xrayxrayHome XRAY homeXRAY X-shopXRAY X-forumRCAmerica
supportsearchcontactguestbooksite map
newsproductsaboutusworldwide headlines

 

XRAY presents new authentic option parts for XRAY XB2 car:

click to enlarge
(click to enlarge)


• High-performance pinions
• Lightweight aircraft duraluminum
• Ultra-true running
• Vibration-free operation
• Manually inspected
• Individually run-in

click to enlarge
(click to enlarge)


High-strength pinion gears made from tough 7075 T6 aluminum and specially hardcoated for superior strength, light weight, and high durability. Created on a special gear machine, all pinions feature ultra-precise tooth shaping and ultra-true running for vibration-free operation. Fine internal threading allows easy installation. Each pinion is fine etched with the tooth number for easy & quick identification.

Available in popular gearing sizes, allowing you to find the perfect gear ratio for any track.

#365726 Alu Pinion Gear – Hardcoated 26T / 48
#365726 Alu Pinion Gear – Hardcoated 27T / 48
#365726 Alu Pinion Gear – Hardcoated 28T / 48
#365726 Alu Pinion Gear – Hardcoated 29T / 48
#365726 Alu Pinion Gear – Hardcoated 30T / 48
#365726 Alu Pinion Gear – Hardcoated 31T / 48
#365726 Alu Pinion Gear – Hardcoated 32T / 48
#365726 Alu Pinion Gear – Hardcoated 33T / 48
#365726 Alu Pinion Gear – Hardcoated 34T / 48
#365726 Alu Pinion Gear – Hardcoated 353T / 48
#365726 Alu Pinion Gear – Hardcoated 36T / 48
#365726 Alu Pinion Gear – Hardcoated 37T / 48
#365726 Alu Pinion Gear – Hardcoated 38T / 48

Fit: XB4, XB2 and XT2 cars.



click to enlarge
(click to enlarge)


The XRAY XB2 graphite chassis improves the traction and is suggested especially for low to medium traction conditions. The chassis is designed and fits both Carpet and Dirt Edition and is machined from premium grade 2.5mm thick graphite material.

click to enlarge
(click to enlarge)


* 2.5mm graphite chassis
* Increases traction
* Increases strength
* For low & medium traction
* Fits Carpet & Dirt Edition

click to enlarge
(click to enlarge)

click to enlarge
(click to enlarge)



click to enlarge
(click to enlarge)


#323311 Brass Rear Lower Suspension Holder - Front - RF
#323321 Brass Rear Lower Suspension Holder - Rear – RR

• Lowered CG
• Additional weight
• Increases stability
• Improves traction
• I.S.S.
• Quick & easy geometry setting

click to enlarge
(click to enlarge)


Optional brass lower suspension holders for the rear suspension provide additional weight down low to improve traction and stability while lowering the car’s CG.

The suspension holders feature Integrated Suspension Settings™ (I.S.S.) which allows for quick & easy suspension geometry setting. This XRAY concept was first introduced in the original XB8 and has been carried over to the 1/10 scale XB2.

XB2 suspension geometry can be completely adjusted using eccentric suspension bushings inserted into suspension blocks, as well as using additional suspension shims.

click to enlarge
(click to enlarge)


Fits: XB2 cars.



click to enlarge
(click to enlarge)


#324100 Slipper Eliminator - Set

• Reduces rotating mass
• Improves power transfer
• Eliminates power loss
• Direct motor performance transfer
• Eliminates need for clutch & slipper adjustment
• Easy spur gear exchange
• Recommended for stock motors

click to enlarge
(click to enlarge)


XRAY XB2 Slipper Eliminator is a direct replacement for the slipper clutch set. Designed and recommended for use with stock motors to reduce rotating mass, reduce weight, and improve power transfer from motor without any power loss. With the Slipper Eliminator, motor performance is transferred directly to the car, and there is also no need for clutch & slipper adjustment. Exchanging the spur gear is then extremely very quick & easy.

Set includes aluminum slipper shaft, aluminum spur gear hub, and 69T spur gear (an optional 72T spur gear is available).



click to enlarge
(click to enlarge)


#328011 Composite Shock Ball Joint 21mm (2)

• Longer ball joint
• Greater suspension downtravel
• For front & rear shocks
• 2 pcs in set

click to enlarge
(click to enlarge)


Molded composite shock ball joint, length 21mm. These ball joints are +4mm longer than standard ball joints, allowing greater suspension downtravel. Fits front & rear shock absorbers. Set of 2.


Fits XB4 and XB2 cars



click to enlarge
(click to enlarge)


#322570 Alu Steering Plate - Swiss 7075 T6

• Increases Steering
• More precise steering
• More aggressive steering
• Increases stregth

click to enlarge
(click to enlarge)


Alu steering plate CNC-machined from premium Swiss 7075 T6 aluminum. Easily-adjusted Ackermann via steering link mounting positions on the steering plate. The alu steering plate generates more steering, more precise steering, and more aggressive steering.

Fits: XB2 cars.



click to enlarge
(click to enlarge)


#323042-H Composite Rear Roll-Center Holder - Dirt Edition - Hard
#323042-M Composite Rear Roll-Center Holder - Dirt Edition - Medium

• Traction adjustment
• For different track conditions
• Various hardness available

click to enlarge
(click to enlarge)


Molded composite rear roll-center holders for DIRT EDITION made from premium composite material in various hardness for different track conditions.

Medium: suitable for very-low to low-medium traction tracks
Hard: suitable for low-medium to medium-high traction tracks

Fits: XB2 Dirt Edition.



click to enlarge
(click to enlarge)


#321260-M Composite Chassis Side Guards L+R - Medium
#321260-H Composite Chassis Side Guards L+R - Hard

• Chassis flex adjustment
• Various hardness available
• For different track conditions

click to enlarge
(click to enlarge)


Side guards are an integral part of the XB2 Multi-Flex™ system. Molded from premium composite material, the side guards allow for proper chassis flex. Various hardness available for different track conditions.

Fits: XB2 cars.



click to enlarge
(click to enlarge)


#323012 Composite Mid Motor Gear Box (4 Gears) Set

• Accommodates 4 gears
• Motor orientation on LEFT side
• Super-easy access to rear diff
• Ultra durable

click to enlarge
(click to enlarge)


Optional molded composite motor gear box made from premium composite material accommodates 4 gears and orientates the motor on the LEFT side. All parts fit perfectly together, and give super-easy access to the rear differential. The durable gear box houses the differential and rear transmission, allowing the mounting of the rear roll center holder, motor plate, and rear shock tower.

Fit: XB2 Dirt Edition.



click to enlarge
(click to enlarge)


#365359 Alu Wheel Hub 12mm - Offset "+3.75mm" (2))

• Optional 12mm wheel hubs
• Precision track-width change
• Swiss 7075 T6 aluminum
• Lightweight design
• Additionally drilled
• Black coated
• Marked for easy identification

click to enlarge
(click to enlarge)


CNC-machined 12mm wheel hubs with +3.75mm offset for wider track-width, made from Swiss 7075 T6. Strategically machined for optimum strength, balance, and lightness. Marked for easy identification. Secured on drive axle by setscrew. Set of 2.

Fits: XB4 and XB2 cars.



click to enlarge
(click to enlarge)


#326112-M Composite Battery Strap - Medium - Dirt Edition
#326112-H Composite Battery Strap - Hard - Dirt Edition

• Special composite mixture
• Different hardness available
• Flex adjustment
• Fits dirt edition only

click to enlarge
(click to enlarge)


Battery straps made from special composite material. For use with Dirt Edition. Different hardness available for various track conditions.

Standard (Medium): Recommended for very-low to low-medium traction tracks
Option (Hard): Recommended for low-medium to medium-high traction tracks

Fits: XB2 Dirt Edition.



click to enlarge
(click to enlarge)


#329701 Body for 1/10 2WD Off-Road Buggy 0.5mm - Lightweight

• Light weight
• Decreases roll
• Increases cornering speed
• More aggressive handling

click to enlarge
(click to enlarge)


High-performance, low-profile aerodynamic body for XB2 designed by XRAY to perfectly fit the car. Used by the Factory Team in medium to high-traction conditions. The lightweight body ensures that the car has less weight atop the car for less roll, increased cornering speed, and more aggressive handling.

Fits: XB2 cars.



click to enlarge
(click to enlarge)


#322081-H Composite Shock Tower Front – Hard
#323081-H Composite Shock Tower Rear – Hard
#322081-M Composite Shock Tower Front – Medium
#323081-M Composite Shock Tower Rear – Medium

• Tough molded composite
• Various stiffness
• Increases traction
• Multiple shock positions

click to enlarge
(click to enlarge)


Shock towers molded from premium, tough composite material. Generate more traction compared to graphite shock towers. Multiple shock positions. Molded from composite material of various hardness for different track conditions.

click to enlarge
(click to enlarge)


Fit: XB2 Dirt Edition.



click to enlarge
(click to enlarge)


#326180 Stainless Steel Battery Weight 50g

• Stainless steel material
• 50g weight
• Lower CG
• Improves landing
• Easier to drive
• More forgiving handling
• Inserted under battery directly on chassis

click to enlarge
(click to enlarge)


Specially-designed 50g stainless steel weight for placement beneath battery directly on chassis to add weight as low as possible. Makes the car easier to drive, improves landing, and makes the care more “forgiving.” A must-have option part.

Fits: XB2 Carpet & XB2 Dirt.



click to enlarge
(click to enlarge)


329900 2WD Front Wheel Aerodisk with 12mm Hex - White (10)
369903 4WD/2WD Rear Wheel Aerodisk with 12mm Hex - White (10)
369902 4WD Front Wheel Aerodisk with 12mm Hex - White (10)


• Specially-designed 1/10 off-road wheels
• Excellent for high-competition racing
• Flexible, durable material withstands impacts
• 12mm internal hex
• Perfect fit
• Value Pack

click to enlarge
(click to enlarge)


Specially-designed XB4/XB2 wheels with 12mm internal hex. Perfect fit, recommended for high-competition racing. Made from very flexible yet durable material to withstand impacts. The side of the wheel is aerodynamic for maximum performance.

click to enlarge
(click to enlarge)


Special features of the wheel are visible from the inside: reinforcement ribs to make the wheels as stable as possible and eliminate deformation.

Set of 5 pairs (10 pcs) for the price of 4 pairs. A great value pack.

#329900 fit XB2 cars.
#369902 fit XB4 cars.
#369903 fit XB2 and XB4 cars.



click to enlarge
(click to enlarge)


#322312 Brass 46g Front Lower Arm Mount 26° Kick-Up
#322314 Brass 46g Front Lower Arm Mount 23°/29° Kick-Up

• Optional front lower arm mounts
• Integrated kick-up
• Fine set-up adjustment
• Add weight

click to enlarge
(click to enlarge)


Optional brass front lower arm mounts with different kick-up angles integrated. Brass lower arm mounts add more weight in front which results in less weight transfer and increased on-power steering compared to standard composite front lower arm mount.

click to enlarge
(click to enlarge)


Optional mount #302314 with integrated 23°/29° kick-up angle must be used together with #321211 Alu Front Lower Arm Mount 23°/29° Kick-Up Brace - 7075 T6.

click to enlarge
(click to enlarge)


Fits: XB2 Carpet & XB2 Dirt.



click to enlarge
(click to enlarge)


#322310 Alu Front Lower Arm Mount 26° Kick-Up - Swiss 7075 T6
#322313 Alu Front Lower Arm Mount 23°/29° Kick-Up - Swiss 7075 T6
#322311 Composite Front Lower Arm Mount 26° Kick-Up - standard

• Optional front lower arm mounts
• Swiss 7075 T6
• Integrated kick-up
• Fine set-up adjustment

click to enlarge
(click to enlarge)


Optional alu front lower arm mounts with different kick-up angles integrated. Alu front lower arm mounts make the car more stable and increase on-power steering compared to standard composite front lower arm mount.

click to enlarge
(click to enlarge)

click to enlarge
(click to enlarge)


Optional mount #322313 with integrated 23°/29° kick-up angle must be used together with #321211 Alu Front Lower Arm Mount 23°/29° Kick-Up Brace - 7075 T6.

Fits: XB2 Carpet & XB2 Dirt.



click to enlarge
(click to enlarge)


#325000 Ball Adjustable Differential - Set - HUDY Spring Steel™

• For very-low to medium traction tracks
• Increases traction
• Externally adjustable
• HUDY Spring Steel™
• Additionally hardened
• Extra durable
• Long lifespan
• Ultra-smooth operation
• Factory pre-assembled

click to enlarge
(click to enlarge)


The XB2 ball differential is recommended for all XB2 configurations when used on very-low to medium-traction dirt or clay surfaces to increase traction. The externally-adjustable ball differential is machined from HUDY Spring Steel™ and is additionally hardened for extra durability and long lifespan. A high-quality carbide thrustbearing and carbide balls are included for ultra-smooth operation. The ball differential comes factory pre-assembled.

click to enlarge
(click to enlarge)


Fits: XB2 Carpet & XB2 Dirt.



click to enlarge
(click to enlarge)


#322291 Graphite Extension for Steering Block 2.5mm - 1 Slot (2)
#322292 Graphite Extension for Steering Block 2.5mm - 0 Slots (2)
#322290 Graphite Extension for Steering Block 2.5mm - 2 Slots (2) - standard

• Steering block graphite extensions
• L or R sides
• Easy Ackermann adjustment
• Works on all surfaces and track condi

 
  T4 & X1win At International Indoor Championship In US    
  XB4 European Vice-Champion & Junior Champion 2016 In 1/10 4WD Electric Buggy    
  XRAY European Vice-Championship 2016    
  Bruno Coelho & XB4 EOS Champions 2016    
  XRAY X12 Is Triple European Champion    
  X12 BRCA 1/12 UK Champion 2016    
  XRAY 3x Win & 3x TQ At ROAR Carpet Nationals, US    
  XRAY 3x Win & 4x TQ At TITC 2016    
  T4, X1 & X12 Win Snowbirds 2016 - 4x WIN & 4x TQ    
  The largest and most powerful set-up sheet database in the world..    
 
   
  All artwork & webdesign by XRAY. All content © 1999 - 2009 by XRAY • Terms of use • Privacy & security