| TECH TIP: Reinforcing Rear Hub Camber Link Holes |
|
| To prevent the rear upright screw holes from breaking in a serious crash, thread an M3x5 setscrew into the hole beside the hole used for the camber link screw. |
|
(click to enlarge) |
|
|
|
1. Remove the camber link screw.
|
|
(click to enlarge) |
|
|
|
2. Install an M3x5 setscrew into the adjacent hole.
|
|
(click to enlarge) |
|
|
|
| 3. Reconnect the camber link to the rear upright. |
|
