| Dimensions |
| Class: |
1/10 electric touring car |
| Width: |
189 mm |
| Length: |
372 mm |
| Wheelbase: |
adjustable 257 - 261 mm |
| Weight: |
560 g |
| Ready-to-run weight: |
1380 g |
| Chassis: |
| Chassis: |
machined 2.5 mm laminated carbon graphite |
| Upper deck: |
machined 2.5 mm laminated carbon graphite |
| Shock towers: |
machined 2.5 mm laminated carbon graphite (front + rear) with multiple shock mounting and camber link roll center positions |
| Body: |
not included, uses 190 mm type |
| Drive Train: |
| Type: |
dual belt |
| Main layshaft: |
alu solid main layshaft |
| Primary: |
pinion/spur |
| Drive ratio: |
1.7 |
| Drive shafts: |
lightweight constant-velocity driveshafts with lightweight integrated hex hubs |
| Front axle: |
XRAY Multi-Diff (one-way/one-way solid/full-time solid axle); Ball Differential (US kits only) |
| Rear differential |
lightweight sealed ball differential with carbide balls and axial thrustbearing |
| Belts: |
ultra-thin belts |
| Bearings: |
rubber covered high-speed bearings |
| Suspension: |
| Front: |
short lower wishbone C-hub / camber link |
| Rear: |
short lower wishbone C-hub / camber link |
| C-blocks: |
3° caster blocks |
| Shocks: |
XRAY 4-step externally adjustable, oil-filled, coil-over shocks |
| Geometry: |
| Camber: |
adjustable front + rear |
| Caster: |
3° static (optional 0°, 1.5°, 4.5° or 6°) |
| Toe-in: |
adjustable front + rear |
| Downstops: |
adjustable front + rear |
| Front anti-dive: |
adjustable 0° or 3° |
| Rear anti-squat: |
adjustable 0° or 3° |
| Anti-roll bars: |
optional front + rear |
| Ackermann: |
adjustable, two positions on both steering blocks |
| Steering: |
ball-bearing supported center-point steering with built-in servo saver |
| Other: |
| Wheels: |
HUDY 24 mm wheels |
| Tires: |
non included |
| Instructions: |
full-color manual with 3D graphics |
| Set-up book: |
HUDY Set-up Book (over 56 pages and more than 140 photos) |
| Packaging: |
carton box with vinyl bags with parts, preassembled chassis |
| Additionally included: |
Authentication Certificate, set-up sheet, parts list, option parts list, decals |
| Not included: |
radio system (transmitter and receiver), steering servo, motor, pinion gear, battery pack (6 cell), speed controller, charger, 1/10-scale bodyshell (190 mm), tires, inserts, high-strength fibre tape, double-sided tape, CA glue, bearing oil, medium-grade (blue) threadlock |
