xrayxrayHome XRAY homeXRAY X-shopXRAY X-forumRCAmerica
supportsearchcontactguestbooksite map
newsproductsaboutusworldwide headlines

 
XRAY presents new authentic option parts for XRAY XB2 & XT2 cars:

click to enlarge
(click to enlarge)

#322316 Alu Front Lower Arm Mount 0° - Swiss 7075 T6
#322317 Alu Front Lower Arm Mount +3°/-3° - Swiss 7075 T6

• Makes the car more stable
• Increases on-power steering
• Allows to increase or decrease the kick-up
• Premium SWISS 7075 T6 aluminum
• Fits: XB2, XT2, SCX

click to enlarge
(click to enlarge)


The front lower alu arm mount makes the car more stable and increases on-power steering. The mount has an integrated 0° kick-up angle. Optional weight can be added to increase the weight of arm holder. CNC-machined from high-quality Swiss 7075 T6 aluminum.

click to enlarge
(click to enlarge)

Aluminum lower arm mount has an integrated +3°/ -3° kick-up angle. Allows to increase or decrease the kick-up.
Must be used with #321211 Alu Front Lower Arm Mount +3°/-3° Kick-Up Brace - 7075 T6.




click to enlarge
(click to enlarge)

#329715 Body for 1/10 2WD Off-Road Buggy - Delta 2D – Light

• Ultra-lightweight
• High-performance
• Low profile
• Super-smooth airflow
• Increases steering
• Improves handling in jumps
• Improves rotation
• Reduces roll
• Fits XB2’24

click to enlarge
(click to enlarge)

The Delta Dirt version of the new XB2 body is designed for higher traction conditions. The Delta profile improves the stability and corner speed without rolling too much.

Ultra-lightweight version of the Delta body is produced from thinner Lexan material for reduced weight which helps to improve stability in fast corners, chicanes and helps with rotation in tight corners.








click to enlarge
(click to enlarge)

click to enlarge
(click to enlarge)

#326149 Graphite Plate For Electronics for 1-Piece Chassis - Set
#326152 Stainless Steel Weight for Electronics 1-Piece Chassis 30g
#326153 Stainless Steel Weight under Servo 1-Piece Chassis 13g

• Electronics plate for weight balance adjustment
• Steel or graphite alternative
• Frontward or rearward position
• Easy installation
• Stainless steel weights 13g & 30g
• Fits XB2 & XT2

click to enlarge
(click to enlarge)

Graphite electronics plate for weight balance adjustment. The plate can be easily installed in front ward or rearward position to adjust the weight balance. CNC-machined from premium-grade graphite material

click to enlarge
(click to enlarge)

30g stainless steel weight for placement under electronics to add weight as low as possible.
Can be easily installed in front ward or rearward position. Helps to improve the balance of the car.

click to enlarge
(click to enlarge)

13g stainless steel weight for placement under servo to add weight as low as possible.
Helps to improve the balance of the car.



click to enlarge
(click to enlarge)

#329900-H 2WD Front Wheel Aerodisk with 12mm Hex - White - Hard (10)
#329901-H 2WD/4WD Rear Wheel Aerodisk with 12mm Hex IFMAR - Hard (10)
#369902-H 4WD Front Wheel Aerodisk 12mm Hex IFMAR - White - Hard (10)
#329910-H 2WD Front Wheel Aerodisk with 12mm Hex - White - Hard (2)
#369912-H 4WD Front Wheel Aerodisk 12mm Hex IFMAR - White - Hard (2)
#329913-H 2WD/4WD Rear Wheel Aerodisk 12mm Hex IFMAR- White - Hard (2)

• Adjusts aggressivity of the car
• Increases overall steering
• Easy Ackermann position adjustment
• For all surfaces and track conditions
• Fits: XB2, XT2, SCX


click to enlarge
(click to enlarge)

The wheels are IFMAR standardized with the wheel hex offset. The wheels feature countersunk center area which allows the wheel nut to sit deeper in the wheel.

The wheels are perfect for high-competition racing. They feature internal reinforcement ribs to provide stability and resist deformation, yet they are made from a flexible material to provide durability and withstand impacts.

The side of the wheel is aerodynamic for maximum performance. The wheels were designed to provide maximum traction.

The wheels feature a 12mm internal hex.

Set of 10 (5 pair)

click to enlarge
(click to enlarge)

click to enlarge
(click to enlarge)

click to enlarge
(click to enlarge)

click to enlarge
(click to enlarge)

click to enlarge
(click to enlarge)



click to enlarge
(click to enlarge)

#322294 Graphite Extension for Steering Block - 1 Dot (2)
#322296 Graphite Extension for Steering Block - 3 Dots (2)

• Adjusts aggressivity of the car
• Increases overall steering
• Easy Ackermann position adjustment
• For all surfaces and track conditions
• Fits: XB2, XT2, SCX


click to enlarge
(click to enlarge)

1-slot extension turns outside wheels more making the car more aggressive and increasing overall steering. Steering block graphite extension works on either left or right side. Allows for easy Ackermann position adjustment for fine-tuning on all surfaces and track conditions.

click to enlarge
(click to enlarge)

3-slot extension turns outside wheels less making the car less aggressive. Steering block graphite extension works on either left or right side. Allows for easy Ackermann position adjustment for fine-tuning on all surfaces and track conditions.



click to enlarge
(click to enlarge)

#322046 Alu Front Roll-Center Holder for Bridge Upper Deck - 7075 T6

• Increases strength & reliability
• Makes the handling of the car more precise and more forgiving
• Features two-roll center positions
• Super-strong
• Premium Swiss 7075 T6 aluminum
• Fits XB2 & XT2

click to enlarge
(click to enlarge)

Alu front roll-center holder increases strength, reliability and makes the handling more precise and more forgiving.

Super-strong aluminum holder features two-roll center positions and is CNC-machined from high-quality Swiss 7075 T6 aluminum.

For this part, M3x16 screws must be used instead of kit\'s M3x14 screws.




click to enlarge
(click to enlarge)

#329717 Body for 1/10 2WD Off-Road Buggy - Delta 2C - Light

• Ultra-lightweight
• High-performance
• Low profile
• Super-smooth airflow
• Increases steering
• Improves handling in jumps
• Improves rotation
• Reduces roll
• Fits XB2’24

click to enlarge
(click to enlarge)

The Delta Carpet version of the new XB2 body is designed for higher traction conditions. The Delta profile improves the stability and corner speed without rolling too much.

Ultra-lightweight version of the Delta body is produced from thinner Lexan material for reduced weight which helps to improve stability in fast corners, chicanes and helps with rotation in tight corners.








click to enlarge
(click to enlarge)

#329913-Y 2WD/4WD Rear Wheel Aerodisk 12mm Hex IFMAR - Yellow - Hard (2)
#329910-Y 2WD Front Wheel Aerodisk with 12mm Hex - Yellow - Hard (2)
#329914-Y 2WD Front Slim Wheel Aerodisk with Narrow Offset - Yellow (2)
#369912-Y 4WD Front Wheel Aerodisk 12mm Hex IFMAR - Yellow - Hard (2)
#329901-Y 2WD/4WD Rear Wheel Aerodisk 12mm Hex IFMAR - Yellow - Hard (10)
#329900-Y 2WD Front Wheel Aerodisk with 12mm Hex - Yellow - Hard (10)
#329904-Y 2WD Front Slim Wheel Aerodisk with Narrow Offset - Yellow (10)
#369902-Y 4WD Front Wheel Aerodisk 12mm Hex IFMAR - Yellow - Hard (10)

click to enlarge
(click to enlarge)

2WD/4WD Rear Wheel Aerodisk 12mm Hex IFMAR - Yellow - Hard (2)

The wheels are IFMAR standardized with the wheel hex offset. The wheels feature countersunk center area which allows the wheel nut to sit deeper in the wheel.

The wheels are perfect for high-competition racing. They feature internal reinforcement ribs to provide stability and resist deformation.

The side of the wheel is aerodynamic for maximum performance. The wheels were designed to provide maximum traction.

The wheels feature a 12mm internal hex.

Yellow color

click to enlarge
(click to enlarge)

2WD Front Wheel Aerodisk with 12mm Hex - Yellow - Hard (2)

The wheels are IFMAR standardized with the wheel hex offset. The wheels feature countersunk center area which allows the wheel nut to sit deeper in the wheel.

The wheels are perfect for high-competition racing. They feature internal reinforcement ribs to provide stability and resist deformation.

The side of the wheel is aerodynamic for maximum performance. The wheels were designed to provide maximum traction.

The wheels feature a 12mm internal hex.

Yellow color

click to enlarge
(click to enlarge)

2WD Front Slim Wheel Aerodisk with Narrow Offset - Yellow (2)

Specially-designed 2WD front slim wheels with narrow offset that allows wider range of set-up adjustment. The slim design wheels are suggested for carpet & astro tracks.

Perfect fit, and perfect for high-competition racing. The side of the wheel is aerodynamic for maximum performance.

The inside reinforcement ribs make the wheels as stable as possible and eliminate deformation.

Yellow color

click to enlarge
(click to enlarge)

4WD Front Wheel Aerodisk 12mm Hex IFMAR - Yellow - Hard (2)

The wheels are IFMAR standardized with the wheel hex offset. The wheels feature countersunk center area which allows the wheel nut to sit deeper in the wheel.

The wheels are perfect for high-competition racing. They feature internal reinforcement ribs to provide stability and resist deformation.

The side of the wheel is aerodynamic for maximum performance. The wheels were designed to provide maximum traction.

The wheels feature a 12mm internal hex.

Yellow color




click to enlarge
(click to enlarge)

#321118 XB2'23 Alu Chassis with Bent Sides - 7075 T6 - 2.5mm - Short

• Shorter XB2 chassis design
• Improves steering reactivity
• Traditional mounting of the suspension holders
• Universal for both Dirt and Carpet edition
• 2.5 mm Swiss 7075 T6 aluminum
• Fits XB2’23

click to enlarge
(click to enlarge)

The XB2’23 chassis plate retains flex characteristics but incorporates the traditional mounting of the rear suspension holder based on customer feedback for maximum reliability. The shorter chassis improves steering reactivity.

The chassis features bent sides for proper weight balance and increased traction with maximum stability of the car. The rear part of the chassis is narrow.

CNC-machined from high-quality 2.5mm Swiss 7075 T6 aluminum, the lightweight chassis retains the necessary strength and rigidity, and is black coated at XRAY’s own in-house fully robotic coating line.

The chassis is universal for both Dirt and Carpet edition.



click to enlarge
(click to enlarge)

#368177 Front Spring Set Progressive Open L=41mm - 2 Dots (2)
#368277 Rear Spring Set Progressive Open L=55mm - 2 Dots (2)

• Open design for initially more progressive compression
• Provides maximum traction
• Allows the car to maintain maximum cornering speed

click to enlarge
(click to enlarge)

Set of front/rear progressive springs for XB2 and XB4. These springs are shorter with an open end and completely different progressive characteristics. The main advantage & benefit of progressive springs is that as the car initially enters the corner the springs work like softer springs to provide maximum traction. As the chassis begins to roll in the middle of the corner, the spring rate progressively increases until it works like a stiffer spring which allows the car to maintain maximum cornering speed.

XRAY springs, are manually measured, selected, and matched into pairs to guarantee precisely equal length and damping characteristics.

Each spring is laser-engraved with stripes to indicate the firmness, the more strips, the stiffer the spring.



click to enlarge
(click to enlarge)

#322297 Graphite Extension for Alu Steering Block 2.5mm - 1 Slot (1+1)
#322298 Graphite Extension for Alu Steering Block 2.5mm- 2 Slots (1+1)
#322299 Graphite Extension for Alu Steering Block 2.5mm- 3 Slots (1+1)

• Easy Ackermann position adjustment
• Works on all surfaces & track conditions
• Graphite extensions for alu steering blocks
• 3 different options for fine tuning
• Set of 2
• Fits XB2, XT2, SCX with alu steering blocks

click to enlarge
(click to enlarge)

Alu steering block graphite extension for left and right side. Allows for easy Ackermann position adjustment for fine-tuning on all surfaces and track conditions. 1-slot extension gives most of steering and agresevity from range of akerman plates. The outside wheel turn more than slot 2 and 3. Set of 2.

click to enlarge
(click to enlarge)

Alu steering block graphite extension for left and right side. Allows for easy Ackermann position adjustment for fine-tuning on all surfaces and track conditions. 2-slot extension turns outside wheels less, makes the car easier to drive, less aggressive and increases cornering speed. Set of 2.

click to enlarge
(click to enlarge)

Alu steering block graphite extension for left and right side. Allows for easy Ackermann position adjustment for fine-tuning on all surfaces and track conditions. 3-slot extension turns outside wheels even less than 1 and 2, makes the car easier to drive, less aggressive and increases cornering speed. Set of 2.



click to enlarge
(click to enlarge)

click to enlarge
(click to enlarge)

#320903 Alu Steering Blocks & C-hubs - Set


• Complete alu set
• Steering blocks & C-hubs
• Ultra strong
• Reduces flex
• Improves consistency
• Increases stability
• Swiss 7075 T6 aluminum
• Fits XB2, XT2, SCX

click to enlarge
(click to enlarge)

A complete set of alu steering blocks and C-hubs. Ultra-strong construction provides very long life and durability in even the most extreme racing conditions. Using the steering blocks in an aluminium material reduces flex, and improves consistency, and will free up the car, mainly for high traction conditions. The aluminum parts are more reliable and stronger.

CNC-machined from Swiss 7075 T6 aluminum and black coated.

Direct replacement for the standard composite parts. Fits all XB2, XT2 and SCX kits.



click to enlarge
(click to enlarge)

#326150 Graphite Plate For Electronics - Set
#326151 Stainless Steel Weight for Electronics 30g - Set

click to enlarge
(click to enlarge)

Graphite electronics plate for weight balance adjustment. The plate can be easily installed in front ward or rearward position to adjust the weight balance.

CNC-machined from 1.6mm premium-grade graphite material.

click to enlarge
(click to enlarge)

Specially-designed 30g stainless steel weight for placement under electronics to add weight as low as possible. Can be easily installed in front ward or rearward position. Helps to improve the balance of the car and makes the car easier to drive.



click to enlarge
(click to enlarge)

#322513 Alu Steering Arm for Double Sided Plate - Swiss 7075 T6 - Set

- 0~7mm Frontward linkage position adjustment range
- More precise steering
- Swiss 7075 T6 aluminum
- Black coated
- Fits XB2, SCX, XT2


click to enlarge
(click to enlarge)

The alu steering arms for double sided plate generate more precise steering. Features mounting position for the steering linkage for an additional steering setting possibility. CNC-machined from high-quality Swiss 7075 T6 aluminum. Set of 2.



click to enlarge
(click to enlarge)

#326201 Alu Servo Holders & Graphite Bridge

• Stiffer servo holder reduces chassis tweak
• Reinforces the front part of the car
• More reliable servo mounting
• Direct replacement for composite parts
• XB2, XT2, SCX

click to enlarge
(click to enlarge)

Alu Servo Holders & Graphite Bridge reinforces the front part of the car. Direct replacement for standard composite servo holders. Fits all XB2, XT2 and SCX.



click to enlarge
(click to enlarge)

#321250-G Composite Chassis Side Guards for Bent Sides Chassis L+R - Graphite

• Specially-formulated graphite composite mixture
• For high-traction conditions
• Improves stability
• Makes car more predictable
• Fits XB2C, XB2D, XT2C, XT2D from 2020 version onwards

click to enlarge
(click to enlarge)

Side guards made from specially-formulated graphite composite mixture, perfect for high-traction conditions. The graphite side guards makes car more stable and predictable.

Fits to all length of chassis. Fits XB2C, XB2D, XT2C, XT2D from 2020 version onwards.



click to enlarge
(click to enlarge)

#325100 XRAY XB2 Active Differential - Set

• Improves speed
• Improves handling
• Increases the forward traction
• Improves stability
• Makes the car easier to drive

click to enlarge
(click to enlarge)

Active Differential - set for XB2. The unique XRAY Active Differential is a high-performance, adjustable front gear differential for XB2 ... vastly improving the buggy's speed and handling characteristics. The special design of the internal components using different angled segments allows the diff gears to engage on-power to increase the forward traction, making it faster and easier to drive.

click to enlarge
(click to enlarge)

While the XRAY Active Differential is a performance option for serious racers who want to gain an edge on superior speed and handling, it is also of great benefit to drivers of all levels that want a more predictable and easy-to-drive car in all racing conditions.

Fits: XB2, XT2