xrayxrayHome XRAY homeXRAY X-shopXRAY X-forumRCAmerica
supportsearchcontactguestbooksite map
newsproductsaboutusworldwide headlines
click to enable quick search
 
XRAY T4'20 - Graphite Edition
#300026

High-tech Luxury 1/10 Electric Touring Car
??? New centralized drivetrain
??? New motor/layshaft position
??? New 7mm longer front and rear suspension arms
??? Super low anti-roll bar mounts to lower the vehicle CG
 



XRAY T4'20 - Alu Edition
#300027

High-tech Luxury 1/10 Electric Touring Car
??? New centralized drivetrain
??? New motor/layshaft position
??? New 7mm longer front and rear suspension arms
??? Super low anti-roll bar mounts to lower the vehicle CG 



XRAY T4F
#300200

High-tech Luxury 1/10 FWD Electric Touring Car
• Pure racing design, premium luxury quality, highest performance
• Premium, exclusive, and high-tech materials used throughout
• Based on T4 platform
 



T4 2021 - Graphite Conversion Set
#300946

Conversion set for T4'20 to convert it to the T4’21 Graphite edition.  



T4 2021 - Alu Flex Conversion Set
#300947

Conversion set for T4'20 to convert it to the T4'21 Alu Flex edition.  



T4 2021 - Alu Solid Conversion Set
#300948

Conversion set for T4'20 to convert it to the T4'21 Alu Solid edition. 



T4'21 Graphite Chassis 2.2mm
#301004

T4'21 Graphite Chassis is suitable for asphalt tracks and low to medium traction carpet tracks.
 



T4'21 Alu Solid Chassis 2.0mm - Swiss 7075 T6
#301005

 



T4'21 Alu Flex Chassis 2.0mm - Swiss 7075 T6
#301006

T4'21 Alu Flex Chassis is suitable for typical carpet tracks and high traction asphalt tracks. 



T4'21 Alu Extra Flex Chassis 2.0mm - Swiss 7075 T6
#301007

Aluminum T4'21 chassis with special cutout openings for increased flex.  



T4'21 Graphite Upper Deck 2.0mm
#301062

The redesigned top deck works with the center layshaft location in the middle of the chassis. 



T4'21 Graphite Upper Deck 1.6mm
#301063

Thinner 1. 6mm graphite top deck is recommended for use in low- to medium-traction conditions with the alu chassis. 



Composite Bumper Upper Holder Brace
#301207

Front upper bumper brace prevents chassis damage in serious crashes.  



T4F'21 Foam Bumper for 170g Weight - Hard
#301236

High-quality front foam bumper for 170g weight 



Graphite Body Backstop 2.0mm (2)
#301391

Body backstops are mounted into the modified C hubs and allows to adjust the height when the body touches the graphite stops. 



Alu Steering Blocks with Graphite Extension Plates - Set
#302202

Alu steering blocks with ultra-strong construction provides very long life and durability in even the most extreme racing conditions. 



Composite C-Hub for Body Upstop Right - 4 Deg. - Medium
#302363-M

Modified C-hubs with holes for mounting graphite body upstop with height adjustable position to control when the body touches the graphite stops 



Composite C-Hub for Body Upstop Left - 4 Deg. - Medium
#302364-M

Modified C-hubs with holes for mounting graphite body upstop with height adjustable position to control when the body touches the graphite stops. 



Composite C-Hub for Body Upstop Right - 4 Deg. - Graphite
#302383-G

 



Composite C-Hub for Body Upstop Left - 4 Deg. - Graphite
#302384-G

Modified C-hubs with holes for mounting graphite body upstop with height adjustable position to control when the body touches the graphite stops. 



Alu Dual Servo Saver Arm - Black + Ball-Bearings (2)
#302525-K

Set of 2 left & right identical alu arms for dual servo saver 



Alu Dual Steering Arm Screw M3x7 - Swiss 7075 T6 (2)
#302590

Aluminum screw removes excessive radial play of the steering to improve the steering precision.  



Adj. Steering Rod L/R 35mm - Hudy Spring Steel (2)
#302611

Set of two adjustable turnbuckles, manufactured from world-renowned top-secret "Hudy Spring Steel". Used for front upper suspension links of C-hub suspension. 



Adj. Steering Rod 20mm - Hudy Spring Steel (2)
#302630

Set of two adjustable steering rod turnbuckle, manufactured from world-renowned top-secret "Hudy Spring Steel". 



T4'21 Alu Lower Adjustment Bulkhead Front R/Rear L
#302768

Bulkheads are refined with improved rear arm clearance when using the high roll center positions without rear arm modification. 



T4'21 Alu Lower Adjustment Bulkhead Front L/Rear R
#302769

Bulkheads are refined with improved rear arm clearance when using the high roll center positions without rear arm modification. 



Alu Belt Tensioner Bushing
#303076

Alu belt tensioner bushing has high durability for less wear, eliminates play even after many hours of use.  



Alu Shim 3x6x1.0mm (10)
#303122

Alu shims 3x6mm size, 1mm thick. Silver color, set of 10. 



Alu Shim 3x6x1.0mm - Orange (10)
#303122-O

Alu shims 3x6mm size, 1mm thick. Orange color, set of 10. 



Alu Shim 3x6x2.0mm (10)
#303123

Alu shims 3x6mm size, 2mm thick. Silver color, set of 10. 



Alu Shim 3x6x2.0mm - Orange (10)
#303123-O

Alu shims 3x6mm size, 2mm thick. Orange color, set of 10. 



Alu Shim 3x6x5.0mm (10)
#303126

Alu shims 3x6mm size, 5mm thick. Set of 10. 



Alu Shim 3x6x4.0mm (10)
#303127

Alu shims 3x6mm size, 4mm thick. Set of 10. 



Alu Shim 3x5x4.0mm (10)
#303144

Alu shims 3x5mm size, 4mm thick. Set of 10. 



Alu Anti-Roll Bar Bushing - Black (2)
#303432-K

Alu bushing for ball-bearing anti-roll bar system. 



Composite Ball Joint 4.9mm - Extra Short Open (4)
#303457

Set of four molded composite open ball joints. 



T4'20 Alu Rear Lower 2-Piece Suspension Holder - Front (1)
#303730

Alu rear lower suspension holder for the front of rear bulkhead, CNC-machined from black anodized premium Swiss 7075 T6 aluminum.  



T4'21 Alu Rear Susp. Holder with Centering Pin - Front (1)
#303732

Alu rear lower suspension holder with Centering Pin - Front, ... 



T4'21 Alu Motor Mount
#303759

Alu motor mount is machined as a single piece and now features an integrated belt tensioner to control the rear belt tension more precisely. 



T4'21 Alu Chassis Brace - 7075 T6
#303764

Alu chassis brace makes the car more stable, generates more rear traction and allows chassis flex adjustments to alter steering characteristics by adding and removing screws from the brace. 



T4'21 Brass Chassis T-Brace 10g
#303765

Brass chassis T-brace designed for T4’21 makes the car more stable,  



Alu Gear Diff CVD BB Driveshaft Adapter - Swiss 7075 T6 (2)
#304972

CNC-machined CVD BB drive shaft adapter for XRAY Differential 



Solid Axle Driveshaft Adapter - HUDY Spring Steel (2)
#305134

CNC-machined drive shaft adapters for XRAY Composite Solid Axle, made from HUDY Spring Steel. Set of 2. 



Solid Axle ECS BB Driveshaft Adapter - HUDY Spring Steel (2)
#305138

CNC-machined ECS BB drive shaft adapter for XRAY Solid Axle, made from HUDY Spring Steel. 



ECS BB Drive Shaft 52mm - Set - HUDY Spring Steel
#305308

The ECS BB (Ball-Bearing) driveshafts offer a significant performance gain over the standard blade-type driveshafts.  



ECS BB Drive Shaft 53mm - Set - HUDY Spring Steel
#305309

The ECS BB (Ball-Bearing) driveshafts offer a significant performance gain over the standard blade-type driveshafts 



CVD BB Drive Shaft 50mm - HUDY Spring Steel (2)
#305339

Replacement CVD BB drive shaft 50mm made from world-renowned HUDY Spring Steel. 



CVD BB Drive Shaft 50mm - Set - HUDY Spring Steel
#305409

The CVD BB - bearing drive shafts improve off-power steering and rotation 



Composite Fixed Pulley for Layshaft w Bearings 20T - Graphite (2)
#305578-O

Precision-molded 20T layshaft pulley made of specially-formulated graphite composite material that is a perfect balance of reliability and performance.  



Composite Adjustable Battery Holder & Backstop (2+2)
#306192

Composite Adjustable Battery Holder & Backstop offer simply and secure battery installation without tape and without adverse effects on chassis flex. 



XRAY Pure Tungsten Chassis Weight 12g
#306551

Machined 12g pure tungsten chassis weight. The weights are smaller than the brass weights and are easier to install with a cleaner layout.  



Alu Shock Adjustable Nut - Black (2)
#308042-K

Alu spring-tension adjusting nut. Black color. Set of 2.  



ULP Alu Shock Adjustable Nut V2 - Black (2)
#308044-K

Alu spring-tension adjusting nut for ULP shock absorbers. 



Alu Shock Cap-Nut with Vent Hole - Black (2)
#308352-K

CNC-machined alu upper shock cap for shock body made from premium lightweight Swiss 7075 T6 aluminum.  



Alu Shock Cap Nut with Vent Hole - Black (2)
#308353-K

Machined alu upper shock cap for T4 SLP aluminum shock absorbers. Black color. Set of 2. 



ULP Alu Shock Cap Nut with Vent Hole - Black (2)
#308354-K

Machined alu upper shock cap for T4 ULP aluminum shock absorbers. Black color. Set of 2. 



T4F'21 Balancing Bumper Weight Front 170g & Foam Bumper
#309823

Front 170g bumper weight is developed and suggested for low to medium conditions on the asphalt and it works as a direct replacement for the kit 30g weight and bumper 



XRAY XB2D'20
#320007

Luxury 1/10 Electric 2WD Off-Road Buggy
• All-new chassis with bent sides
• All-new super-narrow ultra-low CG gearboxes
• All-new diff height adjustment
• All-new super narrow ball-differential 



XRAY XB2C'20
#320008

Luxury 1/10 Electric 2WD Off-Road Buggy
• All-new chassis with bent sides
• All-new super-narrow ultra-low CG gearboxes
• All-new diff height adjustment
• All-new super narrow ball-differential 



XRAY XT2C'19
#320202

Luxury 1/10 Electric 2WD Stadium Truck
??? All-new narrower gear box
??? All-new aluminum rear suspension holders
??? All-new rear multi-function rear upright
??? All-new rear longer driveshafts
??? All-new gear diff outdrives 



XRAY XT2D'19
#320203

Luxury 1/10 Electric 2WD Stadium Truck
??? All-new narrower gear box
??? All-new aluminum rear suspension holders
??? All-new rear multi-function rear upright
??? All-new rear longer driveshafts
??? All-new gear diff outdrives 



XRAY XB2'21 Upgrade for Carpet & Dirt
#320902

Limited-quantity upgrade set to convert your XB2'20 kit into the Carpet or Dirt version of new XB2'21.  



XB2 Alu Chassis with Bent Sides - Swiss 7075 T6 (2.5mm)
#321107

Alu chassis made from custom-produced 2.5mm Swiss 7075 T6 aluminum.  



XB2 Alu Chassis with Bent Sides - Long - 7075 T6 (2.5mm)
#321108

Alu chassis made from custom-produced 2.5mm Swiss 7075 T6 aluminum.  



SCX Alu Chassis with Bent Sides - 7075 T6 (2.5mm)
#321110

The chassis features bent sides for improved weight balance and increased traction with maximum stability of the car. The rear part of the chassis is narrow. 



SCX Composite Front & Rear Bumpers (1+2)
#321201

Real looking Short Course front & rear bumper protects the front and rear of the car in a serious crash. Set of 1+2. 



SCX Composite F & R Bumper Braces + Side Guards (2+1+2)
#321202

Composite braces to make front and rear bumper stronger and less flex when hitting bumps. Set of 2 front & 1 rear brace & 2 side guards. 



SCX Alu Front Brace Post 17mm (2)
#321240

Alu bushings to fit front brace together with upper top deck. Set of 2. 



SCX Graphite Front Bumper Brace 2.2mm
#321241

Graphite front bumper brace made from 2.2mm premium-grade graphite material.  



SCX Composite Chassis Side Guards for Bent Sides Chassis L+R
#321252

Molded tough composite chassis side guards perfectly fit the chassis with bent sides.  



SCX Graphite Rear Body Holders Adapter 2.2mm (2)
#321322

Graphite rear body holders adapter made from 2.2mm premium-grade graphite material allows to move frontward or rearward body post according body design. 



Composite Front Roll-Center Holder - Wide - Hard
#322044-H

WIDE - HARD composite front roll-center holder with extra mounting hole more outside reduce diving effect in high speed corners.  



XB2 Graphite Shock Tower - 4-holes - Front - 3.5mm
#322083

Front shock tower CNC-machined from extra-thick 3.5mm premium-grade graphite for light weight and strength.  



Composite LSM Susp. Arm Front Lower Right - Hard
#322113-H

Front lower RIGHT suspension arm made from super-tough high-tech composite material suitable for most track conditions.  



Composite LSM Susp. Arm Front Lower Left - Hard
#322123-H

Front lower LEFT suspension arm made from super-tough high-tech composite material suitable for most track conditions.  



XB2 Anti-Roll Bar Front 1.0mm Set
#322400

Anti-roll bar set 1.0mm made from special spring steel material. 



XB2 Front Anti-Roll Bar 0.8mm
#322458

Front anti-roll bar made from special spring steel material. 



XB2 Front Anti-Roll Bar 1.0mm
#322460

Front anti-roll bar made from special spring steel material. 



XB2 Front Anti-Roll Bar 1.1mm
#322461

Front anti-roll bar made from special spring steel material. 



XB2 Front Anti-Roll Bar 1.2mm
#322462

Front anti-roll bar made from special spring steel material. 



Composite Steering Arm with Steering Mount Hole (2)
#322514

Composite steering arm with steering mount hole is a part of Fully Adaptive Steering System allows easy changes to the steering assembly that transform the geometry and alter the handling characteristics. 



Comp. Steering Arm with Steering Mount Hole - Graphite (2)
#322514-G

Composite steering arm with steering mount hole is a part of Fully Adaptive Steering System allows easy changes to the steering assembly that transform the geometry and alter the handling characteristics.  



Composite Steering Plate - Front/Rear Mounting Positions
#322573

Composite steering plate is a part of Fully Adaptive Steering System allows easy changes to the steering assembly that transform the geometry and alter the handling characteristics.  



Composite Steering Plate - F/R Mounting Positions - Graphite
#322573-G

Composite steering plate is a part of Fully Adaptive Steering System allows easy changes to the steering assembly that transform the geometry and alter the handling characteristics.  



Alu Shim 3x4.7x1.0mm (10)
#322590

Alu shims 3x4.7mm size, 1mm thick. Set of 10. 



SCX Alu Rear Roll-Center Holder Adapter for Anti-Roll Bar
#323045

Alu adapter to fit rear bumper together with rear roll center holder. 



XT2 Composite Shock Tower Rear - LCG - Hard
#323085-H

Rear shock tower molded from premium, tough composite material generates more traction than the graphite shock tower.  



XB2 Graphite Shock Tower - 4-holes - LCG - Rear - 4.0mm
#323089

CNC-machined rear shock tower made from 4.0mm thick premium-grade graphite material for incredible strength and long lifespan. 



Composite Disengaged Susp. Arm Rear Lower Right - Hard
#323113-H

Rear lower RIGHT suspension arm with redesigned geometry for improved consistency and handling.  



Composite Disengaged Susp. Arm Rear Lower Left - Hard
#323123-H

Rear lower LEFT suspension arm with redesigned geometry for improved consistency and handling.  



Graphite Motor Plate - LCG - 3.0mm
#324017

Lightweight graphite motor plate for LCG gearbox lowers CG and absorbs vibrations from the motor. The motor plate is CNC machined from premium graphite material.  



Solid Axle - LCG - Super-Lightweight - Set
#324102

Solid axle set includes lightweight axle shaft with 20T pulley, disc carrier, spur gear and hardware 



Composite Adjustment Ball-Bearing Hub 1+2+3 Dots (2)
#324172

Molded composite adjustable ball-bearing hub. Set of 2. 



Ball Adjust. Diff - LCG - Set - HUDY Spring Steel
#325003

Refined and redesigned ball differential for the updated transmission dimensions.  



Ball Diff. Short Output Shaft - LCG - HUDY Spring Steel
#325013

SHORT output shaft for #325003 Adjustable Ball Differential - LCG, made from world-renowned HUDY Spring Steel 



Drive Shaft 96mm with 2.5mm Pin - Spring Steel
#325314

CNC-machined CVD rear drive shaft 96mm with 2.5mm pin, made from world-renowned HUDY Spring Stee. Hardened with a proprietary hardening process, the drive shafts provide unbeatable lifespan and reliability. 



Body for 1/10 2WD Off-Road Buggy - Gamma 2D
#329710

XB2 Gamma 2D body is designed especially for low traction tracks.  



Body for 1/10 2WD Off-Road Buggy - Gamma 2D - Light
#329711

Ultra-lightweight version of the XB2 Gamma 2D body is designed especially for low traction conditions.  



Body for 1/10 2WD Off-Road Buggy - Gamma 2C
#329712

XB2 Gamma 2C body is designed especially for carpet high traction tracks.  



Body for 1/10 2WD Off-Road Buggy - Gamma 2C - Light
#329713

Ultra-lightweight version of the XB2 Gamma 2C body is designed especially for high traction conditions. 



2WD Front Wheel Aerodisk with 12mm Hex IFMAR - White (10)
#329900-M

 



XRAY NT1.2
#330015

High-tech Luxury 1/10 Nitro Touring Car
??? All-new chassis
??? All-new rear bulkheads
??? All-new front anti-roll bar system
 



ALU UPPER CLAMP REAR - BLACK - SWISS 7075 T6 - (L+R)
#333039

Aluminum rear upper bulkheads re-designed to work with the 333018 and 333028 rear bulkheads offer increased durability 



Alu Mount 3x6x10.5mm (2)
#333074

CNC-machined alu mount 3x6x10.5mm. Set of 2. 



Alu Lightweight Brake Disk Adapter - Black - Swiss 7075 T6
#334142

For serious racers concentrating on weight savings, XRAY's optional CNC-machined brake disk adapter is CNC-machined from tough 7076 T6 alu, and has been strategically lightened by 30% compared to the standard #334140 adapter.  



XRAY RX8.2
#340007

High-tech Luxury 1/8 Nitro Touring Car
??? All-new narrower chassis
??? All-new lower rear suspension holders
??? All-new front and rear bulkheads
??? All-new anti-roll bar adapters 



RX8E Graphite Belt Tensioner Holder
#343077

Belt tensioner holder made from premium graphite material. 



Alu Extension for Suspension Arm - Rear Lower - 7075 T6 (2)
#343197

Rear lower suspension arm alu extension for use with #343111, #343112, or #343113 composite rear arms. 



Alu Brake Disk Adapter - Lightweight - 7075 T6 - Hard Coated
#344143

CNC-machined brake disk adapter is lightweight 



XRAY XB8'19
#350014

Luxury 1/8 Nitro Off-Road Buggy
• All-new 2-in-1 concept
• All-new C-hub suspension
• Redesigned chassis
• All-new front Pivot Ball steering block
• All-new rear uprights 

Replaced by XRAY XB8'20 



XRAY XB8E'19
#350156

Luxury 1/8 Electric Off-Road Buggy
• All-new 2-in-1 concept
• All-new C-hub suspension
• Redesigned chassis
• All-new front Pivot Ball steering block
• All-new rear uprights 

Replaced by XRAY XB8E'20 



XRAY XT8'19
#350204

1/8 Luxury Racing Truggy
??? All-new front suspension geometry
??? All-new new zero king pin steering block
??? All-new front and rear CVD drive shafts
??? All-new chassis design
??? All-new rear uprights  



XRAY XT8E
#350300

Luxury 1/8 Electric Racing Truggy
??? All-new front suspension geometry
??? All-new new zero king pin steering block
??? All-new front and rear CVD drive shafts
??? All-new chassis design
??? All-new rear uprights  



XRAY GTX8
#350501

High-Competition 1/8 Nitro GT Car
• All-new front & rear diffs
• All-new front upper arm with reduced caster
• All-new harder lower front arms
• All-new chassis
• All-new rear upright 



XRAY GTXE
#350601

High-Competition 1/8 Electric GT Car
??? All-new front & rear diffs
??? All-new front upper arm with reduced caster
??? All-new harder lower front arms
??? All-new chassis
??? All-new rear upright 



XB8E'21 Alu Chassis - Swiss 7075 T6 (3mm)
#351115

The XB8E'21 chassis with both saddle pack and brick version configuration.  



XB8'21 Alu Chassis - Swiss 7075 T6 (3mm)
#351116

The XB8'21 chassis features a locking system for the servo saver posts that ensures the components will stay secured even during chassis flex in extreme conditions.  



Composite Upper Plate with Two Brace Positions
#351350

Composite upper plate with two brace positions and updated holes for servo saver to provide free movement even when is over tight.  



Graphite Upper Plate with Two Brace Positions
#351351

Graphite upper plate with two brace positions is CNC-machined from high-grade carbon graphite 



Steel Eccentric Bushing 0 (2)
#352170

Eccentric bushing for I.A.C. (Integrated Adjustable Caster). 0 setting identified by no dot. Made from famous Hudy Spring Steel. Set of 2.  



Steel Eccentric Bushing 1 - V2 (2)
#352174

Eccentric bushing for I.A.C. (Integrated Adjustable Caster). 1 setting (identified by 1 dot) allows for either +1 or -1 caster adjustment depending on the orientation of the bushing. 



Steel Eccentric Bushing 2 - V2 (2)
#352175

Eccentric bushing for I.A.C. (Integrated Adjustable Caster). 2 setting (identified by 2 dots) allows for either +2 or -2 caster adjustment depending on the orientation of the bushing. 



Alu Caster Block 18° Right - Swiss 7075 T6
#352273

Alu Caster Block 18° Right is CNC-machined from premium Swiss 7075 T6 aluminum. Ultra-strong construction provides long lifespan & durability in even the most extreme racing conditions. 



Alu Caster Block 16 Right - Swiss 7075 T6
#352276

Authentic XRAY RIGHT-side 16 alu caster block is CNC-machined from premium Swiss 7075 T6 aluminum.  



Composite C-Hub 16 Right
#352277

Molded composite C-hub for RIGHT steering block. Made from high-tech composite material. Caster pre-set at 16. For use with matching left-side C-hub #352287.  



Alu Caster Block 6° Right - Swiss 7075 T6
#352278

The Alu C-hubs with 6° caster were specially developed for the GT on-road platform. CNC-machined from premium Swiss 7075 T6 aluminum. Ultra-strong construction provides long lifespan & durability in even the most extreme racing conditions. 



Alu Caster Block 18° Left - Swiss 7075 T6
#352283

Alu Caster Block 18° Left is CNC-machined from premium Swiss 7075 T6 aluminum. Ultra-strong construction provides long lifespan & durability in even the most extreme racing conditions. 



Composite C-Hub 16 Left
#352287

Molded composite C-hub for LEFT steering block. Made from high-tech composite material. Caster pre-set at 16. For use with matching right-side C-hub #352277. 



Alu Caster Block 6° Left - Swiss 7075 T6
#352288

The Alu C-hubs with 6° caster were specially developed for the GT on-road platform. CNC-machined from premium Swiss 7075 T6 aluminum. Ultra-strong construction provides long lifespan & durability in even the most extreme racing conditions. 



Servo Saver with Chassis Lock & Hard Spring - Graphite - Set
#352506

The servo saver features conical spring that is longer and stronger. The conical spring helps to absorbs more strength from track or crash. Makes driving easier on bumpy tracks.
 



Servo Saver Spring Progressive
#352561

 



Adjustable Turnbuckle 45mm M4 L/R - HUDY Spring Steel (2)
#352612

Adjustable left & right M4 turnbuckles manufactured from special HUDY Spring Steel material for turnbuckles, resulting in stronger turnbuckles with a tougher core.  



Adj. Turnbuckle M5 L/R 58mm - Hudy Spring Steel (2)
#352621

Adjustable left & right M5 turnbuckles manufactured from special HUDY Spring Steel material for turnbuckles, resulting in stronger turnbuckles with a tougher core. Additionally heat treated for maximum strength, reliability, and long life. Length of 58mm. Set of 2. 



Adjustable Turnbuckle 46mm M5 L/R - HUDY Spring Steel (2)
#352625

Adjustable left & right M5 turnbuckles manufactured from special HUDY Spring Steel material for turnbuckles, resulting in stronger turnbuckles with a tougher core 



XB8 Composite Rear Upright LB - Hard
#353354-H

Lightweight yet ultra-strong rear upright molded from special HARD composite material. Features larger outside 8x16x5mm ball-bearing for increased reliability and life-span.  



XB8 Composite Rear Wing Holder For Frontward Wing Position
#353525

Super-slim, 1-piece design for reduced weight and increased strength. Made from a special composite mixture to withstand abuse and crashes. 



Steel Brake Pad Laser Cut - Hardened (4)
#354121

High-precision, ultra-efficient steel brake pads are one of the best in the market! The steel brake pads are laser cut and afterwards precisely ground on both sides for an ultra-smooth surface finish that guarantees maximum braking efficiency. This set of exclusive brake pads is additionally hardened to increase the life and provide higher stiffness.  



Front Diff. Outdrive Adapter Long - V2 - HUDY Spring Steel (2)
#355064

Diff outdrive adapter for large front differential #355004, made of HUDY Spring Steel. Special elongated design secures the drive shafts so they do not fall out in heavy jumps. Set of 2.
 



Rear Diff. Outdrive Adapter - V2 - HSS (2)
#355065

Diff outdrive adapters for large rear differential #355005, made of HUDY Spring Steel. 



Active Diff. Outdrive Adapter - Lightweight - HSS (2)
#355163

Lightweight CNC-machined diff outdrive adapters for XB8 Active Diff. 



CVD Drive Axle - Hudy Spring Steel
#355211

CVD drive axle made from world-renown HUDY Spring Steel. Strategically machined for toughness and light weight without compromising strength. 



CVD Universal Drive Shaft - Hudy Spring Steel
#355221

CNC-machined CVD universal drive shaft front/rear suspension made from world-renown HUDY Spring Steel. Strategically-machined, the lightweight drive shaft has been weight-reduced without compromising strength. Hand ground for maximum precision, then individually measured and inspected. The most unique no-compromise off-road drive shafts. 



Universal Drive Shaft - Hudy Spring Steel
#355222

All-new front & rear universal drive shafts are used on the XB8 to generate more traction and have less resistance in the front when maximum steering angle is applied.

 



CVD Universal Drive Shaft 93mm - HUDY Spring Steel
#355223

CNC-machined CVD universal drive shaft 93mm, made from world-renowned HUDY Spring Steel help to reduce the chances of bind in the outdrives after extreme jump landings that could cause handling irregularities or damage.  



CVD Drive Shaft Coupling - HUDY Spring Steel
#355236

CVD drive shaft coupling for CVD drive shafts made from world-renown Hudy Spring Steel, specially hand-ground for maximum precision. 



CVD Drive Shaft Coupling - Hudy Spring Steel
#355237

CVD drive shaft coupling for CVD drive shafts made from world-renown Hudy Spring Steel. Specially hand-ground for maximum precision. 



Alu Wheel Axle Offset +1mm - Hard Coated
#355251

Hardcoated aluminum wheel axle with +1mm offset. Using these wheel axles will increase the overall track width by 2mm, making the car more stable and easier to drive.  



Alu Wheel Axle Offset +2mm - Hard Coated
#355252

Hardcoated aluminum wheel axles with +2mm offset. Using these wheel axles will increase the overall track width by 4mm, making the car more stable and easier to drive. Set of 2. Wheel axles can be mounted in both front and rear. 



Central Dogbone Shaft Universal Joint - HUDY Spring Steel
#355415

Central dogbone shaft universal joint made from HUDY Spring Steel 



Central CVD Shaft Universal Joint - HUDY Spring Steel
#355416

Central CVD shaft universal joint made from world-renown HUDY Spring Steel. Strategically machined for toughness and light weight without compromising strength. Fits front & rear central CVD drive shafts. 



Front Universal Central Drive Shaft - Spring Steel - Set
#355426

Optional front universal central drive shaft, CNC-machined from world-renowned HUDY Spring Steel. Ensures more free movement of the drivetrain and improves traction.

 



Front Central CVD Drive Shaft - HUDY Spring Steel
#355427

CVD front central drive shaft CNC-machined from world-renowned HUDY Spring Steel. Strategically-machined, lightweight drive shaft has been weight-reduced without compromising strength.  



Front Central Dogbone Drive Shaft 85mm - HUDY Spring Steel
#355432

Short 85 mm Front Central Dogbone Drive Shaft CNC-machined from world-renown HUDY Spring Steel 



Rear Central CVD Drive Shaft 115mm - HUDY Spring Steel
#355627

Longer 115 mm CVD rear central drive shaft used with longer chassis #351114 



Rear Central Dogbone Drive Shaft 116mm - HUDY Spring Stee
#355632

Longer 116 mm Rear Central Dogbone Drive Shaft CNC-machined from world-renown HUDY Spring Steel 



XB8E/XT8E Brick Battery Graphite Servo Holder 2.2mm
#356108

Graphite servo holder for brick version. The receiver case is mounted on the same holder as the servo.  



XB8E/GTXE/XT8E Saddle Pack Graphite Servo Holder 2.2mm
#356109

Graphite servo holder for Saddle pack version.  



XB8E/XT8E Composite Battery Plate - Hard
#356152-H

Battery plate for single brick battery pack or two standard battery packs placed next to each other. 



XB8E/GTXE/XT8E Battery Box Standard & Short Battery Pack (2)
#356153

Battery box for saddle pack batteries.  



Composite Speedo Plate
#356154

Composite Speedo Plate for compact electronics mount of speedo when using the saddle pack battery configuration.  



Composite Servo Shims 1.0, 1.5 & 2.5mm (2+2+2)
#356219

Molded composite servo shims for most servo brands. The set includes 2pcs of 1mm, 1.5mm and 2.5mm shims. 



Pivot Ball Camber Alu Shim 6x13x1.5mm (2)
#357257

 



4-Shoe Screw Pin - HUDY Spring Steel
#358499

Easy to install assembly screws for 4-shoe clutch system. Set of 4pcs. 



Flywheel Nut - Hudy Spring Steel
#358550

Tough steel nut for securing flywheel to engine crankshaft. Made from famous HUDY Spring Steel. 



Graphite 125CC Fuel Tank Guard
#358660

Effective fuel tank guard for 125cc fuel tank  



XB8 / XB8E "Eazy" Body
#359713

"Eazy" body makes the car significantly easier to drive.  



XB8 / XB8E "Eazy" Body - Lightweight
#359714

"Eazy" body makes the car significantly easier to drive.  



XRAY XB4'20
#360007

Luxury 1/10 Electric Off-Road Buggy
• All-new longer chassis for improved stability
• All-new super-narrow front & rear gear boxes
• All-new narrow front & rear suspension holders
• All-new front & rear gear differentials 



XRAY XT4
#360200

Luxury 1/10 Electric Off-Road Truggy
• Based on the ultra-successful XB4 platform
• Full compatibility and interchangeable parts
• Designed for highest performance at all levels of racing
• Engineered with attention to smallest details
• Manufactured with legendary artistic craftsmanship from premium European materials 



XB4'20 Alu Chassis - Swiss 7075 T6 (2mm)
#361107

The redesigned longer XB4 chassis increases the stability of the car. Several different areas of the chassis were updated to improve the proper chassis flex. 



XB4'21 Alu Chassis - Swiss 7075 T6 - 2mm
#361109

CNC-machined from high-quality Swiss 2mm 7075 T6 aluminum 



Graphite Rear Body Post Holder
#361189

Graphite rear body post holder holds rear body posts.  



Graphite Rear Chassis Brace Deck 2mm
#361190

Graphite chassis brace fits in the lower part of the rear composite brace connected directly to the chassis,  



Brass Rear Chassis Brace Weight 40g
#361191

Brass chassis brace fits in the lower part of the composite brace connected directly to the chassis 



Composite Chassis Side Guards L+R - Hard
#361269-H

Tough composite side guards perfectly fit the chassis to seal against dirt and protect from side impacts.  



Composite Chassis Side Guards L+R - Medium
#361269-M

Optional medium-hardness side guards are softer than the hard side guards, and are a great tuning part for chassis flex adjustment. 



XB4 Carbon Fiber Chassis Side Guard L+R
#361270

Molded carbon fiber side guards are extremely light with more than a 50% weight reduction compared to standard composite side guards while providing more rigidity. 



Graphite Chassis Brace - Front
#361299

Front graphite chassis T-Brace was designed to increase front stability on high traction tracks which makes the car more predictable and easier to drive 



Diff Bulkhead Block Set Front - Narrow
#362004

Redesigned super-strong FRONT bulkheads are narrower to move the arms more into centerline to generate more traction and to provide a greater range of track width adjustment.  



Diff Bulkhead Block Set Rear - Narrow
#362005

Redesigned super-strong REAR bulkheads are narrower to move the arms more into centerline to generate more traction and to provide a greater range of track width adjustment. 



Diff Bulkhead - Horizontal Split Design (HS) - F/R - Set
#362006

Front & rear bulkheads feature a horizontal split design (HS) to retain easy diff access while adding the valuable new diff height adjustment.  



Graphite Shock Tower for HS Bulkhead - Front - 3.5mm
#362086

Front shock towers are redesigned to accommodate the Horizontal Split Bulkheads (HS), and feature denser upper shock mount positions for more precise set-up adjustments. 



Composite Long Suspension Arm Front Lower - Graphite
#362113-G

Front lower long suspension arm made from graphite material suitable for most track conditions 



Alu Lower Suspension Holder for HS Bulkhead - Front-Front
#362313

Alu lower suspension holder for the FRONT of the front suspension. Redesigned along with the HS bulkheads for an expanded range of set-up adjustments. 



Alu Lower Suspension Holder for HS Bulkhead - Front-Rear
#362323

Alu lower suspension holder for the REAR of the front suspension 



Inline Hub for Bevel Gear - Rear HS Bulkhead - 1+2+3 Dots
#362370

Molded Inline Hub for Bevel Gear in rear HS bulkhead.  



Angled Hub for Bevel Drive Gear - Front HS Bulkhead - 1 Dot
#362371

Front HS bulkheads allow for diff height adjustment using eccentric bushings.  



Angled Hub for Bevel Drive Gear - Front HS Bulkhead - 2 Dots
#362372

Front HS bulkheads allow for diff height adjustment using eccentric bushings.  



Angled Hub for Bevel Drive Gear - Front HS Bulkhead - 3 Dots
#362373

Front HS bulkheads allow for diff height adjustment using eccentric bushings.  



Servo Saver Pivot Shaft +5mm (2)
#362552

Alu servo saver pivot shafts are CNC-machined from high-grade Swiss 7075 T6 aluminum to ensure high strength with ultra-low weight.  



Alu Steering Plate 2-H. - 6mm Profiled Shape - Swiss 7075 T6
#362575

Optimized aluminum steering plate with 6mm profiled shape, CNC-machined from premium Swiss 7075 T6 aluminum 



Graphite Shock Tower for HS Bulkhead - Rear - 3.5mm
#363085

Rear shock towers are redesigned to accommodate the Horizontal Split Bulkheads (HS), and feature denser upper shock mount positions for more precise set-up adjustments. 



Composite Long Suspension Arm Rear Lower Right - Graphite
#363113-G

Completely redesigned rear long suspension arm is 2mm longer, which helps to generate more grip in low traction conditions and improves stability on higher traction surfaces and improves handling on bumpy tracks. 



Composite Long Suspension Arm Rear Lower Left - Graphite
#363123-G

Front lower long suspension arm made from graphite material suitable for most track conditions.  



Alu Lower Suspension Holder for HS Bulkhead - Rear-Front
#363316

Alu lower suspension holder for the FRONT of the rear suspension redesigned along with the new HS bulkheads for an expanded range of set-up adjustments. 



Alu Lower Suspension Holder for HS Bulkhead - Rear-Rear
#363325

Alu lower suspension holder for the REAR of the rear suspension redesigned along with the new HS bulkheads for an expanded range of set-up adjustments. 



XB4 Multi-Adjustable Slipper Clutch (MSC) - Set
#364100

Unique Multi-Adjustable Slipper Clutch – MSC, with independently adjustable FRONT and/or REAR slippage via different slipper pads and clutch plates of different diameter, ensures more efficient and more consistent clutch operation to generate faster acceleration and less wheel spin. 



3-Pad Shaft for Multi-Adjustable Clutch - HUDY Spring Steel
#364115

3-Pad Shaft for Multi-Adjustable Clutch made from HUDY Spring Steel and additionally hardened for extra lifespan and reliability.  



Alu Plate for MSC Clutch - Front - 7075 T6 Hard Coated
#364122

Alu Plate for MSC Clutch - Front is machined from premium Swiss 7075 T6 and additionally hardened and with a black final surface treatment. 



Alu Plate for MSC Clutch - Rear - 7075 T6 Hard Coated
#364123

Alu Plate for MSC Clutch - Rear is machined from premium Swiss 7075 T6 and additionally hardened and with a black final surface treatment. 



Slipper Clutch Pad SLS (3)
#364131

Friction pads for slipper clutch system, made from special high-grip material. Set of 3. 



Slipper Clutch Pad Black - Medium (2)
#364132

Slipper Clutch Pads for slipper clutch system, made from special high-grip material medium hardness. Set of 2. 



Alu Plate for MSC Clutch - Center - 7075 T6 Hard Coated
#364141

Alu plate for MSC clutch for center position is CNC machined from premium Swiss 7075 T6 with a black final surface treatment. 



Outdrive Adapter for MSC Clutch - Rear - HUDY Spring Steel
#364173

Rear Outdrive Adapter for MSC Clutch made from HUDY Spring Steel and additionally hardened for extra lifespan and reliability. With a black final surface treatment. 



Outdrive Adapter for MSC Clutch - Front - HUDY Spring Steel
#364174

Front Outdrive Adapter for MSC Clutch made from HUDY Spring Steel and additionally hardened for extra lifespan and reliability.  



Alu Nut for Multi-Adjustable Slipper Clutch (MSC)
#364191

Alu Nut for Multi-Adjustable Slipper Clutch (MSC) 



Gear Differential - Large Volume - Set
#364903

XB4 gear differential was completely redesigned both in front and rear and features unique split design of the crown gear.  



Steel Bevel Drive Gear for HS Bulkhead - CNC-Machined - 16T
#365127

16-tooth bevel-drive steel gear for front/rear differential.  



Front Drive Shaft 84mm with 2.5mm Pin - HUDY Spring Steel
#365226

CNC-machined 84mm CVD drive shaft with 2.5mm pin made from world-renowned HUDY Spring Steelâ„?.  



Central Drive Shaft 111mm 2.5mm Pin - HUDY Spring Steel
#365431

Central Drive Shaft 111mm long is manufactured from world-renowned HUDY Spring Steel and features 2.5mm drive pins for maximum drivetrain efficiency.  



Central Drive Shaft 79mm with 2.5mm Pin - HUDY Spring Steel
#365432

Central Drive Shaft 79mm long is manufactured from world-renowned HUDY Spring Steel and features 2.5mm drive pins for maximum drivetrain efficiency 



Central Shaft Universal Joint for HS Bulkhead
#365443

Central shaft universal joint made from world-renowned HUDY Spring Steel.  



Alu Brace Mount - Swiss 7075 T6 (2)
#366011

CNC-machined alu rear brace mount. Set of 2.  



Composite Battery Holder Stand - Short (2)
#366143

Short composite battery holder stand. Set of 2. 



Body for 1/10 4WD Off-Road Buggy - Gamma 4C
#369708

High-performance, low-profile aerodynamic body for XB4C designed by XRAY to perfectly fit the car and work in most track conditions especially for higher grip tracks.  



Body for 1/10 4WD Off-Road Buggy - Gamma 4C - Light
#369709

Ultra-lightweight version of the XB4 Gamma 4C Light body is designed especially for high traction conditions.  



Body for 1/10 4WD Off-Road Buggy - Gamma 4D
#369710

XB4 Gamma 4D body is designed especially for low traction tracks.  



Body for 1/10 4WD Off-Road Buggy - Gamma 4D - Light
#369711

Ultra-lightweight version of the XB4 Gamma 4D body is designed especially for low traction conditions. 



XRAY X12'20 EU
#370011

High-Competition 1/12 Pan Car
• All-new narrower chassis
• All-new side link mounting system
• All-new removable front suspension brace
• All-new shock absorber holders
• All-new servo holders
 



XRAY X12'20 US
#370012

High-Competition 1/12 Pan Car
• All-new narrower chassis
• All-new side link mounting system
• All-new removable front suspension brace
• All-new shock absorber holders
• All-new servo holders
 



XRAY X10 2018 Specs
#370504

High-Competition 1/10 Pan Car
• All-new chassis
• All-new narrower rear pod plate
• All-new redesigned & updated rear suspension
• All-new rear alu bulkheads
• All-new ride height adjustment

 



XRAY X1'20
#370705

??? All-new chassis
??? All-new bulkheads
??? All-new front stand
??? All-new graphite arm mount plates
??? All-new redesigned independent wing mount 



X10'22 Graphite Chassis 2.5mm
#371024

The chassis was redesigned to accommodate the front Tweak-Free Suspension and the rear Tweak-Free POD System 



X1'21 Graphite Chassis 2.5mm
#371026

The X1'21 chassis was redesigned to accommodate the Tweak-Free Pod System and side braces. The chassis continues to offer a wheelbase adjustment using one of three mounting positions for the front suspension.  



X1'21 Graphite Chassis 2.5mm - Hard
#371027

The 2.5mm chassis made from harder graphite material was developed for very-high traction conditions, or when using tires that offer a lot of steering which makes the car more difficult to drive.  



X10'22 Graphite Arm Mount Plate 2.5mm
#371068

CNC-machined arm mounting plate made from 2.5mm high-grade graphite material 



X1'20 Graphite Rear Brace 3.5mm
#371080

CNC-machined rear brace made from 3.5mm premium-grade graphite material redesigned to work with independent wing mounting system. 



X1'21 Graphite Rear Brace 3.5mm
#371081

To integrate with the X1'21 chassis side braces, the rear link brace was redesigned as part of the chassis Multi-Flex system and also functions as the mounting point for the independent wing mount system 



X10'22 Graphite Plate for Mounts 2.5mm
#371098

CNC-machined plate for mounts, made from 2.5mm high-grade graphite material 



X12'21 Alu Solid Chassis 2.0mm - 7075 T6
#371116

CNC-machined X12'21 chassis made from 2.0mm Swiss 7075 T6 aluminum.  



X12'21 Alu Flex Chassis 2.0mm - 7075 T6
#371117

CNC-machined X12'21 chassis made from 2.0mm Swiss 7075 T6 aluminum. Alu flex chassis features more cut-outs better suited for low to medium grip conditions.  



X12'21 Graphite Chassis 2.5mm
#371118

CNC-machined X12’21 chassis made from 2.5mm hard high-grade graphite material with a specially-designed compound which is a good option for low grip carpet racing, as well as asphalt.  



X12'21 Alu Rear Pod Lower Plate 2.0mm - 7075 T6
#371159

CNC-machined rear pod lower plate made from 2.0mm premium-grade aluminum material. 



X12'21 Graphite Rear Pod Lower Plate 2.5mm
#371160

CNC-machined rear pod lower plate made from 2.5mm premium-grade graphite material. 



X10'22 Graphite Rear Pod Lower Plate 2.5mm
#371161

CNC-machined rear lower pod plate made from high-grade graphite material with a specially-designed compound for carpet racing 



X1'21 Graphite Rear Pod Lower Plate 2.5mm
#371163

The rear pod lower plate accommodates aluminum Tweak-Free Pod Mounting System which improves traction and vehicle stability, plus it helps eliminate tweak issues after crashes. The aluminum Tweak-Free Pod Mounting System allows for a significantly lowered roll center, a lowered center of gravity, and updated pivot height adjustment using different shims. 



Alu Pod Link Graphite Plate Holder - Black
#371184-K

Alu pod link graphite plate holder replaces the shims. The holder is made from 1 piece and has centering pins to eliminate the possibility to move graphite plate in crashes.

CNC-machined pod link graphite plate holder is machined from Swiss 7075 T6 aluminum. Black color.
 



X12'21 Graphite Bumper Lower Holder 2.5mm
#371212

Machined from premium 2.5mm graphite, the brace is flexible yet rigid enough to withstand serious crashes.  



X1 Alu Ball-Bearing Anti-Roll Bar Holder Plate - Black
#371291

Alu ball-bearing anti-roll bar holder plate is a part of aluminum anti-roll bar holder system integrated with the front body and wing mount that lowers the overall CG.

 



X12'21 Graphite Front Brace 2.0mm
#372090

The Graphite Front Brace helps to adjust front suspensions flex setting.  



X10'22 Graphite Front Brace 2.0mm
#372091

The Graphite Front Brace helps to adjust front suspensions flex setting 



X10'22 Steel Lower Suspension Arm Brace (2)
#372109

Helps to reinforce the front graphite arm in crashes. Made from 1mm thick black coated steel. 



X12'21 Graphite Lower Suspension Arm Plate 2.5mm
#372118

Unique graphite suspension arm plate 2.5mm for maximum rigidity is part of the front suspension flex adjustment. 



X10'22 Graphite Lower Suspension Arm Plate 2.5mm
#372119

Unique graphite suspension lower arm plate 2.5mm for maximum rigidity is part of the front suspension flex adjustment 



X1'21 Graphite Lower Suspension Arm 2.5mm
#372127

CNC-machined graphite LOWER suspension arm made from 2.5mm premium-grade graphite material is part of the redesigned X1'21 front suspension. Allows quick & easy accessibility to the anti-roll bar. 



X1'21 Graphite Upper Suspension Arm 2.5mm
#372135

CNC-machined graphite UPPER suspension arm made from 2.5mm premium-grade graphite material is part of the redesigned X1'21 front suspension. Allows mounting of the anti-roll bar mounts 



Front Coil Spring for 4mm Pin C=1.5-1.7 - Gold (2)
#372186

Ultimate-match front coil shock springs for pan car front suspension with 4mm king pin axle offer an additional range of choices to fine-tune your car.  



Front Coil Spring for 4mm Pin C=1.8-2.0 - Silver (2)
#372187

Ultimate-match front coil shock springs for pan car front suspension with 4mm king pin axle offer an additional range of choices to fine-tune your car 



Front Coil Spring for 4mm Pin C=2.1-2.3 - Black (2)
#372188

Ultimate-match front coil shock springs for pan car front suspension with 4mm king pin axle offer an additional range of choices to fine-tune your car 



Composite Steering Block for 4mm King Pin - Right - Graphite
#372214

Molded composite RIGHT steering block for 4mm King Pin. Hard material. Marked "R" for easy identification.  



Composite Steering Block for 4mm King Pin - Left - Graphite
#372224

Molded composite LEFT steering block for 4mm King Pin. Hard material. Marked "L" for easy identification.  



X12 Kingpin 4mm - 1º (2)
#372282

Super-smooth, hardened steel 4mm kingpins provide the foundation for the Tweak Free Front Suspension.  



X12 King Pin 4mm - 1.5° (2)
#372283

Super-smooth, hardened steel 4mm kingpins provide the foundation for the Tweak Free Front Suspension.  



X12 Kingpin 4mm - 2º (2)
#372284

Super-smooth, hardened steel 4mm kingpins provide the foundation for the Tweak Free Front Suspension.  



X12 Kingpin 4mm - 0.5º (2)
#372285

Super-smooth, hardened steel 4mm kingpins provide the foundation for the Tweak Free Front Suspension.  



X1'21 King Pin (2)
#372286

The super-smooth, hardened steel kingpins are 3mm longer than previous ones for even greater front droop adjustment range to better set up the car on various traction conditions and track layouts. Set of 2. 



X10 King Pin 4mm - 1 ˚ (2)
#372287

Super-smooth, hardened steel 4mm kingpins provide the foundation for the Tweak Free Front Suspension 



X10 King Pin 4mm - 1.5 ˚ (2)
#372288

Super-smooth, hardened steel 4mm kingpins provide the foundation for the Tweak Free Front Suspension 



X10 King Pin 4mm - 2 ˚ (2)
#372289

Super-smooth, hardened steel 4mm kingpins provide the foundation for the Tweak Free Front Suspension 



Alu Shim 4x6x1.0mm (10)
#372297

Alu shims 4x6mm, 1mm thick can be used for various purposes such as ride height & roll center adjustment.  



Alu Shim 4x6x0.5mm (10)
#372298

Alu shims 4x6mm, 0.5mm thick can be used for various purposes such as ride height & roll center adjustment 



X1 Alu Ball-Bearing Anti-Roll Bar Holder - Black
#372410-K

Alu holder for wobble-free mounting of the fully-adjustable wire anti-roll bar system mounted on the arm mount plate via bearings for extra-smooth movement and quick & easy changes and adjustment. The roll bar turns in ball-bearings for maximum precision and free movement. Black color. 



Alu Anti-Roll Bar Pivot Ball 4.9mm (2)
#372450

CNC-machined 4.9mm diameter pivot ball for anti-roll bar, made from premium lightweight 7075 T6 aluminum. Set of 2 



Front Wing Mounting Anti-Roll Bar Front 1.1mm
#372481

Front Wing Mounting Anti-Roll Bar Front made from special spring steel material, designed to work with the aluminum anti-roll bar holder system integrated with the front body and wing mount that lowers the overall CG. 



Front Wing Mounting Anti-Roll Bar Front 1.2mm
#372482

Front Wing Mounting Anti-Roll Bar Front made from special spring steel material, designed to work with the aluminum anti-roll bar holder system integrated with the front body and wing mount that lowers the overall CG. Wire thickness = 1.2mm. 



X1 Steering Pivot Shaft - Black
#372550-K

CNC-machined steering pivot shaft made from high-grade Swiss 7075 T6 aluminum, for high strength with ultra-low weight. Black color. 



Ball End 4.2mm with 8mm Thread (2)
#372649

Threaded 4.2mm ball end with 4mm thread manufactured from special HUDY Spring Steel?. Set of 2. 



Ball End 4.2mm with 8mm Thread (2)
#372653

Threaded 4.2mm ball end with 8mm thread manufactured from special HUDY Spring Steel. Set of 2. 



X10'22 Alu Rear Motor Bulkhead - Right
#372910

Bulkheads feature a 1-piece tweak-free design which is more rigid and robust.  



X1'21 Alu Rear Motor Bulkhead - Right
#373018

Alu Rear Motor Bulkhead - Right has a 1-piece tweak-free design that is more rigid and robust.  



X12'21 Alu Rear Motor Bulkhead - Right
#373019

CNC-machined right motor-side rear bulkhead made from premium extra-hard Swiss 7075 T6 aluminum, black coated for long life and stylish look.  



X1'21 Alu Rear Bulkhead - Left
#373028

Alu Rear Bulkhead - Left has a 1-piece tweak-free design that is more rigid and robust. 



X12'21 Alu Rear Bulkhead - Left
#373029

CNC-machined left motor-side rear bulkhead made from premium extra-hard Swiss 7075 T6 aluminum,  



Graphite Rear Bulkhead Brace 2.0mm
#373039

CNC-machined rear bulkhead brace made from 2.0mm premium-grade graphite material. 



Alu Brace Mount 13mm - Black (2)
#373073-K

CNC-machined alu rear brace mount 13mm. Set of 2. Black color.  



Alu Brace Mount 10.5mm - Black (2)
#373075

CNC-machined alu rear brace mount 10.5mm. Set of 2. Black color.  



X12'21 Graphite Rear Brace 2.5mm
#373089

CNC-machined rear brace made from 2.5mm premium-grade graphite material.  



Alu Chassis Pivot Holder - Swiss 7075 T6
#373095

Alu Chassis Pivot Holder is part of the aluminum Tweak-Free Pod Mounting System which improves traction and stability of the car and eliminates tweak issues after crashes.  



Alu Pod Plate Pivot Holder - Swiss 7075 T6
#373096

Alu Pod Plate Pivot Holder is part of the aluminum Tweak-Free Pod Mounting System which improves traction and stability of the car and eliminates tweak issues after crashes.  



Composite Pivot Brace Bushing
#373097

Composite Pivot Brace Bushing is part of the aluminum Tweak-Free Pod Mounting System which improves traction and stability of the car and eliminates tweak issues after crashes.  



Ball End 6.0mm with Hex - HUDY Spring Steel (2)
#373244

Ball end 6.0mm with hex cavity, for connection to molded composite ball joints. Set of 2. 



X12'21 Graphite Rear Pod Upper Plate 2.5mm
#373552

CNC-machined rear pod upper plate made from 2.5mm premium-grade graphite material 



X1'21 Graphite Rear Pod Upper Plate 2.5mm
#373554

CNC-machined graphite rear pod upper plate made from 2.5mm premium-grade graphite material. 



XRAY Solid Axle 1/12 Pan Car - Set
#375000

Rear solid axle set includes graphite solid axle shaft, alu rear wheel hub and hardware. 



XRAY Solid Axle 1/10 Pan Car - Set
#375002

Rear solid axle set for X10 includes graphite solid axle shaft, alu rear wheel hub and hardware 



X12 Alu Differential Hub
#375051

CNC-machined alu diff collar. 



Set Of Alu Shims (0.5mm, 1.0mm, 2.0mm)
#375090

CNC-machined alu shim set for rear track-width adjustment on XRAY XII. Different thicknesses include 0.5, 1.0, and 2.0mm. 

Replaced by Set of Alu Shims (0.5mm, 1.0mm, 2.0mm) - Orange 



Alu Shim 6.37x8.4x6.0mm (2)
#375093

CNC-machined alu shim. ID x OD x thickness = 6.37 x 8.4 x 6.0mm. Set of 2.  



X1 Alu Servo Mount - Black
#376260-K

Redesigned servo mount works with lower adjustable graphite arms. The servo mount is CNC-machined from premium extra-hard Swiss 7075 T6 aluminum and additionally black coated for stealth look. Black color. 



X1'21 Alu Front Stand - Black
#376262-K

The front alu stand allows to connect graphite arm mount plate with lower suspension arms to increase steering response. 



X12'21 Alu Servo Mount - Black (2)
#376263

CNC-machined alu posts for steering servo mount. Set of 2. Black color. 



X12'21 Graphite Side Brace 2.5mm - Right & Left
#376320

Graphite front chassis side brace 2.5mm made from graphite material. 



X1'21 Graphite Side Brace 2.5mm - Right & Left
#376324

Graphite side braces made from 2.5mm premium-grade graphite material, are mounted to the rear brace, extending forward along the edge of the chassis. 



Alu Mount 26.5mm - Black (2)
#376361-K

CNC-machined 26.5mm alu mount. Black color. Set of 2. 



X1 Alu Mount 10.8mm - Black (2)
#376364-K

CNC-machined 10.8mm alu mount. Black color. Set of 2. 



Alu Mount 6.0mm - Black (2)
#376366-K

CNC-machined 6.0mm alu mount. Black color. Set of 2. 



Alu Mount 22.5mm - Black
#376367

CNC-machined 22.5mm alu mount. Black color. Set of 2. 



Shock Absorber Set - Black
#378002

The center shock has redesigned geometry with the mounting point moved further back for quicker direction change, as well as improved on-power steering. 



Alu Shock Body Cap - Lower - Black
#378030-K

CNC-machined alu lower cap for XRAY X12, X1 and X10 micro shock absorber. Black color. 



Alu Shock Adjustable Nut - Black
#378040-K

CNC-machined alu threaded shock spring preload collar for XRAY X12 and X10 micro shock absorber. Black color. 



Alu Shock Body Cap - Upper - Black
#378050-K

CNC-machined alu upper cap for XRAY X12 and X10 micro shock absorber. Black color. 



X12 Shock Shaft 24mm
#378063

Hardened, high-strength shock shaft 24mm for XRAY X12 shock absorber. Polished for super-smooth operation. 



Alu Shock Spring Collar - Black
#378070-K

CNC-machined alu lower spring collar for XRAY X12 and X10 micro shock absorber. 



X1 Alu Shock Spring Collar - Black
#378072-K

CNC-machined alu lower spring collar for shock absorber. Ultra-fine threaded post for precise shock length adjustment. Allows quick & easy spring preload adjustment. Downstop can be adjusted by tightening-loosening the shock spring collar directly on the mounted shock. Black color. 



X1 Alu Shock Adapter - Black
#378073-K

CNC-machined alu shock adaptor allows for quick & easy changes to the shock position. 



Shock Spring C=2.8 - Black - 3 Dots
#378097

 



Shock Spring C=3.1 - Black - 4 Dots
#378098

hock spring for central shock absorber with progressive C=3.1 spring rate.  



XRAY M18
#380000

Professional 1/18 4WD shaft-drive micro car
• high competition micro car with highest performance
• racing characteristics of 1/10 touring cars
• ultra low center-of-gravity (CG)
• maximum drivetrain efficiency
• drivetrain includes 16 high-speed ball-bearings for maximum efficiency and speed 



XRAY M18 PRO LiPo
#380003

Professional 1/18 4WD shaft-drive micro car
• new high-competition LiPo micro racing platform
• designed by legendary RC designer and XRAY’s award-winning Chief Designer - Ing. Hudy Juraj
• revolutionary XRAY Multi-Flex Technology™ top deck allows independent front/rear flex adjustment
• new adjustable battery holder system
 



XRAY M18 RTR
#380040

Professional 1/18 4WD shaft-drive micro car RTR
XRAY quality ready to run... for you

Introducing XRAY's first RTR kit.... XRAY quality, now comes built in the box! 



XRAY NT18
#380200

Professional 1/18 4WD shaft-driven micro nitro touring car
• the world's first 1/18 nitro touring car
• 4WD shaft-drive micro nitro car
• powerful 0.8cc nitro engine
• super fast - speed more than 50km/hour (30mph) 



XRAY NT18 + Electronic Pack
#380291

Standard XRAY NT18 kit with XRAY Micro Nitro Electronic Pack (Includes one 4-cell Receiver Battery Pack, two XMS01-MG high-quality micro servo with metal gears, and a pre-wired on/off switch with cables). 



XRAY M18T
#380500

Professional 1/18 4WD shaft-driven micro truck
• optional conversion set transforms the truck into a monster truck
• maximum efficiency drivetrain includes 22 high-speed ball-bearings
• fully independent front and rear suspension
• oil-filled coil-over shocks
• servo saver included 



XRAY M18T PRO
#380501

• re-designed version of the ultra-popular M18T
• high-performance graphite chassis and top deck
• lengthened wheelbase
• world-renowned top-secret HUDY Spring Steel™ driveshafts 



XRAY M18T RTR
#380540

Professional 1/18 4WD shaft-driven micro truck RTR
• manufactured and assembled in Europe by XRAY
• the world’s most premium quality micro truck RTR
• premium electronics and radio equipment included 



XRAY M18T + Power Pack
#380591

Standard XRAY M18T kit with Power Pack (Includes XRAY XMC300R ESC with forward/brake/reverse, XRAY XMS01MG high-quality micro servo with metal gears and XRAY 300 Super Size motor with integrated capacitor board). 



XRAY M18MT
#380600

Professional 1/18 4WD high load shaft driven micro monster truck
• Maximum efficiency drive train includes 22 high-speed ball bearings
• Fully independent front and rear suspension
• Maximum suspension up travel
• 8x oil-filled coil-over shocks 



XRAY M18MT RTR
#380640

Professional 1/18 4WD shaft-driven micro monster truck RTR
• manufactured and assembled in Europe by XRAY
• the world’s most premium quality micro monster truck RTR
• premium electronics and radio equipment included 



XRAY NT18T
#380700

Professional 1/18 4WD shaft-driven micro nitro truck
• the world's first 1/18 nitro off-road truck
• 4WD shaft-drive micro nitro car
• powerful 0.8cc nitro engine
• super fast - speed more than 50km/hour (30mph) 



XRAY NT18T RTR
#380740

Professional 1/18 4WD shaft-driven micro nitro truck RTR
• manufactured and assembled in Europe by XRAY
• the world’s most premium quality micro nitro truck RTR
• premium electronics and radio equipment included
• HUDY Start-Box for easy starting included for FREE 



XRAY NT18T + Electronic Pack
#380791

Standard XRAY NT18T kit with XRAY Micro Nitro Electronic Pack (Includes two XMS01-MG high-quality micro servo with metal gears, and a pre-wired on/off switch with cables). 



XRAY NT18MT RTR
#380840

Professional 1/18 4WD shaft-driven micro nitro monster truck RTR
• manufactured and assembled in Europe by XRAY
• the world’s most premium quality micro nitro monster truck RTR
• premium electronics and radio equipment included
• HUDY Start-Box for easy starting included for FREE 



XRAY High-Performance Windbreaker (L)
#396000L

New authentic XRAY High-Performance Windbreaker is made from next-generation, ... 



XRAY High-Performance Windbreaker (M)
#396000M

New authentic XRAY High-Performance Windbreaker is made from next-generation, high-tech material that offers super-lightweight construction combined with durable water repellant finish and unsurpassed strength performance. Available in sized from 2XS to 3XL. 



XRAY High-Performance Windbreaker (S)
#396000S

New authentic XRAY High-Performance Windbreaker is made from next-generation, high-tech material that offers super-lightweight construction combined with durable water repellant finish and unsurpassed strength performance. Available in sized from 2XS to 3XL. 



XRAY High-Performance Windbreaker (XL)
#396000XL

New authentic XRAY High-Performance Windbreaker is made from next-generation, high-tech material that offers super-lightweight construction combined with durable water repellant finish and unsurpassed strength performance. Available in sized from 2XS to 3XL. 



XRAY High-Performance Windbreaker (XS)
#396000XS

New authentic XRAY High-Performance Windbreaker is made from next-generation 



XRAY High-Performance Windbreaker (XXL)
#396000XXL

New authentic XRAY High-Performance Windbreaker is made from next-generation, high-tech material that offers super-lightweight construction combined with durable water repellant finish and unsurpassed strength performance. Available in sized from 2XS to 3XL. 



XRAY High-Performance Windbreaker (XXS)
#396000XXS

New authentic XRAY High-Performance Windbreaker is made from next-generation, high-tech material that offers super-lightweight construction combined with durable water repellant finish and unsurpassed strength performance. Available in sized from 2XS to 3XL. 



XRAY High-Performance Windbreaker (XXXL)
#396000XXXL

New authentic XRAY High-Performance Windbreaker is made from next-generation, high-tech material that offers super-lightweight construction combined with durable water repellant finish and unsurpassed strength performance. Available in sized from 2XS to 3XL. 



GTX8 2020 Manual - supplementary sheet
#600000

See the GTX8 2020 Manual - supplementary sheet 



Ball-Bearing 6x13x5 Steel Sealed - Oil (2)
#930613

High-quality ball-bearings ID x OD x thickness (mm) = 6x13x5mm. Set of 2 pieces. 



Ball-Bearing 10x16x4 Steel Sealed - Oil (2)
#931016

High-quality ball-bearings ID x OD x thickness (mm) = 10x16x4mm. Set of 2 pieces. 



Ball-Bearing 12x18x4 Steel Sealed - Oil (2)
#931218

High-quality ball-bearings ID x OD x thickness (mm) = 12x18x4mm. Set of 2 pieces. 



Washer S 4x6x0.2 (10)
#962043

Flat washer. ID x OD x thickness = 4mm x 6mm x 0.2mm. Set of 10 pieces. 



Pin 2x8.8 (10)
#980209

 



ID Product Name Released
352273 Alu Caster Block 18° Right - Swiss 7075 T6 Apr. 13, 2021
350503 XRAY GTX8'21 Mar. 27, 2021
350603 XRAY GTXE’21 Mar. 27, 2021
352278 Alu Caster Block 6° Right - Swiss 7075 T6 Mar. 23, 2021
352283 Alu Caster Block 18° Left - Swiss 7075 T6 Mar. 23, 2021
352288 Alu Caster Block 6° Left - Swiss 7075 T6 Mar. 23, 2021
357257 Pivot Ball Camber Alu Shim 6x13x1.5mm (2) Mar. 23, 2021
371027 X1'21 Graphite Chassis 2.5mm - Hard Mar. 23, 2021
361270 XB4 Carbon Fiber Chassis Side Guard L+R Mar. 19, 2021
301063 T4'21 Graphite Upper Deck 1.6mm Mar. 17, 2021
372450 Alu Anti-Roll Bar Pivot Ball 4.9mm (2) Mar. 12, 2021
359714 XB8 / XB8E "Eazy" Body - Lightweight Mar. 11, 2021
371024 X10'22 Graphite Chassis 2.5mm Mar. 11, 2021
371068 X10'22 Graphite Arm Mount Plate 2.5mm Mar. 11, 2021
371098 X10'22 Graphite Plate for Mounts 2.5mm Mar. 11, 2021
371161 X10'22 Graphite Rear Pod Lower Plate 2.5mm Mar. 11, 2021
372091 X10'22 Graphite Front Brace 2.0mm Mar. 11, 2021
372109 X10'22 Steel Lower Suspension Arm Brace (2) Mar. 11, 2021
372119 X10'22 Graphite Lower Suspension Arm Plate 2.5mm Mar. 11, 2021
372287 X10 King Pin 4mm - 1 ˚ (2) Mar. 11, 2021