xrayxrayHome XRAY homeXRAY X-shopXRAY X-forumRCAmerica
supportsearchcontactguestbooksite map
newsproductsaboutusworldwide headlines

 
XRAY presents new authentic option parts for XRAY XB2 car:

click to enlarge
(click to enlarge)

#323044-G Composite Rear Roll-Center Holder for Anti-Roll Bar - Graphite

click to enlarge
(click to enlarge)

Molded rear roll-center holder made from GRAPHITE composite material. Roll center holder is redesigned to fit the LCG gear box and features updated roll center positions. The roll center holder also serves as the rear anti-roll bar mount.

Universal for both Dirt and Carpet edition.

Fits only XB2'20



click to enlarge
(click to enlarge)

322293 Graphite Extension for Steering Block 2.5mm - 3 Slots (2)

• Steering block extensions
• 3 slots alternative
• Easy Ackermann position adjustment
• Increases steering angle
• Better in hearpin corners
• Machined from premium 2.5mm graphite
• Fits left and right side
• 2 pcs in a set

click to enlarge
(click to enlarge)

Steering block graphite extension, works on either left or right side. Allows for easy Ackermann position adjustment for fine-tuning on all surfaces and track conditions. 3-slot plate has increased steering angle which increases steering in slow corners. Set of 2.

Fits all XB2 & XT2




click to enlarge
(click to enlarge)

368022 Alu Shock Spring Retaining Collar -2mm (4)

• Lower shock collars by 2mm
• Allows to decrease ride height
• Lower CG of the car
• Strategically lightened
• SWISS 7075 T6 aluminum
• Set of 4pcs

click to enlarge
(click to enlarge)

Set of lower aluminum shock collars for increased reliability. Allow to decrease the ride height for lower CG. Stylish and lightweight collars are CNC-machined from premium Swiss 7075 T6 aluminum and are strategically lightened. Set of four. Black color.

Fits all XB2, XB4, XT2 & XT4


click to enlarge
(click to enlarge)

#323018-G Composite Rear Motor Gear Box - LCG - Graphite - Set

#323019-G Composite Front Motor Gear Box - LCG - Graphite - Set

• Special graphite composite mixture
• Higher temperature resistance
• LCG Design
• Lightweight
• More durable
• Higher wear resistance

click to enlarge
(click to enlarge)

click to enlarge
(click to enlarge)

Molded composite motor gear box made from specially-formulated graphite composite material to fit REAR and FRONT motor position of XB2. The graphite molded gear box is lighter and stronger.

All parts fit perfectly together, and the super-easy access to the rear differential will be appreciated by every racer. The durable gear box houses the differential and rear transmission, allows the mounting of the rear roll center holder, motor plate, and rear shock tower.

Fits only XB2’20





click to enlarge
(click to enlarge)

#324911-G Composite Gear Differential Cover - LCG – Graphite

#324954-G Composite Gear Diff. Case with Pulley 53T - LCG - Graphite

• Special graphite composite mixture
• LCG Design
• Lightweight
• More durable
• Higher temperature resistance
• Higher wear resistance

click to enlarge
(click to enlarge)

Gear differential cover for LCG Differential made from specially-formulated graphite composite mixture for increased strength and lower weight. Perfect balance between reliability and performance.

Fits: XB2’20

click to enlarge
(click to enlarge)

Gear differential case with 53T pulley for LCG Differential made from specially-formulated graphite composite mixture for increased strength and lower weight. Perfect balance between reliability and performance.

Fits: All XB2


#329910-M 2WD Front Wheel Aerodisk with 12mm Hex IFMAR - White (2)

#329900-M 2WD Front Wheel Aerodisk with 12mm Hex IFMAR - White (10)

• IFMAR legal size
• Specially designed wheels
• Excellent for high competition racing
• Flexible
• Reinforced
• Durable material to withstand impacts
• Perfect fit

click to enlarge
(click to enlarge)

click to enlarge
(click to enlarge)

IFMAR legal size, specially-designed 2WD front wheels with 12mm internal hex. Perfect fit, recommended for high-competition racing. Made from very flexible yet durable material to withstand impacts. The side of the wheel is aerodynamic for maximum performance. Medium hardness.

Special features of the wheel are visible from the inside: reinforcement ribs to make the wheels as stable as possible and eliminate deformation.

Set of 5 pairs (10 pcs) for the price of 4 pairs. A great value pack.

Fits all XB2



click to enlarge
(click to enlarge)

#322086 XB2\'20 LCG Alu Shock Tower Front 3.0mm - Swiss 7075 T6
#323088 XB2\'20 LCG Alu Shock Tower Rear 3.0mm - Swiss 7075 T6(2.5mm)

• Premium SWISS 7075 T6
• Updated shock positions
• Multiple wing mounting positions on rear
• Compatible with LCG gear boxes

click to enlarge
(click to enlarge)

click to enlarge
(click to enlarge)

CNC-machined alu rear shock tower from 3mm thick premium Swiss 7075 T6 aluminum. Features updated shock positions and three different wing mounting positions. The rear tower is compatible with both front and rear motor LCG gearboxes, reducing the number of parts needed to change between configurations.

The shock tower is universal for both Dirt and Carpet edition.

Fits: All XB2



click to enlarge
(click to enlarge)

#321108 XB2 Alu Chassis with Bent Sides - Long - 7075 T6 (2.5mm)

• Bent sides for improved weight balance
• High-quality 2.5mm SWISS 7075 T6 aluminum
• Strong & Rigid
• Black coated
• Increases traction
• For low traction and bumpy astro turf track

click to enlarge
(click to enlarge)

CNC-machined from high-quality 2.5mm Swiss 7075 T6 aluminum, the lightweight chassis retains the necessary strength and rigidity, and is black coated at XRAY’s own in-house fully robotic coating line. Features bent sides for improved weight balance and increased traction with maximum stability of the car. The rear part of the chassis is narrower.

Long chassis increases traction. Recommended for low traction and bumpy Astro Turf tracks.

Universal for both Dirt and Carpet edition.

There are three different lengths of chassis available each suitable for particular track conditions.

Fits: XB2’20

#321109 XB2 Alu Chassis with Bent Sides - Short - 7075 T6 (2.5mm)

• Bent sides for improved weight balance
• High-quality 2.5mm SWISS 7075 T6 aluminum
• Strong & Rigid
• Black coated
• Increases rotation
• Makes car more reactive
• For carpet tracks

click to enlarge
(click to enlarge)

CNC-machined from high-quality 2.5mm Swiss 7075 T6 aluminum, the lightweight chassis retains the necessary strength and rigidity, and is black coated at XRAY’s own in-house fully robotic coating line. Features bent sides for improved weight balance and increased traction with maximum stability of the car. The rear part of the chassis is narrower.
Short chassis increases rotation in corners and makes the car more reactive. Recommended especially for carpet tracks.

Universal for both Dirt and Carpet edition.

There are three different lengths of chassis available each suitable for particular track conditions.

Fits: XB2’20



click to enlarge
(click to enlarge)

#323400 XB2 Anti-Roll Bar Rear 1.0mm Set

• Complete anti-roll bar set
• Includes 1mm anti-roll bar wire
• Special spring steel material
• Stabilizes rear of the car
• Quickly adjustable
• Easy assembly
• Various anti-roll bar wires available




click to enlarge
(click to enlarge)

Rear anti-roll bar set 1.0mm for XB2 made from special spring steel material. Stabilizes rear of the car. Roll bars are easily mounted to the gearbox and can be adjusted with linkages.

The thickness of each anti-roll bar is laser-engraved for easy identification. Anti-roll bar wires of different thickness are optionally available for fine-tuning.

Fits XB2’20, XB2’19, XB2’18, XB2’17, XB2’16


click to enlarge
(click to enlarge)

#323043 Alu Rear Roll-Center Holder for Anti-Roll Bar - 7075 T6


• Alu rear roll-center holder
• Stronger
• Multiple positions for fine roll-center adjustment
• Premium SWISS 7075 T6


click to enlarge
(click to enlarge)

Optional alu rear roll-center holder CNC-machined from premium Swiss 7075 T6 aluminum. Features 3 positions for fine roll-center adjustments.





click to enlarge
(click to enlarge)

#322042 Alu Front Roll-Center Holder for Anti-Roll Bar


• Increases strength
• More precise handling
• More forgiving handling
• Multiple roll center positions
• Allows to use front anti-roll bar
• SWISS 7075 T6 Aluminum


click to enlarge
(click to enlarge)

Optional front roll-center holder CNC-machined from high-quality 2mm Swiss 7075 T6 aluminum. Alu holder increases strength and makes the handling more precise and more forgiving. Allows to use front anti-roll bar.

Fits XB2’20, XB2’19, XB2’18, XB2’17, XB2’16, XT2’19, XT2’18, XT2’17


click to enlarge
(click to enlarge)

#322512 Alu Steering Arms – Swiss 7075 T6 - Set
#322572 Alu Steering Plate Rearward Linkage Mounting - Swiss 7075 T6 – V2

• More precise steering
• Extra steering linkage position
• Swiss 7075 T6 aluminum
• Black coated
• Set of 2

The alu steering arms generate more precise steering. Features mounting position for the steering linkage for an additional steering setting possibility. CNC-machined steering arms made from high-quality Swiss 7075 T6 aluminum. Set of 2.



click to enlarge
(click to enlarge)

• Rearwards steering linkage mounting
• More precise steering
• Makes car more predictable
• Smoother feeling
• Greater range of Ackermann settings
• Swiss 7075 T6 aluminum
• Black coated

Alu steering plate for rearward linkage mounting allows mounting the steering linkages more rearwards which makes the steering more precise and makes the car more predictable and results in smoother feeling. The design of the plate allows for a greater range of Ackermann settings comparing to the standard steering plate. CNC-machined from premium Swiss 7075 T6 aluminum.



click to enlarge
(click to enlarge)


click to enlarge
(click to enlarge)

#322086 XB2 Alu Front Shock Tower 3.0mm - Swiss 7075 T6
#323086 Alu Shock Tower Rear 3.0mm - Swiss 7075 T6

• Ultra-rigid design
• Long lifespan
• Multiple shock position
• Black coated
• Laser engraved
• Premium Swiss 7075 T6 aluminum

click to enlarge
(click to enlarge)

CNC-machined alu front shock tower from 3mm thick premium Swiss 7075 T6 aluminum. Ultra-rigid design for unsurpassed strength and long lifespan. Include new extra positions for shocks and wing. Black coated. Laser-engraved with the XRAY logo.

click to enlarge
(click to enlarge)

Fit: XB2C\'16, XB2D\'16, XB2C\'17, XB2D\'17, XB2C\'18 & XB2C\'19.


click to enlarge
(click to enlarge)

#326182 Stainless Steel Weight 17g – Front
#326183 Stainless Steel Weight 17g - Front-Middle
#326184 Stainless Steel Weight 7g - Middle

• Small size
• Clean layout
• Results in lower CG
• Quick & easy install
• Stainless steel
• Marked for easy identification

click to enlarge
(click to enlarge)

Optional stainless steel weights for front, front-middle and middle of the XB2 cars. Small & easy to install chassis weight with clean layout made from stainless steel. Quick & easy attachment to chassis. Marked with weight value for easy identification.

click to enlarge
(click to enlarge)

click to enlarge
(click to enlarge)

Fits: XB2 cars.


click to enlarge
(click to enlarge)

#326170 XB2 Alu + Graphite Fully Adjustable Battery Holder

• Fully adjustable holder
• Eliminates play and battery movement
• Fits shorty pack hard case batteries
• Unique design
• Premium graphite & aluminum material

click to enlarge
(click to enlarge)

Fully adjustable aluminum and graphite battery holder that allows to use standard hard case batteries of various dimensions from different manufacturers. To eliminate the play and battery movement, the height, width and length are fully adjustable. Slots in the graphite backstops allow to adjust the length and width. After installing the battery in place graphite backstops are pushed next to the battery and tightened with screws to alu mounts. Swivel battery strap is then assembled and tightened with alu nut.

The adjustable holder and the battery backstops are CNC-machined from lightweight aluminum and the battery holders are machined from premium lightweight graphite material.

Fits: XB2 & XT2 cars.


click to enlarge
(click to enlarge)

#323516 Lexan Front Wing DIV

• Increases front downforce
• Very strong
• Lower or upper mounting alternative
• Multiple mounting positions
• Super lightweight
• Premium Lexan material
• 1 piece with 2 different mounting alternatives

click to enlarge
(click to enlarge)

Stylish, effective wider front wing works perfectly with XRAY XB2 body and increases front down force. Multiple mounting positions allow to change the position of the wing and alter the down force. Made from strong high quality Lexan™ material.

Fits: XB2 cars.


click to enlarge
(click to enlarge)

#323515 Lexan Rear Wing Center Fin - ZAP

• Maximizes airflow efficiency
• Super lightweight
• Very strong
• Premium Lexan material

click to enlarge
(click to enlarge)

Stylish, effective rear center fin was developed and long term tested to maximize the rear wing air flow efficiency. Center fin is mounted on #323513 Lexan Rear Wing – RANK or #323517 Lexan Rear Wing - TEC. Made from strong high quality Lexan material.

Fits: XB2 & XB4 cars.


click to enlarge
(click to enlarge)

#323517 Lexan Rear Wing - TEC

• Increases rotation into the corner
• Increases traction out of corner
• Very strong
• Super lightweight
• Premium lexan material

click to enlarge
(click to enlarge)

Stylish, effective rear wing works perfectly with XRAY XB2 body. Flat design helps to get more rotation coming into the corner and increases traction coming out of corner. Made from strong high quality Lexan material.

Fits: XB2 & XB4 cars.


click to enlarge
(click to enlarge)

#321268 Graphite Gear Box Height Adjustment Plate
#321269 Graphite Gear Box Height Adjustment Plate
#324013 Alu Front-Mid Motor (3 Gears) Plate - Lowered -2mm - 7075 T6

• Increases forward traction
• Allows super-low ride height
• For high-traction conditions
• Keeps drive shafts linear
• Less rolling in corners
• Two different ride height plates available

click to enlarge
(click to enlarge)

To increase performance in high-traction conditions, the XB2 can use a super-low ride height. To keep the drive shafts linear, the gear box can be raised by 2mm using optional graphite plates.

With two different ride-height adjustable plates, you can raise just the gear box or the entire rear suspension.

Fits: XB2 cars.

click to enlarge
(click to enlarge)

click to enlarge
(click to enlarge)


click to enlarge
(click to enlarge)

#322572 Alu Steering Plate Rearward Linkage Mounting - Swiss 7075 T6

• More linear steering
• More predictable handling
• More precise steering
• Easily adjustable Ackermann positions

click to enlarge
(click to enlarge)

Alu steering plate for rearward linkage mounting allows mounting the steering linkages more rearwards which makes the steering more linear and makes the car more predictable. Ackermann is easily adjusted via steering link mounting positions on the steering plate. The alu steering plate gives more precise steering, but makes the steering more aggressive. CNC-machined from premium Swiss 7075 T6 aluminum.

Fits: XB2 & XT2 cars.


click to enlarge
(click to enlarge)

#324000 Short 2-Pad Slipper Clutch Set - Shocks in Front

• Allows frontward shock absorber mounting position
• Super narrow
• Externally adjustable
• Quick & easy tuning
• Ultra-efficient
• Lightweight
• Increases stability
• Higher cornering speed
• Better landings

click to enlarge
(click to enlarge)

Redesigned slipper clutch set allows the rear shock absorbers to be mounted frontwards. Frontward mounting position increases stability on surfaces where the rear of the car collapses, particularly in high-speed corners. Team drivers also prefer this position on low-grip tracks.

Power from the motor is transferred to the drivetrain via an externally-adjustable central slipper clutch for quick & easy tuning. The 2-pad slipper clutch ensures super-smooth clutch operation and efficient, consistent braking. It is very easy to make ultra-fine adjustments to the slipper clutch externally.

The slipper clutch pads are made from ultra-efficient SLS material with very-high slip efficiency, thus allowing very precise slip adjustment.

The lightweight slipper plates are machined from premium Swiss 7075 T6, additionally hardened before a final black surface treatment.

The plates have a machined relief which decreases the friction surface to assist with clutch slip adjustment. With this plate design, pressure is focused on the circumference of the clutch pads for increased efficiency.

Set includes 2-pad spur gears:
• #365775 Composite Slipper Clutch Spur Gear 75T/48P
• #365778 Composite Slipper Clutch Spur Gear 78T/48P

Fits: XB2 Dirt & XT2 Dirt.


click to enlarge
(click to enlarge)

#329708 Body for 1/10 2WD Off-Road Buggy 0.5mm - Beta 2 - Light

• Ultra-lightweight
• High-performance
• Low-profile
• Super-smooth airflow
• Increases steering
• Increases stability
• Improves handling in jumps
• Reduces roll
• Improves rotation

click to enlarge
(click to enlarge)

The optional ultra-lightweight, completely redesigned, high-performance, low-profile Beta 2 body with super-smooth airflow and all-new downforce areas. The Beta 2 body gives increased steering & stability while also improving handling in jumps. Lower weight reduces the roll of the car and improves rotation in corners.

The front part of the body has a redesigned high-downforce area. The sides of the body have upper downforce areas to generate more mid-body downforce, and the straight sidewalls improve stability. The upper part of the body was redesigned with a smooth flow channel.

Different XB2 bodies are available in different thicknesses for fine tuning the performance of the car.

Fits: XB2 cars.


click to enlarge
(click to enlarge)

#323112-G XT2 Composite Suspension Arm Rear Lower - Graphite

• Reliable
• Durable
• Special graphite composite mixture

click to enlarge
(click to enlarge)

Rear lower suspension arm redesigned to allow the shock absorbers to be mounted either frontwards or backwards.

Made from specially-formulated graphite composite material used for suspension arms, this arm is a perfect balance between reliability and performance; rigid enough for responsive feel and extreme durability.

Universal design rear arm can be used on both left & right sides. Suitable for high- and very-high-traction tracks.

Fits: XT2 cars.


click to enlarge
(click to enlarge)

#325324 Rear Drive Shaft 75mm with 2.5mm Pin - HUDY Spring Steel™
#325325 Rear Drive Shaft 72mm with 2.5mm Pin - HUDY Spring Steel™
#325326 Rear Drive Shaft 73mm with 2.5mm Pin - HUDY Spring Steel™

• Reliable
• Durable
• Various lengths for different situations

click to enlarge
(click to enlarge)

CNC-machined CVD rear drive shafts with 2.5mm pin for XB2 and XB4 cars, made from world-renowned HUDY Spring Steel™. Hardened with a proprietary hardening process, the drive shafts provide unbeatable lifetime and reliability.


click to enlarge
(click to enlarge)

#323354-G Composite Rear Upright - Graphite

• Special graphite composite mixture
• Increases stability
• Increases cornering speed
• For medium and high traction tracks
• Reliable
• Durable

click to enlarge
(click to enlarge)

Super-compact rear upright made from specially-formulated graphite composite material features multiple set-up options for upper & lower roll centers.

Upper roll center is adjustable via camber linkage & shims – up/down & in/out. Lower roll center is adjustable via eccentric inserts in 9 different positions – up/down & in/out.

The race-proven, 2-piece design allows fine-adjustment and increases durability as well as performance. The graphite rear uprights make the car more stable and increases cornering speed as well as overall strength of the car. The uprights are small in size but are very strong due to the special composite mixture used. Suitable for most track conditions, especially for medium- and high-traction tracks.

The upright fits on both left & right sides. Must be used with the #325324, #325325 or #325326 drive shafts.

Fits: XB2, XT2, XB4 cars.


click to enlarge
(click to enlarge)

#980320-T Titan Pin 3x20 (2)

• Titanium material
• Ultra-precise
• Super lightweight
• High durability
• Long life

click to enlarge
(click to enlarge)

Titanium pins, ultra-precision hand ground for high durability and long life. More than 40% lighter compared to standard steel pins. Dia. x length = 3mm x 20mm. Set of 2.

Fits: XB2, XT2 & RX8 cars.


click to enlarge
(click to enlarge)

#329901 2WD/4WD Rear Wheel Aerodisk with 12mm Hex - V2 - White (10)
#329913 2WD/4WD Rear Wheel Aerodisk with 12mm Hex - V2 - White (2)

• Redesigned countersunk center area
• Specially-designed 1/10 Off-Road Wheels
• Flexible yet durable material
• Excellent for high-competition racing
• Perfect fit
• 12mm internal hex
• Available as 2pcs set or 10pcs set

click to enlarge
(click to enlarge)

Specially-designed 2WD/4WD rear wheels with 12mm internal hex. The center countersunk area was redesigned to place the wheel nut deeper. Precision fit, perfect for high-competition racing. Made from flexible, durable material to withstand impacts. The side of the wheel is aerodynamic for maximum performance.

click to enlarge
(click to enlarge)

Special features of the wheel are visible from the inside: reinforcement ribs to make the wheels as stable as possible and eliminate deformation.

Fits: XB2 and XB4 cars.


click to enlarge
(click to enlarge)

#320901 XRAY XB2 Factory Team Upgrade for Carpet

• Factory Team upgrade for XB2C for carpet tracks
• Long-term used by Factory Team
• All-new alu upright design with multiple set-up options
• Lower roll center adjustment with 9 different positions
• Upper roll center adjustment up/down & in/out
• Longer drive shafts
• More forward traction
• Increases traction under braking
• Increases overall side grip & overall stability

click to enlarge
(click to enlarge)

Limited-quantity upgrade set to convert your XB2C into the same Spec version used by the Factory Team at carpet tracks. This complete set features all parts necessary for the upgrade: all-new rear aluminum uprights, aluminum upright plate, longer drive shafts, ball-bearings, eccentric bushings, and all necessary hardware.

The new aluminum uprights feature multiple set-up options for upper & lower roll centers. The upper roll center is adjusted at the camber linkage via shims in all directions up/down & in/out, while the lower roll center is adjustable via eccentric inserts in 9 different positions up/down & in/out.

This upgrade set was long-term tested and used by the Factory Team at major carpet races including EOS, XRS, MIBO, and other carpet tracks all around the world. The upgrade makes the XB2C more stable and increases overall side grip and forward traction. Traction under braking is also improved.

click to enlarge
(click to enlarge)

Fits: XB2\'18 Carpet.


click to enlarge
(click to enlarge)

#326181 Stainless Steel Battery Weight 35g

• Easier to drive
• Improves landing
• Inserted under battery, directly on chassis
• Stainless steel material
• Adds weight
• Lowers CG

click to enlarge
(click to enlarge)

Specially-designed 35g stainless steel weight for placement beneath short battery pack to add weight as low as possible. Makes the car easier to drive and improves landing. A must-have option part.

Fits: XB2 and XT2 cars.


click to enlarge
(click to enlarge)

#320900 Complete XB2 Dirt Rear Suspension Conversion Set

• Complete conversion set
• Convert XB2’18 Carpet into dirt car
• Generates more traction
• Increases stability
• Used by factory team

click to enlarge
(click to enlarge)

Complete rear suspension conversion set including ball differential to convert XB2 Carpet 2018 version into a car suitable for clay tracks. This conversion set includes wide rear suspension arms from XB4 kit as well all other parts necessary to upgrade the car into the specs as used by the factory team as well Ty Tessmann at the recent Reedy Race.

Includes:
#323325 Alu Rear Longer Lower Susp. Holder - Narrow - Rear (10mm)
#323353-M Composite Rear Upright - Medium
#325002 Ball Adjust. Diff for 2.5mm Pin - Set - HUDY Spring Steel™
#325323 Rear Drive Shaft 71mm with 2.5mm Pin - HUDY Spring Steel™
#327310 Rear Suspension Pivot Pin 3x46 mm (2)
#363111-H Composite Suspension Arm Rear Lower Right - Hard
#363121-H Composite Suspension Arm Rear Lower Left - Hard
#365357 Alu Wheel Hub 12mm - Offset \"+2.25mm\" (2)
#367320 Rear Arm Pivot Pin (2)

Fits: XB2\'18 Carpet.


click to enlarge
(click to enlarge)

#324910-G Composite Gear Differential Cover – Graphite
#324953-G Composite Gear Differential Case with Pulley 53T - Graphite

• Special graphite composite mixture
• Higher strength
• Lower weight

click to enlarge
(click to enlarge)

Gear differential case with 53T pulley and cover made from specially-formulated graphite composite mixture for increased strength and lower weight. Perfect balance between reliability and performance.

click to enlarge
(click to enlarge)

Fit: XB2 & XT2 cars.