xrayxrayHome XRAY homeXRAY X-shopXRAY X-forumRCAmerica
supportsearchcontactguestbooksite map
newsproductsaboutusworldwide headlines

 
XRAY presents new authentic option parts for XRAY GTX8 car:

click to enlarge
(click to enlarge)

#358462-Y GT 4-Shoe Yellow Clutch Shoe

• Provides higher initial bite but also more slippage
• For medium- and high-traction tracks
• Better feeling on higher grip
• Yellow color
• Fits GTX8

click to enlarge
(click to enlarge)

CNC-machined yellow clutch shoe for GTX clutch. Material in this clutch shoe gives higher initial bite but also more slippage. Recommended for medium- and high-traction tracks. Yellow color.



click to enlarge
(click to enlarge)

#354222 Alu Carrier for 2-Speed Gear (2nd) - Tighter - Swiss 7075 T6


• Tighter GTX alu carrier for 2-speed gear
• Super-smooth power transfer
• Improved forward acceleration
• Improved shifting consistency
• Swiss 7075 T6 aluminum
• Fits GTX



click to enlarge
(click to enlarge)

The tighter 2nd-gear carrier (drum) allows for super-smooth power transfer and acceleration and provides better forward traction. Designed for use with 2-speed transmission.

The carrier is redesigned to improve the shifting consistency.

CNC-machined from high-quality Swiss 7075 T6 aluminum.

Fits GTX



click to enlarge
(click to enlarge)

#356153-L GTXE Box for Standard & Short Battery Pack with Cooling (2)


• Redesigned battery holder with cooling holes
• Tweak-free split battery box
• For saddle pack batteries
• Accommodates both standard and short battery packs
• Fits GTXE’22 onwards





click to enlarge
(click to enlarge)

Battery box with cooling holes for saddle pack batteries. Tweak-free split battery box accommodates both standard and short battery packs having the added ability to move front/back for additional weight balance adjustment.

Fits GTXE’22 onwards







click to enlarge
(click to enlarge)

#358423 Alu Pinion Gear 14/19T - Hard Coated

• High-strength separate one-piece machined 2-gear 14/19T pinion gear
• Hard coated for superior strength
• Light weight
• Durable
• Ultra-precise tooth shaping
• Easy installation
• SWISS 7075 T6 Aluminum
• Fits GTX8’23

click to enlarge
(click to enlarge)

High-strength separate one-piece machined 2-gear 14/19T pinion gear module from tough 7075 T6 aluminum and specially hard coated for superior strength, light weight, and high durability. Created on a special gear machine, all pinions feature ultra-precise tooth shaping and ultra-true running for vibration-free operation. Fine internal threading allows easy installation. Each pinion is fine etched with the tooth number for quick & easy identification.




click to enlarge
(click to enlarge)

#351460 GT Horizontal Body Backstop - Set

• Horizontal Body Backstop
• Reinforcement of body
• Protecting body in crash
• Fits GTX8, GTXE


click to enlarge
(click to enlarge)

Prevents the rear part of the body from being stuck after a crash. Mounts directly to rear body holder.



click to enlarge
(click to enlarge)

#3358420 Alu Pinion Gear 13/17T - Hard Coated

#358421 Alu Pinion Gear 13/18T - Hard Coated


• Separate one-piece machined 2-gear pinion gear module
• High-performance pinion
• Ultra-lightweight design
• Lightweight aircraft aluminum
• Individually run-in
• Hard coated
• Fits GTX8’23 & Higher

click to enlarge
(click to enlarge)

High-strength separate one-piece machined 2-gear 13/17T pinion gear module from tough 7075 T6 aluminum and specially hard coated for superior strength, light weight, and high durability. Created on a special gear machine, all pinions feature ultra-precise tooth shaping and ultra-true running for vibration-free operation. Fine internal threading allows easy installation. Each pinion is fine etched with the tooth number for quick & easy identification.

click to enlarge
(click to enlarge)

High-strength separate one-piece machined 2-gear 13/18T pinion gear module from tough 7075 T6 aluminum and specially hard coated for superior strength, light weight, and high durability. Created on a special gear machine, all pinions feature ultra-precise tooth shaping and ultra-true running for vibration-free operation. Fine internal threading allows easy installation. Each pinion is fine etched with the tooth number for quick & easy identification.



click to enlarge
(click to enlarge)


#356241 GTXE'22 Graphite Fan Holder 2.5mm

• Graphite Fan Holder for saddle pack configuration
• Handy holder for RC fan
• Less vibrations from chassis
• Easy Access
• Premium 2.5mm graphite
• Fits GTXE'22

click to enlarge
(click to enlarge)

CNC-machined fan holder made from premium graphite material designed for saddle pack layout. This fan holder is designed to accommodate the GTXE in the saddle pack configuration. The fan holder reduces vibrations from the chassis and thus increasing lifetime of the fan.



click to enlarge
(click to enlarge)

#352278 Alu Caster Block 6° Right - Swiss 7075 T6

#352288 Alu Caster Block 6° Left - Swiss 7075 T6

•? Alu version of C-hubs
•? Fits C-hub suspension XB8/GTX/XT8
•? Increases stability
•? More precise handling
•? Ultra-strong
•? Durable
•? Long lifespan
•? Laser engraved for easy identification
•? Black anodized
•? SWISS 7075 T6

click to enlarge
(click to enlarge)

The Alu C-hubs with 6° caster were specially developed for the GT on-road platform. CNC-machined from premium Swiss 7075 T6 aluminum. Ultra-strong construction provides long lifespan & durability in even the most extreme racing conditions.

Includes XRAY composite bushings for super-precise and smooth steering action. Laser-engraved with XRAY logo, caster value, and 'L' for quick & easy identification.

Precision machined with highest tolerances using premium fully-automatic German CNC-machines. High-quality coating is done at XRAY's own in-house fully-robotic coating line, ensuring a perfect surface every time.

Use with #352278 Alu Caster Block 6° Right

click to enlarge
(click to enlarge)

The Alu C-hubs with 6° caster were specially developed for the GT on-road platform. CNC-machined from premium Swiss 7075 T6 aluminum. Ultra-strong construction provides long lifespan & durability in even the most extreme racing conditions.

Includes XRAY composite bushings for super-precise and smooth steering action. Laser-engraved with XRAY logo, caster value, and 'R' for quick & easy identification.

Precision machined with highest tolerances using premium fully-automatic German CNC-machines. High-quality coating is done at XRAY's own in-house fully-robotic coating line, ensuring a perfect surface every time.

Use with #352288 Alu Caster Block 6° Left



click to enlarge
(click to enlarge)

#358661 Graphite 150CC Fuel Tank Guard

• Protects the fuel tank from heat
• More consistent fuel
• Consistent engine performance
• CNC-machined
• Strong graphite material
• For 150CC fuel tank
• Lightweight

click to enlarge
(click to enlarge)

Effective fuel tank guard for 150cc fuel tank is CNC-machined from strong graphite material. The lightweight guard protects the fuel tank from heat which ensures consistency of the fuel and as such more consistent engine performance.

Fits GTX8 & XT8




click to enlarge
(click to enlarge)

#358511 GT 2-Speed 4-Shoe Clutch Bell - Lightweight

• 4-shoe clutch bell for GT
• Strategically lightened
• Ultra-strong
• HUDY Steel
• Durable

click to enlarge
(click to enlarge)

GT 2-speed clutch bell for 4-shoe clutch system made from HUDY steel. Precision machined on a special gear machine, strategically lightened without sacrificing strength or durability.

Fits all GTX8



click to enlarge
(click to enlarge)

#352390 GT Alu Shock Plate - Swiss 7075 T6 (L+R)

• Shock plates for GT Platform
• For front & Rear suspension
• Increases corner speed
• Improves stability
• For both front and rear suspension arms
• SWISS 7075 T6
• Black anodizes
• Set L+R

click to enlarge
(click to enlarge)

The machined aluminum shock plate extensions for GT platform can be used on both front and rear suspension arms. The shock plate extensions allow to mount the shock absorbers more in outside position which helps to increase corner speed and improves the stability of the car.

Fits GTX8 and GTXE cars.



click to enlarge
(click to enlarge)

See the GTX8 2020 Manual - supplementary sheet





click to enlarge
(click to enlarge)

#355025 Alu Differential Case • Large Volume • Hard Coated


• SWISS 7075 T6
• Large volume case
• Higher resistance to overheating
• Lightweight
• Super-smooth
• Extended lifespan
• Efficient operation

click to enlarge
(click to enlarge)

Rubber-sealed differential housings made from high-quality Swiss 7075 T6 aluminum increases performance in high temperature conditions. Larger oil volume prevents the diff from overheating, extending its lifespan. CNC-machined from premium lightweight T6 aluminum. Black coated.

Fits: XB8•19, XB8•18, XB8•17, XB8E•19, XB8E•18, XB8E•17, XT8•19, XT8•17, XT8E•19, GTX8•19





click to enlarge
(click to enlarge)

#352275 Alu Caster Block 2• Right - Swiss 7075 T6

#352285 Alu Caster Block 2• Left - Swiss 7075 T6

• Designed specially for GT platform
• Increases steering
• Reduces tire wear
• Ultra-strong
• Durable
• Long lifespan
• Laser-engraved for easy identification
• Black anodized
• SWISS 7075 T6

click to enlarge
(click to enlarge)

click to enlarge
(click to enlarge)

Authentic XRAY RIGHT-side 2• alu caster block & XRAY LEFT-side 2• alu caster block are CNC-machined from premium Swiss 7075 T6 aluminum. Ultra-strong construction provides long lifespan & durability in even the most extreme racing conditions.

Designed specially for GT platform to increase the steering and to reduce the tire wear.

Includes XRAY composite bushings for super-precise and smooth steering action. Laser-engraved with XRAY logo, caster value, and •R• & •L• for quick & easy identification.

Precision machined with highest tolerances using premium fully-automatic German CNC-machines. High-quality coating is done at XRAY•s own in-house fully-robotic coating line, ensuring a perfect surface every time.

Fits only XRAY GTX8 and GTXE cars



click to enlarge
(click to enlarge)

• Complete conversion set
• For GTX platform
• Increases steering
• Reduces tire wear
• More responsive handling
• Faster best lap time
• Faster average run

click to enlarge
(click to enlarge)

click to enlarge
(click to enlarge)

Complete C-hub conversion set for GTX platform fits both nitro and electric powered GTX. The C-hub suspension is suited for most standard track conditions and makes the car more responsive and increases steering resulting into faster lap times. The C-hub suspension reduces tire wear. The caster is easily adjusted +/-2 with various optional caster blocks available.

Fits: GTX8, GTXE




click to enlarge
(click to enlarge)

#354252 GT Graphite Center Mounting Plate 2.5mm

• Stiffer
• More consistent in hot conditions

click to enlarge
(click to enlarge)

Center mounting plate made from premium graphite material. The stiffer design improves consistency in high temperature racing conditions.



click to enlarge
(click to enlarge)

#358402 GT 4-Shoe Clutch - Complete Set

• 4-shoe clutch design
• Super-easy clutch setting
• Smaller & lighter internal parts
• More balanced clutch bell engagement
• Improves engagement
• Improves throttle feel


Complete set of 4-shoe clutch system includes flywheel, graphite clutch shoes, medium clutch spring, assembly screws, flywheel collar, flywheel nut and pressure sleeve. Improves clutch bell engagement for better engine response and improves throttle feel.

The 4-shoe clutch design allows for super-easy clutch setting from soft to hard setting, each suitable for different track conditions and racing style.

The 4-shoe clutch features smaller, lighter internal parts, and the design allows for more balanced clutch bell engagement compared to the traditional 3-shoe design.

The clutch setting can be tuned with the adjustment nut to control the engagement point as desired.

Fits: GTX8.



click to enlarge
(click to enlarge)

#352498 Front Anti-Roll Bar 2.8mm

• Premium heat-treated spring steel
• Laser engraved
• Easy identification

click to enlarge
(click to enlarge)

Front anti-roll bar for GTX, 2.8mm thick. Laser-engraved for easy identification.

Anti-roll bar wires of different thickness are optionally available for fine-tuning the set-up of your XB8 & GTX cars.

Fits: GTX, XB8 & XT8 cars.



click to enlarge
(click to enlarge)

#352134 GT Front Upper Arm

• Lower caster angle
• Increases steering
• Less tire wear
• Improves handling

click to enlarge
(click to enlarge)

Front upper suspension arm for GTX and GTXE made from super-tough, high-tech composite material. Specifically designed for the GT platform, featuring a lower caster angle that provides more steering and less tire wear. More precise steering in corners. A •must have• option part for every GT racer who wants to significantly improve the handling of their car.

Fits: GTX and GTXE.



click to enlarge
(click to enlarge)

#355819 Alu Pinion Gear - Hard Coated 19T
#355820 Alu Pinion Gear - Hard Coated 20T
#355821 Alu Pinion Gear - Hard Coated 21T
#355822 Alu Pinion Gear - Hard Coated 22T
#355823 Alu Pinion Gear - Hard Coated 23T
#355824 Alu Pinion Gear - Hard Coated 24T

• High-performance pinions
• Lightweight aircraft duraluminum
• Ultra-true running
• Vibration-free operation
• Individually run-in
• Manually inspected


click to enlarge
(click to enlarge)

High-strength pinion gear made from tough 7075 T6 aluminum and specially hardcoated for superior strength, light weight, and high durability. Created on a special gear machine, all pinions feature ultra-precise tooth shaping and ultra-true running for vibration-free operation. Fine internal threading allows easy installation. Each pinion is fine etched with the tooth number for quick & easy identification.

click to enlarge
(click to enlarge)

Fits: GTXE cars.



click to enlarge
(click to enlarge)

#351222 GT Foam Bumper • Light

• Protects car in hard impacts
• Lightweight version
• High-density foam
• Super strong

click to enlarge
(click to enlarge)

Lightweight version of GTX8 front bumper. High-density front bumper cut from specially-developed lightweight closed-cell foam material. Very light, weights 19 g less compare to 351220 GT Foam Bumper, yet very strong. Protects front of car in hard impacts.

Fits: GTX8.



click to enlarge
(click to enlarge)

#353281 GT Graphite Braces for Rear Composite Brace - Set

• Reinforcement
• Stiffening
• For high-traction tracks
• Easy installation
• High-grade graphite

click to enlarge
(click to enlarge)

Reinforcement braces for rear composite brace, stiffen the composite brace and chassis for high-traction tracks.

Fits: GTX8 and XT8'17.




click to enlarge
(click to enlarge)

#359730 GT Body with Wing for 1/8 On-Road GT

• High-quality Lexan• material
• High-downforce areas
• Side downforce areas for stability
• Low-profile
• Aerodynamic
• Perfect fit
• Durable
• Wing included

click to enlarge
(click to enlarge)

XRAY•s self-designed GTX8 body • made from high-quality Lexan• material • features high-downforce areas: front windscreen for proper airflow, and side downforce areas for higher stability. The high-performance, low-profile aerodynamic body was designed by XRAY to perfectly fit the GTX8. The rear part of the body includes 3 wing struts for added durability; a high-strength wing is included.

Fits: GTX8 car.

 
  1/2