|
|
| XRAY presents new authentic option parts for XRAY XII, XII Link, X10 and X10 Link: |
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
|
| Side springs C=0.5 for pan cars and formula cars. The side springs and spring caps feature a straight design to improve side traction and handling. The straight springs have more consistent and smoother compression which results in smoother out-of-corner exit as well as helping to prevent traction rolling. Black color. Set of 2. |
|
(click to enlarge) |
|
|
|
#371123 X12 Carbon 1-Piece Chassis 2.0mm
• 1-piece carbon chassis
• More flexible than aluminum chassis
• Generates more traction
• For low traction carpet and asphalt
• Premium high-grade carbon material made in USA
|
|
(click to enlarge) |
|
|
|
X12 carbon 1-piece chassis reduces drag and improves cornering speed. The carbon material ensures the chassis is more flexible than the aluminum chassis and generates more tractions. Suggested for low traction carpet & asphalt tracks.
CNC-machined from premium high-grade carbon fiber material made in USA. |
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
|
Ultimate-match front coil springs for pan car front suspension with 4mm king pin axle offer an additional range of choices to fine-tune your car. Powder color-coded for quick & easy identification. Black color. Set of 2.
Developed through extensive testing and racing experience. Stiffness is controlled by the thickness of the wire and by the number of coils; softer springs have a lower "C" value, while stiffer springs have a higher "C" value. |
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
|
Carbon super-thin chassis side braces from thin 1.0mm carbon material.
The thinner 1.0mm side braces increase overall traction, making the X12 more forgiving on the track.
Suitable for low traction carpet and asphalt tracks.
Side braces accommodate special low profile, lightweight bushings to reduce the chances of chassis tweak, and for a low CG.
CNC-machined from premium high-grade carbon fiber material made in USA.
|
|
(click to enlarge) |
|
|
|
#371224 X12 Rubber Bumper 3D – GT
• Rubber 3D printed bumper for 1/12 GT
• Exceptionally lightweight
• Durable material doesn’t fold or break
• High aerodynamic efficiency
• Shape improves front support of the GT12 body
• More airflow for improved grip
• Fits all modern GT12 bodyshells
• Suggested to use with touring car body posts #301322
|
|
(click to enlarge) |
|
|
|
| Rubber 3D printed bumper designed specially for GT12 bodies is exceptionally light as well as durable. The 3D printed material doesn't fold or break in crashes, and allows more airflow under the body, improving front traction. The shape of the bumper improves front support of the body and ensures high aerodynamic efficiency. Fits GT12 bodies. Suggested to use with touring car body posts #301322 |
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
|
Ultra lightweight ball end 6.0mm with hex cavity, for connection to molded composite ball joints. Made from aluminum material, for significant weight savings over the steel part. Black-coated for increased lifespan.
CNC-machined from high-quality Swiss 7075 T6 aluminum.
Set of 2. |
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
|
#375009 X12 Ball Differential - Set
- Complete ball differential set
- Direct replacement for gear differential
- Increases on-power steering
- Improves stability
- Easier to drive
- For very low grip conditions
- Fits all X12 from 2017 onwards
|
|
(click to enlarge) |
|
|
|
Complete ball differential set for the X12 is direct replacement for the gear differential with no other extra parts and no extra adjustments. Using the ball differential makes the car more stable and easier to drive, especially in very low grip conditions such as asphalt or low grip carpet
The ball diff increases on-power steering which is needed on almost all types of tracks.
#375009 X12 Ball Differential - Set
|
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
|
Ultimate-match front coil shock springs for pan car front suspension with 4mm king pin axle offer an additional range of choices to fine-tune your car. Powder color-coded for quick & easy identification. Silver color. Set of 2.
Developed through extensive testing and racing experience. Stiffness is controlled by the thickness of the wire and also by the number of coils; softer springs have a lower "C" value, while stiffer springs have a higher "C" value.
Fits X12'21
|
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
|
Shock spring for central shock absorber with progressive C=3.1 spring rate. Improves steering and response. Laser engraved 4 dots for easy recognition.
Fits X12 & X10
#378098 Shock Spring C=3.1 - Black - 4 Dots
|
|
(click to enlarge) |
|
|
|
#371118 X12'21 Graphite Chassis 2.5mm
•? 2.5 mm hard graphite material
•? Specially designed compound softer than alu
•? Generates more traction
•? For low grip carpet & asphalt
•? Fits X12’21 with front Tweak-Free suspension
|
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
|
CNC-machined X12’21 chassis made from 2.5mm hard high-grade graphite material with a specially-designed compound which is a good option for low grip carpet racing, as well as asphalt. The graphite material is softer than aluminum, allowing the chassis to generate more traction.
The chassis was redesigned to accommodate the front Tweak-Free Suspension and the rear Tweak-Free POD System. The side link mounting system was redesigned as well and is mounted directly to the chassis and the chassis features slots for adjustment of the servo mount position
Fits X1’21
#371118 X12'21 Graphite Chassis 2.5mm
|
|
(click to enlarge) |
|
|
|
#372285 X12 King Pin 4mm - 0.5Ă‚° (2)
•? 4mm Kingpin
•? Integrated camber
•? For precise suspension geometry adjustment
•? Polished for smooth operation
•? Hardened steel
•? High durability
•? Different camber available
•? Long life
•? Set of 2
|
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
|
CNC-machined X12•20 chassis made from 2.0mm Swiss 7075 T6 aluminum which is suitable for high- and very-high traction US-style tracks. This chassis makes the car easier to drive, keeps more cornering speed, and helps prevent traction rolling.
The chassis was redesigned with a significantly narrower shape that ensures the chassis will not have drag in high speed corners which increases steering response and increases high-speed steering.
The chassis includes updated design of the grooves for the graphite battery backstop which allows more secure battery mounting and adjustment in the most frequently-used cross-chassis position. The updated design of the chassis also accommodates the new side link mounting system.
The shorter chassis design, complemented with elevated graphite bumper holder, prevents chassis from touching the track surface at the front, allows for increased steering and more consistent handling • particularly in high-traction conditions • which results in increased off-power steering.
Fits: X12'20. X12'19. |
|
|
|
|
(click to enlarge) |
|
|
|
#375000 XRAY Solid Axle 1/12 Pan Car - Set
Rear solid axle set includes graphite solid axle shaft, alu rear wheel hub and hardware. Super-light and tough graphite shaft gives perfect balance and smoothness for vibration-free operation.
|
|
(click to enlarge) |
|
|
|
Ultra-light, ultra-strong eccentric upper clamp for ball-bearing (without use of composite hub), CNC-machined from premium Swiss 7075 T6 aluminum. Eccentric upper clamps allow movement of the rear axle 1mm forward or rearward depending on the clamp orientation.
A shorter car rotates faster in slow corners and has improved forward traction. A longer car is freer in high-speed corners and will feel more linear, especially during fast direction changes.
Additionally black coated for long life and stylish look. Identical left/right. Fits alu rear bulkheads with quick & easy ride height adjustment.
Fits X12 and X1.
|
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
|
Shock spring for central shock absorber with progressive C=2.0-2.5 spring rate. Increased overall traction, steering response, and off-power steering.
Fits: XII, X12 and X10 cars. |
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
|
Aluminum X10'18 chassis and rear pod lower plate designed to increase traction, stability, and steering in specific conditions. The alu chassis provides better control and makes the car easier to drive. This innovative alu chassis has been extensively tested and is recommended for low-, medium-, and high-traction tracks. CNC-machined from 2mm thick premium Swiss 7075 T6, additionally black coated.
For use with alu pod plate #371156.
|
|
(click to enlarge) |
|
|
|
Due the nature of the aluminum material and the machining process, it is normal that the chassis may be slightly bent in the longitudinal direction.
Fit: X10'18. |
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
|
| New precision-moulded composite spur gears 72 & 75 tooth, 64-pitch. Popular sizes available. |
|
(click to enlarge) |
|
|
|
| Fit: XII, X12, X10 & X1 cars. |
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
|
Smart eccentric aluminum bushings allow for quick & easy track-width changes to adapt to track conditions.
Optional aluminum 0.5mm and 1.0mm eccentric bushings are used to set the track-width either narrower or wider to adapt to track conditions. Set of 2.
Fits: X12'18 EU, X12'18 US. |
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
|
Shock spring for central shock absorber with progressive C=1.4-1.9. Increased overall traction, steering response, and off-power steering.
Fits: XII, X12 and X10 cars. |
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
|
Aluminum X10'16 chassis and rear pod lower plate designed to increase traction, stability, and steering in specific conditions. The alu chassis provides better control and makes the car easier to drive. This innovative alu chassis has been extensively tested and is recommended for low, medium and high traction tracks. CNC-machined from 2mm thick premium Swiss 7075 T6, additionally black coated.
For use with alu pod plate #371152.
|
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
|
Aluminum X12’17 chassis and rear pod lower plate designed and developed to increase traction, stability, and steering in specific conditions. The alu chassis and rear pod lower plate provide better control and make the car easier to drive. Extensively tested and recommended for low, medium, and high-traction tracks.
CNC-machined from 2mm thick premium Swiss 7075 T6, and additionally black coated.
|
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
|
High-quality foam bumper for X12, hand-cut from specially-developed foam material. Very light, yet very strong. Protects front of car in hard collisions.
Fits: XII and X12 cars. |
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
|
| Smart eccentric aluminum inserts for quick & easy track-width changes. Optional eccentric aluminum bushings 0.5mm and 1.0mm are used to set narrower or wider track-width. Orange color. Set of 2. |
|
(click to enlarge) |
|
|
|
| Fit: X12'14, X12'15 and X10'15. |
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
|
| Front upper arm mount and lower suspension arms for X10 and X12 cars made from specially-formulated graphite composite material. The extra strong material makes the car more stable and improves steering response, recommended for high-traction conditions or in hot weather. Marked •?R•? and •?L•? for easy identification. |
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
|
| Front upper arm mounts and lower suspension arms for X10 and X12 cars made from new hard composite material. The hard composite material makes the car more stable, recommended for high-traction conditions or in hot weather. Marked •?R•? and •?H•? for easy identification. |
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
|
Smart eccentric aluminum inserts which allow quick and easy change and track-width set-up according to track conditions. Optional eccentric aluminum 0.5mm and 1.0mm are used to set narrower or wider track-width. Set of 2.
Fit: X12’14, X12'15 and X10'15. |
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
|
| Side springs for X12’14. The new side springs and spring caps feature a new straight design comparing to the previously used conical shape, to improve side traction and improve the handling of the car. The straight side springs have more consistent and smoother compression which results in a smoother out-of-corner exit as well as helping to prevent traction rolling. Set of 2. |
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
|
| Fit: XII Link, X12, X12'14, X10 and X10 Link. |
|
(click to enlarge) |
|
|
|
#375012 Rear Axle Shaft - HUDY Spring Steel•?
•? Strong rear axle assembly for XRAY XII, X12 or XRAY X10
•? Tough shaft is specially machined for perfect balance and smoothness with zero run-out for vibration-free operation
•? Made from HUDY Spring Steel•? |
|
(click to enlarge) |
|
|
|
| Strong rear axle assembly for XRAY XII, X12 or XRAY X10 features tough shaft that is specially machined for perfect balance and smoothness with zero run-out for vibration-free operation. Made from HUDY Spring Steel•?. |
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
(click to enlarge) |
#372131 Composite Front Upper Suspension Arm - Hard
•? Molded composite front upper suspension arm
•? Hard material
•? Fits L+R sides
Molded composite front upper suspension arm & ball joint for XRAY XII and X10. Hard material. Fits left or right sides. |
|
(click to enlarge) |
#372211 Composite Steering Block - Right – Hard
•? Molded composite steering block
•? Hard material
•? Marked for easy identification
Molded composite RIGHT steering block for XRAY XII and X10. Hard material. Marked •?R•? for easy identification. Use with matching left steering block (372221). |
|
(click to enlarge) |
#372221 Composite Steering Block - Left – Hard
•? Molded composite steering block
•? Hard material
•? Marked for easy identification
Molded composite LEFT steering block for XRAY XII and X10. Hard material. Marked •?L•? for easy identification. Use with matching right steering block (372211). |
|
(click to enlarge) |
|
|
|
| Fits: XII, XII Link, X10 and X10 Link. |
|
(click to enlarge) |
|
|
(click to enlarge) |
#378093 Shock Spring C=1.8 - Gold
•? Shock spring for XRAY XII & X10 Link central shock absorber
•? Medium hardness
•? Increases stability
•? Easier to drive on medium-to-high traction tracks
•? Improves initial steering
•? Recommended for medium-high traction tracks |
|
|
| Shock spring for XRAY XII or X10 Link central shock absorber, medium hardness. Increases stability and ease of driving on medium-to-high traction tracks. Improves initial steering. Recommended for medium-high traction tracks. |
|
(click to enlarge) |
#378094 Shock Spring C=2.1 - Black
•? Shock spring for XRAY XII & X10 Link central shock absorber
•? Stiff hardness
•? Increases stability
•? Improves initial steering
•? Recommended for high- traction tracks |
|
|
| Shock spring for XRAY XII or X10 Link central shock absorber, stiff hardness. Increases stability and ease of driving on high-grip tracks. Improves initial steering. Recommended for high-traction tracks. |
|
|
| Fits: XII Link and X10 Link. |
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
|
| Precision-moulded composite spur gears, 64-pitch. Popular sizes available. |
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
|
Tapered spring for XRAY XII & X10 Link cars. Perfectly matched springs rates & lengths to ensure tweak-free pod mounting. Medium or Hard hardness. Set of 2.
Fits: XII Link and X10 Link. |
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
|
#375011 Alu Rear Axle Shaft
•? 1-piece design of axle
•? Lightweight and strong rear axle assembly for pan cars
•? Swiss 7075 T6 aluminum
•? super-light and tough alu shaft
•? specially machined for perfect balance and smoothness
•? zero run-out
•? vibration-free operation |
|
(click to enlarge) |
|
|
|
Lightweight and strong rear axle assembly for XRAY XII or XRAY X10 features a super-light and tough alu shaft that is specially machined for perfect balance and smoothness with zero run-out for vibration-free operation. Made from Swiss 7075 T6 aluminum.
Fits: XII, XII Link, X10 and X10 Link. |
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
|
| Aluminium front active brace set for XII pan car prevents chassis tweak in a hard crash. |
| Two building alternatives: |
|
|
|
(click to enlarge) |
|
|
|
Alternative 1 uses rubber O-rings. Makes brace softer, softens front
suspension and increases front car traction and steering. |
|
(click to enlarge) |
|
|
|
Alternative 2 uses aluminium roller. Makes brace stiffer, stiffens front
suspension stiffer and decreases steering. |
|
|
*************************************************************************************************
|
|
(click to enlarge) |
|
|
|
•? Tweak-free servo mount plate
•? Unique XRAY design
•? Eliminates chassis tweak
•? Positioned in the centerline
•? Servo mounted independently
•? Graphite plate
•? Aluminum stands
•? For micro & mid-size servos
|
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
|
#376215 fits mid-size servos.
#376216 fits micro servos. |
|
|
*************************************************************************************************
|
|
(click to enlarge) |
|
|
|
•? 2.5mm chassis & rear pod
•? Thicker material than kit version
•? For high-traction conditions
•? CNC-machined
•? High-grade graphite material
•? For carpet & asphalt racing
|
|
|
#371101 XII Chassis - 2.5mm Graphite
CNC-machined optional 4-cell chassis for XRAY XII made from 2.5mm high-grade graphite material with a specially-designed compound for carpet racing and asphalt racing. Chassis layout is optimally designed to provide proper stiffness for excellent handling, while being flexible enough
to generate good grip and traction. This thicker (harder) chassis is best
used in higher-traction conditions. Must be also used with #371141 graphite
2.5mm rear lower plate. |
|
(click to enlarge) |
|
|
|
#371141 Graphite 2.5mm Rear Pod Lower Plate
CNC-machined rear pod lower plate for XRAY XII made from
2.5mm premium-grade graphite material. Countersunk holes for smooth flat
bottom. This thicker (harder) rear lower pod plate is best used in
higher-traction conditions. Must be used with #371101 XII Chassis 2.5mm
Graphite.
|
|
(click to enlarge) |
|
|
|
Knowing that every small detail impacts the handling and performance of a
high-performance car, XRAY CNC-machines every graphite chassis component
in-house using the most modern German milling machines. All machines are
fully robotically operated and controlled to ensure that every chassis meets
the tightest manufacturing tolerances. |
|
|
*************************************************************************************************
|
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
|
•? New pan car front springs
•? Powder color-coded
•? Quick & easy identification
•? Same thickness wire
•? Stiffness controlled by coils
|
|
(click to enlarge) |
|
|
|
Newly-released ultimate-match front coil shock springs for pan car front
suspension offer an additional range of choices to fine-tune your car.
Powder color-coded for quick & easy identification. Set of 2. |
|
(click to enlarge) |
|
|
