xrayxrayHome XRAY homeXRAY X-shopXRAY X-forumRCAmerica
supportsearchcontactguestbooksite map
newsproductsaboutusworldwide headlines

 

XRAY presents authentic option parts for XRAY RX8:

click to enlarge
(click to enlarge)


#349903 Alu RX8 Pinion Gear Tool

click to enlarge
(click to enlarge)


XCA-clutch pinion gear tool aids in installing & removing XCA clutchbell pinion gears. The tool is CNC-machined from premium Swiss 7075 T6 aluminum which ensures very high durability. Superior machining ensures very precise fitment on the pinions. Hardcoated for long life and highest durability.

Fits: RX8 cars.



click to enlarge
(click to enlarge)


#342115 Composite Susp. Arm For Wire Anti-Roll Bar - Front Lower - G
#342133 Composite Suspension Arm Front Upper - Short - Graphite
#343113 Suspension Arm for Extension - Rear Lower - Graphite
#343132 Composite Suspension Arm Rear Upper - Graphite

• Special graphite composite mixture
• Durable
• Reliable
• For high and very-high traction tracks

Suspension arms made from special composite material. The graphite composite material makes the car more stable, recommended for very high-traction conditions or hot weather.

click to enlarge
342115
(click to enlarge)

click to enlarge
342133
(click to enlarge)

click to enlarge
343113
(click to enlarge)

click to enlarge
343132
(click to enlarge)


#342115 fits RX8'16 only.
#342133, #343113 & #343132 fit all RX8 cars.



click to enlarge
(click to enlarge)


#342472 Anti-Roll Bar Front 2.2mm
#342474 Anti-Roll Bar Front 2.4mm
#342476 Anti-Roll Bar Front 2.6mm
#342478 Anti-Roll Bar Front 2.8mm

• Optional anti-rollbars for super-fine tuning
• Special spring steel material
• Laser engraved for easy identification

click to enlarge
(click to enlarge)


Front anti-roll bars manufactured from special spring steel material, the shape of the wire was re-designed to work with the new front suspension geometry and give improved action.

The wire anti-roll bar is used to increase steering response on small, technical tracks. The wire anti-roll bar is mounted to the bulkheads from the outside, for quick & easy changes and adjustment. The roll bar turns in ball-bearings for maximum precision and freedom of movement. Anti-roll bar height can be quickly & easily adjusted.

Anti-roll bar wires are available in different thicknesses (2.2–2.8mm) to precisely tune the handling of your car.

Fit: RX8'16.



click to enlarge
(click to enlarge)


#348417 XCA Alu Pinion Gear 17T (1st) - 7075 T6 - Hardcoated – Large
#348418 XCA Alu Pinion Gear 18T (1st) - 7075 T6 - Hardcoated – Large
#348419 XCA Alu Pinion Gear 19T (1st) - 7075 T6 - Hardcoated – Large
#348422 XCA Alu Pinion Gear 22T (2nd) - 7075 T6 - Hardcoated – Large
#348423 XCA Alu Pinion Gear 23T (2nd) - 7075 T6 - Hardcoated – Large
#348424 XCA Alu Pinion Gear 24T (2nd) - 7075 T6 - Hardcoated – Large
#348425 XCA Alu Pinion Gear 25T (2nd) - 7075 T6 - Hardcoated – Large

• Larger
• High strength
• Higher durability
• Longer life
• Fine etched
• Full range
• Ultra-true
• Vibration-free

click to enlarge
(click to enlarge)


High-strength pinion gears made from tough 7075 T6 alu, large and specially hardcoated for superior strength, high durability and long life. The large size allows the engine to be further away from the bulkheads to ensure all standard engines fit perfectly.

Created on a special gear machine, all pinions feature ultra-precise tooth shaping and ultra-true running for vibration-free operation. Fine internal threading allows easy installation on XCA clutchbells (standard or lightweight versions). Each pinion is fine etched with the tooth number for quick & easy identification.

click to enlarge
(click to enlarge)


Available in popular gearing sizes, allowing you to find the perfect gear ratio for any track.



click to enlarge
(click to enlarge)


#341186 Graphite Chassis Insert Front 2.5mm

• Front chassis insert
• Chassis flex adjustment
• CNC-machined
• Premium-grade graphite

click to enlarge
(click to enlarge)


CNC-machined graphite front insert for RX8 chassis to adjust chassis flex. Made from thick, CNC-machined premium-grade graphite.

click to enlarge
(click to enlarge)



click to enlarge
(click to enlarge)


#343456 Anti-Roll Bar Rear 2.6mm
#343460 Anti-Roll Bar Rear 3.0mm

• Optional anti-rollbars for super-fine tuning
• Special spring steel material
• Laser engraved for easy identification

click to enlarge
(click to enlarge)


Rear anti-roll bar manufactured from special spring steel material, black color. The wire anti-roll bar is mounted to the bulkheads from outside, for quick & easy changes and adjustment. The roll bar turns in ball-bearings for maximum precision and freedom of movement. Anti-roll bar height is adjustable via a screw… quick & easy. The thickness of each anti-roll bar is laser-engraved for easy identification.

Fit: RX8 2014.





click to enlarge
(click to enlarge)


#342462 Anti-Roll Bar Front 2.2mm
#342464 Anti-Roll Bar Front 2.4mm
#342468 Anti-Roll Bar Front 2.8mm

• Optional anti-rollbars for super-fine tuning
• Special spring steel material
• Laser engraved for easy identification

click to enlarge
(click to enlarge)


Front anti-roll bar manufactured from special spring steel material, black color. Recommended for use at smaller, more technical tracks when the car needs to quickly change direction and transfer weight. The wire anti-roll bar is mounted to the bulkheads from outside, for quick & easy changes and adjustment. The roll bar turns in ball-bearings for maximum precision and freedom of movement. Anti-roll bar height is adjustable via a screw… quick & easy. The thickness of each anti-roll bar is laser-engraved for easy identification.

Fit: RX8 2014.



click to enlarge
(click to enlarge)


#342112 Suspension Arm for Graphite Extension - Front Lower - Hard
#342132 Composite Suspension Arm Front Upper - Short - Hard
#343112 Suspension Arm for Graphite Extension - Rear Lower - Hard
#343131 Composite Suspension Arm Rear Upper - Hard

• molded from new hard material
• higher stability
• for high traction
• for high temperatures

click to enlarge
342112
(click to enlarge)


Front and rear upper/lower suspension arms made from new hard composite material, used on either left or right side. The hard composite material makes the car more stable, best when driving in high-traction conditions or in hot weather.

click to enlarge
342132
(click to enlarge)

click to enlarge
343112
(click to enlarge)

click to enlarge
343131
(click to enlarge)


Fit: RX8 cars.



click to enlarge
(click to enlarge)


#342011 Composite Lower Bulkhead Front Right - Hard
#342021 Composite Lower Bulkhead Front Left for Muffler Mount - Hard
#343011 Composite Lower Bulkhead Rear Right for Large Bearing – Hard
#343021 Composite Lower Bulkhead Rear Left - Hard

• molded from new hard material
• for high traction
• for high temperatures
• clean and lightweight design

click to enlarge
(click to enlarge)


Molded composite lower suspension bulkheads. Made from new hard material, recommended for high traction and high temperatures.

The main advantage of the composite bulkheads is that they absorb vibrations from the engine and create a natural flex, all of which help to make the RX8 one of the best handling nitro 1/8 cars.

click to enlarge
(click to enlarge)


Fits: all RX8 cars.



click to enlarge
(click to enlarge)


#345645 Graphite 2-Speed Gear 45T (2nd)
#345646 Graphite 2-Speed Gear 46T (2nd)
#345647 Graphite 2-Speed Gear 47T (2nd)
#345648 Graphite 2-Speed Gear 48T (2nd)
#345649 Graphite 2-Speed Gear 49T (2nd)
#345650 Graphite 2-Speed Gear 50T (2nd)



• all-new special graphite material
• lightweight & extra strong
• long life & minimal wear
• increases drivetrain efficiency
• ultra true and wobble-free running
• marked for easy identification

click to enlarge
(click to enlarge)


XRAY precision-molded spur gear. Molded from the all-new special lightweight and extra-strong graphite material which gives the gears an optimum balance of hardness, toughness, and flexibility to provide long life, minimal wear, and minimizing breakage or teeth stripping. The graphite gears are also lighter which results in increased drivetrain efficiency.

The spur gear was strategically lightened to reduce rotating mass. The special material will withstand even the most extreme racing conditions which impart high tension on the spur gears. A “must have” for professional racers.

The spur gears are injected in a specially-constructed mold that ensures equal material injection to ensure ultra-true and wobble-free running which makes the RX8 spur gears some of the world's most precise.

Each gear is stamped with the tooth number for easy identification. Available in all popular sizes, allowing you to find the perfect gear ratio for any track.


Fit: RX8, RX8'12, RX8'13.



click to enlarge
(click to enlarge)


#348515 XCA Alu Pinion Gear 15T

• High-strength 15T pinion gear (1st gear)
• 7075 T6 alu
• Specially hardcoated for superior strength, light weight, and high durability
• Created on a special gear machine
• Ultra-precise tooth shaping and ultra-true running for vibration-free operation
• Fine internal threading allows easy installation on XCA clutchbells (standard or lightweight versions)
• Finely etched with the tooth number for easy & quick identification
• Available in popular gearing sizes, allowing you to find the perfect gear ratio for any track

click to enlarge
(click to enlarge)


High-strength 15T pinion gear (1st gear) made from tough 7075 T6 alu and specially hardcoated for superior strength, light weight, and high durability. Created on a special gear machine, all pinions feature ultra-precise tooth shaping and ultra-true running for vibration-free operation. Fine internal threading allows easy installation on XCA clutchbells (standard or lightweight versions). Each pinion is finely etched with the tooth number for easy & quick identification. Available in popular gearing sizes, allowing you to find the perfect gear ratio for any track.



click to enlarge
(click to enlarge)


#338081 XRAY 3S Spring-Set C=3.5 (2)
#338082 XRAY 3S Spring-Set C=4.0 (2)
#338083 XRAY 3S Spring-Set C=4.5 (2)
#338084 XRAY 3S Spring-Set C=5.0 (2)
#338085 XRAY 3S Spring-Set C=5.5 (2)
#338088 XRAY 3S Spring-Set C=7.0 (2)
#338089 XRAY 3S Spring-Set C=7.5 (2)
#338090 XRAY 3S Spring-Set C=8.0 (2)

• All-new 3S springs have been specifically designed to complement the LP shocks
• Rear 3S springs are 4mm shorter than previous springs
• More in-corner steering
• Front and rear 3S springs are now the same length to simplify your tuning parts selection
• All 3S springs are manually measured, selected and matched into pairs to guarantee precisely equal length and damping characteristics.
• Different springs are optionally available

click to enlarge
(click to enlarge)


The all-new 3S springs have been specifically designed to complement the new LP shocks. Rear springs are now 4mm shorter than previous springs; front and rear springs now have the same length to simplify your tuning parts selection. The new springs give more in-corner steering.

The 3S springs, like all the other XRAY springs, are manually measured, selected and matched into pairs to guarantee precisely equal length and damping characteristics.

Fit: RX8'13.



click to enlarge
(click to enlarge)


#348541 Clutch Spring - Ultra-Stabile

• ultra-stabile
• constant during long runs
• reliable

click to enlarge
(click to enlarge)


Ultra-stabile clutch spring. Characteristics of the spring remain constant during long runs. Fits both RX8 and NT1 clutch. Must have for every racer.



click to enlarge
(click to enlarge)

click to enlarge
(click to enlarge)


#342192 Graphite Extension for Susp. Arm - Front Lower - Wider 1-Hole (L+R)

• Front lower graphite extension
• Lower, wider shock hole position
• Increased stability, less initial steering, softer damping, better cornering speed, less traction roll
• For high grip conditions

click to enlarge
(click to enlarge)


Front lower suspension arm graphite extension for use with #342111 Composite Suspension Arm. Lower and wider shock hole (compared to original) provides better stability and softe damping. Give less intial steering, improves cornering speed, and give less traction roll under high-grip conditions.

click to enlarge
(click to enlarge)


#343191 Graphite Extension for Susp. Arm - Rear middle - 1-Hole (L+R)
• Rear lower graphite extension
• Center shock position
• Increased stability, better cornering speed (compared to inner hole)
• More traction, softer damping (compared to inner hole)
• For high grip conditions








 
  XRAY European Vice-Championship 2016    
  Bruno Coelho & XB4 EOS Champions 2016    
  XRAY X12 Is Triple European Champion    
  X12 BRCA 1/12 UK Champion 2016    
  XRAY 3x Win & 3x TQ At ROAR Carpet Nationals, US    
  XRAY 3x Win & 4x TQ At TITC 2016    
  T4, X1 & X12 Win Snowbirds 2016 - 4x WIN & 4x TQ    
  NT1 Wins 2015 European Champion 40+ at the famous track of Lostallo in Switzerland    
  NT1 – 3x European Champions 2015    
  T4 European Champion In Modified, Stock & Junior Class    
  T4 & X1 ETS Champions 2015    
  NT1 & RX8 win 2015 ROAR Nitro On-Road Nationals    
  The largest and most powerful set-up sheet database in the world..    
 
   
  All artwork & webdesign by XRAY. All content © 1999 - 2009 by XRAY • Terms of use • Privacy & security