xrayxrayHome XRAY homeXRAY X-shopXRAY X-forumRCAmerica
supportsearchcontactguestbooksite map
newsproductsaboutusworldwide headlines

 

XRAY presents new authentic option parts for XRAY X1:

click to enlarge
(click to enlarge)


#372541 X1 Alu Lower Servo Saver Arm - Orange

• Ackerman adjustment
• Reliability
• Durability
• Ultra-strong
• Increased lifespan

click to enlarge
(click to enlarge)


Alu lower servo saver arm CNC-machined from premium Swiss 7075 T6 aluminum for superior strength and reliability. Orange color. (Color may vary slightly between products.)

New alu servo saver allows easy Ackermann adjustment.

click to enlarge
(click to enlarge)



click to enlarge
(click to enlarge)


#371007 X1 Alu Flex Chassis 2.0mm - 7075 T6

• Flex cutout openings
• Increased flex
• Increased traction
• Increased steering
• For low & medium-traction tracks
• 2mm thickness
• Black anodized

click to enlarge
(click to enlarge)


Newly-designed aluminum chassis with special cutout openings for increased flex. This chassis is recommended for and works extremely well on low-to-medium traction tracks. Not recommended for very high traction conditions where the #371005 - Alu Chassis works better. This new alu flex chassis generates more traction and improves steering. Used successfully by XRAY team at all latest races, a “must have” for every serious racer.



click to enlarge
(click to enlarge)


#371202 X1 Composite Front Wing - Black - ETS Approved
#373513-K X1 Composite Adjustable Rear Wing - Black - ETS Approved


• Adjustable downforce
• ETS approved
• Generates rear traction
• Stabilizes in chicanes

click to enlarge
(click to enlarge)


Optional front wing and rear wing with adjustable downforce approved for 2015/2016 ETS season.

The rear wing is assembled via the mounting system which features a graphite mount and aluminum stands. Using shims between the wing and the alu stands, the position of the wing can be easily adjusted for various track conditions. The height of the wing can be adjusted by changing the mounting position on the graphite plate. The rear wing has adjustable downforce by the use of an optional insertable middle wing rib.

click to enlarge
(click to enlarge)



click to enlarge
(click to enlarge)


#373587 Side Spring C=1.5 - Silver (Medium) (2)
#373588 Side Spring C=1.8 - Gold (Medium) (2)

• Straight side springs
• Improved side traction
• Improved handling
• Consistency
• Smoother compression
• Reduced traction rolling

click to enlarge
(click to enlarge)


Side springs for pan cars and formula cars. The side springs and spring caps feature a straight design (compared to the previously-used conical springs) to improve side traction and handling. The straight springs have more consistent and smoother compression which results in smoother out-of-corner exit as well as helping to prevent traction rolling. Set of 2.

click to enlarge
(click to enlarge)


Fit: XII, X12, X10 and X1 cars.



click to enlarge
(click to enlarge)


#372176 Spring 4.25 Coils 3.6x6x0.4mm, C=1.5 - Gold (Soft) (2)
#372178 Spring 4.05 Coils 3.6x6x0.45mm, C=2.5 - Black (Soft) (2)

• Matched spring set
• Additional fine-tuning
• Powder color-coded
• Quick & easy identification

click to enlarge
(click to enlarge)


Ultimate-match coil shock springs for pan cars and formula front suspension offer an additional range of choices to fine-tune your car. Powder color-coded for quick & easy identification. Set of 2.

Developed through extensive testing and racing experience. Stiffness is controlled by the thickness of the wire and the number of coils; softer springs have a lower "C" value, stiffer springs have a higher "C" value.

click to enlarge
(click to enlarge)


Fit: XII, X12, X10 and X1 cars.



click to enlarge
(click to enlarge)


#376256-O X1 Alu 1-Piece Servo Mount - Orange

• CNC machined
• Premium Swiss 7075 T6 aluminum
• Eliminates unwanted tweak
• Improves steering characteristics

click to enlarge
(click to enlarge)


Aluminum 1-piece servo mount eliminates unwanted tweak. Improves steering characteristics. CNC-machined from premium Swiss 7075 T6 aluminum. Orange color. Color may slightly vary between products.



click to enlarge
(click to enlarge)


#371004 X1 Alu Chassis 2.0mm
#371148 X1 Alu Rear Pod Lower Plate 2.0mm

• Increases traction, steering & stability in specific conditions
• Swiss 7075 T6
• 2mm thick
• Black anodized
• Laser engraved

click to enlarge
(click to enlarge)


Aluminum X1 chassis designed & developed to increase traction, stability & steering in specific conditions. The alu chassis provides a better control and makes the car easier to drive. This innovative alu chassis was extensively tested and is recommended for low, medium and high traction tracks.

Chassis is CNC-machined from 2mm thick premium Swiss 7075 T6 and is additionally black coated.

click to enlarge
(click to enlarge)



click to enlarge
(click to enlarge)


#371290 X1 Alu Body Post Plate

• Universal body mount
• Fits most popular front wings
• No need to make additional holes in body
• Easy mounting
• 4mm height

click to enlarge
(click to enlarge)


Universal front alu body post plate for X1 allows use of popular front wings with different body post mounting positions. Using this post plate, the position of the body post remains the same regardless of the front wing you use; no more cutting different post holes for different wings! The bodymount plate is 4mm high, which is the same distance as between pin holes in the body post. Therefore, when using this plate you must lower the pin by 1 hole position. CNC-machined from high-quality aluminum, anodized orange to perfectly match the X1. A “must have” for every X1 driver!



click to enlarge
(click to enlarge)


#371005 X1 Graphite Chassis 2.0mm
#371149 X1 Graphite Rear Pod Lower Plate 2.0mm

• For low traction conditions
• Generates more traction
• Increases in-corner steering
• Thinner graphite material

click to enlarge
(click to enlarge)


The new 2mm chassis and rear pod lower plate were developed to provide the best possible traction for low-traction conditions. The thinner graphite material allows the car to flex more which generates more overall traction. Countersunk holes for smooth, flat bottom.

click to enlarge
(click to enlarge)



click to enlarge
(click to enlarge)


372325 X1 Alu 1 Dot Bushing - Camber 1.5-2 (2)
#372326 X1 Alu 2 Dot Bushing - Camber 1-2.5° (2)
#372327 X1 Alu 1 Dot Bushing - Caster 6-9° (3)
#372328 X1 Alu 2 Dot Bushing - Caster 3-12° (3)

• Camber adjustment
• Caster adjustment
• Marked for easy identification
• Orange coated
• Swiss 7075 T6 aluminum

click to enlarge
(click to enlarge)


Optional alu eccentric bushings for camber and caster adjustment.

click to enlarge
(click to enlarge)



click to enlarge
(click to enlarge)


#372177 Spring 4.75 Coils 3.6x6x0.45mm, C=2.0 - Silver (Soft) (2)
#372179 Spring 4.25 Coils 3.6x6x0.5mm, C=3.0 - Grey (Soft) (2)

• Soft springs
• Powder color-coded
• Quick & easy identification

click to enlarge
(click to enlarge)


Ultimate-match coil shock springs for pancars and formula front suspension offer an additional range of choices to fine-tune your car. Powder color-coded for quick & easy identification. Set of 2.

Developed through extensive testing and racing experience. Stiffness is controlled by the thickness of the wire and the number of coils; softer springs have a lower "C" value, stiffer springs have a higher "C" value.

Fit: XII, X12, X10 and X1 cars.

click to enlarge
(click to enlarge)



click to enlarge
(click to enlarge)


#303136-O Alu Shim 3x7x1.0mm - Orange (10)
#303138-O Alu Shim 3x7x2.0mm - Orange (10)

• Alu shims
• Various thickness
• Various uses
• Orange color

click to enlarge
(click to enlarge)


Alu shims 3x7mm of various thickness which can be used for various purposes. These shims can be used for ride height and roll center adjustment, they fit perfectly under the front arm mount plate and graphite lower suspension arm stands. Orange color. Set of 10.

click to enlarge
(click to enlarge)



click to enlarge
(click to enlarge)


372087 X1 Graphite Front Arm Brace 2.5mm

• Premium graphite material
• Easier to drive
• Use in high-traction conditions

click to enlarge
(click to enlarge)


CNC-machined front arm brace made from 2.5mm premium-grade graphite material. Using the brace makes the car easier to drive under high-traction conditions.



 
  XRAY European Vice-Championship 2016    
  Bruno Coelho & XB4 EOS Champions 2016    
  XRAY X12 Is Triple European Champion    
  X12 BRCA 1/12 UK Champion 2016    
  XRAY 3x Win & 3x TQ At ROAR Carpet Nationals, US    
  XRAY 3x Win & 4x TQ At TITC 2016    
  T4, X1 & X12 Win Snowbirds 2016 - 4x WIN & 4x TQ    
  NT1 Wins 2015 European Champion 40+ at the famous track of Lostallo in Switzerland    
  NT1 – 3x European Champions 2015    
  T4 European Champion In Modified, Stock & Junior Class    
  T4 & X1 ETS Champions 2015    
  NT1 & RX8 win 2015 ROAR Nitro On-Road Nationals    
  The largest and most powerful set-up sheet database in the world..    
 
   
  All artwork & webdesign by XRAY. All content © 1999 - 2009 by XRAY • Terms of use • Privacy & security