xrayxrayHome XRAY homeXRAY X-shopXRAY X-forumRCAmerica
supportsearchcontactguestbooksite map
newsproductsaboutusworldwide headlines

 
click to enlarge
(click to enlarge)

Check the option parts that Toshihiko Hara has been using at his XRAY T4. Toshihiko explains also the benefit of each part, for which track conditions they should be used and what performance improvement you will experience.

click to enlarge
(click to enlarge)

#301007 T4'21 Alu Extra Flex Chassis 2.0mm
>>> The extra flex chassis improves overall performance when used on indoor asphalt and carpets. It is more stable than carbon chassis.

click to enlarge
(click to enlarge)

#302063-K T4 Alu Adjustment Ball-Bearing Hub
>>> I use this hub as the diff bearing can be smoothly rotated without stress when chassis flexes.

click to enlarge
(click to enlarge)

#305436 Low Friction Kevlar Drive Belt 3x351mm
>>> This belt increases total grip on all corners.

click to enlarge
(click to enlarge)

#302525-K Alu Dual Servo Saver Arm + Ball-Bearings
>>> I use this arm to improve steering response and to get more direct feeling at the start of each corner.

click to enlarge
(click to enlarge)

#301351-O Alu Adjustable Body Post Stop
>>> The body post stop helps me to achieve easy height adjustment of body. It is a must have for me.

click to enlarge
(click to enlarge)

ECS BB Drive Shaft 52mm - Set & Adapter
#305138 Adapter
#305308 Drive Shaft
>>> The BB drive shaft and adapter improve cornering performance.

click to enlarge
(click to enlarge)

#305351 Alu Wheel Hub - Offset "-0.75mm"
>>> I use this hub in front of my car to get smoother handling of the car.

click to enlarge
(click to enlarge)

#301210 Graphite Bumper Upper Holder 2.5mm for Adj. Body Mounts
>>> The body mounts reduce bending of body posts during crash

click to enlarge
(click to enlarge)

Composite C-Hub for Body Upstop - 4° Deg. - Graphite
#302383-G Right
#302384-G Left
>>> The composite upstops provide better steering response. They are very effective on tracks with many corners.

click to enlarge
(click to enlarge)

#301961 T4 ULP Graphite Shock Tower Front 3.0mm - Low
>>> I use this shock tower on high grip tracks