|
|
| XRAY presents new authentic option parts for XRAY XB2 & XT2 cars: |
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
|
The XB2’23 chassis plate retains flex characteristics but incorporates the traditional mounting of the rear suspension holder based on customer feedback for maximum reliability. The shorter chassis improves steering reactivity.
The chassis features bent sides for proper weight balance and increased traction with maximum stability of the car. The rear part of the chassis is narrow.
CNC-machined from high-quality 2.5mm Swiss 7075 T6 aluminum, the lightweight chassis retains the necessary strength and rigidity, and is black coated at XRAY’s own in-house fully robotic coating line.
The chassis is universal for both Dirt and Carpet edition. |
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
|
Set of front/rear progressive springs for XB2 and XB4. These springs are shorter with an open end and completely different progressive characteristics. The main advantage & benefit of progressive springs is that as the car initially enters the corner the springs work like softer springs to provide maximum traction. As the chassis begins to roll in the middle of the corner, the spring rate progressively increases until it works like a stiffer spring which allows the car to maintain maximum cornering speed.
XRAY springs, are manually measured, selected, and matched into pairs to guarantee precisely equal length and damping characteristics.
Each spring is laser-engraved with stripes to indicate the firmness, the more strips, the stiffer the spring. |
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
|
| Alu steering block graphite extension for left and right side. Allows for easy Ackermann position adjustment for fine-tuning on all surfaces and track conditions. 1-slot extension gives most of steering and agresevity from range of akerman plates. The outside wheel turn more than slot 2 and 3. Set of 2. |
|
(click to enlarge) |
|
|
|
| Alu steering block graphite extension for left and right side. Allows for easy Ackermann position adjustment for fine-tuning on all surfaces and track conditions. 2-slot extension turns outside wheels less, makes the car easier to drive, less aggressive and increases cornering speed. Set of 2. |
|
(click to enlarge) |
|
|
|
Alu steering block graphite extension for left and right side. Allows for easy Ackermann position adjustment for fine-tuning on all surfaces and track conditions. 3-slot extension turns outside wheels even less than 1 and 2, makes the car easier to drive, less aggressive and increases cornering speed. Set of 2.
|
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
|
A complete set of alu steering blocks and C-hubs. Ultra-strong construction provides very long life and durability in even the most extreme racing conditions. Using the steering blocks in an aluminium material reduces flex, and improves consistency, and will free up the car, mainly for high traction conditions. The aluminum parts are more reliable and stronger.
CNC-machined from Swiss 7075 T6 aluminum and black coated.
Direct replacement for the standard composite parts. Fits all XB2, XT2 and SCX kits.
|
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
|
Graphite electronics plate for weight balance adjustment. The plate can be easily installed in front ward or rearward position to adjust the weight balance.
CNC-machined from 1.6mm premium-grade graphite material.
|
|
(click to enlarge) |
|
|
|
| Specially-designed 30g stainless steel weight for placement under electronics to add weight as low as possible. Can be easily installed in front ward or rearward position. Helps to improve the balance of the car and makes the car easier to drive. |
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
|
| The alu steering arms for double sided plate generate more precise steering. Features mounting position for the steering linkage for an additional steering setting possibility. CNC-machined from high-quality Swiss 7075 T6 aluminum. Set of 2. |
|
(click to enlarge) |
|
|
|
#326201 Alu Servo Holders & Graphite Bridge
• Stiffer servo holder reduces chassis tweak
• Reinforces the front part of the car
• More reliable servo mounting
• Direct replacement for composite parts
• XB2, XT2, SCX
|
|
(click to enlarge) |
|
|
|
| Alu Servo Holders & Graphite Bridge reinforces the front part of the car. Direct replacement for standard composite servo holders. Fits all XB2, XT2 and SCX. |
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
|
Side guards made from specially-formulated graphite composite mixture, perfect for high-traction conditions. The graphite side guards makes car more stable and predictable.
Fits to all length of chassis. Fits XB2C, XB2D, XT2C, XT2D from 2020 version onwards.
|
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
|
| Active Differential - set for XB2. The unique XRAY Active Differential is a high-performance, adjustable front gear differential for XB2 ... vastly improving the buggy's speed and handling characteristics. The special design of the internal components using different angled segments allows the diff gears to engage on-power to increase the forward traction, making it faster and easier to drive. |
|
(click to enlarge) |
|
|
|
While the XRAY Active Differential is a performance option for serious racers who want to gain an edge on superior speed and handling, it is also of great benefit to drivers of all levels that want a more predictable and easy-to-drive car in all racing conditions.
Fits: XB2, XT2
|
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
|
Composite steering arm with steering mount hole is a part of Fully Adaptive Steering System allows easy changes to the steering assembly that transform the geometry and alter the handling characteristics.
For low traction conditions - steering link mounted directly on steering plate
For high traction conditions - steering link mount on left steering arm
Made from strong premium-grade graphite material for incredible strength and long lifespan.
|
|
(click to enlarge) |
|
|
|
Composite steering plate is a part of Fully Adaptive Steering System allows easy changes to the steering assembly that transform the geometry and alter the handling characteristics.
For low traction conditions - steering link mounted directly on steering plate
For high traction conditions â€✠steering link mount on left steering arm
Made from strong premium-grade graphite material for incredible strength and long lifespan.
Fits XB2 & XT2 & SCX |
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
|
Ultra-lightweight version of the XB2 Gamma 2C body is designed especially for high traction conditions. The profile of the body improves stability in fast corners, chicanes and helps with rotation in tight corners.
The high-performance, low-profile aerodynamic body for XB2C is designed by XRAY to perfectly fit the car and work in most track conditions especially for higher grip tracks. More down force have was added to the middle to increase rotation in slow corners. Less down force in rear and front give more corners speed without diving too much. Made from high-quality premium Lexan material.
Fits XB2
#329713 Body for 1/10 2WD Off-Road Buggy - Gamma 2C - Light |
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
|
Ultra-lightweight version of the XB2 Gamma 2D body is designed especially for low traction conditions. Lower weight reduces the roll of the car and improves corner speed. The profile of the body improves the stability and increases downforce towards the rear of the car to help generate more traction for the car.
The high-performance, low-profile aerodynamic body for XB2D is designed by XRAY to perfectly fit the car and work especially in low traction conditions. Specially designed to maximize rear down force to increase traction. Front was designed to give optimal steering. The sides of the body and cockpit are as flat as possible to allow air to flow around the body for improved side stability. On the top of roof are two integrated flow channels for proper airflow. Made from high-quality premium Lexan material.
Fits XB2
#329711 Body for 1/10 2WD Off-Road Buggy - Gamma 2D - Light |
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
|
Solid axle set includes lightweight axle shaft with 20T pulley, disc carrier, spur gear and hardware. Axle body is manufactured from alu SWISS Alu 7075 T6 Hard Coated material and has been strategically machined lighter than standard solid axle shaft. Especially hand-ground for maximum precision and smooth operation, additionally heat treated and black coated to ensure long life and maximum performance.
Designed for stock class to reduce maximum rotation mass and eliminate slipper effect.
Super lightweight adapter to eliminate extra weight.
Fits: XB2'20-21, XT2'21 |
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
|
Alu front roll-center holder with wider design and roll center positions moved more outside increases strength, reliability and makes the handling more precise and more forgiving. Allows to use front anti-roll bar. Super-strong aluminum holder features three-roll center positions and is CNC-machined from high-quality Swiss 7075 T6 aluminum.
Fits XB2 & XT2
|
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
|
Molded composite motor gear box made from specially-formulated graphite composite material to fit REAR and FRONT motor position of XB2. The graphite molded gear box is lighter and stronger.
|
|
(click to enlarge) |
|
|
|
All parts fit perfectly together, and the super-easy access to the rear differential will be appreciated by every racer. The durable gear box houses the differential and rear transmission, allows the mounting of the rear roll center holder, motor plate, and rear shock tower.
|
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
|
Steering block graphite extension, works on either left or right side. Allows for easy Ackermann position adjustment for fine-tuning on all surfaces and track conditions. 3-slot plate has increased steering angle which increases steering in slow corners. Set of 2.
Fits all XB2 & XT2 |
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
|
Set of lower aluminum shock collars for increased reliability. Allow to decrease the ride height for lower CG. Stylish and lightweight collars are CNC-machined from premium Swiss 7075 T6 aluminum and are strategically lightened. Set of four. Black color.
Fits all XB2, XB4, XT2 & XT4
|
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
|
Molded composite motor gear box made from specially-formulated graphite composite material to fit REAR and FRONT motor position of XB2. The graphite molded gear box is lighter and stronger.
All parts fit perfectly together, and the super-easy access to the rear differential will be appreciated by every racer. The durable gear box houses the differential and rear transmission, allows the mounting of the rear roll center holder, motor plate, and rear shock tower.
Fits only XB2•20
|
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
|
Gear differential cover for LCG Differential made from specially-formulated graphite composite mixture for increased strength and lower weight. Perfect balance between reliability and performance.
Fits: XB2•20
|
|
(click to enlarge) |
|
|
|
Gear differential case with 53T pulley for LCG Differential made from specially-formulated graphite composite mixture for increased strength and lower weight. Perfect balance between reliability and performance.
Fits: All XB2
|
|
