xrayxrayHome XRAY homeXRAY X-shopXRAY X-forumRCAmerica
supportsearchcontactguestbooksite map
newsproductsaboutusworldwide headlines

 
XRAY presents authentic option parts for XRAY XRAY T4F & X4F cars:

click to enlarge
(click to enlarge)

##301014 X4F'24 Alu Flex Chassis 2.0mm - Swiss 7075 T6

• Makes the car easier to drive & more stable in high traction carpet conditions
• Special cut outs for optimal flex characteristics
• 84mm wide
• Fits X4F'24
• 2mm alu Swiss 7075 T6

click to enlarge
(click to enlarge)

Alu flex chassis is recommended for high traction carpet tracks. Makes the car easier to drive and more stable in high traction condition and avoids traction rolling. Chassis is 2mm thick, made from 7075 T6 aluminum and features special cut outs for optimal flex characteristics. The ultra-narrow chassis is only 84mm wide and features special cut outs that provide the chassis flex characteristics suitable for a wide variety of the traction levels. The bottom of the chassis is shaped to reduce contact between the chassis and the ground while turning to improve cornering speed.





click to enlarge
(click to enlarge)

#301080 X4F'24 Graphite Upper Deck 2.0mm

• One piece top deck for multiple flex adjustments
• Provides higher flex than two-pieces top deck
• Suggested for low traction conditions
• 8 different flex adjustment points
• Easy installation & removal of the spur gear
• 2mm graphite
• Fits X4F’24

click to enlarge
(click to enlarge)

The one piece Multi-Flex™ top deck has a narrow shape for easier installation, improved handling characteristics and features 8 different flex options.

The one piece top deck offers increased flex which makes the car softer. Suggested especially for low traction conditions where it removes a bit of initial steering but generates more traction.

The top deck can be cut to provide more different flex set-up options.

The machined ultra-precise top deck screws ensure the top deck is mounted completely tweak-free to improve the flex characteristics.

Machined from 2.0mm graphite material, the shape of the top deck has been specifically designed to achieve maximum traction and great steering characteristics at the same time.

Fits X4F’24





click to enlarge
(click to enlarge)

#301016 X4F Alu Flex Chassis 2.0mm

• Makes the car easier to drive & more stable in high traction carpet conditions
• Special cut outs for optimal flex characteristics
• 84mm wide
• Fits X4F'23
• 2mm alu Swiss 7075 T6


click to enlarge
(click to enlarge)

Alu flex chassis is recommended for high traction carpet tracks. Makes the car easier to drive and more stable in high traction condition and avoids traction rolling. Chassis is 2mm thick, made from 7075 T6 aluminum and features special cut outs for optimal flex characteristics. The ultra-narrow chassis is only 84mm wide and features special cut outs that provide the chassis flex characteristics suitable for a wide variety of the traction levels. The bottom of the chassis is shaped to reduce contact between the chassis and the ground while turning to improve cornering speed.



click to enlarge
(click to enlarge)

#301075 X4F Graphite Upper Deck - Split Front - 2.0mm
301076 X4F Graphite Upper Deck - Split Rear - 2.0mm

• 2 different top deck alternatives
• Various flex settings
• Premium carbon fiber material
• Fits X4F



click to enlarge
(click to enlarge)

Front part of the split upper deck. The split (2 piece) top deck is recommended mainly for asphalt tracks. The top deck features milled holes for special tweak-free top deck screws. The top deck offers more steering response, and more on power steering. The flex characteristic is different than the kit top deck, and the 2 pieces allows for more flex options, which can be adjusted individually between the front and rear.

Machined from 2.0mm graphite material, the shape of the top deck has been specifically designed to achieve maximum traction and great steering characteristics at the same time.



click to enlarge
(click to enlarge)

The top deck can be connected to the motor mount using these alternatives:

1.) Soft setting - Only one rear screw is used. This allows maximum flex and provides maximum steering. However, the car is less stable on-power.

2.) Stiff setting - Both screws are used. This setting gives reduced flex, rotation is decreased. This setting provides maximum stability and makes the car easier to drive.