 |
 |
| Composite Chassis |
|
 |
| |
|
|
This chassis is made from an extraordinary new composite material for light weight, excellent rigidity and toughness, and unique memory effect that returns the chassis to its original shape even after sustaining deforming impacts. If you are using the composite chassis with an XRAY T1 or XRAY T1 Evo2, please note the following:
A. Minor Modification Required
You must perform a small modification to the chassis to properly mount the lower suspension pin holders with aluminum nuts to the front bulkheads.
On the area indicated in the image, please use a file or a moto-tool to carefully remove a small amount of material from both sides of the inner channel of the chassis as shown. This will allow the alu. nut to be used without touching the chassis. Be careful not to remove too much material so you do not make a hole in the chassis.
Be sure to use proper eye and hand protection when working with tools! |
(click to enlarge) |
|
|
|
B. Battery Mounting |
| The alu and graphite battery mounts that come standard with the T1 and T1 EVO2 kits will not fit on the composite chassis. You must use the #306105 Composite Battery Mounting Set. |
| Publication Sections |
 |
|
|
|
|
|
|
