| Dimensions |
| Length: |
574 mm |
| Chassis length: |
452 mm |
| Width: |
428 mm front; 430 mm rear |
| Wheelbase: |
380~384 mm |
| Weight: |
2384 g |
| Ready-to-run weight: |
3732 g |
| Chassis |
| Chassis: |
CNC-machined Swiss T6 7075 hardcoated aluminum |
| Radio tray: |
CNC-machined 2.5mm graphite |
| Front upper deck: |
CNC-machined 2.5mm graphite |
| Central diff upper deck: |
CNC-machined 2.5mm graphite |
| Braces: |
Composite braces (front / rear) |
| Suspension |
| Type: |
Fully adjustable suspension featuring I.S.S. (Integrated Suspension Settings™ ) |
| Rear supension: |
Lower H-arm with adjustable upper camber link |
| Front suspension: |
C-hub suspension with I.A.C. (Integrated Adjustable Caster™) |
| Damping: |
15.3mm big-bore machined aluminum threaded shock bodies hard coated with protective rubber folding shock boots, oil-filled coil-over with 3.5mm shafts |
| Drivetrain |
| Type: |
Full-time shaft-drive 4WD w/ center differential |
| Primary: |
Steel spur gear / clutch bell |
| Drive shafts: |
CVD drive shafts - Hudy Spring Steel™ |
| Differentials: |
Sealed, 6 gear, silicone-filled |
| Clutch: |
Aluminum 3-shoe |
| Gearing |
| Pinion/Spur: |
10/43 |
| Primary Ratio: |
4.3:1 |
| Internal Ratio: |
3.69:1 |
| Final Gear Ratio: |
15.88:1 |
| Body, Tires & Wheels |
| Body: |
XRAY XT8 body |
| Tires: |
Not included |
| Wheels: |
Not included, standard 17mm hub |
| Fuel tank: |
150cc capacity with hypertonic tank lid and internal stone-type filter and new fuel tank pressure cap with 1-piece profiled seal |
| Adjustment Possibilities |
| |
Camber, Caster, Toe-in, Front Inboard Toe-out, Wheelbase, Front Anti-dive, |
| Also Included |
| Universal tool: |
For all nuts, turnbuckles and shock clips |
| Items Not Included |
|
| |
Engine, Exhaust system, Electronics (Radio, Receiver, Servos, Batteries), Wheels, Tires, Tools, Wheel tool, Receiver battery, Fuel, Switch, Start box, Glow heater, Paint, Charger, Universal tool for all nuts and turnbuckles |
