xrayxrayHome XRAY homeXRAY X-shopXRAY X-forumRCAmerica
supportsearchcontactguestbooksite map
newsproductsaboutusworldwide headlines

 
XRAY presents authentic option parts for XRAY RX8:

click to enlarge
(click to enlarge)

#334061-K Alu Brake Post Arm - Swiss 7075 T6 - Black

• More direct and precise braking
• Ultra-strong construction
• Long life
• Durable
• SWISS 7075 T6 Aluminum
• Black coated
• Fits NT1 & RX8

click to enlarge
(click to enlarge)

Aluminum brake post arm allows more direct and precise braking. Ultra-strong construction provides very long life and durability. CNC-machined from premium Swiss 7075 T6 aluminum. Black coated.




click to enlarge
(click to enlarge)

#345800-G Composite Belt Pulley Cover Set - Graphite
#345801-G Low Friction Composite Belt Pulley - Set - Graphite
#345820-G Low Friction C. 2-Speed Belt Pulley 20T - Center - Graphite
#345838-G Low Friction Comp. Side Belt Pulley 18T o8 - Rear - Graphite
#345858-G Low Friction C. Front Belt Pulley 18T o6 - Center - Graphite
#345888-G Low Friction Comp. Side Belt Pulley 28T - Front - Graphite
#345889-G Low Friction Comp. Side Belt Pulley 29T - Front - Graphite

• Low-friction pulley set
• Specially-formulated graphite composite mixture
• Reduces friction
• Increases performance
• Increases strength
• Lightweight
• Available as set or individually

click to enlarge
(click to enlarge)

Set of molded composite pulley covers and collars made from specially-formulated graphite composite mixture for increased strength and lower weight. Perfect balance between reliability and performance.

Set includes covers for:
#345820-G Low Friction C. 2-Speed Belt Pulley 20T - Center – Graphite
#345838-G Low Friction Comp. Side Belt Pulley 18T o8 - Rear – Graphite
#345858-G Low Friction C. Front Belt Pulley 18T o6 - Center – Graphite
#345888-G Low Friction Comp. Side Belt Pulley 28T - Front – Graphite
#345889-G Low Friction Comp. Side Belt Pulley 29T - Front – Graphite

click to enlarge
(click to enlarge)

Complete set of precision-molded, low-friction composite belt pulleys + covers and collars molded from specially-formulated graphite composite mixture for increased strength and lower weight. Perfect balance between reliability and performance.

Includes the following pulleys (which are also available separately as spare parts):
#345800-G Composite Belt Pulley Cover Set - Graphite
#345820-G Low Friction C. 2-Speed Belt Pulley 20T - Center – Graphite
#345838-G Low Friction Comp. Side Belt Pulley 18T o8 - Rear – Graphite
#345858-G Low Friction C. Front Belt Pulley 18T o6 - Center – Graphite
#345888-G Low Friction Comp. Side Belt Pulley 28T - Front – Graphite
#345889-G Low Friction Comp. Side Belt Pulley 29T - Front – Graphite

click to enlarge
(click to enlarge)

Precision-molded, low-friction composite 20T belt pulley for the main layshaft, which drives the rear belt.

Molded from specially-formulated graphite composite mixture for increased strength and lower weight. Perfect balance between reliability and performance.

Cover not included; available in a complete set #345800-G Composite Belt Pulley Cover Set - Graphite.

click to enlarge
(click to enlarge)

Precision-molded, low-friction composite 18T side belt pulley for the 2-speed shaft, which drives the side belt (in the rear).

Molded from specially-formulated graphite composite mixture for increased strength and lower weight. Perfect balance between reliability and performance.

Cover not included; available in a complete set #345800-G Composite Belt Pulley Cover Set - Graphite.

click to enlarge
(click to enlarge)

Precision-molded, low-friction composite 18T front belt pulley for the inside of the middle shaft, which drives the front belt.

Molded from specially-formulated graphite composite mixture for increased strength and lower weight. Perfect balance between reliability and performance.

Cover not included; available in a complete set #345800-G Composite Belt Pulley Cover Set - Graphite.

click to enlarge
(click to enlarge)

Precision-molded, low-friction composite 28T side belt pulley for the outside of the middle shaft, which is driven by the side belt.

Molded from specially-formulated graphite composite mixture for increased strength and lower weight. Perfect balance between reliability and performance.

Cover not included; available in a complete set #345800-G Composite Belt Pulley Cover Set - Graphite.

click to enlarge
(click to enlarge)

Precision-molded, low-friction composite 29T side belt pulley on the outside of the middle shaft, which is driven by the side belt.

Molded from specially-formulated graphite composite mixture for increased strength and lower weight. Perfect balance between reliability and performance.

Cover not included; available in a complete set #345800-G Composite Belt Pulley Cover Set - Graphite.






click to enlarge
(click to enlarge)

#341109 Alu Flex Chassis 5 mm - CNC machined - Swiss 7075 T6

• New flex RX8 chassis
• More chassis flex cutouts in front, center & rear
• Suitable for all tracks but especially for low traction conditions
• Increases traction


click to enlarge
(click to enlarge)



click to enlarge
(click to enlarge)

#343476 Anti-Roll Bar Rear 2.6 mm
#343479 Anti-Roll Bar Rear 3.0 mm

• Super-fine tuning
• Ball-bearing mounting system
• Extra-smooth movement
• Quick & easy adjustment
• Laser-engraved for easy identification
• Fits RX8'23 & RX8E'23

click to enlarge
(click to enlarge)

The 2.6mm & 3.0mm rear anti-roll bar has a shape to match the updated bearing bushings. Mounting the fixed rear anti-roll bar holders without the eccentric bushing makes the down-stops easier to set.

click to enlarge
(click to enlarge)





click to enlarge
(click to enlarge)

#342483 Anti-Roll Bar Front 2.3 mm
#342485 Anti-Roll Bar Front 2.5 mm

• Super-fine tuning
• Ball-bearing mounting system
• Extra-smooth movement
• Quick & easy adjustment
• Laser-engraved for easy identification
• Fits RX8'19-'23 & RX8E'19-'23



click to enlarge
(click to enlarge)

Front wire anti-roll bar redesigned to work with the adjustable system which allows more comfortable adjustment of the bar as well as remove excessive play.

The wire anti-roll bar is used to increase steering response on small, technical tracks. The wire anti-roll bar is mounted to the bulkheads from the outside to allow quick & easy changes and adjustment. The wire roll bar turns in ball-bearings for maximum precision and freedom of movement. Anti-roll bar height can be quickly & easily adjusted via a screw ... quick & easy.


click to enlarge
(click to enlarge)

Anti-roll bar wires of different thickness are optionally available for fine-tuning. The thickness of each anti-roll bar is laser-engraved for easy identification.



click to enlarge
(click to enlarge)

#342215-G Extra Eccentric Steering Block for Aero Disc - Right - Graphite
#342225-G Exra Eccentric Steering Block for Aero Disc - Left - Graphite

• Special graphite composite mixture
• Increases Stability
• Durable
• Reliable




click to enlarge
(click to enlarge)

Lightweight yet ultra-strong front RIGHT steering block with 2 extra eccentric positions, making a total of 6 different roll center positions. Additional holes allow the mounting of graphite aerodynamic disks. Molded from specially formulated graphite composite material which ensures free suspension movement. Suitable for all traction conditions. Thanks to perfect molding, bearings perfectly fit into the steering blocks without any extra play for maximum stability and steering. Marked 'R' for easy identification.

click to enlarge
(click to enlarge)

Lightweight yet ultra-strong front LEFT steering block with 2 extra eccentric positions, making a total of 6 different roll center positions. Additional holes allow the mounting of graphite aerodynamic disks. Molded from specially formulated graphite composite material which ensures free suspension movement. Suitable for all traction conditions. Thanks to perfect molding, bearings perfectly fit into the steering blocks without any extra play for maximum stability and steering. Marked 'L' for easy identification.





click to enlarge
(click to enlarge)

#343311-G Composite Upright Rear for Aero Disc - Graphite

• Special graphite composite mixture
• Increases stability
• Durable
• Reliable
• Fits RX8 & RX8E

click to enlarge
(click to enlarge)

The rear uprights are molded from the graphite composite mixture to maintain proper suspension geometry and to provide more stability.



click to enlarge
(click to enlarge)

#342714 Alu Front Lower Suspension Holder +2mm - Black - 7075 T6 (1)
#342196 Steel Extension for Susp. Arm - Front Lower (L+R)
#342197 Graphite Extension for Susp. Arm - Front Lower (2)

• Wider front suspension holders
• Increases reactivity
• Wider +4mm
• Fits RX8'23 & RX8E'23

click to enlarge
(click to enlarge)

click to enlarge
(click to enlarge)

click to enlarge
(click to enlarge)

click to enlarge
(click to enlarge)




click to enlarge
(click to enlarge)

#342480 Anti-Roll Bar Front 2.0 mm
#342482 Anti-Roll Bar Front 2.2 mm
#342484 Anti-Roll Bar Front 2.4 mm
#342486 Anti-Roll Bar Front 2.6 mm
#342488 Anti-Roll Bar Front 2.8 mm
#343466 Anti-Roll Bar Rear 2.6 mm
#343468 Anti-Roll Bar Rear 2.8 mm
#343470 Anti-Roll Bar Rear 3.0 mm

• Super-fine tuning
• Ball-bearing mounting system
• Extra-smooth movement
• Quick & easy adjustment
• Laser-engraved for easy identification

click to enlarge
(click to enlarge)

New RX8 wire anti-roll bars redesigned to work with the adjustable system which allows more comfortable adjustment of the bar as well as remove excessive play.

The wire anti-roll bar is used to increase steering response on small, technical tracks. The wire anti-roll bar is mounted to the bulkheads from the outside to allow quick & easy changes and adjustment. The wire roll bar turns in ball-bearings for maximum precision and freedom of movement. Anti-roll bar height can be quickly & easily adjusted via a screw•quick & easy.

Anti-roll bar wires of different thickness are optionally available for fine-tuning. The thickness of each anti-roll bar is laser-engraved for easy identification.



click to enlarge
(click to enlarge)

#980320-T Titan Pin 3x20 (2)
#980322-T Titan Pin 3x22 (2)

• Titanium material
• Ultra-precise
• Super lightweight
• High durability
• Long life

click to enlarge
(click to enlarge)

Titanium pins, ultra-precision hand ground for high durability and long life. More than 40% lighter compared to standard steel pins. Set of 2.

Fits: all RX8 cars.



click to enlarge
(click to enlarge)

#345801-O Low-friction Composite Belt Pulley Set • Graphite

• Low-friction pulley set
• Specially-formulated graphite composite mixture
• Reduces friction
• Increases performance
• Increases strength
• Lightweight
• Orange color

click to enlarge
(click to enlarge)

A complete set of precision-molded, low-friction composite belt pulleys + covers, and collars made of specially-formulated graphite composite material that is a perfect balance of reliability and performance. Reduces friction and increases performance. Orange color. A •must have• for every serious racer who wants to improve efficiency of the drivetrain.


The complete set includes the following items which are also available separately as spare parts:

#345800-O Composite Belt Pulley Cover Set • Graphite
#345820-O Low Friction Composite 2-Speed Belt Pulley 20T - Center - Graphite
#345838-O Low Friction Composite Side Belt Pulley 18T o8 - Rear - Graphite
#345858-O Low Friction Composite Front Belt Pulley 18T o6 - Center - Graphite
#345888-O Low Friction Composite Side Belt Pulley 28T - Front - Graphite
#345889-O Low Friction Composite Side Belt Pulley 29T - Front - Graphite

Fits: all RX8 cars.



click to enlarge
(click to enlarge)

#342215 Extra Eccentric Steering Block for Aero Disc - Right
#342225 Extra Eccentric Steering Block for Aero Disc - Left

• 2 extra eccentric positions
• Special composite mixture
• Ultra-strong
• Perfect fit

click to enlarge
(click to enlarge)

Re-designed molded composite steering blocks with 2 extra eccentric positions, making a total of 6 different roll center positions. Additional holes allow the mounting of graphite aerodynamic disks.

The tiny yet tough steering blocks are molded from a special composite mixture for maximum strength. Thanks to perfect molding, bearings perfectly fit into the steering blocks without any extra play for maximum stability and steering. Marked for easy identification.

click to enlarge
(click to enlarge)

Fit: RX8 cars.



click to enlarge
(click to enlarge)

#348513 Alu Nickel-coated Clutchbell

• Ultra-strong construction
• more than 60% weight saving over steel clutchbell
• Premium Swiss 7075 T6 aluminum
• Nickel coating
• Extra durable
• Long life

click to enlarge
(click to enlarge)

Lightweight XCA alu clutchbell made from CNC-machined premium Swiss 7075 T6 aluminum, nickel coated. The new clutchbell has reducing rotating weight without sacrificing strength or durability. Significant weight savings over standard clutchbell: original clutchbell (9.5g), optional lightweight alu clutchbell (3.7g).

Fits: RX8'14 and latter.



click to enlarge
(click to enlarge)

#341187 Brass Chassis Weight Front 25g
#341188 Brass Chassis Weight Middle
#341189 Brass Chassis Weight Rear 25g

• Front, middle & rear weights
• Precision machined
• High-quality brass
• Easy mounting

click to enlarge
Front Weight
(click to enlarge)

Precision-machined brass chassis balancing weights. Designed for XRAY RX8 chassis with front, middle and rear weight integration holes. Front and rear weights are 25g, middle weight is approx. 19g.

Fits RX8•17 and RX8•18.

click to enlarge
Middle Weight
(click to enlarge)

click to enlarge
Rear Weight
(click to enlarge)



click to enlarge
(click to enlarge)

#345432 Low-friction Kevlar• Drive Belt Front 6.0x204mm
#345452 Low-friction Kevlar• Drive Belt Rear 8.0x204mm

• Specially modified Kevlar•-reinforced drive belt
• Reduces friction
• Increases performance

click to enlarge
(click to enlarge)

Optional specially-modified high-performance Kevlar•-reinforced drive belts. These belts are very thin and elastic as possible for an extremely effective transmission that dramatically reduces friction and increases performance.

click to enlarge
(click to enlarge)

Fits: RX8 cars.



click to enlarge
(click to enlarge)

#345990 Alu Side Belt Pulley 30T - Front - Set

• Strong
• Extra durable
• Long life
• Strategically lightened
• Pre-assembled
• Improves rear traction
• Improves steering in high speed corners

click to enlarge
(click to enlarge)

Alu 30T side belt pulley. CNC-machined from premium lightweight Swiss 7075 T6 aluminum, strategically lightened, and hardcoated for extra durability and long life. Rotating mass is reduced without sacrificing strength or durability. Factory pre-assembled.

Fits: RX8 cars.

click to enlarge
(click to enlarge)



click to enlarge
(click to enlarge)

• Optional anti-rollbars for super-fine tuning
• Special spring steel material
• Laser engraved for easy identification

#342470 Anti-Roll Bar Front 2.0mm

click to enlarge
(click to enlarge)

Front anti-roll bar manufactured from special spring steel material. The wire anti-roll bar is used to increase steering response on small, technical tracks, and is mounted to the bulkheads from the outside for quick & easy changes and adjustment. The anti-roll bar turns in ball-bearings for maximum precision and freedom of movement. Anti-roll bar height can be quickly & easily adjusted.

Anti-roll bar wires are available in different thicknesses (2.0•2.8mm) to precisely tune the handling of your car.

Fits: RX8'16 and RX8'17.



click to enlarge
(click to enlarge)

#349903 Alu RX8 Pinion Gear Tool

click to enlarge
(click to enlarge)

XCA-clutch pinion gear tool aids in installing & removing XCA clutchbell pinion gears. The tool is CNC-machined from premium Swiss 7075 T6 aluminum which ensures very high durability. Superior machining ensures very precise fitment on the pinions. Hardcoated for long life and highest durability.

Fits: RX8 cars.



click to enlarge
(click to enlarge)

#342115 Composite Susp. Arm For Wire Anti-Roll Bar - Front Lower - G
#342133 Composite Suspension Arm Front Upper - Short - Graphite
#343113 Suspension Arm for Extension - Rear Lower - Graphite
#343132 Composite Suspension Arm Rear Upper - Graphite

• Special graphite composite mixture
• Durable
• Reliable
• For high and very-high traction tracks

Suspension arms made from special composite material. The graphite composite material makes the car more stable, recommended for very high-traction conditions or hot weather.

click to enlarge
342115
(click to enlarge)

click to enlarge
342133
(click to enlarge)

click to enlarge
343113
(click to enlarge)

click to enlarge
343132
(click to enlarge)

#342115 fits RX8'16 only.
#342133, #343113 & #343132 fit all RX8 cars.



click to enlarge
(click to enlarge)

#342472 Anti-Roll Bar Front 2.2mm
#342474 Anti-Roll Bar Front 2.4mm
#342476 Anti-Roll Bar Front 2.6mm
#342478 Anti-Roll Bar Front 2.8mm

• Optional anti-rollbars for super-fine tuning
• Special spring steel material
• Laser engraved for easy identification

click to enlarge
(click to enlarge)

Front anti-roll bars manufactured from special spring steel material, the shape of the wire was re-designed to work with the new front suspension geometry and give improved action.

The wire anti-roll bar is used to increase steering response on small, technical tracks. The wire anti-roll bar is mounted to the bulkheads from the outside, for quick & easy changes and adjustment. The roll bar turns in ball-bearings for maximum precision and freedom of movement. Anti-roll bar height can be quickly & easily adjusted.

Anti-roll bar wires are available in different thicknesses (2.2•2.8mm) to precisely tune the handling of your car.

Fit: RX8'16.



click to enlarge
(click to enlarge)

#348417 XCA Alu Pinion Gear 17T (1st) - 7075 T6 - Hardcoated • Large
#348418 XCA Alu Pinion Gear 18T (1st) - 7075 T6 - Hardcoated • Large
#348419 XCA Alu Pinion Gear 19T (1st) - 7075 T6 - Hardcoated • Large
#348422 XCA Alu Pinion Gear 22T (2nd) - 7075 T6 - Hardcoated • Large
#348423 XCA Alu Pinion Gear 23T (2nd) - 7075 T6 - Hardcoated • Large
#348424 XCA Alu Pinion Gear 24T (2nd) - 7075 T6 - Hardcoated • Large
#348425 XCA Alu Pinion Gear 25T (2nd) - 7075 T6 - Hardcoated • Large

• Larger
• High strength
• Higher durability
• Longer life
• Fine etched
• Full range
• Ultra-true
• Vibration-free

click to enlarge
(click to enlarge)

High-strength pinion gears made from tough 7075 T6 alu, large and specially hardcoated for superior strength, high durability and long life. The large size allows the engine to be further away from the bulkheads to ensure all standard engines fit perfectly.

Created on a special gear machine, all pinions feature ultra-precise tooth shaping and ultra-true running for vibration-free operation. Fine internal threading allows easy installation on XCA clutchbells (standard or lightweight versions). Each pinion is fine etched with the tooth number for quick & easy identification.

click to enlarge
(click to enlarge)

Available in popular gearing sizes, allowing you to find the perfect gear ratio for any track.



click to enlarge
(click to enlarge)

#341186 Graphite Chassis Insert Front 2.5mm

• Front chassis insert
• Chassis flex adjustment
• CNC-machined
• Premium-grade graphite

click to enlarge
(click to enlarge)

CNC-machined graphite front insert for RX8 chassis to adjust chassis flex. Made from thick, CNC-machined premium-grade graphite.

click to enlarge
(click to enlarge)



click to enlarge
(click to enlarge)

#343456 Anti-Roll Bar Rear 2.6mm
#343460 Anti-Roll Bar Rear 3.0mm

• Optional anti-rollbars for super-fine tuning
• Special spring steel material
• Laser engraved for easy identification

click to enlarge
(click to enlarge)

Rear anti-roll bar manufactured from special spring steel material, black color. The wire anti-roll bar is mounted to the bulkheads from outside, for quick & easy changes and adjustment. The roll bar turns in ball-bearings for maximum precision and freedom of movement. Anti-roll bar height is adjustable via a screw• quick & easy. The thickness of each anti-roll bar is laser-engraved for easy identification.

Fit: RX8 2014.




click to enlarge
(click to enlarge)

#342462 Anti-Roll Bar Front 2.2mm
#342464 Anti-Roll Bar Front 2.4mm
#342468 Anti-Roll Bar Front 2.8mm

• Optional anti-rollbars for super-fine tuning
• Special spring steel material
• Laser engraved for easy identification

click to enlarge
(click to enlarge)

Front anti-roll bar manufactured from special spring steel material, black color. Recommended for use at smaller, more technical tracks when the car needs to quickly change direction and transfer weight. The wire anti-roll bar is mounted to the bulkheads from outside, for quick & easy changes and adjustment. The roll bar turns in ball-bearings for maximum precision and freedom of movement. Anti-roll bar height is adjustable via a screw• quick & easy. The thickness of each anti-roll bar is laser-engraved for easy identification.

Fit: RX8 2014.



click to enlarge
(click to enlarge)

#342112 Suspension Arm for Graphite Extension - Front Lower - Hard
#342132 Composite Suspension Arm Front Upper - Short - Hard
#343112 Suspension Arm for Graphite Extension - Rear Lower - Hard
#343131 Composite Suspension Arm Rear Upper - Hard

• molded from new hard material
• higher stability
• for high traction
• for high temperatures

click to enlarge
342112
(click to enlarge)

Front and rear upper/lower suspension arms made from new hard composite material, used on either left or right side. The hard composite material makes the car more stable, best when driving in high-traction conditions or in hot weather.

click to enlarge
342132
(click to enlarge)

click to enlarge
343112
(click to enlarge)

click to enlarge
343131
(click to enlarge)

Fit: RX8 cars.



click to enlarge
(click to enlarge)

#342011 Composite Lower Bulkhead Front Right - Hard
#342021 Composite Lower Bulkhead Front Left for Muffler Mount - Hard
#343011 Composite Lower Bulkhead Rear Right for Large Bearing • Hard
#343021 Composite Lower Bulkhead Rear Left - Hard

• molded from new hard material
• for high traction
• for high temperatures
• clean and lightweight design

click to enlarge
(click to enlarge)

Molded composite lower suspension bulkheads. Made from new hard material, recommended for high traction and high temperatures.

The main advantage of the composite bulkheads is that they absorb vibrations from the engine and create a natural flex, all of which help to make the RX8 one of the best handling nitro 1/8 cars.

click to enlarge
(click to enlarge)

Fits: all RX8 cars.



click to enlarge
(click to enlarge)

#345645 Graphite 2-Speed Gear 45T (2nd)
#345646 Graphite 2-Speed Gear 46T (2nd)
#345647 Graphite 2-Speed Gear 47T (2nd)
#345648 Graphite 2-Speed Gear 48T (2nd)
#345649 Graphite 2-Speed Gear 49T (2nd)
#345650 Graphite 2-Speed Gear 50T (2nd)



• all-new special graphite material
• lightweight & extra strong
• long life & minimal wear
• increases drivetrain efficiency
• ultra true and wobble-free running
• marked for easy identification

click to enlarge
(click to enlarge)

XRAY precision-molded spur gear. Molded from the all-new special lightweight and extra-strong graphite material which gives the gears an optimum balance of hardness, toughness, and flexibility to provide long life, minimal wear, and minimizing breakage or teeth stripping. The graphite gears are also lighter which results in increased drivetrain efficiency.

The spur gear was strategically lightened to reduce rotating mass. The special material will withstand even the most extreme racing conditions which impart high tension on the spur gears. A •must have• for professional racers.

The spur gears are injected in a specially-constructed mold that ensures equal material injection to ensure ultra-true and wobble-free running which makes the RX8 spur gears some of the world's most precise.

Each gear is stamped with the tooth number for easy identification. Available in all popular sizes, allowing you to find the perfect gear ratio for any track.

Fit: RX8, RX8'12, RX8'13.



click to enlarge
(click to enlarge)

#348515 XCA Alu Pinion Gear 15T

• High-strength 15T pinion gear (1st gear)
• 7075 T6 alu
• Specially hardcoated for superior strength, light weight, and high durability
• Created on a special gear machine
• Ultra-precise tooth shaping and ultra-true running for vibration-free operation
• Fine internal threading allows easy installation on XCA clutchbells (standard or lightweight versions)
• Finely etched with the tooth number for easy & quick identification
• Available in popular gearing sizes, allowing you to find the perfect gear ratio for any track

click to enlarge
(click to enlarge)

High-strength 15T pinion gear (1st gear) made from tough 7075 T6 alu and specially hardcoated for superior strength, light weight, and high durability. Created on a special gear machine, all pinions feature ultra-precise tooth shaping and ultra-true running for vibration-free operation. Fine internal threading allows easy installation on XCA clutchbells (standard or lightweight versions). Each pinion is finely etched with the tooth number for easy & quick identification. Available in popular gearing sizes, allowing you to find the perfect gear ratio for any track.



click to enlarge
(click to enlarge)

#338081 XRAY 3S Spring-Set C=3.5 (2)
#338082 XRAY 3S Spring-Set C=4.0 (2)
#338083 XRAY 3S Spring-Set C=4.5 (2)
#338084 XRAY 3S Spring-Set C=5.0 (2)
#338085 XRAY 3S Spring-Set C=5.5 (2)
#338088 XRAY 3S Spring-Set C=7.0 (2)
#338089 XRAY 3S Spring-Set C=7.5 (2)
#338090 XRAY 3S Spring-Set C=8.0 (2)

• All-new 3S springs have been specifically designed to complement the LP shocks
• Rear 3S springs are 4mm shorter than previous springs
• More in-corner steering
• Front and rear 3S springs are now the same length to simplify your tuning parts selection
• All 3S springs are manually measured, selected and matched into pairs to guarantee precisely equal length and damping characteristics.
• Different springs are optionally available

click to enlarge
(click to enlarge)

The all-new 3S springs have been specifically designed to complement the new LP shocks. Rear springs are now 4mm shorter than previous springs; front and rear springs now have the same length to simplify your tuning parts selection. The new springs give more in-corner steering.

The 3S springs, like all the other XRAY springs, are manually measured, selected and matched into pairs to guarantee precisely equal length and damping characteristics.

Fit: RX8'13.



click to enlarge
(click to enlarge)

#348541 Clutch Spring - Ultra-Stabile

• ultra-stabile
• constant during long runs
• reliable

click to enlarge
(click to enlarge)

Ultra-stabile clutch spring. Characteristics of the spring remain constant during long runs. Fits both RX8 and NT1 clutch. Must have for every racer.



click to enlarge
(click to enlarge)

click to enlarge
(click to enlarge)

#342192 Graphite Extension for Susp. Arm - Front Lower - Wider 1-Hole (L+R)

• Front lower graphite extension
• Lower, wider shock hole position
• Increased stability, less initial steering, softer damping, better cornering speed, less traction roll
• For high grip conditions

click to enlarge
(click to enlarge)

Front lower suspension arm graphite extension for use with #342111 Composite Suspension Arm. Lower and wider shock hole (compared to original) provides better stability and softe damping. Give less intial steering, improves cornering speed, and give less traction roll under high-grip conditions.

click to enlarge
(click to enlarge)

#343191 Graphite Extension for Susp. Arm - Rear middle - 1-Hole (L+R)
• Rear lower graphite extension
• Center shock position
• Increased stability, better cornering speed (compared to inner hole)
• More traction, softer damping (compared to inner hole)
• For high grip conditions