing and racing experience. Stiffness is controlled by the thickness of the wire and also by the number of coils; softer springs have a lower "C" value, while stiffer springs have a higher "C" value.

click to enlarge
(click to enlarge)

 
  T4 Is Double ETS Champion    
  XT8E Wins At 1/8 Off-Road ROAR E-Nats In US    
  GTX8 Is European Vice-Champion    
  XT8 Is US National Champion    
  XB4 & XT2 Are EOS 2016/2017 Champions    
  XB8E'17 Wins At The NEO Race    
  X12 Is Double European Champion    
  X12 Wins At 2017 ROAR Nationals    
  T4 Wins At 2017 TITC    
  XRAY T4 Double Win At Snowbird Nationals 2017    
  The largest and most powerful set-up sheet database in the world..    
 
   
  All artwork & webdesign by XRAY. All content © 1999 - 2009 by XRAY • Terms of use • Privacy & security