xrayxrayHome XRAY homeXRAY X-shopXRAY X-forumRCAmerica
supportsearchcontactguestbooksite map
newsproductsaboutusworldwide headlines


The XRAY T1 is arguably the most advanced 1/10-scale on-road electric
touring car ever made for racing.

You chose the T1 because you recognize the outstanding quality of design, craftsmanship and performance of this touring car chassis. The XRAY T1 is the epitome of high-performance engineering that was built for the purpose of top competition races. The design was focused on the blending of extraordinary materials with race car lineage to offer a responsive ride, luxurious elegant design, the finest quality, and the best track performance.

This car was built purely for top competition races, and for that purpose, we gave the T1 the highest number of adjustments possible to get the most performance out of any track condition. But even with the standard setup, the T1's handling is stable and predictable enough on most surfaces for even novice drivers who choose the T1 as their entrance into the R/C hobby. Every aspect of the T1 was examined not only to make it the best touring car on the market, but to also make it very easy to build, to work on, and to drive. This instruction manual strengthens our philosophy of providing our customers with only the best.

The assembly steps are illustrated with state-of-the-art rendered 3D models taken from our engineers' graphics workstations, and supported with clear and easy-to-understand descriptions of the assembly steps. Because suspension tuning can be a difficult step that is often the subject of heated debates, we have produced a special Set-up Book to help you get your car to its maximum performance. In some of the assembly steps, references are made to a particular section of the set-up procedure. The measurements should be applied immediately, although it will still be necessary to perform the complete set-up procedure again for fine tuning once the chassis is finished.

At the beginning of each section, there is an exploded view of the assembly for that section, including the part numbers you will use for those steps. All non-relevant and previously assembled parts have been faded. Each section indicates what bag should be used. All the hardware (screws, nuts, bearings, pins, clips, etc.) can be compared to true-to-scale diagrams on the left side in each assembly step. There should no parts left over after you finish the given assembly section. If there are any left, please go through the assembly steps again to make sure there are no problems.

We have made every effort to make the instructions and set-up book as easy to understand as possible. However, if you do have any difficulties, problems, or questions, please do not hesitate to contact the XRAY support team at: [email protected] Also, do not forget to visit our web site: www.teamxray.com On our official web site you can find all the latest updates, hot setup information, lists of hop-up parts, and many other goodies.

As the proud owner of a T1, you are cordially invited to join TEAM XRAY. Use the MEMBERSHIP CARD and register your own personalised X-NET at www.teamxray.com Also, you can register your T1 on the RC portal www.myTSN.com --- we intend on really taking care of our customers.

Thank you very much for choosing the XRAY T1 as your ultimate 1/10 electric touring car. We are sure it will bring you lots of enjoyment and REAL racing excitement.

(click to enlarge)

  next chapter 
Instruction Sections
   0. Kit  
   1. Front & Rear Differential  
   2. Rear Transmission  
   3. Rear Suspension  
   4. Front Transmission  
   5. Front Suspension  
   6. Servo Saver  
   7. Shock Absorbers  
   8. Rear Final Assembly  
   9. Front Final Assembly  
   10. Servo Saver, Battery Holder & Upper Deck Assembly  
   11. Accessory Installation