|
|
| XRAY presents new authentic option parts for XRAY XB2 car: |
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
|
Set of front/rear progressive springs for XB2 and XB4. These springs are shorter with an open end and completely different progressive characteristics. The main advantage & benefit of progressive springs is that as the car initially enters the corner the springs work like softer springs to provide maximum traction. As the chassis begins to roll in the middle of the corner, the spring rate progressively increases until it works like a stiffer spring which allows the car to maintain maximum cornering speed.
XRAY springs, are manually measured, selected, and matched into pairs to guarantee precisely equal length and damping characteristics.
Each spring is laser-engraved with stripes to indicate the firmness, the more strips, the stiffer the spring. |
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
|
| Alu steering block graphite extension for left and right side. Allows for easy Ackermann position adjustment for fine-tuning on all surfaces and track conditions. 1-slot extension gives most of steering and agresevity from range of akerman plates. The outside wheel turn more than slot 2 and 3. Set of 2. |
|
(click to enlarge) |
|
|
|
| Alu steering block graphite extension for left and right side. Allows for easy Ackermann position adjustment for fine-tuning on all surfaces and track conditions. 2-slot extension turns outside wheels less, makes the car easier to drive, less aggressive and increases cornering speed. Set of 2. |
|
(click to enlarge) |
|
|
|
Alu steering block graphite extension for left and right side. Allows for easy Ackermann position adjustment for fine-tuning on all surfaces and track conditions. 3-slot extension turns outside wheels even less than 1 and 2, makes the car easier to drive, less aggressive and increases cornering speed. Set of 2.
|
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
|
A complete set of alu steering blocks and C-hubs. Ultra-strong construction provides very long life and durability in even the most extreme racing conditions. Using the steering blocks in an aluminium material reduces flex, and improves consistency, and will free up the car, mainly for high traction conditions. The aluminum parts are more reliable and stronger.
CNC-machined from Swiss 7075 T6 aluminum and black coated.
Direct replacement for the standard composite parts. Fits all XB2, XT2 and SCX kits.
|
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
|
Graphite electronics plate for weight balance adjustment. The plate can be easily installed in front ward or rearward position to adjust the weight balance.
CNC-machined from 1.6mm premium-grade graphite material.
|
|
(click to enlarge) |
|
|
|
| Specially-designed 30g stainless steel weight for placement under electronics to add weight as low as possible. Can be easily installed in front ward or rearward position. Helps to improve the balance of the car and makes the car easier to drive. |
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
|
| The alu steering arms for double sided plate generate more precise steering. Features mounting position for the steering linkage for an additional steering setting possibility. CNC-machined from high-quality Swiss 7075 T6 aluminum. Set of 2. |
|
(click to enlarge) |
|
|
|
#326201 Alu Servo Holders & Graphite Bridge
• Stiffer servo holder reduces chassis tweak
• Reinforces the front part of the car
• More reliable servo mounting
• Direct replacement for composite parts
• XB2, XT2, SCX
|
|
(click to enlarge) |
|
|
|
| Alu Servo Holders & Graphite Bridge reinforces the front part of the car. Direct replacement for standard composite servo holders. Fits all XB2, XT2 and SCX. |
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
|
Side guards made from specially-formulated graphite composite mixture, perfect for high-traction conditions. The graphite side guards makes car more stable and predictable.
Fits to all length of chassis. Fits XB2C, XB2D, XT2C, XT2D from 2020 version onwards.
|
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
|
| Active Differential - set for XB2. The unique XRAY Active Differential is a high-performance, adjustable front gear differential for XB2 ... vastly improving the buggy's speed and handling characteristics. The special design of the internal components using different angled segments allows the diff gears to engage on-power to increase the forward traction, making it faster and easier to drive. |
|
(click to enlarge) |
|
|
|
While the XRAY Active Differential is a performance option for serious racers who want to gain an edge on superior speed and handling, it is also of great benefit to drivers of all levels that want a more predictable and easy-to-drive car in all racing conditions.
Fits: XB2, XT2
|
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
|
Composite steering arm with steering mount hole is a part of Fully Adaptive Steering System allows easy changes to the steering assembly that transform the geometry and alter the handling characteristics.
For low traction conditions - steering link mounted directly on steering plate
For high traction conditions - steering link mount on left steering arm
Made from strong premium-grade graphite material for incredible strength and long lifespan.
|
|
(click to enlarge) |
|
|
|
Composite steering plate is a part of Fully Adaptive Steering System allows easy changes to the steering assembly that transform the geometry and alter the handling characteristics.
For low traction conditions - steering link mounted directly on steering plate
For high traction conditions â€✠steering link mount on left steering arm
Made from strong premium-grade graphite material for incredible strength and long lifespan.
Fits XB2 & XT2 & SCX |
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
|
Ultra-lightweight version of the XB2 Gamma 2C body is designed especially for high traction conditions. The profile of the body improves stability in fast corners, chicanes and helps with rotation in tight corners.
The high-performance, low-profile aerodynamic body for XB2C is designed by XRAY to perfectly fit the car and work in most track conditions especially for higher grip tracks. More down force have was added to the middle to increase rotation in slow corners. Less down force in rear and front give more corners speed without diving too much. Made from high-quality premium Lexan material.
Fits XB2
#329713 Body for 1/10 2WD Off-Road Buggy - Gamma 2C - Light |
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
|
Ultra-lightweight version of the XB2 Gamma 2D body is designed especially for low traction conditions. Lower weight reduces the roll of the car and improves corner speed. The profile of the body improves the stability and increases downforce towards the rear of the car to help generate more traction for the car.
The high-performance, low-profile aerodynamic body for XB2D is designed by XRAY to perfectly fit the car and work especially in low traction conditions. Specially designed to maximize rear down force to increase traction. Front was designed to give optimal steering. The sides of the body and cockpit are as flat as possible to allow air to flow around the body for improved side stability. On the top of roof are two integrated flow channels for proper airflow. Made from high-quality premium Lexan material.
Fits XB2
#329711 Body for 1/10 2WD Off-Road Buggy - Gamma 2D - Light |
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
|
Solid axle set includes lightweight axle shaft with 20T pulley, disc carrier, spur gear and hardware. Axle body is manufactured from alu SWISS Alu 7075 T6 Hard Coated material and has been strategically machined lighter than standard solid axle shaft. Especially hand-ground for maximum precision and smooth operation, additionally heat treated and black coated to ensure long life and maximum performance.
Designed for stock class to reduce maximum rotation mass and eliminate slipper effect.
Super lightweight adapter to eliminate extra weight.
Fits: XB2'20-21, XT2'21 |
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
|
Alu front roll-center holder with wider design and roll center positions moved more outside increases strength, reliability and makes the handling more precise and more forgiving. Allows to use front anti-roll bar. Super-strong aluminum holder features three-roll center positions and is CNC-machined from high-quality Swiss 7075 T6 aluminum.
Fits XB2 & XT2
|
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
|
Molded composite motor gear box made from specially-formulated graphite composite material to fit REAR and FRONT motor position of XB2. The graphite molded gear box is lighter and stronger.
|
|
(click to enlarge) |
|
|
|
All parts fit perfectly together, and the super-easy access to the rear differential will be appreciated by every racer. The durable gear box houses the differential and rear transmission, allows the mounting of the rear roll center holder, motor plate, and rear shock tower.
|
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
|
Steering block graphite extension, works on either left or right side. Allows for easy Ackermann position adjustment for fine-tuning on all surfaces and track conditions. 3-slot plate has increased steering angle which increases steering in slow corners. Set of 2.
Fits all XB2 & XT2 |
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
|
Set of lower aluminum shock collars for increased reliability. Allow to decrease the ride height for lower CG. Stylish and lightweight collars are CNC-machined from premium Swiss 7075 T6 aluminum and are strategically lightened. Set of four. Black color.
Fits all XB2, XB4, XT2 & XT4
|
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
|
Molded composite motor gear box made from specially-formulated graphite composite material to fit REAR and FRONT motor position of XB2. The graphite molded gear box is lighter and stronger.
All parts fit perfectly together, and the super-easy access to the rear differential will be appreciated by every racer. The durable gear box houses the differential and rear transmission, allows the mounting of the rear roll center holder, motor plate, and rear shock tower.
Fits only XB2•20
|
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
|
Gear differential cover for LCG Differential made from specially-formulated graphite composite mixture for increased strength and lower weight. Perfect balance between reliability and performance.
Fits: XB2•20
|
|
(click to enlarge) |
|
|
|
Gear differential case with 53T pulley for LCG Differential made from specially-formulated graphite composite mixture for increased strength and lower weight. Perfect balance between reliability and performance.
Fits: All XB2
|
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
|
IFMAR legal size, specially-designed 2WD front wheels with 12mm internal hex. Perfect fit, recommended for high-competition racing. Made from very flexible yet durable material to withstand impacts. The side of the wheel is aerodynamic for maximum performance. Medium hardness.
Special features of the wheel are visible from the inside: reinforcement ribs to make the wheels as stable as possible and eliminate deformation.
Set of 5 pairs (10 pcs) for the price of 4 pairs. A great value pack.
Fits all XB2
|
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
|
CNC-machined alu rear shock tower from 3mm thick premium Swiss 7075 T6 aluminum. Features updated shock positions and three different wing mounting positions. The rear tower is compatible with both front and rear motor LCG gearboxes, reducing the number of parts needed to change between configurations.
The shock tower is universal for both Dirt and Carpet edition.
Fits: All XB2
|
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
|
CNC-machined from high-quality 2.5mm Swiss 7075 T6 aluminum, the lightweight chassis retains the necessary strength and rigidity, and is black coated at XRAY•s own in-house fully robotic coating line. Features bent sides for improved weight balance and increased traction with maximum stability of the car. The rear part of the chassis is narrower.
Long chassis increases traction. Recommended for low traction and bumpy Astro Turf tracks.
Universal for both Dirt and Carpet edition.
There are three different lengths of chassis available each suitable for particular track conditions.
Fits: XB2•20
|
|
(click to enlarge) |
|
|
|
CNC-machined from high-quality 2.5mm Swiss 7075 T6 aluminum, the lightweight chassis retains the necessary strength and rigidity, and is black coated at XRAY•s own in-house fully robotic coating line. Features bent sides for improved weight balance and increased traction with maximum stability of the car. The rear part of the chassis is narrower.
Short chassis increases rotation in corners and makes the car more reactive. Recommended especially for carpet tracks.
Universal for both Dirt and Carpet edition.
There are three different lengths of chassis available each suitable for particular track conditions.
Fits: XB2•20
|
|
(click to enlarge) |
|
|
|
#323400 XB2 Anti-Roll Bar Rear 1.0mm Set
• Complete anti-roll bar set
• Includes 1mm anti-roll bar wire
• Special spring steel material
• Stabilizes rear of the car
• Quickly adjustable
• Easy assembly
• Various anti-roll bar wires available
|
|
(click to enlarge) |
|
|
|
Rear anti-roll bar set 1.0mm for XB2 made from special spring steel material. Stabilizes rear of the car. Roll bars are easily mounted to the gearbox and can be adjusted with linkages.
The thickness of each anti-roll bar is laser-engraved for easy identification. Anti-roll bar wires of different thickness are optionally available for fine-tuning.
Fits XB2•20, XB2•19, XB2•18, XB2•17, XB2•16 |
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
|
| Optional alu rear roll-center holder CNC-machined from premium Swiss 7075 T6 aluminum. Features 3 positions for fine roll-center adjustments. |
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
|
Optional front roll-center holder CNC-machined from high-quality 2mm Swiss 7075 T6 aluminum. Alu holder increases strength and makes the handling more precise and more forgiving. Allows to use front anti-roll bar.
Fits XB2•20, XB2•19, XB2•18, XB2•17, XB2•16, XT2•19, XT2•18, XT2•17 |
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
|
• Rearwards steering linkage mounting
• More precise steering
• Makes car more predictable
• Smoother feeling
• Greater range of Ackermann settings
• Swiss 7075 T6 aluminum
• Black coated
Alu steering plate for rearward linkage mounting allows mounting the steering linkages more rearwards which makes the steering more precise and makes the car more predictable and results in smoother feeling. The design of the plate allows for a greater range of Ackermann settings comparing to the standard steering plate. CNC-machined from premium Swiss 7075 T6 aluminum.
|
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
|
| CNC-machined alu front shock tower from 3mm thick premium Swiss 7075 T6 aluminum. Ultra-rigid design for unsurpassed strength and long lifespan. Include new extra positions for shocks and wing. Black coated. Laser-engraved with the XRAY logo. |
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
|
| Optional stainless steel weights for front, front-middle and middle of the XB2 cars. Small & easy to install chassis weight with clean layout made from stainless steel. Quick & easy attachment to chassis. Marked with weight value for easy identification. |
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
|
Fully adjustable aluminum and graphite battery holder that allows to use standard hard case batteries of various dimensions from different manufacturers. To eliminate the play and battery movement, the height, width and length are fully adjustable. Slots in the graphite backstops allow to adjust the length and width. After installing the battery in place graphite backstops are pushed next to the battery and tightened with screws to alu mounts. Swivel battery strap is then assembled and tightened with alu nut.
The adjustable holder and the battery backstops are CNC-machined from lightweight aluminum and the battery holders are machined from premium lightweight graphite material.
Fits: XB2 & XT2 cars.
|
|
(click to enlarge) |
|
|
|
#323516 Lexan Front Wing DIV
• Increases front downforce
• Very strong
• Lower or upper mounting alternative
• Multiple mounting positions
• Super lightweight
• Premium Lexan material
• 1 piece with 2 different mounting alternatives
|
|
(click to enlarge) |
|
|
|
Stylish, effective wider front wing works perfectly with XRAY XB2 body and increases front down force. Multiple mounting positions allow to change the position of the wing and alter the down force. Made from strong high quality Lexan• material.
Fits: XB2 cars. |
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
|
Stylish, effective rear center fin was developed and long term tested to maximize the rear wing air flow efficiency. Center fin is mounted on #323513 Lexan Rear Wing • RANK or #323517 Lexan Rear Wing - TEC. Made from strong high quality Lexan material.
Fits: XB2 & XB4 cars. |
|
(click to enlarge) |
|
|
|
#323517 Lexan Rear Wing - TEC
• Increases rotation into the corner
• Increases traction out of corner
• Very strong
• Super lightweight
• Premium lexan material
|
|
(click to enlarge) |
|
|
|
Stylish, effective rear wing works perfectly with XRAY XB2 body. Flat design helps to get more rotation coming into the corner and increases traction coming out of corner. Made from strong high quality Lexan material.
Fits: XB2 & XB4 cars. |
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
|
To increase performance in high-traction conditions, the XB2 can use a super-low ride height. To keep the drive shafts linear, the gear box can be raised by 2mm using optional graphite plates.
With two different ride-height adjustable plates, you can raise just the gear box or the entire rear suspension.
Fits: XB2 cars. |
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
|
Alu steering plate for rearward linkage mounting allows mounting the steering linkages more rearwards which makes the steering more linear and makes the car more predictable. Ackermann is easily adjusted via steering link mounting positions on the steering plate. The alu steering plate gives more precise steering, but makes the steering more aggressive. CNC-machined from premium Swiss 7075 T6 aluminum.
Fits: XB2 & XT2 cars. |
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
|
Redesigned slipper clutch set allows the rear shock absorbers to be mounted frontwards. Frontward mounting position increases stability on surfaces where the rear of the car collapses, particularly in high-speed corners. Team drivers also prefer this position on low-grip tracks.
Power from the motor is transferred to the drivetrain via an externally-adjustable central slipper clutch for quick & easy tuning. The 2-pad slipper clutch ensures super-smooth clutch operation and efficient, consistent braking. It is very easy to make ultra-fine adjustments to the slipper clutch externally.
The slipper clutch pads are made from ultra-efficient SLS material with very-high slip efficiency, thus allowing very precise slip adjustment.
The lightweight slipper plates are machined from premium Swiss 7075 T6, additionally hardened before a final black surface treatment.
The plates have a machined relief which decreases the friction surface to assist with clutch slip adjustment. With this plate design, pressure is focused on the circumference of the clutch pads for increased efficiency.
Set includes 2-pad spur gears:
• #365775 Composite Slipper Clutch Spur Gear 75T/48P
• #365778 Composite Slipper Clutch Spur Gear 78T/48P
Fits: XB2 Dirt & XT2 Dirt. |
|
|
|
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
|
The optional ultra-lightweight, completely redesigned, high-performance, low-profile Beta 2 body with super-smooth airflow and all-new downforce areas. The Beta 2 body gives increased steering & stability while also improving handling in jumps. Lower weight reduces the roll of the car and improves rotation in corners.
The front part of the body has a redesigned high-downforce area. The sides of the body have upper downforce areas to generate more mid-body downforce, and the straight sidewalls improve stability. The upper part of the body was redesigned with a smooth flow channel.
Different XB2 bodies are available in different thicknesses for fine tuning the performance of the car.
Fits: XB2 cars. |
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
|
Rear lower suspension arm redesigned to allow the shock absorbers to be mounted either frontwards or backwards.
Made from specially-formulated graphite composite material used for suspension arms, this arm is a perfect balance between reliability and performance; rigid enough for responsive feel and extreme durability.
Universal design rear arm can be used on both left & right sides. Suitable for high- and very-high-traction tracks.
Fits: XT2 cars. |
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
|
| CNC-machined CVD rear drive shafts with 2.5mm pin for XB2 and XB4 cars, made from world-renowned HUDY Spring Steel•. Hardened with a proprietary hardening process, the drive shafts provide unbeatable lifetime and reliability. |
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
|
Super-compact rear upright made from specially-formulated graphite composite material features multiple set-up options for upper & lower roll centers.
Upper roll center is adjustable via camber linkage & shims • up/down & in/out. Lower roll center is adjustable via eccentric inserts in 9 different positions • up/down & in/out.
The race-proven, 2-piece design allows fine-adjustment and increases durability as well as performance. The graphite rear uprights make the car more stable and increases cornering speed as well as overall strength of the car. The uprights are small in size but are very strong due to the special composite mixture used. Suitable for most track conditions, especially for medium- and high-traction tracks.
The upright fits on both left & right sides. Must be used with the #325324, #325325 or #325326 drive shafts.
Fits: XB2, XT2, XB4 cars. |
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
|
Titanium pins, ultra-precision hand ground for high durability and long life. More than 40% lighter compared to standard steel pins. Dia. x length = 3mm x 20mm. Set of 2.
Fits: XB2, XT2 & RX8 cars. |
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
|
| Specially-designed 2WD/4WD rear wheels with 12mm internal hex. The center countersunk area was redesigned to place the wheel nut deeper. Precision fit, perfect for high-competition racing. Made from flexible, durable material to withstand impacts. The side of the wheel is aerodynamic for maximum performance. |
|
(click to enlarge) |
|
|
|
Special features of the wheel are visible from the inside: reinforcement ribs to make the wheels as stable as possible and eliminate deformation.
Fits: XB2 and XB4 cars. |
|
(click to enlarge) |
|
|
|
#320901 XRAY XB2 Factory Team Upgrade for Carpet
• Factory Team upgrade for XB2C for carpet tracks
• Long-term used by Factory Team
• All-new alu upright design with multiple set-up options
• Lower roll center adjustment with 9 different positions
• Upper roll center adjustment up/down & in/out
• Longer drive shafts
• More forward traction
• Increases traction under braking
• Increases overall side grip & overall stability
|
|
(click to enlarge) |
|
|
|
Limited-quantity upgrade set to convert your XB2C into the same Spec version used by the Factory Team at carpet tracks. This complete set features all parts necessary for the upgrade: all-new rear aluminum uprights, aluminum upright plate, longer drive shafts, ball-bearings, eccentric bushings, and all necessary hardware.
The new aluminum uprights feature multiple set-up options for upper & lower roll centers. The upper roll center is adjusted at the camber linkage via shims in all directions up/down & in/out, while the lower roll center is adjustable via eccentric inserts in 9 different positions up/down & in/out.
This upgrade set was long-term tested and used by the Factory Team at major carpet races including EOS, XRS, MIBO, and other carpet tracks all around the world. The upgrade makes the XB2C more stable and increases overall side grip and forward traction. Traction under braking is also improved.
|
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
|
Specially-designed 35g stainless steel weight for placement beneath short battery pack to add weight as low as possible. Makes the car easier to drive and improves landing. A must-have option part.
Fits: XB2 and XT2 cars. |
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
|
| Gear differential case with 53T pulley and cover made from specially-formulated graphite composite mixture for increased strength and lower weight. Perfect balance between reliability and performance. |
|
(click to enlarge) |
|
|
