xrayxrayHome XRAY homeXRAY X-shopXRAY X-forumRCAmerica
supportsearchcontactguestbooksite map
newsproductsaboutusworldwide headlines

 

XRAY presents new authentic option parts for XRAY XT2 cars:

click to enlarge
(click to enlarge)


#325318 XT2 Rear Drive Shaft 95mm with 2.5mm Pin- HUDY Spring Steel™

• Reliable
• Durable
• 2.5mm pin
• HUDY Spring Steel™
• For use with #325002 Ball Adjustable Diff

click to enlarge
(click to enlarge)


CNC-machined rear drive shaft (95 mm) with 2.5 mm pin, made from world-renown HUDY Spring Steel™. Strategically-machined, the lightweight drive shaft has been weight-reduced without compromising strength. Hand ground for maximum precision, then individually measured and inspected. Suggested to use with #325002 Ball Adjust. Diff For 2.5mm Pin - Set - HUDY Spring Steel™.

Fits: XT2'19 Carpet & XT2'19 Dirt.



click to enlarge
(click to enlarge)


#329705 Body 1/10 2WD Stadium Truck - F/R Shock Position – Light

• Ultra-lightweight
• High-performance
• For front or rear shock position
• Low-profile
• Super-smooth airflow

click to enlarge
(click to enlarge)


Redesigned XT2 body allow shock absorbers to be mounted either frontwards or rearwards. Provides maximum downforce with lowest possible CG to avoid chassis roll. The high-performance aerodynamic body with high-downforce areas for proper airflow was designed by XRAY to perfectly fit the XT2 and work in most track conditions. The body is made from high-quality premium Lexan™ material.

Effective rear wing was designed to work perfectly with the XRAY XT2 body. Made from strong Lexan™ material, the wing is supported on wing mounts by extra flat shims to better support and extend the life of the wing.


#323520 XT2 Lexan Rear Wing 1.0mm - High
#323521 XT2 Lexan Rear Wing 1.0mm - Low

• Optional wings with different downforce
• Extra strong


click to enlarge
(click to enlarge)

click to enlarge
(click to enlarge)


Stylish, effective REAR wing designed to work perfectly with original XRAY XB2 bodies. Two designs available for either increased or decreased downforce.

Made from strong Lexan™ material, the wing is mounted to the wing mounts supported by extra-flat shims to better support and increase the lifespan of the wing.



click to enlarge
(click to enlarge)


#321268 Graphite Gear Box Height Adjustment Plate
#321270 XT2 Graphite Gear Box Height Adjustment Plate
#324013 Alu Front-Mid Motor (3 Gears) Plate - Lowered -2mm - 7075 T6
#324015 Alu Front-Mid Motor (3 Gears) Plate - Lowered -4mm - 7075 T6

• Increases forward traction
• Allows super-low ride height
• For high-traction conditions
• Keeps drive shafts linear
• Less rolling in corners
• Two different ride height plates available

click to enlarge
(click to enlarge)


To increase performance in high-traction conditions, the XT2 can use a super-low ride height. To keep the drive shafts linear, the gear box can be raised by 2mm using optional graphite plates.

With two different ride-height adjustable plates, you can raise just the gear box or the entire rear suspension.

click to enlarge
(click to enlarge)

click to enlarge
(click to enlarge)



click to enlarge
(click to enlarge)


#329703 Body for 1/10 2WD Off-Road Stadium Truck - Lightweight

• Light weight
• Decreased roll
• Increased cornering speed
• More aggressive handling

click to enlarge
(click to enlarge)


High-performance, low-profile aerodynamic body designed by XRAY to perfectly fit the XT2 Stadium truck. Used by the Factory Team in medium to high-traction conditions. The light weight of the body ensures has high weight to reduce roll, increase cornering speed, and offer more aggressive handling.

Fits: XT2.



click to enlarge
(click to enlarge)


#365360 Alu Wheel Hub 12mm - Offset "+4.5mm" (2)

• Optional 12mm wheel hubs
• Precision track-width change
• Swiss 7075 T6 aluminum
• Lightweight design
• Additionally drilled
• Black coated
• Marked for easy identification

click to enlarge
(click to enlarge)


CNC-machined 12mm wheel hubs made from Swiss 7075 T6 have +4.5mm offset for wider track-width. Strategically machined for optimum strength, balance, and lightness. Marked for easy identification. Secured on drive axle by setscrew. Set of 2.



click to enlarge
(click to enlarge)


#329912 Stadium Truck Wheel Aerodisk with 12mm Hex - White (2)

• Flexible yet durable material
• Specially-designed 1/10 stadium truck wheels
• Excellent for high-competition racing
• Perfect fit
• 12 mm internal hex

click to enlarge
(click to enlarge)


Specially-designed stadium truck wheels with 12mm internal hex. Perfect fit, and perfect for high-competition racing. The wheels are made from flexible material while still being durable against impacts. The side of the wheel is aerodynamic for maximum performance.

Special features of the wheel are visible from the inside: reinforcement ribs to make the wheels as stable as possible and eliminate deformation.

Fit XT2.



click to enlarge
(click to enlarge)


• High-performance pinions
• Lightweight aircraft duraluminum
• Ultra-true running
• Vibration-free operation
• Manually inspected
• Individually run-in

click to enlarge
(click to enlarge)


High-strength pinion gears made from tough 7075 T6 aluminum and specially hardcoated for superior strength, light weight, and high durability. Created on a special gear machine, all pinions feature ultra-precise tooth shaping and ultra-true running for vibration-free operation. Fine internal threading allows easy installation. Each pinion is fine etched with the tooth number for easy & quick identification.

Available in popular gearing sizes, allowing you to find the perfect gear ratio for any track.

#365726 Alu Pinion Gear – Hardcoated 26T / 48
#365726 Alu Pinion Gear – Hardcoated 27T / 48
#365726 Alu Pinion Gear – Hardcoated 28T / 48
#365726 Alu Pinion Gear – Hardcoated 29T / 48
#365726 Alu Pinion Gear – Hardcoated 30T / 48
#365726 Alu Pinion Gear – Hardcoated 31T / 48
#365726 Alu Pinion Gear – Hardcoated 32T / 48
#365726 Alu Pinion Gear – Hardcoated 33T / 48
#365726 Alu Pinion Gear – Hardcoated 34T / 48
#365726 Alu Pinion Gear – Hardcoated 353T / 48
#365726 Alu Pinion Gear – Hardcoated 36T / 48
#365726 Alu Pinion Gear – Hardcoated 37T / 48
#365726 Alu Pinion Gear – Hardcoated 38T / 48

Fit: XB4, XB2 and XT2 cars.



click to enlarge
(click to enlarge)


#322111-G XT2 Composite Suspension Arm Front Lower - Graphite
#323111-G XT2 Composite Suspension Arm Rear Lower - Graphite

• Special graphite composite mixture
• For high- and very-high traction tracks
• Reliable
• Durable

click to enlarge
(click to enlarge)


Lower suspension arms made from specially-formulated graphite composite material. The exclusive composite mixture used for suspension arms is a perfect balance between reliability and performance. The suspension arms are rigid to provide a responsive feel and extreme durability. Suitable for high- and very-high-traction tracks.

Universal design arms can be used on both left & right sides.

click to enlarge
(click to enlarge)


Fit: XT2.



click to enlarge
(click to enlarge)


#322472 XT2 Front Anti-Roll Bar 1.2mm
#322474 XT2 Front Anti-Roll Bar 1.4mm - standard
#322476 XT2 Front Anti-Roll Bar 1.6mm
#322478 XT2 Front Anti-Roll Bar 1.8mm

• Optional anti-roll bars for super-fine tuning
• Laser engraved for easy identification


click to enlarge
(click to enlarge)


Front anti-roll bar made from special spring steel material.

Anti-roll bar wires are available in different thicknesses (1.2–1.8mm) to precisely tune the handling of your car.

Fit XT2.



click to enlarge
(click to enlarge)


#322111-H XT2 Composite Suspension Arm Front Lower - Hard
#323111-H XT2 Composite Suspension Arm Rear Lower - Hard

• For high traction
• For high temperatures
• Molded from new hard material
• Higher stability

click to enlarge
(click to enlarge)


HARD lower suspension arms made from super-tough high-tech composite material. The exclusive composite mixture used for suspension arms gives a perfect balance between reliability and performance; the suspension arms are rigid enough for a responsive feel and extreme durability.

click to enlarge
(click to enlarge)


The arms - molded from hard composite - are suitable for most track conditions, especially for medium- and high-traction tracks.

Universal design allows these arms to be used on both left and right sides.


Fit XT2.

 
  T4 Is Double ETS Champion    
  XT8E Wins At 1/8 Off-Road ROAR E-Nats In US    
  GTX8 Is European Vice-Champion    
  XT8 Is US National Champion    
  XB4 & XT2 Are EOS 2016/2017 Champions    
  XB8E'17 Wins At The NEO Race    
  X12 Is Double European Champion    
  X12 Wins At 2017 ROAR Nationals    
  T4 Wins At 2017 TITC    
  XRAY T4 Double Win At Snowbird Nationals 2017    
  The largest and most powerful set-up sheet database in the world..    
 
   
  All artwork & webdesign by XRAY. All content © 1999 - 2009 by XRAY • Terms of use • Privacy & security