|
XRAY T1
#300000
High-tech Luxury 1/10 Electric Touring Car
· most advanced touring car with fully independent and fully adjustable suspension
· fully adjustable wheelbase (9 mm range)
|
 |
|
XRAY T1 EVO2
#300002
High-tech Luxury 1/10 Electric Touring Car
• most advanced touring car
• fully independent and fully adjustable suspension
• high-tensile transmission parts from special spring steel made by HUDY
|
 |
|
XRAY T1 FACTORY KIT
#300004
High-tech Luxury 1/10 Electric Touring Car
• new lightweight rear ball differential with Labyrinth Dust Covers™, carbide diff balls, and carbide axial thrustbearing
• new CNC-machined T6 duraluminum lightweight "Euro style" bulkheads
|
 |
|
XRAY T1FK 05
#300005
High-tech Luxury 1/10 Electric Touring Car
• 5th generation of the award winning T1 platform
• highest performance in any racing conditions
• XRAY’S luxury concept, stylish design and attention to detail
• new internal ratio with large middle pulley
|
 |
|
XRAY T2
#300006
High-tech Luxury 1/10 Electric Touring Car
• brand new T2 platform, completely redesigned, engineered, and built from the ground up
• lowest CG ever!
• XRAY Multi-Flex Technology™ (XRAY patent): fully adjustable chassis and top deck torsion and flex
|
 |
|
XRAY T2 007 US Foam-Spec Edition
#300007
High-tech Luxury 1/10 Electric Touring Car
• Build on the highly-successful T2 platform
• US foam-spec edition specially designed for foam tire racing conditions
• 3.5mm ultra thick solid chassis with milled area’s allow all parts to be mounted ultra-low
|
 |
|
XRAY T2 007 EU Rubber-Spec Edition
#300008
High-tech Luxury 1/10 Electric Touring Car
• Build on the highly-successful T2 platform
• EU rubber-spec edition specially designed for rubber tire racing conditions
• 2.5mm chassis with re-designed XRAY Multi-Flex Technology™ flex points
|
 |
|
XRAY T1 MINI
#300009
High-tech Luxury 1/12 Electric Touring Car
• based on the extremely successful T1 concept
• extremely easy to build and fun to race
• pure design, long life, ultra-stiff chassis
• very easy assembly/disassembly and maintenance
• fully independent, fully adjustable suspension
|
 |
|
XRAY T2 008 EU Rubber-Spec 5-Cell Edition
#300010
High-tech Luxury 1/10 Electric Touring Car
• EU Rubber-Spec Editions are specially designed for rubber tire racing conditions
• 5-cell, 2.5mm chassis
• Narrow top deck
|
 |
|
XRAY T2 008 EU Rubber-Spec 6-Cell Edition
#300011
High-tech Luxury 1/10 Electric Touring Car
• EU Rubber-Spec Editions are specially designed for rubber tire racing conditions
• 6-cell, 2.5mm chassis
• Narrow top deck
|
 |
|
XRAY T2 008 US Foam-Spec 6-Cell Edition
#300012
High-tech Luxury 1/10 Electric Touring Car
• US Foam-Spec Edition specially designed for foam tire racing conditions
• 3.5mm ultra-thick solid 6-cell chassis with milled area allow all parts to be mounted ultra-low
• Wide top deck mounted to chassis via aluminum standoffs provides wide, ultra-stable, solid platform
|
 |
|
XRAY T2 009 EU Rubber-Spec 6-Cell Edition
#300013
High-tech Luxury 1/10 Electric Touring Car
• EU Rubber-Spec Editions are specially designed for rubber tire racing conditions
• 6-cell, 2.5mm chassis
• Narrow top deck
• Limited edition orange coloring on aluminum parts for stylish and distinctive look
|
 |
|
XRAY T2 009 US Foam-Spec 6-Cell Edition
#300014
High-tech Luxury 1/10 Electric Touring Car
• US Foam-Spec Edition specially designed for foam tire racing conditions
• 3.5mm ultra-thick solid 6-cell chassis with milled area allow all parts to be mounted ultra-low
• Wide top deck mounted to chassis via aluminum standoffs provides wide, ultra-stable, solid platform
• Limited edition orange coloring on aluminum parts for stylish and distinctive look
|
 |
|
XRAY T3 EU Rubber-Spec Edition
#300015
High-tech Luxury 1/10 Electric Touring Car
• EU Rubber-Spec Editions are specially designed for rubber tire racing conditions
• LiPo & NiMh multi purpose-designed platform
• Unique XRAY Alternative Driveline Configuration™ for perfect weight balance with either LiPo or NiMH batteries and electronics layout
• Front & rear diffs and transmission belts can be quickly & easily oriented to either the left or right side to balance the car for either LiPo or NiMH use.
|
 |
|
XRAY T3 US Foam-Spec Edition
#300016
High-tech Luxury 1/10 Electric Touring Car
• US Foam-Spec Edition specially designed for foam tire racing conditions
• LiPo & NiMh multi purpose-designed platform
• Unique XRAY Alternative Driveline Configuration™ for perfect weight balance with either LiPo or NiMH batteries and electronics layout
• Front & rear diffs and transmission belts can be quickly & easily oriented to either the left or right side to balance the car for either LiPo or NiMH use.
|
 |
|
XRAY T3 2011 Specs
#300017
High-tech Luxury 1/10 Electric Touring Car
• All new ultra-narrow chassis specifically designed for LiPo batteries
• New centrally-positioned dual steering system
• Improved cornering speed and increased out-of-corner steering
• Easier to drive, especially in high-traction conditions
• XRAY Multi-Flex Technology™ adapted to the T3’11 top deck design allows flex adjustment to adjust car stiffness for particular track conditions
|
 |
|
XRAY T3 2012 Specs
#300018
High-tech Luxury 1/10 Electric Touring Car
• New graphite chassis designed for increased overall traction and improved on-power steering
• New re-designed graphite top deck for increased in/out of the corner steering
• New front & rear graphite shock towers designed for new upper bulkheads
• New XRAY leak-free gear differential is lighter and smoother than all other differentials; no maintenance required
• New 4-spring servo-saver for smoother handling and increased steering accuracy
|
 |
|
XRAY T4
#300019
High-tech Luxury 1/10 Electric Touring Car
• All-new T4 platform
• All-new chassis design and top deck
• All-new Super Low Profile (SLP) aluminum shocks
• All-new redesigned and reengineered bulkheads
• All-new unique super low profile tweak-free motor mount
|
 |
|
XRAY T4 2014 Specs
#300020
High-tech Luxury 1/10 Electric Touring Car
• All-new chassis design
• All-new suspension holders
• All-new arm design
• All-new smart SFA™ (Suspension Flex Adjustment™)
• All-new motor mount
|
 |
|
XRAY T4 2015 Specs
#300021
High-tech Luxury 1/10 Electric Touring Car
• All-new chassis design
• All-new motor mount
• All-new ARS™ system
• All-new anti-roll bar mounting system
• All-new upper clamps
|
 |
|
XRAY T4 2016 Specs
#300022
High-tech Luxury 1/10 Electric Touring Car
• All-new chassis design
• All-new motor mount flex system
• All-new top deck
• All-new rear suspension holder for ARS
• All-new front ECS drive shafts
• Improved traction
• Improved steering characteristics
|
 |
|
XRAY T4 2017 Specs
#300023
High-tech Luxury 1/10 Electric Touring Car
• All-new chassis design
• All-new inline flex adjustment
• All-new servo mount system
• All-new floating steering system
• All-new Ackermann position
|
 |
|
XRAY T4 2018 Specs
#300024
High-tech Luxury 1/10 Electric Touring Car
• All-new ULP shocks
• All-new chassis design
• All-new redesigned top deck
• All-new in-line chassis flex set-up options
• All-new ECS drive shafts
|
 |
|
XRAY T4'19
#300025
High-tech Luxury 1/10 Electric Touring Car
• All-new chassis
• All-new XRAY’s unique BPA system
• All-new front & rear shock towers
• All-new removable front chassis brace
• All-new alu steering plate
|
 |
|
XRAY T4'20 - Graphite Edition
#300026
High-tech Luxury 1/10 Electric Touring Car
- New centralized drivetrain
- New motor/layshaft position
- New 7mm longer front and rear suspension arms
- Super low anti-roll bar mounts to lower the vehicle CG
|
 |
|
XRAY T4'20 - Alu Edition
#300027
High-tech Luxury 1/10 Electric Touring Car
- New centralized drivetrain
- New motor/layshaft position
- New 7mm longer front and rear suspension arms
- Super low anti-roll bar mounts to lower the vehicle CG
|
 |
|
XRAY T1R
#300100
High-Competition 1/10 Electric Touring Car
• most affordable competition touring car
• fully independent, fully adjustable C-hub suspension
• high-tensile transmission parts from special HUDY Spring Steel
• modern CAD-designed ultra stiff chassis with Inline-Flow Cooling System™
|
 |
|
XRAY T2R
#300101
High-Competition 1/10 Electric Touring Car
• Built on the successful, award-winning, and racing-dominating T2 platform
• XRAY Multi-Flex Technology™ (XRAY patent): fully adjustable chassis and top deck torsion and flex (alu stands available optionally)
|
 |
|
XRAY T2R PRO
#300102
High-Competition 1/10 Electric Touring Car
• Based on the ultra-successful, award-winning, and racing-dominating XRAY T2’008 & T2’009 platforms
• Competition racing design featuring well-proven suspension geometry, drivetrain, and parts ’” the whole racing platform of T2 cars!
|
 |
|
XRAY T3R
#300103
High-Competition 1/10 Electric Touring Car
• Based on the ultra-successful T3 platform
• LiPo & NiMh multi purpose-designed platform
• Unique XRAY Alternative Driveline Configuration™ for perfect weight balance with either LiPo or NiMH batteries and electronics layout
• Front & rear diffs and transmission belts can be quickly & easily oriented to either the left or right side to balance the car for either LiPo or NiMH use.
|
 |
|
XRAY T4F
#300200
High-tech Luxury 1/10 FWD Electric Touring Car
- Pure racing design, premium luxury quality, highest performance
- Premium, exclusive, and high-tech materials used throughout
- Based on T4 platform
|
 |
|
Composite C-Hub Suspension Option Set, Complete F+R
#300900
Composite C-hub suspension set, complete for front and rear. Modeled after the XRAY's superb aluminum C-hub suspension (#300901), the components of this set are molded from a tough composite material for lighter weight, without sacrificing quality or rigidity.
|
 |
|
T4'20/T4'21 ARS - Active Rear Suspension Set
#300902
ARS??? suspension set consists of: suspension arms, alu 0??? C-hubs, hard steering blocks, and ARS??? linkages which connect suspension holders with the suspension block.
|
 |
|
Alu C-Hub Suspension Option Set, Rear
#300931
This superb new optional C-hub suspension gives a slightly softer ride, and is a great way to set up your T1 for different racing conditions.
|
 |
|
T2'009 - Rubber-Spec Conversion Set - 38T Pulley
#300944
38T conversion set for the T2'009EU and T2R Pro changes the internal transmission ratio from 1.7 to 1.9. Set includes top-quality 38T composite solid axle and 38T diff pulley, plus new front & rear belts to fit the new pulleys.
|
 |
|
T3 2011 - Conversion Set
#300945
Conversion set for T3 to convert it to the T3’2011 spec. Includes all necessary parts such as chassis, top deck, dual steering system, lower shock membranes and shock foams, and long LiPo composite battery backstops.
|
 |
|
T4'20 Graphite Chassis 2.2mm
#301000
T4’20 chassis is designed and developed for the centrally positioned layshaft. The chassis is completely redesigned to accommodate the center drivetrain system and the narrow mounts for the long arm suspension.
|
 |
|
T4'20 Alu Flex Chassis 2.0mm - Swiss 7075 T6
#301002
T4’20 chassis is designed and developed for the centrally positioned layshaft. The chassis is completely redesigned to accommodate the center drivetrain system and the narrow mounts for the long arm suspension.
|
 |
|
T4'20 Graphite Upper Deck 2.0mm
#301060
The redesigned top deck works with the center layshaft location in the middle of the chassis. Made from 2.0mm graphite material, the shape of the top deck has been specifically designed to achieve maximum traction and great steering characteristics at the same time.
|
 |
|
T4'20 Graphite Upper Deck 1.6mm
#301061
Top deck was designed to work with the center layshaft location in the middle of the chassis. The top deck is perfectly symmetrical to achieve the ideal, consistent flex behavior.
|
 |
|
Chassis 2.5mm Graphite
#301100
High-quality CNC-machined chassis made from 2.5mm, highest-quality woven graphite.
|
 |
|
6-Cell Chassis - Graphite
#301110
New CNC-machined graphite 6-cell chassis with the batteries either on the left side or right side. This chassis layout enables you to either use the various placements almost as on the standard chassis, but also to place all 6 cells along the left or right side.
|
 |
|
eXtra Rigid Chassis (XRC) - Graphite 3.5mm
#301111
Use the ultimate chassis that top Team XRAY drivers Josh Cyrul, Ralph Burch, Jr. and Alex Lopez used to win their US National titles. Turn your T1 into the most ultimate racing machine.
|
 |
|
Chassis T1FK 05 - 3.0mm Graphite - CNC Machined
#301113
Optional 3.0mm thick high-quality CNC-machined graphite chassis for XRAY T1FK’05. This chassis is 0.5mm thicker than the standard #301112 T1FK’05 chassis, allowing for an overall stiffer chassis; recommended for a high grip conditions such as foam carpet racing.
|
 |
|
Composite Chassis
#301117
CAD-designed ultra-rigid composite chassis is standard chassis for T1R Raycer, but may be used on T1 or T1 EVO2. Molded from tough specially-formulated composite, designed to handle the most extreme conditions and serious impacts. Innovative Inline-flow Cooling System™ cools batteries and motor, and allows for bottom mounting of chassis weights for ultra-low CG.
|
 |
|
T2R FRP Chassis - CNC Machined
#301118
CNC-machined FRP chassis for XRAY T2R with MFT™ channels and attachment points. Can be upgraded with a T2 graphite chassis.
|
 |
|
T2 Chassis 2.5mm Graphite - Rubber-Spec - Multi-Flex™
#301122
CNC-machined T2 chassis from premium grade 2.5mm graphite material. This chassis has been slightly updated and optimized for rubber-tire racing conditions. Multi-Flex™ slots have been slightly redesigned to provide improved flex characteristics.
|
 |
|
T2 Chassis 3.5mm Graphite - Extra-Thick - Foam-Spec
#301123
Ultra-rigid and stiff CNC-machined T2 chassis from premium grade, extra-thick and rigid 3.5mm graphite material. This chassis enables the car to achieve an ultra-stiff torsion and flex setting required for high-competition foam racing.
|
 |
|
T3 FRP Chassis 2.5mm - Rubber-Spec
#301129
CNC-machined 6-cell chassis of 2.5mm premium-grade graphite material, specially designed and optimized for rubber-tire racing. Features slots for 6-cell batteries. Accommodates 5- or 6-cell NiMH battery packs or a single LiPo battery. Fits XRAY T3.
|
 |
|
T3 Graphite Chassis 3.0mm - Foam-Spec
#301130
CNC-machined 6-cell chassis of 3.0mm thick, premium-grade graphite material, specially designed and optimized for foam-tire racing. Features slots for 6-cell batteries. Accommodates 5- or 6-cell NiMH battery packs or a single LiPo battery. Fits XRAY T3.
|
 |
|
T3'11 Graphite Chassis 2.5mm
#301131
CNC-machined chassis of premium-grade 2.5mm thick graphite material. Specifically designed for LiPo batteries, all electronics are located along the centerline to make this the best-balanced electric touring car. The 94mm wide chassis features pre-drilled holes for optional central chassis weights.
|
 |
|
T3'12 Graphite Chassis 2.0mm
#301133
The new 2mm chassis was developed to provide the best possible traction for low-traction conditions. The thinner chassis allows the car to flex more which generates more overall traction.
|
 |
|
T4 Graphite Chassis 2.2mm
#301134
The new 2.2mm thick chassis is CNC-machined from premium-grade graphite material and provides maximum traction under low traction conditions while maintaining stability and forgiveness under high traction conditions.
|
 |
|
T4'17 Graphite Chassis 2.2mm
#301142
All-new T4’17 chassis made from 2.2mm premium-grade graphite material was redesigned to fit the new all-new inline chassis flex system adjustment.
|
 |
|
T4'18 Graphite Chassis 2.2mm
#301145
The 2.2mm thick chassis is CNC-machined from premium-grade graphite material. The chassis features pre-drilled holes for optional parts such as chassis weights, graphite motor guard, graphite adjustable battery holder, and battery strap.
|
 |
|
T4F Graphite Chassis 2.2mm
#301152
The 2.2mm thick chassis is CNC-machined from premium-grade graphite material and features pre-drilled holes for optional parts such as chassis weights and adjustable battery holder.
|
 |
|
T4F'20 Graphite Chassis 2.2mm
#301154
The 2.2mm thick chassis is CNC-machined from premium-grade graphite material and features pre-drilled holes for optional parts such as chassis weights and adjustable battery holder.
|
 |
|
T4F Graphite Upper Deck 2.0mm
#301162
High-quality CNC-machined top deck made from 2.0mm premium graphite material works great in most conditions with the standard graphite chassis.
|
 |
|
Upper Deck - Wide
#301163
Wide upper deck is made of high-quality CNC-machined graphite. Wider and stiffer than stock upper decks on T1 Evo2 and T1 Factory Kit.
|
 |
|
Upper Deck T1FK 05 - CNC Machined
#301164
High-quality CNC-machined graphite upper deck for XRAY T1FK’05 has been optimized to provide sufficient flex while being stiff enough to provide rigidity. Includes composite bearing holder.
|
 |
|
Upper Deck T1FK 05 - CNC Machined - Wide
#301165
High-quality CNC-machined graphite upper deck for XRAY T1FK’05 is wider than standard #301164 upper deck for increased chassis stiffness; recommended for high-grip conditions especially foam/carpet racing.
|
 |
|
T2R FRP Upper Deck
#301168
CNC-machined FRP upper deck for XRAY T2R with MFT™ channels and attachment points. Can be upgraded with a T2 graphite upper deck.
|
 |
|
Ultra Flexible Top Deck
#301170
This option part makes the top deck and whole car very stiff in the axis direction of transmission and stiff at any serious crash, but makes the chassis with suspension flex when needed. By letting the chassis twist, the car can get more grip without making the suspension any softer (and increasing body roll). The car is more calm and is not so aggressive therefore it has feeling it is more easy to drive.
|
 |
|
Adjustable Upper Deck T1FK 05 - 2.5mm Graphite
#301175
XRAY introduces another late-breaking innovation for the new T1FK'05, confirming once again that XRAY is the leader in innovative development and leading-edge engineering.
After long term tests by factory team drivers, XRAY presents the world's first adjustable upper deck, CNC-machined from premium 2.5mm graphite.
|
 |
|
Alu Upper Deck Brace (2)
#301176
CNC-machined lightweight alu braces for altering the stiffness of the upper decks of both the XRAY T2 (uses 2 braces) and T1FK'05 (uses 3 braces). Placed in strategic positions on the top decks, these braces alter upper deck stiffness to fine-tune the car to the track. Set of 2.
|
 |
|
T2 007 Upper Deck - Narrow - Rubber-Spec - Multi-Flex™
#301178
CNC-machined graphite top deck is specially redesigned and optimized for rubber-tire racing conditions. Retaining the well-proven Multi-Flex Technology™ positions, the shape of the top deck has been redesigned and tapered to provide a bit more flex to the front suspension, while the rear is firmly attached to the bulkheads.
|
 |
|
T2 007 Upper Deck - Wide - Foam-Spec - Multi-Flex™
#301179
CNC-machined graphite top deck is specially designed for high-grip foam-tire racing conditions. The US edition top deck has been purposefully widened in the front, allowing two different alu stands mounting positions to allow the creation of a super-solid platform thanks to the stand outer mounting positions.
|
 |
|
Flexible Top Deck - Graphite
#301180
The new 301180 Flexible Top Deck provides another tuning option to adjust the chassis stiffness of your XRAY T1. Made of CNC-machined top quality graphite, this flexible top deck provides medium stiffness, stiffer than the 301170 Ultra Flexible Top Deck, but softer than the standard stock top deck.
|
 |
|
T2 008 Rubber-Spec Upper Deck Graphite
#301183
CNC-machined upper deck of premium-grade graphite material, specially designed and optimized for rubber-tire racing conditions. The narrow design provides appropriate torsion and flex, and the elongated profile reduces unwanted tweak in crashes. Fits XRAY T2’008.
|
 |
|
T2 008 Foam-Spec Upper Deck Graphite
#301184
CNC-machined upper deck of premium-grade graphite material, specially designed and optimized for foam-tire racing conditions. Fits XRAY T2’008. This deck is purposefully wider in the front, allowing the top deck to be connected to the chassis with aluminum stands, creating a solid platform for high-traction foam tire racing. The rear separate top deck mount features the same extra-wide design allowing the rear top deck mount to be connected to the chassis via aluminum stands.
|
 |
|
T2 008 Asphalt-Spec Upper Deck Graphite + Rear Upper Deck - Set
#301185
CNC-machined front and rear upper deck of premium-grade graphite material, specially designed and optimized for rubber-tire racing conditions. The narrow design provides appropriate torsion and flex, and the elongated profile reduces unwanted tweak in crashes.
|
 |
|
T3 Graphite Upper Deck 2.0mm - Foam-Spec
#301191
CNC-machined upper deck of premium-grade 2.0mm thick graphite material, specially designed and optimized for foam-tire racing conditions. Fits XRAY T3.
|
 |
|
T3'11 Graphite Upper Deck 2.0mm
#301192
CNC-machined upper deck of premium-grade 2.0mm thick graphite material, specially designed to fit the new LiPo chassis design and the new dual steering system.
|
 |
|
T3'12 Graphite Upper Deck 2.0mm
#301193
CNC-machined upper deck of premium-grade 2.0mm thick graphite material, specially designed to fit the new LiPo chassis design with new dual steering system.
|
 |
|
T3'12 Graphite Upper Deck 1.6mm
#301194
To generate even more traction, the new 2mm chassis can be combined with the new 1.6mm top deck which was developed to increase traction and in-corner steering.
|
 |
|
T4 Graphite Upper Deck 2.0mm
#301195
CNC-machined upper deck of premium-grade 2.0mm thick graphite material, specially designed to fit the new narrow bulkheads.
|
 |
|
T4 Graphite Upper Deck 2.0mm
#301197
CNC-machined upper deck of premium-grade 2.0mm thick graphite material, specially designed to fit the new narrow bulkheads and new aluminum top deck mount #306516.
|
 |
|
T4'18 Graphite Upper Deck 2.0mm
#301199
Redesigned top deck to work with the redesigned layshaft bulkheads and motor mount which moves the motor 1mm closer to the center of the car.
|
 |
|
Impact Absorbing Front Bumper
#301201
Impact Absorbing Front Bumper for T1. The bumper is made from high quality nylon that absorbs the energy from crashes.
|
 |
|
Composite Bumper
#301202
Lower bumper holder made from tough composite material. Fits XRAY T2, T3 cars.
|
 |
|
T4F Graphite Bumper Upper Holder 2.0mm
#301209
CNC-machined front upper bumper holder made from premium-grade graphite material. The upper graphite bumper holds the entire bumper assembly together.
|
 |
|
Graphite Upper Holder For Precut Bumper
#301214
Graphite upper holder for precut bumper is great option if you race at races requiring transponder. The holder is manufactured from high quality 2.5mm thick graphite material.
|
 |
|
Composite Upper Holder For Bumper
#301217
Molded upper bumper holder features removable middle section for front transponder
mounting. Feature molded brackets for Front Anti-Roll Bar Set (#302460).
|
 |
|
Foam Bumper
#301220
High quality foam bumper, hand-cut from specially developed foam material. Very light yet very strong. Protects front of car in serious collisions.
|
 |
|
Precut Foam Bumper For Transponder
#301221
Precut foam bumper is great option if you race at races requiring transponder. The bumper from special foam absorbs all energy from a crash and has a special seeting to fit the transponder.
|
 |
|
Foam Bumper
#301222
High-resilience lightweight foam front bumper. Fits XRAY T2, T3.
|
 |
|
Foam Bumper - Hard
#301223
Foam bumper made from extra hard foam is a direct and perfect fit. Made from lightweight yet very stiff foam, it will protect the car better as it will not yield even in heavy crashes. Recommended for all racing conditions but especially for tracks with rigid or sharp perimeter boards.
|
 |
|
Foam Bumper - Blue
#301225
High quality foam bumper, blue color, made from specially developed foam material. Very light yet very strong. Protects front of car in serious collisions.
|
 |
|
T4 Foam Bumper - Hard
#301226
High-quality hard front foam bumper, hand-cut from specially-developed extra hard foam material. Very light, yet very strong. Protects front of car in serious collisions.
|
 |
|
T4 Foam Bumper Wide - Hard
#301228
High-quality hard front foam bumper, hand-cut from specially-developed extra hard foam material. Protects front of car in serious collisions. Same dimensions as #301227 foam bumper.
|
 |
|
1/12 Foam Bumper
#301229
High-density front foam bumper fits 1:12th scale T1 Mini electric touring car.
|
 |
|
Composite Bumper Rear
#301230
Composite rear bumper protects rear of chassis plate. Fastens to chassis rear with flathead screw and nut.
|
 |
|
T4F Foam Bumper - Light
#301234
High-quality front foam bumper, from high-density foam material. Super-lightweight material makes the bumper very light but effective to protect the front of the car in serious crashes.
|
 |
|
Front Body Mount Set 6mm
#301322
Front body mount set includes redesigned 6mm-thick bodyposts and all other mounting hardware. Fits XRAY T2 and NT1.
|
 |
|
Front Body Mount Set +1mm Height
#301323
XRAY presents +1mm height-adjustable body posts for the T2 and NT1. For serious racers who focus on the small details, body height plays a very important role in the performance of the car and as such, ultra-fine body height tuning was developed by XRAY R&D engineers to address this increasingly important tuning set-up feature.
|
 |
|
Front Body Mount Set +2mm Height
#301324
XRAY presents +2mm height-adjustable body posts for the T2 and NT1. For serious racers who focus on the small details, body height plays a very important role in the performance of the car and as such, ultra-fine body height tuning was developed by XRAY R&D engineers to address this increasingly important tuning set-up feature.
|
 |
|
Composite Front Eccentric 6mm Body Mount Set
#301326
Front body mount set includes 6mm thick body posts made from special composite material that provides maximum strength but sufficient flex to reduce body post breakage in hard crashes or car rollovers.
|
 |
|
Rear Body Mount Set 6mm
#301332
Rear body mount set includes redesigned 6mm-thick bodyposts and all other mounting hardware. Fits XRAY T2 and NT1.
|
 |
|
Rear Body Mount Set +1mm Height
#301333
XRAY presents +1mm height-adjustable body posts for the T2 and NT1. For serious racers who focus on the small details, body height plays a very important role in the performance of the car and as such, ultra-fine body height tuning was developed by XRAY R&D engineers to address this increasingly important tuning set-up feature.
|
 |
|
Rear Body Mount Set +2mm Height
#301334
XRAY presents +2mm height-adjustable body posts for the T2 and NT1. For serious racers who focus on the small details, body height plays a very important role in the performance of the car and as such, ultra-fine body height tuning was developed by XRAY R&D engineers to address this increasingly important tuning set-up feature.
|
 |
|
Composite Rear 6mm Adjustable Body Mount Set
#301336
Rear body mount set includes 6mm thick body posts made from special composite material that provides maximum strength but sufficient flex to reduce body post breakage in hard crashes or car rollovers.
|
 |
|
Alu Adjustable Body Post Stop (2)
#301351-O
Very handy, easily externally adjustable body posts from Swiss 7075 T6 aluminum. Allows for adjustment of body height by 3mm without needing to change the position on the body post.
|
 |
|
Suspension Adjustable Bulkheads + Tool
#302000
Alu Complete set of 4 alu suspension adjustable bulkheads, 4 eccentric nylon hubs, new plastic covers for ball-bearings. Purchasing this complete kit you get FREE new ball-bearings 6x10x3 and 5x9x3 with blue polyamid covers for easy servicing + you get a FREE duraluminum hub insertion/removal tool available only in this complete set.
|
 |
|
Alu Susp. Adjustable Bulkheads T1FK'05 (4)
#302002
Complete set of four Swiss 7075 T6 alu bulkheads for XRAY T1FK’05. Strategically lightened to reduce unnecessary material and weight while retaining high stiffness and rigidity.
|
 |
|
Nylon Hub For Ball-Bearing (4)
#302012
New molded special nylon hubs for ball-bearings 10x15x4 that are pressed into both front and rear bulkheads. These new nylon hubs have been developed to eliminate the small manufacturing tolerances of the ball-bearings. The nylon hubs provide the same performance as the previous duraluminum one.
|
 |
|
T2 Alu Upper Clamp for Bulkheads
#302022
Ultra-light, ultra-strong upper clamp for bulkheads, CNC-machined from premium Swiss T6 7075 aluminum. Identical left/right and front/rear. Fits XRAY T2.
|
 |
|
T2 008 Alu Upper Clamp for Bulkheads
#302023
Ultra-light, ultra-strong upper clamp for bulkheads, CNC-machined from premium Swiss 7075 T6 aluminum. Identical left/right and front/rear. Fits XRAY T2’008.
|
 |
|
T3 Alu Upper Clamp for Bulkheads - Orange
#302024-O
Ultra-light, ultra-strong upper clamp for bulkheads, CNC-machined from premium Swiss 7075 T6 aluminum. Identical left/right and front/rear. Orange color. Fits XRAY T3.
|
 |
|
T3 Alu Upper Clamp with Adj. Roll-Center RR-FL - Orange
#302028-O
Ultra-light, ultra-strong upper clamp for bulkheads with adjustment roll-center positions, CNC-machined from premium Swiss 7075 T6 aluminum, orange color. Roll-center positions provide a great range of adjustments for both front and rear suspension roll centers.
|
 |
|
Alu Nut (2)
#302032
CNC-machined alu nut that holds front lower molded lower suspension holders. Set of two.
|
 |
|
T4F Alu Front Upper Clamp (L+R) - Orange
#302038-O
Ultra-light, ultra-strong front upper clamp for bulkheads CNC-machined from premium Swiss 7075 T6 aluminum. The front upper clamps holds the lay shaft which keeps the design of the car very tidy and very easy for the maintenance of the car.
|
 |
|
Lower 0.75mm Eccentric Suspension Holder (2+2)
#302041
Set of molded composite lower suspension pin holders. The suspension holders have a 0.75mm eccentric hole that lowers the rear roll center. Using the eccentric rear suspension holders will create more rear grip and at the same time increase steering.
|
 |
|
Lower Suspension Holders (2+2+2)
#302044
Molded composite lower suspension pin holders for use in XRAY T2, T3.
Set of 3 pairs of holders offer three different offsets (0mm, -0.75mm, +0.75mm) for easy adjustment of roll center, front dive, and rear squat.
|
 |
|
T3 Alu Lower Suspension Block - Orange
#302045-O
CNC-machined alu lower suspension block which is part of all-new suspension holder system allows suspension arms to be mounted independently from the diff bulkheads. Orange color. Fits XRAY T3.
|
 |
|
T3 Alu Lower Suspension Holder - Orange
#302046-O
CNC-machined alu lower suspension holder which is part of all-new suspension holder system allows suspension arms to be mounted independently from the diff bulkheads. Orange color. Fits XRAY T3.
|
 |
|
Alu Lower Suspension 1-Piece Holder
#302047-O
The optional 1-piece aluminum suspension holder is a direct replacement for the standard rearward holders of the FRONT suspension. The aluminum suspension holder reinforces the chassis and will help to prevent chassis damage in hard crashes. Orange color.
|
 |
|
T3 Alu Lower Rear Suspension 1-Piece Holder - Orange
#302048-O
Optional 1-piece aluminum rear suspension holder is a direct replacement for the standard forward holders of the REAR suspension. This holder is narrower than the rearward holder of the REAR suspension but keeps the same width of the car as with standard T3 holders.
|
 |
|
T4 Alu Lower Suspension Holder - Orange
#302049-O
CNC-machined alu lower suspension holder which is part of suspension holder system allows suspension arms to be mounted independently from the diff bulkheads. Orange color.
|
 |
|
Alu Chassis Brace
#302054
Alu chassis brace is CNC-machined from high-grade aluminum. It is recommended for carpet tracks with medium to super-high traction.
|
 |
|
Alu Chassis Brace - Black
#302054-K
Alu chassis brace is CNC-machined from high-grade aluminum. It is recommended for carpet tracks with medium to super-high traction. Black color.
|
 |
|
Alu Eccentric Front Upper Pivot Pin Holders (4)
#302065
For steering setting and fine tuning
High-quality CNC machined aluminum arm holders are a great add-on for your T1 to help you fine tune your steering. Exchange the standard nylon holder for these alu holders and adjust the steering very precisely - exactly how you will need and require. These eccentric holders will greatly help you to tune and improve the steering characteristic.
|
 |
|
Eccentric Nylon Hub For Bulkhead + Covers (4+2)
#302070
Set of nylon hubs includes: four eccentric hubs for differential ball-bearings, two non-eccentric hubs for layshaft ball-bearings. Eccentric hubs allow for tightening and loosening of front and rear drive belts.
|
 |
|
Eccentric Nylon Hub For Rear Bulkhead (2+2)
#302074
Set of two pairs of composite eccentric hubs for #302002 alu bulkheads for XRAY T1FK’05. Each pair of hubs provides two possible rear differential adjustment positions; entire set provides 4 possible adjustment possibilities.
|
 |
|
T4F Graphite Shock Tower Front 3.0mm
#302081
CNC-machined front shock tower made from 3.0mm thick premium-grade graphite material to guarantee maximum strength and long life. Designed to be used with ULP (Ultra-Low Profile) shocks.
|
 |
|
Graphite Shock Tower Front 3.0mm
#302086
CNC-machined front shock tower made from 3.0mm thick premium-grade graphite material to guarantee maximum strength and long life.
|
 |
|
Graphite Shock Tower Front 3.0mm - V2
#302087
CNC-machined front shock tower made from 3.0mm thick premium graphite material to guarantee maximum strength and long life. Low height allows the new shorter shocks to be mounted lower, thus lowering the CG even more and improving steering response. Specially machined for ultra-low weight without compromising strength. Fits XRAY T2, T3 cars.
|
 |
|
T2R FRP Shock Tower Front
#302088
CNC-machined FRP front shock tower for XRAY T2R includes multiple shock mounting positions and XRAY Quick Roll Center™ positions. Can be upgraded with a T2 graphite front shock tower.
|
 |
|
Shock Tower Front - For Larger Tires
#302092
CNC-machined front shock tower made from highest-quality 2.5mm woven graphite. This is a larger shock tower than the original one and should be used for larger diameter tires.
|
 |
|
Ultra-Tune Shock Tower Front - Graphite
#302093
CNC-machined from 2.5mm top-quality graphite, this front shock tower for the C-hub suspension offers numerous shock upper mounting positions, as well as numerous mounting positions for front upper suspension link.
|
 |
|
Shock Tower Front for Foam Tires - Graphite
#302095
CNC-machined front shock tower made from highest-quality 2.5mm woven graphite. This shock tower is lower than the original, and is designed for use with the optional C-hub suspension and smaller diameter tires with foams.
|
 |
|
Shock Tower Front - Factory Kit
#302096
CNC-machined high-quality graphite front shock tower. Features new shock positions for better suspension adjustment, and new front roll center positions.
|
 |
|
Composite Shock Tower Front
#302097
Molded front shock tower for use with C-hub suspension as well as pivotball suspension.
Features multiple shock mounting positions, as well as numerous mounting positions for front upper suspension link.
|
 |
|
T2 Shock Tower Front 3.0mm Graphite
#302098
CNC-machined 3mm graphite front shock tower for XRAY T2 features optimized shock mounting positions and new Quick Roll Center™ positions. This all-in-one front shock tower has been optimized for use with either rubber or foam tires.
|
 |
|
Shock Tower Front 1/12 − Graphite
#302099
CNC-machined top-quality graphite front shock tower offers numerous shock upper mounting positions, as well as numerous mounting positions for front C-hub upper suspension links.
|
 |
|
C-hub Complete Tuning Set
#302100
Complete tuning set of all composite C-hub suspension parts is a great addition for serious racers to exactly tune the car to any track condition.
|
 |
|
Shock Lower Mounting Brackets
#302120
This great add-on will enable you to very easily and quickly add two additional lower shock mounting positions on the suspension arms for further adjustment possibilities. The bracket gives two additional mounting positions between the standard two shock lower mounting positions at the ends of the arms; the new positions are in line with the suspension arm. CNC-machined from lightweight duraluminum, complete with mounting hardware.
|
 |
|
Suspension Arm Front Lower - C-Hub - Soft
#302150
Suspension Arm Front Lower for C-Hub Suspension Precision-molded front lower suspension arm for C-hub suspension. May be used on either left or right sides.
|
 |
|
Front Suspension Arm - Hard
#302161
Hard molded composite front lower suspension arm. Recommended for use in standard conditions or with rubber tires. Marked with “H’ť for easy identification. May be used on either left or right side.
|
 |
|
Front Suspension Arm - Extra-Hard
#302162
Extra-hard molded composite front lower suspension arm. Recommended for use in high-grip conditions or with foam tires. Marked with “XH’ť for easy identification. May be used on either left or right side.
|
 |
|
Front Susp. Arm - Hard - 1-Hole
#302163
Molded composite front lower suspension. Standard hard-composite mixture arms (labeled “H’ť). The specially-formulated composite material allows for a very light yet very durable suspension arm that can withstand the rigors of high-performance racing with rubber tires. Can be also used for foam tires. Fits XRAY T2, T3 cars.
|
 |
|
Front Susp. Arm - Extra-Hard - 1-Hole
#302164
Molded composite front lower suspension. Extra-hard composite mixture arms (labeled “XH’ť) for high-traction foam-tire racing. The specially-formulated composite material allows for a very light yet very durable suspension arm that can withstand the rigors of high-performance racing with foam tires. Can be also used for rubber tires. Fits XRAY T2, T3 cars.
|
 |
|
Composite Front Susp. Arm 2-Hole - Hard
#302165
Molded composite front lower suspension arms with 2-holes for optional setting. Inner position is used for increased steering, outer position is used for more stable handling. Standard hard-composite mixture arms (labeled “H’ť) for rubber-tire racing. Can be also used for foam tires. Fits XRAY T3.
|
 |
|
Composite Front Susp. Arm 2-Hole - X-Hard
#302166
Molded composite front lower suspension arms with 2-holes for optional setting. Inner position is used for increased steering, outer position is used for more stable handling. Extra-hard composite mixture arms (labeled “XH’ť) for high-traction foam-tire racing. Can be also used for rubber tires. Fits XRAY T3.
|
 |
|
Comp. Front Susp. Arm 1-Hole - Graphite
#302167
Molded lightweight composite front lower suspension arm. The specially-formulated graphite composite material allows for a very light suspension arm that can withstand the rigors of high-performance racing.
|
 |
|
Composite Front Suspension Arm Short - Graphite
#302171-G
The front short arm was redesigned to fit the T4’20 platform. The arm can be used on small technical tracks. Must be used with the optional suspension holders #302710-O and 302720-O.
|
 |
|
Composite Front Suspension Arm Short - Hard
#302171-H
The front short arm was redesigned to fit the T4’20 platform. The arm can be used on small technical tracks. Must be used with the optional suspension holders #302710-O and 302720-O.
|
 |
|
Composite Front Suspension Arm Long Left - Graphite
#302174-G
Completely redesigned front long suspension arm is 7mm longer than the short arms, which helps to generate more grip in low traction conditions and improves stability on higher traction surfaces.
|
 |
|
Ackermann Extension Plate (2)
#302205
Set of CNC-machined graphite extension plates for mounting to steering blocks, providing a different Ackermann setup for improved steering for foam tire carpet racing. Includes all necessary mounting hardware.
|
 |
|
Steering Block Right - Wide
#302211
Molded right steering block for pivotball suspension. For use with short front upper
suspension arm. Standard on T1 EVO2 "FREEDOM OF CHOICE" version.
|
 |
|
Steering Block Left - Wide
#302221
Molded left steering block for pivotball suspension. For use with short front upper
suspension arm. Standard on T1 EVO2 "FREEDOM OF CHOICE" version.
|
 |
|
Composite Steering Block - Medium - V2
#302252
Molded composite steering block of “medium’ť hardness (M) for rubber-tire racing. The steering block features two Ackermann positions, and uses small but robust 5x10 ball-bearings to minimize unsprung weight. Can be also used for foam tires. Fits XRAY T2, T3 cars.
|
 |
|
Composite Steering Block - Hard
#302253
Molded composite steering block of “hard’ť hardness (H) for foam-tire racing. The steering block features two Ackermann positions, and uses small but robust 5x10 ball-bearings to minimize unsprung weight. Can be also used for rubber tires. Fits XRAY T2, T3 cars.
|
 |
|
Composite Steering Block - Graphite
#302254
Molded steering block made from specially-formulated graphite composite material is a perfect balance between reliability and performance.
|
 |
|
Alu Steering Block Right For C-Hub Susp.
#302255
Alu Steering Block Right for C-Hub Suspension CNC-machined highest-quality duraluminum front right steering block for C-hub suspension. Includes two nylon bushings for ball-bearings.
|
 |
|
Alu Steering Block
#302256
Alu Steering Block for XRAY T2 is CNC-machined from premium lightweight T6 aluminum, polished for luxuriuous and stylish appearance. Ultra-strong construction provides very long life and durability in even the most extreme racing conditions.
|
 |
|
Alu Steering Block Left For C-Hub Susp.
#302265
Alu Steering Block Left for C-Hub Suspension CNC-machined highest-quality duraluminum front left steering block for C-hub suspension. Includes two nylon bushings for ball-bearings.
|
 |
|
Alu C-Hub For Steering Block - Caster 0°
#302275
CNC-machined highest-quality duraluminum C-hub with caster pre-set at 0 degrees for maximum off-power steering. Can be used for either left or right steering blocks; use only a matched pair of 0deg C-hubs together.
|
 |
|
Alu C-Hub For Steering Block Left - Caster 6°
#302279
CNC-machined highest-quality duraluminum C-hub for left steering block. Caster pre-set at 6 egrees for maximum on-power steering. Engraved with "L6" to easy identification.
|
 |
|
Composite C-Hub Front Block, Right - Soft - 3°
#302281
Molded C-hub for right steering block. Caster pre-set at 3° for neutral handling. Engraved with "R3" to easy identification. Soft rigidity. Use with left-side composite 3° C-hub (soft) #302283.
|
 |
|
Composite C-Hub Front Block, Right - Medium - 3°
#302282
Molded C-hub for right steering block. Caster pre-set at 3° for neutral handling. Engraved with "R3" to easy identification. Medium rigidity. Use with left-side composite 3° C-hub
(medium) #302284.
|
 |
|
Composite C-Hub Front Block, Left - Soft - 3°
#302283
Molded C-hub for left steering block. Caster pre-set at 3° for neutral handling. Engraved with "L3" to easy identification. Soft rigidity. Use with right-side composite 3° C-hub (soft) #302281.
|
 |
|
Composite C-Hub Front Block, Left - Medium - 3°
#302284
Molded C-hub for left steering block. Caster pre-set at 3° for neutral handling. Engraved with "L3" to easy identification. Medium rigidity. Use with right-side composite 3° C-hub
(medium) #302282.
|
 |
|
Composite C-Hub Front Block, Right - Soft - 6°
#302285
Molded C-hub for right steering block. Caster pre-set at 6° for maximum on-power steering. Engraved with "R6" to easy identification. Soft rigidity. Use with left-side composite 6° C-hub (soft) #302287.
|
 |
|
Composite C-Hub Front Block, Right - Medium - 6°
#302286
Molded C-hub for right steering block. Caster pre-set at 6° for maximum on-power steering. Engraved with "R6" to easy identification. Medium rigidity. Use with left-side composite 6° C-hub (medium) #302288.
|
 |
|
Composite C-Hub Front Block, Left - Soft - 6°
#302287
Molded C-hub for left steering block. Caster pre-set at 6° for maximum on-power steering. Engraved with "L6" to easy identification. Soft rigidity. Use with right-side composite 6° C-hub (soft) #302285.
|
 |
|
Composite C-Hub Front Block, Left - Medium - 6°
#302288
Molded C-hub for left steering block. Caster pre-set at 6° for maximum on-power steering. Engraved with "L6" to easy identification. Medium rigidity. Use with right-side composite 6° C-hub (medium) #302286.
|
 |
|
C-Hub Bushing (4)
#302290
Precision-machined bushing for front C-hub steering block pivot screws.
Set of 4.
|
 |
|
Steel Steering Bushing (2+2)
#302291
Precision-machined bushing for front C-hub steering block pivot screws on XRAY T2, T3. Includes 4 pieces: 2 short + 2 long.
|
 |
|
Ball-Bearing Composite Bushing (4)
#302295
Molded composite bushings for installing ball-bearings in alu steering blocks (302256) and alu rear uprights (303358 and 303359). Set of 4.
|
 |
|
Composite C-Hub Front Block, Right - Hard - 3°
#302325
Molded C-hub for right steering block. Caster pre-set at 3° for neutral handling. Engraved with "R3" to easy identification. Hard rigidity. Use with left-side composite 3° C-hub (hard) #302326.
|
 |
|
Composite C-Hub Front Block, Left - Hard - 3°
#302326
Molded C-hub for left steering block. Caster pre-set at 3° for neutral handling. Engraved with "L3" to easy identification. Hard rigidity. Use with right-side composite 3° C-hub (hard) #302325.
|
 |
|
Composite C-Hub Front Block, Right - Medium - 4.5°
#302327
Molded C-hub for right steering block. Caster pre-set at 4.5° for more on-power steering. Engraved with "R4.5" to easy identification. Medium rigidity. Use with left-side composite 4.5° C-hub (medium) #302328.
|
 |
|
Composite C-Hub Front Block, Left - Medium - 4.5°
#302328
Molded C-hub for left steering block. Caster pre-set at 4.5° for more on-power steering. Engraved with "L4.5" to easy identification. Medium rigidity. Use with right-side composite 4.5° C-hub (medium) #302327.
|
 |
|
Composite C-Hub Front Block, Right - Hard - 4.5°
#302329
Molded C-hub for right steering block. Caster pre-set at 4.5° for more on-power steering. Engraved with "R4.5" to easy identification. Hard rigidity. Use with left-side composite 4.5° C-hub (hard) #302330.
|
 |
|
Composite C-Hub Front Block, Left - Hard - 4.5°
#302330
Molded C-hub for left steering block. Caster pre-set at 4.5° for more on-power steering. Engraved with "L4.5" to easy identification. Hard rigidity. Use with right-side composite 4.5° C-hub (hard) #302329.
|
 |
|
Composite C-Hub Front Block, Right - Hard - 6°
#302331
Molded C-hub for right steering block. Caster pre-set at 6° for maximum on-power steering. Engraved with "R6" to easy identification. Hard rigidity. Use with left-side composite 6° C-hub (hard) #302332.
|
 |
|
Composite C-Hub Front Block, Left - Hard - 6°
#302332
Molded C-hub for left steering block. Caster pre-set at 6° for maximum on-power steering. Engraved with "L6" to easy identification. Hard rigidity. Use with right-side composite 6° C-hub (hard) #302331.
|
 |
|
Alu C-Hub Block - Caster 0° - Orange
#302334
CNC-machined highest-quality duraluminum C-hub for XRAY T4. Caster pre-set at 0 degrees. Engraved with "0" for easy identification. Fits left or right sides. Includes two nylon bushings.
|
 |
|
Alu C-Hub Front Block Right - Caster 4° - Orange
#302337
CNC-machined highest-quality duaraluminum C-hub for right steering block of T2, T3. Caster pre-set at 4°. Engraved with "R4" to easy identification. Includes two nylon bushings. Use with left-side alu 4° C-hub #302338.
|
 |
|
Alu C-Hub Front Block Left - Caster 4° - Orange
#302338
CNC-machined highest-quality duaraluminum C-hub for left steering block of T2, T3. Caster pre-set at 4°. Engraved with "L4" to easy identification. Includes two nylon bushings. Use with right-side alu 4° C-hub #302337.
|
 |
|
Alu C-Hub Front Block Right - Caster 6° - Orange
#302339
CNC-machined highest-quality duaraluminum C-hub for right steering block of T2, T3. Caster pre-set at 6°. Engraved with "R6" to easy identification. Includes two nylon bushings. Use with left-side alu 6° C-hub #302340.
|
 |
|
Alu C-Hub Front Block Left - Caster 6° - Orange
#302340
CNC-machined highest-quality duaraluminum C-hub for left steering block of T2, T3. Caster pre-set at 6°. Engraved with "L6" to easy identification. Includes two nylon bushings. Use with right-side alu 6° C-hub #302339.
|
 |
|
Composite C-Hub Front Block, Right - 4° Deg.
#302345
Molded composite C-hub for front right steering block on XRAY T2, T3. Caster pre-set at 4° for neutral handling. Engraved with "4R" for easy identification. Use with left-side composite 4° C-hub #302346.
|
 |
|
Composite C-Hub Front Block, Left - 4° Deg.
#302346
Molded composite C-hub for front left steering block on XRAY T2, T3. Caster pre-set at 4° for neutral handling. Engraved with "4L" for easy identification. Use with left-side composite 4° C-hub #302345.
|
 |
|
Composite C-Hub Right - 2° Deg. - Medium (ECS)
#302361
Molded composite C-hub for right steering block of T2, T3. Caster pre-set at 2°. Medium rigidity for rubber-tire racing. Use with matching left-side C-hub #302362. Can be also used for foam tires.
|
 |
|
Composite C-Hub Left - 2° Deg. - Medium (ECS)
#302362
Molded composite C-hub for left steering block of T2, T3. Caster pre-set at 2°. Medium rigidity for rubber-tire racing. Use with matching right-side C-hub #302361. Can be also used for foam tires.
|
 |
|
Composite C-Hub Right - 4° Deg. - Medium
#302363
Molded composite C-hub for right steering block of T2, T3. Caster pre-set at 4°. Medium rigidity for rubber-tire racing. Use with matching left-side C-hub #302364. Can be also used for foam tires.
|
 |
|
Composite C-Hub Left - 4° Deg. - Medium
#302364
Molded composite C-hub for left steering block of T2, T3. Caster pre-set at 4°. Medium rigidity for rubber-tire racing. Use with matching right-side C-hub #302363. Can be also used for foam tires.
|
 |
|
Composite C-Hub Right - 6° Deg. - Medium (ECS)
#302365
Molded composite C-hub for right steering block of T2, T3. Caster pre-set at 6°. Medium rigidity for rubber-tire racing. Use with matching left-side C-hub #302366. Can be also used for foam tires.
|
 |
|
Composite C-Hub Left - 6° Deg. - Medium (ECS)
#302366
Molded composite C-hub for left steering block of T2, T3. Caster pre-set at 6°. Medium rigidity for rubber-tire racing. Use with matching right-side C-hub #302365. Can be also used for foam tires.
|
 |
|
Composite C-Hub Right - 0° Deg. - Hard (ECS)
#302369
Molded composite C-hub for right steering block. Caster pre-set at 0°. HARD rigidity for rubber-tire racing and also foam tire racing. Use with matching left-side C-hub #302370.
|
 |
|
Composite C-Hub Left - 0° Deg. - Hard (ECS)
#302370
Molded composite C-hub for left steering block. Caster pre-set at 0°. HARD rigidity for rubber-tire racing and also foam tire racing. Use with matching right-side C-hub #302369.
|
 |
|
Composite C-Hub Right - 2° Deg. - Hard (ECS)
#302371
Molded composite C-hub for right steering block of T2, T3. Caster pre-set at 2°. Hard rigidity for foam-tire racing. Use with matching left-side C-hub #302372. Can be also used for rubber tires.
|
 |
|
Composite C-Hub Left - 2° Deg. - Hard (ECS)
#302372
Molded composite C-hub for left steering block of T2, T3. Caster pre-set at 2°. Hard rigidity for foam-tire racing. Use with matching right-side C-hub #302371. Can be also used for rubber tires.
|
 |
|
Composite C-Hub Right - 4° Deg. - Hard (ECS)
#302373
Molded composite C-hub for right steering block of T2, T3. Caster pre-set at 4°. Hard rigidity for foam-tire racing. Use with matching left-side C-hub #302374. Can be also used for rubber tires.
|
 |
|
Composite C-Hub Left - 4° Deg. - Hard (ECS)
#302374
Molded composite C-hub for left steering block of T2, T3. Caster pre-set at 4°. Hard rigidity for foam-tire racing. Use with matching right-side C-hub #302373. Can be also used for rubber tires.
|
 |
|
Composite C-Hub Right - 6° Deg. - Hard
#302375
Molded composite C-hub for right steering block of T2, T3. Caster pre-set at 6°. Hard rigidity for foam-tire racing. Use with matching left-side C-hub #302376. Can be also used for rubber tires.
|
 |
|
Composite C-Hub Left - 6° Deg. - Hard
#302376
Molded composite C-hub for left steering block of T2, T3. Caster pre-set at 6°. Hard rigidity for foam-tire racing. Use with matching right-side C-hub #302375. Can be also used for rubber tires.
|
 |
|
Anti-roll Bar Set Front Adjustable
#302400
Optional adjustable front anti-roll bar for XRAY T1. If you are racing on a high traction surface and your car tends to oversteer, use this optional anti-roll bar kit. This will decrease the front chassis roll and decrease steering throughout the corner. This will give your car more rear traction.
|
 |
|
Anti-Roll Bar Front (Set)
#302401
If your XRAY T2, T3 is oversteering, then try this optional front anti-roll bar set. The front anti-roll bar will decrease front chassis roll and decrease front traction, reducing your car’s steering. This complete front anti-roll bar set for the XRAY T2, T3 includes all necessary hardware, and includes three different anti-roll bars: 1.2, 1.4, and 1.6mm.
|
 |
|
Anti-Roll Bar - Female
#302440
Front female anti-roll bar. Manufactured from world-renowned top-secret "Hudy Spring Steel". Maximum precision and quality.
|
 |
|
Anti-Roll Bar - Male
#302450
Front male anti-roll bar. Manufactured from world-renowned top-secret "Hudy Spring Steel". Maximum precision and quality.
|
 |
|
Anti-Roll Bar Front 2mm (Set)
#302460
If your car is oversteering, then try this optional front anti-roll bar set. The front anti-roll bar will decrease front chassis roll and decrease front traction, reducing your car’s steering.
This complete front anti-roll bar set is designed for use with the composite front upper bumper holder (#301217) which has molded-in mounts. The kit includes a 2.0mm anti-roll bar.
|
 |
|
Anti-Roll Bar Front 2 mm
#302470
Optional front anti-roll bar (2.0mm thick) provides stiffness adjustment of the front anti-roll bar. This is the STIFFEST front anti-roll bar for use with the #302460 Front Anti-Roll Bar Set.
|
 |
|
Anti-Roll Bar Front 1 mm
#302471
Optional front anti-roll bar (1.0mm thick) has 2 ground surfaces. This provides stiffness adjustment of the front anti-roll bar. This is the SOFTEST front anti-roll bar for use with the
#302460 Front Anti-Roll Bar Set.
|
 |
|
Anti-Roll Bar Front 1.5 mm
#302472
Optional front anti-roll bar (1.5mm thick) has 1 ground surface. This provides stiffness adjustment of the front anti-roll bar. This is the MEDIUM front anti-roll bar for use with the
#302460 Front Anti-Roll Bar Set.
|
 |
|
Anti-Roll Bar Front 1.2mm
#302482
Front anti-roll bar, 1.2mm dia, gold colour. Same bar as included in #302401 Front Anti-Roll Bar Set.
|
 |
|
Anti-Roll Bar Front 1.3mm
#302483
Front anti-roll bar, 1.3mm dia, black colour. Optional bar for #302401 Front Anti-Roll Bar Set. Marked with 3 laser-engraved lines for easy identification.
|
 |
|
Anti-Roll Bar Front 1.4mm
#302484
Front anti-roll bar, 1.4mm dia, silver colour. Same bar as included in #302401 Front Anti-Roll Bar Set.
|
 |
|
Anti-Roll Bar Front 1.5mm
#302485
Front anti-roll bar, 1.5mm dia, black colour. Optional bar for #302401 Front Anti-Roll Bar Set. Marked with 5 laser-engraved lines for easy identification.
|
 |
|
Anti-Roll Bar Front 1.6mm
#302486
Front anti-roll bar, 1.6mm dia, black colour. Same bar as included in #302401 Front Anti-Roll Bar Set.
|
 |
|
Anti-Roll Bar Front 1.8mm
#302488
Front anti-roll bar, 1.8mm dia, black colour. Optional bar for #302401 Front Anti-Roll Bar Set. Marked with 8 laser-engraved lines for easy identification.
|
 |
|
Dual-Ackerman Central Servo Saver
#302501
This new servo-saver assembly, pre-assembled, has two positions at which to mount the steering arm pivots. Mounting the pivots in these different holes provides different steering Ackerman effects. Great for adjust steering sensitivity.
|
 |
|
Servo Saver T1FK'05
#302502
Factory pre-assembled servo-saver set for XRAY T1FK’05 with optimized Ackermann position.
|
 |
|
T2 Servo Saver (Set)
#302503
Factory pre-assembled servo-saver set for XRAY T2 with optimized Ackermann position.
|
 |
|
XRAY Quick-Saver™ - Adjustable Servo Saver Set
#302504
XRAY Quick-Saver™ servo saver set allows quick and easy adjustment of steering Ackermann at the central servo saver, with 5 settings available. The servo saver comes factory pre-built, guaranteeing exceptionally smooth, responsive, and precise steering. The alloy central shaft holds a pre-built strong preload spring.
|
 |
|
XRAY Quick-Saver™ - Adjustable Servo Saver Set - Orange
#302504-O
XRAY Quick-Saver™ servo saver set allows quick and easy adjustment of steering Ackermann at the central servo saver, with 5 settings available. The servo saver comes factory pre-built, guaranteeing exceptionally smooth, responsive, and precise steering. The alloy central shaft holds a pre-built strong preload spring. Orange colour.
|
 |
|
XRAY T3 Quick-Saver - Adjustable Servo Saver Set - Black
#302505-K
XRAY Quick-Saver™ servo saver set allows quick and easy adjustment of steering Ackermann at the central servo saver, with 5 settings available. The servo saver comes factory pre-built, guaranteeing exceptionally smooth, responsive, and precise steering. Fits XRAY T3.
|
 |
|
Alu Dual Servo Saver Arm + Ball-Bearings (L+R)
#302515
Set of 2 alu arms (L+R) for dual servo saver. Ultra-strong construction provides long life and durability in even the most extreme racing conditions. CNC-machined from premium Swiss 7075 T6 aluminum for superior strength and reliability, this is a direct replacement for the composite servo saver arms. Includes ball-bearings. Orange anodized.
|
 |
|
Alu Brace Post for Dual Servo Saver (2)
#302541
CNC-machined alu brace post for dual servo saver. To increase the stiffness of the car, these alu stands can be mounted between the dual servo saver steering stands and the top deck.
|
 |
|
Graphite Steering Plate Set
#302570
Smart chassis flex adjustment via graphite steering plate which can be mounted with an additional aluminum stand.
|
 |
|
Alu Adjustable Turnbuckle 39mm M3 L/R - Orange (2)
#302612-O
For serious racers who are conscious of weight savings, XRAY offers adjustable left & right M3 steering turnbuckles manufactured from strong, lightweight 7075 T6 aluminum. Lighter by 50%. Precision threading for fine toe adjustment. Length of 39mm. Orange color. Set of 2.
|
 |
|
Ball End 4.9mm With Thread 6mm (2)
#302653
Threaded 4.9mm ball end with 6mm thread for rear suspension on T2 family of cars to replace the ball + screw assembly. These balls are great for use with closed composite ball joints #302661 but also work with standard open ball joints. Set of 2.
|
 |
|
Ball End 4.9mm With Thread 8mm - V2 (2)
#302654
Threaded 4.9mm ball end with 8mm thread for front suspension on T2 family of cars to replace the ball + screw assembly. These balls are great for use with closed composite ball joints #302661 but also work with standard open ball joints. Set of 2.
|
 |
|
Ball End 4.9mm With Thread 10mm (2)
#302655
Threaded 4.9mm ball end with 10mm thread replaces ball+screw assembly on front suspension of the T2 & T3 family of cars. These ball ends are great for use with closed composite ball-joints #302661 but also work with standard open ball-joints. Set of 2.
|
 |
|
Composite Ball Joint 4.9mm - Closed (4)
#302661
Molded composite steering ball-joint for T2 family of cars and T3. Fits 4.9mm pivot ball or ball stud. Set of 4.
The closed ball joint prevents dust from getting onto the ball end, allowing the upper camber links to move more freely. The closed ball joints must be used with ball ends #302653 or #302654; these ball ends are available in two lengths for front and rear suspension, respectively.
|
 |
|
Alu Front Lower 1-Piece Suspension Holder - Front - FF
#302710-O
Authentic XRAY alu front lower suspension holder for the FRONT of the front bulkhead on the T4’14. CNC-machined from premium Swiss 7075 T6 aluminum. Designed to fit new composite eccentric bushings 362315 to increase geometry adjustment.
|
 |
|
Brass Front Lower 1-Piece Suspension Holder - Front - FF
#302711
Authentic XRAY brass front lower suspension holder for the FRONT of the front bulkhead. Adds additional weight to the car to attain the minimum weight limit, and replaces other chassis-mounted weights which negatively influence chassis flex.
|
 |
|
Alu Front Lower 1-Piece Suspension Holder - Rear - FR
#302720-O
Authentic XRAY alu rear lower suspension holder for the REAR of the front bulkhead on the T4’14. CNC-machined from premium Swiss 7075 T6 aluminum, the suspension holder reinforces the chassis and will help to prevent chassis damage in hard crashes.
|
 |
|
Brass Front Lower 1-Piece Suspension Holder - Rear - FR
#302721
Authentic XRAY brass front lower suspension holder for the REAR of the front bulkhead. Adds additional weight to the car to attain the minimum weight limit, and replaces other chassis-mounted weights which negatively influence chassis flex.
|
 |
|
T4'18 Alu Motor Mount - Orange
#303002-O
CNC-machined motor mount made from premium Swiss 7075 T6 is part of the left layshaft bulkhead to eliminate unwanted tweak.
|
 |
|
T4'19 Alu Motor Mount - Orange
#303006-O
CNC-machined motor mount made from premium Swiss 7075 T6 is part of the left layshaft bulkhead to eliminate unwanted tweak.
|
 |
|
T4F Alu Motor Mount - Orange
#303008-O
CNC-machined motor mount made from premium Swiss 7075 T6 is part of the left layshaft bulkhead to eliminate unwanted tweak.
|
 |
|
T3 Alu Layshaft Bulkhead Right - Orange
#303014-O
CNC-machined right-side layshaft bulkhead made from premium Swiss 7075 T6 aluminum. Layshaft bulkhead is independently mounted from the top deck for better flex adjustment. Orange color. Fits XRAY T3.
|
 |
|
Alu Roll Center Bridge
#303030
Simple - smart - stunning - stylish.
A great, stylish-looking option part CNC machined from high-quality duraluminum will not only add executive look of your T1 but will also enable you to adjust the roll center very easily with 2 different roll center mounting positions. Mount this bridge between both rear bulkheads and insert the adjustable ball of the camber link into the inner position to change the roll center.
|
 |
|
Roll Center Alu Holder - Set (2)
#303031
This set is used to relocate the inner mounting points for the rear camber links. Used with #303093 rear shocktower to utilize shorter camber links with short arm suspension, and also allows changes to rear roll center. Set includes alu pivot ball posts and mounting hardware.
|
 |
|
Alu Quick Roll-Center Holder™ 4.9mm − L1+L2 (2)
#303033
4.9mm alu quick roll-center holders allows you to make the upper linkage longer in either front or rear suspension of all T2, T3 cars. Includes a pair of roll centers marked L1 and L2.
|
 |
|
Alu Quick Roll-Center Holder™ 4.9mm H1 + H2
#303035
Matched pair of CNC-machined high-grade aluminum holders ’” marked H1 and H2 − 1mm higher with the same length than L1 + L2 (lower) holders, allowing car to roll more. May be used at either front or rear.
|
 |
|
T2R FRP Rear Upper Deck
#303038
CNC-machined FRP rear upper deck for XRAY T2R with MFT™ attachment points. Can be upgraded with a T2 graphite rear upper deck.
|
 |
|
T2 007 Rear Upper Deck 2.5mm Graphite - Wide
#303044
CNC-machined rear upper deck made from premium grade 2.5mm graphite material. The rear upper deck was redesigned to provide optimized Multi-Flex Technology™ flex points. Featuring two MFT™ positions, with the outer positions recommended for super-high grip tracks or when using foam tires.
|
 |
|
T2 008 Rubber-Spec Rear Upper Deck Graphite
#303046
CNC-machined rear upper deck made from premium graphite material to guarantee maximum strength and long life. Fits XRAY T2’008. Strategically designed for rubber-tire racing.
|
 |
|
T2 008 Foam-Spec Rear Upper Deck Graphite
#303047
CNC-machined rear upper deck made from premium graphite material to guarantee maximum strength and long life. Fits XRAY T2’008. Strategically designed for foam-tire racing, includes arm extensions for alum chassis braces.
|
 |
|
Central Motor Mount
#303050
Swiss 7075 T6 alum CNC-machined motor mount for XRAY T1FK’05, keys to lower chassis and upper deck for increased chassis rigidity.
|
 |
|
T3 Alu Motor Mount Bulkhead - Orange
#303052-O
CNC-machined motor-mount bulkhead made from premium Swiss 7075 T6 aluminum. Motor mount bulkhead has been purpose-designed to accommodate either brushed or brushless motors, placing the motor 3mm more towards the centerline. Motor mount bulkhead features the lowest possible motor position, compatible with stock, modified, and brushless motors. Orange color. Fits XRAY T3.
|
 |
|
T4 Alu Motor Mount - Orange
#303055-O
All-new motor mount CNC-machined from premium Swiss 7075 T6 aluminum and color-coated for a distinctive look.
|
 |
|
T4'14 Alu Motor Mount - Orange
#303057-O
CNC-machined motor mount made from premium Swiss 7075 T6 aluminum. The motor mount has been isolated from the layshaft bulkhead in order to eliminate unwanted tweak and increase rear traction.
|
 |
|
T3 Alu Motor Bulkhead Holder - Black
#303059-K
Alu motor holder connects the motor mount bulkhead to the center of the chassis, this transfers the flex effect of the motor mount into the absolute centerline of the chassis. Black color. Fits XRAY T3.
|
 |
|
Graphite Motor Guard
#303060
CNC-machined graphite motor guard for T1FK’05 and T2 protects the motor endbell from collisions. Includes mounting hardware.
|
 |
|
T4'17 Alu Motor Mount - Orange
#303067-O
CNC-machined motor mount made from premium Swiss 7075 T6 is part of the left layshaft bulkhead to eliminate unwanted tweak.
|
 |
|
Belt Tensioner Set T2'007, T2'008, T2'009, T3
#303071
Smart, easy-to-use XRAY Belt Tensioner Set for controlling center drive belt tension and twisting. High-quality components include CNC-machined lightweight alu mounting post, high-speed ball-bearings, and mounting hardware. Fits T2'007, T2'008, T2'009, T3 cars.
|
 |
|
T4F Graphite Shock Tower Rear 3.0mm
#303081
CNC-machined rear shock tower made from 3.0mm thick premium-grade graphite material to guarantee maximum strength and long life. Designed to be used with ULP (Ultra-Low Profile) shocks.
|
 |
|
T4 Graphite Shock Tower Rear 3.0mm
#303086
CNC-machined rear shock tower made from 3.0mm thick premium-grade graphite material to guarantee maximum strength and long life.
|
 |
|
T2R FRP Shock Tower Rear
#303088
CNC-machined FRP rear shock tower for XRAY T2R includes multiple shock mounting positions and XRAY Quick Roll Center™ positions. Can be upgraded with a T2 graphite rear shock tower.
|
 |
|
T3 Graphite Shock Tower Rear 3.0mm
#303089
CNC-machined super-low rear shock tower made from 3.0mm thick premium graphite material to guarantee maximum strength and long life. Low height allows the new shorter shocks to be mounted lower, thus lowering the CG even more and improving steering response. Fits XRAY T3.
|
 |
|
Ultra-Tune Shock Tower Rear - 2.5mm Graphite
#303091
CNC-machined rear shock tower made from highest-quality 2.5mm woven graphite. Numerous positioning holes for upper shock mounting as well as upper camber link mounting. These strategically-placed positioning holes provide ultimate tunability of your car's rear suspension to suit any track condition.
|
 |
|
Shock Tower Rear - Factory Kit
#303093
CNC-machined rear shock tower made from highest-quality 2.5mm woven graphite. Optimized positioning holes for upper shock mounting as well as upper camber link mounting.
|
 |
|
T2 Shock Tower Rear 3.0mm Graphite
#303094
CNC-machined 3mm graphite rear shock tower for XRAY T2 features optimized shock mounting positions and new Quick Roll Center™ positions. This all-in-one rear shock tower has been optimized for use with either rubber or foam tires.
|
 |
|
T2 Shock Tower Rear 3.5mm Graphite - Ultra Strong
#303095
This stronger rear shock tower for T2 & T2'007 is CNC-machined from premium extra thick 3.5mm graphite. This will minimize breakage and is a great valuable option part for any drivers who want to have a safe drive.
|
 |
|
T2 008 Shock Tower Rear 3.0mm Graphite
#303096
CNC-machined rear shock tower made from 3mm premium graphite material to guarantee maximum strength and long life. Low height allows the new shorter shocks to be mounted lower, thus lowering the CG even more and improving steering response. Specially machined for ultra-low weight without compromising strength. Fits XRAY T2’008.
|
 |
|
Composite Shock Tower Rear
#303097
Molded rear shock tower features multiple shock mounting positions. Feature molded brackets for optional Rear Anti-Roll Bar Set (#303400).
|
 |
|
T2 008 Shock Tower Rear 3.5mm Graphite - Ultra Strong
#303098
Strong rear shock tower for T2'008, T2'009 and T2R PRO is CNC-machined from premium extra-thick 3.5mm high-grade graphite to minimize breakage. Features same shock and roll center positions as the stock shock tower but with increased strength and reliability for high-competition racing or extreme racing conditions. A great option part to help insure a safe drive.
|
 |
|
Shock Tower Rear 1/12 − Graphite
#303099
CNC-machined top-quality graphite rear shock tower for the T1M Mini offers numerous shock upper mounting positions, as well as numerous mounting positions for rear C-hub upper suspension links.
|
 |
|
Suspension Arm Rear Lower EVO2
#303111
Molded rear lower suspension arm. May be used on either left or right sides. Additional shock mounting positions.
|
 |
|
Alu Rear Lower Arm
#303115
CNC-machined high-quality aluminum rear lower arm with 3 different shock mounting positions. The arm is hard coated for a long life. These arms will make the rear of the car more stiff, increasing steering slightly. It is advised to use these rear alu arms for high-grip tracks.
|
 |
|
Set of Alu Shims (1.0mm, 2.0mm, 3.0mm) – Silver
#303120
Ultimate assortment of set-up shims. You can use the shims for easy and accurate adjustment of:
- front and rear roll center
- front bump steer
- front and rear toe-in
- wheelbase
|
 |
|
Set of Alu Shims (1.0mm, 2.0mm, 3.0mm) – Blue
#303121
Ultimate assortment of set-up shims. You can use the shims for easy and accurate adjustment of:
• front and rear roll center
• front bump steer
• front and rear toe-in
• wheelbase
|
 |
|
Alu Shim 3x6x13.0mm - Orange (2)
#303135-O
Alu shims 3x6mm, 13mm thick which can be used for various purposes. Orange color; color may slightly vary between products. Set of 2.
|
 |
|
Alu Shim 3x7x1.0mm (10)
#303136
Alu shims 3x7mm, 1mm thick can be used for various purposes such as ride height & roll center adjustment. The shims fit perfectly under the front arm mount plate and graphite lower suspension arm stands. Set of 10.
|
 |
|
Alu Shim 3x5x2.0mm - Orange (10)
#303140-O
Alu shims 3x5mm, 2.0mm thick which can be used for various purposes including roll center adjustment. Orange color. Set of 10.
Color may slightly vary between products.
|
 |
|
Alu Shim 3x5x1.0 (10)
#303141
Alu shims, 1.0mm thick, for rear roll center adjustment on XRAY T2. Set of 10.
|
 |
|
Alu Shim 3x5x0.5mm - Orange (10)
#303142-O
Alu shims 3x5mm, 0.5mm thick which can be used for various purposes including roll center adjustment. Orange color. Set of 10.
|
 |
|
Alu Shim 3x5x0.25mm (10)
#303143
Alu shims 3x5mm, 0.25mm thick which can be used for various purposes including roll center adjustment. Set of 10.
|
 |
|
Rear Suspension Arm - Hard
#303161
Hard molded composite rear lower suspension arm. Recommended for use in standard conditions or with rubber tires. Marked with “H’ť for easy identification. May be used on either left or right side.
|
 |
|
Rear Suspension Arm - Extra-Hard
#303162
Extra-hard molded composite rear lower suspension arm. Recommended for use in high-grip conditions or with foam tires. Marked with “XH’ť for easy identification. May be used on either left or right side.
|
 |
|
Composite Rear Susp. Arm 1-Hole - Hard - V2
#303163
Molded composite rear lower suspension arm of standard hard-composite mixture (labeled “H’ť) for rubber-tire racing. The specially-formulated composite material allows for a very light yet very durable suspension arm that can withstand the rigors of high-performance racing with rubber tires. Can be also used for foam tires. Fits XRAY T2, T3 cars.
|
 |
|
Composite Rear Susp. Arm 1-Hole - Extra-Hard - V2
#303164
Molded composite rear lower suspension arm of extra-hard composite mixture (labeled “XH’ť) for foam-tire racing. The specially-formulated composite material allows for a very light yet very durable suspension arm that can withstand the rigors of high-performance racing with foam tires. Can be also used for rubber tires. Fits XRAY T2, T3 cars.
|
 |
|
Composite Rear Susp. Arm 2-Hole - Hard
#303165
Molded composite rear lower suspension arms with 2-holes for optional setting. Inner position is used for increased steering, outer position is used for more stable handling. Standard hard-composite mixture arms (labeled “H’ť) for rubber-tire racing. The specially-formulated composite material allows for a very light yet very durable suspension arm that can withstand the rigors of high-performance racing with rubber tires. Can be also used for foam tires. Fits XRAY T2, T3 cars.
|
 |
|
Composite Rear Susp. Arm 2-Hole - X-Hard
#303166
Molded composite rear lower suspension arms with 2-holes for optional setting. Inner position is used for increased steering, outer position is used for more stable handling. Extra-hard composite mixture arms (labeled “XH’ť) for foam-tire racing. The specially-formulated composite material allows for a very light yet very durable suspension arm that can withstand the rigors of high-performance racing with foam tires. Can be also used for rubber tires. Fits XRAY T2, T3 cars.
|
 |
|
Comp. Rear Susp. Arm 1-Hole - Graphite
#303167
Molded lightweight composite rear lower suspension arm. The specially-formulated graphite composite material allows for a very light yet suspension arm that can withstand the rigors of high-performance racing.
|
 |
|
Composite Rear Suspension Arm Long Right - Graphite
#303173-G
Completely redesigned rear long suspension arm is 7mm longer than the short arms, which helps to generate more grip in low traction conditions and improves stability on higher traction surfaces.
|
 |
|
Composite Rear Suspension Arm Long Left - Graphite
#303174-G
Completely redesigned rear long suspension arm is 7mm longer than the short arms, which helps to generate more grip in low traction conditions and improves stability on higher traction surfaces.
|
 |
|
Adj. Rear Turnbuckle L/R 25mm (2+4)
#303200
Adjustable turnbuckle set for adjusting camber of rear uprights. Includes four molded ball joints and two turnbuckles manufactured from world-renowned top-secret "Hudy Spring Steel".
|
 |
|
Alu Adjustable Turnbuckle 26mm M3 L/R - Orange (2)
#303212-O
For serious racers who are conscious of weight savings, XRAY offers adjustable left & right M3 steering turnbuckles manufactured from strong, lightweight 7075 T6 aluminum. Lighter by 50%. Precision threading for fine toe adjustment. Length of 26mm. Orange color. Set of 2.
|
 |
|
Adjustable 5.8mm Ball End - Spring Steel (2)
#303230
Ball end manufactured from world-renowned top-secret "Hudy Spring Steel" to which rear upper camber links attach. Can be adjusted into and out of rear bulkheads to compensate for wheelbase changes. Set of two.
|
 |
|
Adjustable 4.9 mm Ball End - Spring Steel (2)
#303231
Ball end manufactured from world-renowned top-secret "Hudy Spring Steel" to which rear upper camber links attach. Can be adjusted into and out of rear bulkheads to compensate for wheelbase changes. Set of two.
|
 |
|
Upright Rear
#303310
Molded rear upright. Can be used for both left and right side.
|
 |
|
Composite Upright 1° Outboard Toe-In - Right - Medium
#303351
Molded-composite right rear upright features built-in 1° of outboard toe-in to improve the rotation of the car in corners and prevent suspension geometry changes in serious crashes. Medium rigidity (labeled “M’ť) specially optimized for rubber-tire racing. Use with matching left-side rear upright 303361. Can be also used for foam tires.
|
 |
|
Composite Upright 0° Outboard Toe-In - Medium
#303352
Molded-composite rear upright features built-in 0° of outboard toe to improve traction and prevent suspension geometry changes in serious crashes. Medium rigidity (labeled “M’ť) specially optimized for rubber-tire racing. Use on both left and right sides of the car. Can be also used for foam tires.
|
 |
|
Composite Upright 1° Outboard Toe-In - Right - Hard
#303353
Molded-composite right rear upright features built-in 1° of outboard toe-in to improve the rotation of the car in corners and prevent suspension geometry changes in serious crashes. Hard rigidity (labeled “H’ť) specially optimized for foam-tire racing. Use with matching left-side rear upright 303363. Can be also used for rubber tires.
|
 |
|
Composite Upright 0° Outboard Toe-In - Hard
#303354
Molded-composite rear upright features built-in 0° of outboard toe to improve traction and prevent suspension geometry changes in serious crashes. Hard rigidity (labeled “H’ť) specially optimized for foam-tire racing. Use on both left and right sides of the car. Can be also used for rubber tires.
|
 |
|
Alu Upright Rear For C-Hub Suspension
#303355
CNC-machined rear upright for C-hub suspension is made from highest-quality duraluminum. Can be used on either left or right side. Includes two nylon bushings for ball-bearings.
|
 |
|
Alu Upright Rear 1° Outboard Toe-In (L+R)
#303356
CNC-machined rear upright made from highest-quality duraluminum features an integrated 1° outboard toe-in. Use the outboard toe-in will increase the corner speed. Complete set of left and right blocks. Includes composite bushings for ball-bearings.
|
 |
|
Alu Upright Rear 2° Outboard Toe-In (L+R)
#303357
CNC-machined rear upright made from highest-quality duraluminum features an integrated 2° outboard toe-in. Use the outboard toe-in will increase the corner speed. Complete set of left and right blocks. Includes composite bushings for ball-bearings.
|
 |
|
Alu Upright Rear 1° Outboard Toe-In (L+R)
#303358
CNC-machined rear upright made from premium lightweight T6 aluminum. Ultra-strong rear upright provides very long life and durability in even the most extreme racing conditions, features an integrated 1° outboard toe-in. Use of outboard toe-in will increase the corner speed. Complete set of left and right blocks.
|
 |
|
Alu Upright Rear 2° Outboard Toe-In (L+R)
#303359
CNC-machined rear upright made from premium lightweight T6 aluminum. Ultra-strong rear upright provides very long life and durability in even the most extreme racing conditions, features an integrated 2° outboard toe-in. Use of outboard toe-in will increase the corner speed. Complete set of left and right blocks.
|
 |
|
Composite Upright 0° Outboard Toe-In - Graphite
#303360
Molded rear upright made from specially-formulated graphite composite material features built-in 0° outboard toe to improve traction and prevent suspension geometry changes in serious crashes.
|
 |
|
Composite Upright 1° Outboard Toe-In - Left - Medium
#303361
Molded-composite left rear upright features built-in 1° of outboard toe-in to improve the rotation of the car in corners and prevent suspension geometry changes in serious crashes. Medium rigidity (labeled “M’ť) specially optimized for rubber-tire racing. Use with matching right-side rear upright 303351. Can be also used for foam tires.
|
 |
|
Composite Upright 0° Outboard Toe - Medium - 1-Hole
#303362
Molded-composite rear upright features built-in 0° of outboard toe to improve traction and prevent suspension geometry changes in serious crashes. This 1-hole upright may be used on high-traction tracks or tracks with long sweepers, since the position of the center hole will allow faster driving through those corners because of better cornering speed.
|
 |
|
Composite Upright 1° Outboard Toe-In - Left - Hard
#303363
Molded-composite left rear upright features built-in 1° of outboard toe-in to improve the rotation of the car in corners and prevent suspension geometry changes in serious crashes. Hard rigidity (labeled “H’ť) specially optimized for foam-tire racing. Use with matching right-side rear upright 303353. Can be also used for rubber tires.
|
 |
|
Composite Upright 0° Outboard Toe - Hard - 1-Hole
#303364
Molded-composite rear upright features built-in 0° of outboard toe to improve traction and prevent suspension geometry changes in serious crashes. This 1-hole upright may be used on high-traction tracks or tracks with long sweepers, since the position of the center hole will allow faster driving through those corners because of better cornering speed.
|
 |
|
Anti-Roll Bar Rear 2mm (Set)
#303400
If your car is understeering, then try this optional rear anti-roll bar. The rear anti-roll bar will decrease rear chassis roll and decrease rear traction. This will give your car more steering.
|
 |
|
Anti-Roll Bar Rear (Set)
#303401
If your XRAY T2, T3 is understeering, then try this optional rear anti-roll bar set. The rear anti-roll bar will decrease rear chassis roll and decrease rear traction, increasing your car’s steering. This complete rear anti-roll bar set for the XRAY T2, T3 includes all necessary hardware, and includes three different anti-roll bars: 1.2, 1.4, and 1.6mm.
|
 |
|
Composite Anti-Roll Bar Holders
#303411
Molded composite anti-roll bar holders, same as included in anti-roll bar sets #302401 (front) and #303401 (rear). Set of 8.
|
 |
|
Anti-Roll Bar Rear 2mm
#303420
Rear anti-roll bar (2.0mm thick) is included in the optional Rear Anti-Roll Bar Set, part number 302400. This is the STIFFEST rear anti-roll bar.
|
 |
|
Anti-roll Bar Rear 1mm
#303421
Optional rear anti-roll bar (1.0mm thick) has 2 ground surfaces. This provides stiffness adjustment possibilities of the rear anti-roll bar. This is the SOFTEST rear anti-roll bar.
|
 |
|
Anti-roll Bar Rear 1.5mm
#303422
Optional rear anti-roll bar (1.5mm thick) has 1 ground surface. This provides stiffness adjustment of the rear anti-roll bar. This is the MEDIUM rear anti-roll bar.
|
 |
|
Alu 4.9mm Ball End (2)
#303431
Alu 4.9mm ball ends, same as included in anti-roll bar sets #302401 (front) and #303401 (rear). Set of 2.
|
 |
|
Alu 4.9mm Ball End - Black (2)
#303431-K
Alu 4.9mm ball ends, same as included in anti-roll bar sets #302401 (front) and #303401 (rear). Set of 2. Black colour.
|
 |
|
Alu 4.9mm Ball End - Orange (2)
#303431-O
Alu 4.9mm ball ends, same as included in anti-roll bar sets #302401 (front) and #303401 (rear). Set of 2. Orange colour.
|
 |
|
Alu Anti-Roll Bar Collar (2)
#303440
Alu anti-roll bar collars remove play from the front anti-roll bar wire, increasing cornering speed and stability. Intended for serious racers who desire maximum performance from their car. Fits all T2 cars. Set of 2 collars and setscrews.
|
 |
|
Short Nylon Ball Joint 4.9mm (4+2)
#303450
Molded short 5mm ball joints, for connection to 5mm ball ends. Set of four ball joints and connectors. Used for the rear anti-roll bar mounting.
|
 |
|
Ball Joint 4.9mm - Open (4)
#303454
Molded composite 4.9mm ball joints for anti-roll bar links, same as included in anti-roll bar sets #302401 (front) and #303401 (rear). Set of 4.
|
 |
|
Anti-Roll Bar Rear 1.1mm
#303481
T2, T3 rear anti-roll bar, 1.1mm dia, black colour. Optional bar for #303401 Rear Anti-Roll Bar Set. Marked with 1 laser-engraved line for easy identification.
|
 |
|
Anti-Roll Bar Rear 1.2mm
#303482
T2, T3 rear anti-roll bar, 1.2mm dia, gold colour. Same bar as included in #303401 Rear Anti-Roll Bar Set.
|
 |
|
Anti-Roll Bar Rear 1.3mm
#303483
T2, T3 rear anti-roll bar, 1.3mm dia, black colour. Optional bar for #303401 Rear Anti-Roll Bar Set. Marked with 3 laser-engraved lines for easy identification.
|
 |
|
Anti-Roll Bar Rear 1.4mm
#303484
T2, T3 rear anti-roll bar, 1.4mm dia, silver colour. Same bar as included in #303401 Rear Anti-Roll Bar Set.
|
 |
|
Anti-Roll Bar Rear 1.5mm
#303485
T2, T3 rear anti-roll bar, 1.5mm dia, black colour. Optional bar for #303401 Rear Anti-Roll Bar Set. Marked with 5 laser-engraved lines for easy identification.
|
 |
|
Anti-Roll Bar Rear 1.6mm
#303486
T2, T3 rear anti-roll bar, 1.6mm dia, black colour. Same bar as included in #303401 Rear Anti-Roll Bar Set.
|
 |
|
Alu Lower 2-Piece Suspension Holder (1)
#303710-O
Authentic XRAY alu rear lower suspension holder for the REAR of the front bulkhead of the T4’14. CNC-machined from premium Swiss 7075 T6 aluminum.
|
 |
|
Alu Rear Lower Suspension Holder - Front - RF
#303711-O
CNC-machined from premium Swiss 7075 T6 aluminum, the rear lower suspension holder fits at the FRONT of the rear bulkhead of the T4’14. Optional 1-piece allows increased rotation of the car in high-traction track conditions.
|
 |
|
Brass Lower 2-Piece Suspension Holder for ARS - Right
#303714
Brass lower RIGHT suspension holder suitable for standard rear suspension, also suitable for ARS with extra roll center positions. Adds additional weight to the car to attain the minimum weight limit, and replaces other chassis-mounted weights which negatively influence chassis flex.
|
 |
|
Brass Lower 2-Piece Suspension Holder for ARS - Left
#303715
Brass lower LEFT suspension holder suitable for standard rear suspension, also suitable for ARS with extra roll center positions. Adds additional weight to the car to attain the minimum weight limit, and replaces other chassis-mounted weights which negatively influence chassis flex.
|
 |
|
Brass Rear Lower 1-Piece Suspension Holder - Rear - RR
#303721
Authentic XRAY brass rear lower suspension holder for the REAR of the rear bulkhead. Adds additional weight to the car to attain the minimum weight limit, and replaces other chassis-mounted weights which negatively influence chassis flex.
|
 |
|
T4'20 Alu Motor Mount
#303760
The motor and layshaft mounts are integrated into a one-piece design that is placed in the absolute center line of the chassis.
|
 |
|
T4F'20 Alu Motor Mount
#303761
The motor and layshaft mounts are integrated into a one-piece design that is placed in the absolute center line of the chassis.
|
 |
|
T4'20 Alu Chassis Brace - 7075 T6
#303762
Alu chassis brace is used to adjust the chassis flex. It is recommended for both alu and graphite chassis to fine tune the car flex for particular track conditions.
|
 |
|
T4'20 Brass Chassis Brace 15g
#303763
Brass chassis brace is used to adjust the chassis flex. The brass brace has the same features as the alu chassis brace but at the same time it works also as an additional weight as it is 15g heavier and is positioned in absolute center of the chassis.
|
 |
|
Ball Differential With Labyrinth Dust Covers™ - Set - 7075 T6
#305000
Complete ball-differential set uses new special Swiss 7075 T6 aluminum which is 30% stronger than previous material. Features heat-treated and hardcoated aluminum output shafts, screw for external adjustment, tough composite 34T diff pulley with Labyrinth Dust Covers™, high-performance ball-bearings, high-quality carbide axial thrustbearing, heavy-duty diff washers, and carbide diff balls. Factory pre-assembled.
|
 |
|
Ball Differential - Spring Steel - Set
#305001
XRAY is proud to present the smoothest, highest-quality differential in the RC industry! Manufactured exclusively for XRAY by HUDY, made from world-renowned top-secret Hudy Spring Steel, this high-performance differential set features an exclusive double slotted design, carbide diff balls, new axial ball-bearing with larger balls for smoother operation and ultra-high durability. Impossible to wear out!
|
 |
|
Ball Diff. with Labyrinth Covers™ - (Factory Kit)
#305002
Complete ball-differential set features hardcoated duraluminum output shafts, screw for external adjustment, both diff pulleys (2.125 and 1.77) with Labyrinth Dust Covers™, high-performance ball-bearings, carbide axial thrustbearing, heavy-duty diff washers, and carbide diff balls.
|
 |
|
Composite Ball Differential - Set
#305005
Complete composite ball differential set, included as standard in XRAY T2R. Made from high-strength composite material, this adjustable ball diff includes screw for external adjustment, diff pulley with special “side click-covers’ť, high-quality ball-bearings and carbide thrustbearing, special “D-lock’ť diff plates to prevent spinning and carbide balls for maximum life and performance. Does not come factory pre-assembled.
|
 |
|
T2R PRO Composite Ball Differential - Set
#305006
Complete composite ball differential set is a high-competition, super-smooth differential molded from strong, lightweight composite material for extra strength and long life. The ball differential features lightened 34T pulleys with special "side click-covers". Internal components include high-quality balls and shims for ultra-smooth operation and durability.
|
 |
|
Composite Diff Output Shafts T2R
#305016
Diff outdrives made from tough, lightweight molded composite fits Composite Ball Differential #305005. Molded-in flatspots key to D-ring diff plates to prevent plate slippage. Set of 2.
|
 |
|
Screw For External Diff Adjustment
#305040
Special screw for external diff adjustment. Manufactured exclusively by HUDY from world-renowned top-secret "Hudy Spring Steel".
|
 |
|
Diff Pulley 34T With Labyrinth Dust Covers
#305050
Precise nylon pulley (34T) and Labyrinth Dust Covers for ball-differential.
The pulley features XRAY invented and patented "Labyrinth Dust Covers", special anti-dust protective covers that are great for keeping dust and dirt out of the diff. Each pulley uses 12 diff balls.
|
 |
|
Diff Pulley 32T with Labyrinth Dust Covers™
#305051
Precision molded composite "low ratio" ball diff pulley (32T) and Labyrinth Dust Covers. The teeth number (32) is embossed into the side of the pulley for easy identification.
|
 |
|
Diff Pulley 34T with Labyrinth Dust Covers
#305054
Molded-composite 34T diff pulley with XRAY’s innovative yet very smart Labyrinth Dust Cover™ diff protection system which has been carried over from the previous T1/T2 platforms where it has been very successfully used for many years. For T2’008, T2'009, T3 US Foam-spec Edition ball differential.
|
 |
|
Diff Pulley 38T with Labyrinth Dust Covers
#305058
Molded-composite 38T diff pulley with XRAY’s innovative yet very smart Labyrinth Dust Cover™ diff protection system which has been carried over from the previous T1/T2 platforms where it has been very successfully used for many years. Set includes also front axle 38T side covers.
For T2’008. T2'009, T3 EU Rubber-spec Edition ball differential.
|
 |
|
Diff Washer 17x23x1 (2)
#305082
Two diff washers for ball-differentials. Each side of the washer has a distinct finish; a polished side against which the diff balls ride, and a rougher machined side that contacts the duraluminum diff output. Specially hardened to assure maximum life.
|
 |
|
D-lock Diff Washer - D 17x23x1 (2)
#305083
Special “D-lock’ť diff washers for composite ball differential prevents spinning or slippage of diff washers on composite outdrives. Set of 2.
|
 |
|
Carbide Ball 2.4mm for Ball-Differential (12)
#305091
To improve the action of the differential and speed up the break-in process, these carbide balls are the perfect solution. These carbide balls are much harder than the diff washers (over 15HRc more hardened) to ensure the surface of the diff ball will always stay round. Complete set of 12 balls.
|
 |
|
Super Front One-Way Differential 34T
#305100
Super Front One-Way Differential 34T for T1 · halves from lightweight alloy, strategically machined to reduce weight · double-slotted, hollowed adaptors from exclusive Hudy Spring Steel · 2 INA one-way bearings · high-quality, lightened pulley withspecial "side click-covers"
|
 |
|
One-Way Differential PRO - Set
#305101
Front One-Way Differential PRO for XRAY T1 or T1 EVO2. Front axle PRO machined from lightweight alloy, strategically machined for the lightest possible weight without compromising strength.
|
 |
|
XRAY Multi-Diff T1FK 05, T2, T2R, T2 007
#305102
New, innovation and new patent − the XRAY Multi-Diff™. This new unique front diff has three different settings: one-way / one-way solid / full-time solid axle.
|
 |
|
XRAY Multi-Diff T1, T1EVO2, T1R, T1M, T1FK
#305103
New, innovation and new patent − the XRAY Multi-Diff™. This new unique front diff has three different settings: one-way / one-way solid / full-time solid axle.
|
 |
|
XRAY Multi-Diff T2'008, T2'009, T3
#305104
The unique Multi-Diff™ caused a sensation in RC car racing when it was first introduced, and the updated version is no different. The Multi-Diff™ has 3 different settings.
|
 |
|
XRAY Multi-Differential T3 LiPo
#305105
The unique Multi-Diff™ caused a sensation in RC car racing when it was first introduced, and the updated version is no different. The Multi-Diff™ T3 LiPo has 3 different settings.
|
 |
|
Front Axle With One-Way Bearings
#305110
Front axle CNC-machined from lightweight aircraft duraluminum, strategically machined to reduce weight. The front axle includes two precision fit-pressed INA one-way bearings, specially ground for maximum precision.
|
 |
|
Front Axle PRO With One-Way Bearings
#305111
Front axle for 305101 One-Way Differential PRO. CNC machined from lightweight aircraft duraluminum, strategically machined
for the lightest possible weight without compromising strength. Includes two precision press-fit INA one-way bearings.
|
 |
|
Multi-Diff Main Axle T2'008, T2'009, T3
#305116
CNC-machined lightweight aluminum main axle includes factory-pressed (non-replaceable) high-quality German one-way bearings, hand-ground for maximum running precision and strength. Fits #305104 Multi-Diff™ for XRAY T2'008, T2'009, T3 only.
|
 |
|
Multi-Differential Main Axle T3 LiPo
#305117
CNC-machined lightweight aluminum main axle includes factory-pressed (non-replaceable) high-quality German one-way bearings, hand-ground for maximum running precision and strength.
|
 |
|
Multi-Diff Locking Axle - Spring Steel
#305121
Multi-Diff™ locking axle is CNC-machined from Hudy Spring Steel™. Fits both #305102 and #305103 Multi-Diffs™ for all XRAY T1 cars. Must only be used with #305131 Inner Driveshaft Adapters.
|
 |
|
Front Drive Adaptors Spring Steel (2)
#305130
Front drive adaptors for front one-way differential. Manufactured from world-renowned top-secret "Hudy Spring Steel". These adaptors feature exclusive double slotted design, that is possible only using Hudy Spring Steel material. Ultra light, extremely strong. Set of two.
|
 |
|
Inner Driveshaft Adapter - Spring Steel (2)
#305131
Precision-machined, specially-lightened outdrives for use with all XRAY T1 front one-way axles (including Multi-Diff™). The new lightweight one-way out drives manufactured from Hudy Spring Steel have a hex hole machined at each end.
|
 |
|
Inner Driveshaft Adapter 3.5mm - Spring Steel (2)
#305132
Precision-machined, specially-lightened outdrives for use with XRAY T2'008 Multi-Diff™ axle. Will fit only 3.5mm drive shaft replacement plastic caps (#305241). The new lightweight one-way outdrives have a hex hole machined at each end. Madefrom world-renowned HUDY Spring Steel™ for high strength and durability. Set of 2.
|
 |
|
Composite Solid Axle Driveshaft Adapters - V2 (2)
#305135
Molded-composite diff drive shaft adapters for #305184/305188 XRAY Composite Solid Axle. Modular design with composite output shafts allows for easy removal and super-easy servicing. Set of 2.
|
 |
|
Timing Belt Pulley 32T for Front One-way Diff.
#305151
Precision molded composite "low ratio" front pulley (32T) and side covers.
This front pulley may be used on the #305101 One-Way Differential or the #305180 Alu Solid Axle. The teeth number (32) is embossed into the side of the pulley for easy identification.
|
 |
|
Timing Belt Pulley 38T for Multi-Diff
#305158
Molded-composite 38T pulley and side covers for #305104 XRAY Multi-Diff™ for T2’008, T2'009, T3 EU Rubber-spec Edition. The teeth number (38) is embossed into the side of the pulley for easy identification.
|
 |
|
Alu Solid Axle Hard Coated - Set
#305180
New solid axle, CNC-machined from highest-quality lightweight aircraft duraluminum, hard coated for long life. Comes complete with pulley, covers, and hardware.
|
 |
|
Delrin® Solid Axle Complete Set
#305181
Delrin® Solid Axle Complete Set is for serious racers looking for an edge. XRAY's new ultra-true, high-durability solid front axle body is CNC machined from lightweight Delrin® composite material, making it 25% lighter than the original Multi-Diff. This solid axle complete set is a full-time solid axle only; all parts are included. Fits all XRAY touring cars.
Used by XRAY Factory Team - a "must have" for serious racers.
|
 |
|
Composite Solid Axle 34T - Set
#305184
Unique lightweight composite front solid axle 34T for XRAY T2’008, T2'009, T3 US Foam-spec Edition. The new composite solid axle has a very stiff structure and ultra-light weight that was achieved by injecting the entire solid axle from XRAY’s own self-designed & mixed lightweight composite material.
|
 |
|
Delrin® Solid Axle Body - Lightweight
#305186
For serious racers looking for an edge, XRAY's new ultra-true, high-durability solid front axle body is CNC machined from lightweight Delrin® composite material, making it 25% lighter than the original Multi-Diff. This solid axle transforms the XRAY Multi-Diff into a full-time solid axle only; remaining parts must be used from the Multi-Diff. Fits all XRAY touring cars.
Used by XRAY Factory Team - a "must have" for serious racers.
|
 |
|
Composite Solid Axle 38T - Set
#305188
Unique lightweight composite front solid axle 38T for XRAY T2’008, T2'009, T3 EU Rubber-spec Edition. The new composite solid axle has a very stiff structure and ultra-light weight that was achieved by injecting the entire solid axle from XRAY’s own self-designed & mixed lightweight composite material.
|
 |
|
Front Rebuildable Universal Drive Shaft - Set
#305200
Complete front universal rebuildable drive shaft. Set consists of wheel axle with integrated hex hub, front drive shaft made from spring steel, drive shaft coupling, plastic cap and pin.
|
 |
|
Wheel Axle Front With Hex Hub - Spring Steel (2)
#305215
The optional front wheel axles manufactured for XRAY by HUDY from the world-famous top-secret "Hudy Spring Steel(TM)". These are a direct replacement for the original duraluminum front wheelaxles from the pivot ball suspension, and will be virtually impossible to damage or wear out. The wheelaxles are strategically CNC-machined so they are as light as possible to reduce rotating mass, while maintaining ultimate strength.
|
 |
|
Drive Shaft Front - Spring Steel (2)
#305220
Front drive shafts, CNC-machined from world-renowned top-secret "Hudy Spring Steel". These race quality drive shafts are the smallest in the world, exclusively manufactured by HUDY. Set of two.
|
 |
|
ECS Drive Shaft 50mm - HUDY Spring Steel™
#305225
CNC-machined 50mm ECS drive shaft made from world-renowned top-secret HUDY Spring Steel™. This race-quality drive shaft is a spare part for #305325 Equalized Corner Speed (ECS) Drive Shaft 50mm - Hudy Spring Steel™ (1), exclusively manufactured by HUDY.
|
 |
|
ECS Drive Shaft 52mm - HUDY Spring Steel™
#305227
CNC-machined 52mm ECS drive shaft made from world-renowned top-secret HUDY Spring Steel™. This race-quality drive shaft is a spare part for #305327 Equalized Corner Speed (ECS) Drive Shaft 52mm - Hudy Spring Steel™ (1), exclusively manufactured by HUDY.
|
 |
|
Drive Shaft Replacement Plastic Cap 3mm (4) - V2
#305240
Low friction drive pin clips for protection and cushioning of drive shaft pin in diff outdrives. Set of four.
V2 Update: Both the material and design have been improved to reduce wear of the differential outdrives.
|
 |
|
Drive Shaft Replacement Plastic Cap 3.5mm (4)
#305241
Low friction 3.5mm drive pin clips for protection and cushioning of drive shaft pin in diff outdrives. Set of 4. For use only with T2'008 XRAY alu ball-diffs or Multi-Diff™.
|
 |
|
Rebuildable Universal Drive Shaft - Set
#305300
Complete rear universal rebuildable drive shaft. Set consists of wheel axle with integrated hex hub, rear drive shaft made from spring steel, drive shaft coupling, plastic cap and pin.
|
 |
|
Wheel Axle-22mm-Integr. Hex Hub - (Factory Kit) (2)
#305311
CNC-machined hardcoated duraluminum rear wheel axles with hex hubs. Ultra-true, direct, wobble-free wheel mounting ensures “slop-free" wheel rotation. Wheel axles have been strategically lightened to reduce rotating mass without compromising strength.
|
 |
|
Wheel Axle − 22mm - Offset “-1mm’ť - Hard Coated (2)
#305312
CNC-machined hardcoated duraluminum rear wheel axles with hex hubs. Ultra-true, direct, wobble-free wheel mounting ensures “slop-free" wheel rotation. Wheel axles have been strategically lightened to reduce rotating mass without compromising strength.
The wheel axles feature a -1mm offset which means that they are 1mm shorter than standard wheel axles.
|
 |
|
Wheel Axle − 22mm - Offset “+1mm’ť - Hard Coated (2)
#305313
CNC-machined hardcoated duraluminum rear wheel axles with hex hubs. Ultra-true, direct, wobble-free wheel mounting ensures “slop-free" wheel rotation. Wheel axles have been strategically lightened to reduce rotating mass without compromising strength.
The wheel axles feature a +1mm offset which means that they are 1mm longer than standard wheel axles.
|
 |
|
Wheel Axle - 22 mm - Integr. Hex Hub - Spring Steel (2)
#305315
Optional wheel axles manufactured for XRAY by HUDY from the world-famous top-secret "Hudy Spring Steel(TM)". These are a direct replacement for the original duraluminum wheelaxles, and will be virtually impossible to damage or wear out. The wheelaxles are strategically CNC-machined so they are as light as possible to reduce rotating mass, while maintaining ultimate strength.
|
 |
|
Drive Shaft - 51 mm - Spring Steel (2)
#305320
Rear drive shafts, CNC-machined from world-renowned top-secret "Hudy Spring Steel". These race quality drive shafts are the smallest in the world, exclusively manufactured by HUDY. Set of two.
|
 |
|
Drive Shaft-51mm-Spring Steel - (Factory Kit) (2)
#305321
Rear drive shafts, CNC-machined from world-renowned top-secret "Hudy Spring Steel". These race quality drive shafts are the smallest in the world, exclusively manufactured by HUDY. Drive shaft diff end has been strategically lightened to reduce rotating mass without compromising strength.
|
 |
|
Drive Shaft 50mm - Hudy Spring Steel™
#305323
CNC-machined 50mm drive shaft for XRAY T2,T3 made from world-renowned top-secret HUDY Spring Steel™. This race-quality drive shaft is the smallest in the world, exclusively manufactured by HUDY.
|
 |
|
Drive Shaft 52mm - Hudy Spring Steel™
#305324
CNC-machined 52mm CVD drive shaft made from world-renowned top-secret HUDY Spring Steel™. This race-quality drive shaft is the smallest in the world, exclusively manufactured by HUDY. Drive shaft diff end has been strategically lightened to reduce rotating mass without compromising strength.
|
 |
|
Equalized Corner Speed (ECS) Drive Shaft 50mm - Hudy Spring Steel™ (1)
#305325
XRAY proudly presents the new ECS drive shaft 50mm, designed with high-level racing in mind. The ECS drive shafts were developed to decrease front wheel vibration when racing with a solid front axle, thus providing a much smoother and quieter ride and increasing steering.
|
 |
|
Equalized Corner Speed (ECS) Drive Shaft 52mm - Hudy Spring Steel™ (1)
#305327
XRAY proudly presents the new ECS drive shaft 52mm, designed with high-level racing in mind. The ECS drive shafts were developed to decrease front wheel vibration when racing with a solid front axle, thus providing a much smoother and quieter ride and increasing steering.
|
 |
|
Drive Shaft - 32 mm - Spring Steel (2)
#305329
CNC-machined drive shafts from world-renowned top-secret "Hudy Spring Steel". These race-quality drive shafts are the smallest in the world, exclusively manufactured by HUDY. Set of 2.
|
 |
|
Alu Wheel Hub (2)
#305350
CNC-machined clamping-style alu wheel hubs for XRAY T2, T3. Set of two.
|
 |
|
Alu Wheel Hub - Offset +1.5mm (2)
#305353
CNC-machined clamping-style alu wheel hub for T2, T3 features 1.5mm offset to give wider track-width. Set of 2 includes clamping screws.
|
 |
|
ECS Drive Shaft Pin 1.5 x 8.5 - V3 (2)
#305390
Polished chrome pin for ECS drive shaft, 1.5 x 8.5mm. Specially hand-ground for maximum precision. To help prevent of loosening of the setscrew from the ECS shaft, XRAY recommends using these new pins with flat spots. The flat spots allow the setscrew to better settle into the coupling. Set of 2.
|
 |
|
ECS Drive Shaft Pin 1.5 x 9 (2)
#305391
Polished chrome pin for ECS drive shaft, 1.5 x 9mm. Specially hand-ground for maximum precision. To help prevent of loosening of the setscrew from the ECS shaft, XRAY recommends using these new pins with flat spots. The flat spots allow the setscrew to better settle into the coupling. Set of 2.
|
 |
|
High-Performance Drive Belt Front 3x507mm
#305431
Ultra-Flex High-Performance Drive Belt
For top competition racing XRAY offers these specially modified high-performance drive belts. The belts are very thin and elastic as possible to create much more effective transmissions, save batteries and eliminate friction. The belt is specially modified - hand ground on a special machine so the belt is as thin as possible, but in such a way that it will still have long life.
"A must have item for serious racers."
|
 |
|
High-Performance Kevlar Drive Belt Front 3x423mm
#305439
Specially modified high-performance Kevlar-reinforced front drive belt. The belt is very thin and elastic as possible to create much more effective transmissions, save batteries and eliminate friction.
|
 |
|
High-Performance Kevlar Drive Belt Rear 4x180mm
#305441
Ultra-Flex High-Performance Drive Belt
For top competition racing XRAY offers these specially modified high-performance Kevlar reinforced drive belts. The belts are very thin and elastic as possible to create much more effective transmissions, save batteries and eliminate friction. The belt is specially modified - hand ground on a special machine so the belt is as thin as possible, but in such a way that it will still have long life.
"A must have item for serious racers."
|
 |
|
High-Performance Drive Belt Rear 3x180mm
#305442
Specially modified high-performance 3mm-wide drive belt is 1mm narrower than original 4mm belt (#305441) for increased transmission efficiency. This belt is very thin and elastic as possible for an extremely effective transmission that saves batteries and eliminates friction. The belt is specially modified - hand ground on a special machine so the belt is as thin as possible, but in such a way that it will still have long life.
To fully enjoy the benefits from these high-performance belts, be sure all the transmission's ball-bearings are absolutely clean and there is no undue drag or friction.
|
 |
|
Main Layshaft With Supporting Hardware
#305500
A complete central layshaft assembly. The layshaft is manufactured exclusively by HUDY from world-renowned top-secret "Hudy Spring Steel" with press-fit adapter. The hollow layshaft construction provides ultra low weight and low rotating mass. The adapter is precisely pressed directly onto the layshaft to give ultra-true spur gear rotation. The set includes also one-way pulley, fixed pulley and one-way adjustment nut.
|
 |
|
Solid Alu Central Layshaft Set
#305502
Solid central layshaft set for use when you do not use the one-way action of the original central layshaft, and is especially useful when using the front one-way differential.
|
 |
|
Alu Solid Layshaft T1FK 05 (Set)
#305503
Central layshaft set for XRAY T1FK’05 includes CNC-machined hollow, ultra lightweight alu layshaft, precision-molded 20T pulleys, and all mounting hardware.
|
 |
|
Layshaft Spring Steel With Integrated Spur Gear Adapter
#305510
Central layshaft with press-fit adapter. The layshaft is manufactured exclusively by HUDY from world-renowned top-secret "Hudy Spring Steel". The hollow layshaft construction provides ultra low weight and low rotating mass. The adapter is accurately pressed directly onto the layshaft to give ultra-true spur gear rotation.
|
 |
|
Layshaft Spring Steel Integr. Spur G. Adapter EVO2
#305511
Central layshaft with press-fit adapter. The layshaft is manufactured exclusively by HUDY from world-renowned top-secret "Hudy Spring Steel". The hollow layshaft construction provides ultra low weight and low rotating mass. The adapter is accurately pressed directly onto the layshaft to give ultra-true spur gear rotation.
|
 |
|
Solid Alu Central Layshaft
#305515
CNC-machined strategically-lightened Solid central layshaft for use when you do not use the one-way action of the original central layshaft, and is especially useful when using the front one-way differential.
|
 |
|
Alu Solid Layshaft
#305521
Alu middle layshaft for T2’008, T3 has been strategically CNC-machined to minimize rotating weight without compromising strength or integrity. The hollow layshaft is perfectly round with zero runout, eliminating drivetrain vibration and producing a positive balance. The perfectly flat spur gear mounting surface reduces gear wobble.
|
 |
|
Alu Solid Layshaft - Black
#305521-K
Alu middle layshaft for T2’009, T3 has been strategically CNC-machined to minimize rotating weight without compromising strength or integrity. Black colour.
|
 |
|
Alu Solid Layshaft - Orange
#305521-O
Alu middle layshaft for T2’009, T3 has been strategically CNC-machined to minimize rotating weight without compromising strength or integrity. The hollow layshaft is perfectly round with zero runout, eliminating drivetrain vibration and producing a positive balance. The perfectly flat spur gear mounting surface reduces gear wobble. Orange colour.
|
 |
|
T4F Alu Solid Layshaft - Black
#305522-K
Alu middle layshaft for T4F has been strategically CNC-machined to minimize rotating weight without compromising strength or integrity.
|
 |
|
Alu Solid Layshaft with Bearings
#305523
Aluminum layshaft is strategically CNC-machined to minimize rotating weight without compromising strength or integrity.
|
 |
|
Low Ratio Pulley Set (ratio 1.77)
#305550
New high-performance option set of low ratio pulleys. The set includes 32T front and rear differential pulleys and Labyrinth Dust Covers (TM), 32T pulley for front one-way, and 18T central layshaft pulleys.
|
 |
|
Fixed Pulley 16T
#305570
Molded 16T pulley that is fixed to the central layshaft.
|
 |
|
Fixed Pulley 18T (2)
#305571
Precision molded composite "low ratio" pulleys (18T) and side plate for use on solid central layshaft. Set of 2 pulleys and 1 side plate. The teeth number (18) is embossed into the side of each pulley for easy identification.
|
 |
|
T2 008 Fixed Pulley 16T (2)
#305576
Precision-molded 16T layshaft pulleys for XRAY T2’008, includes composite shim. Standard pulleys for XRAY T2’008 EU Rubber-spec Edition. Set of 2.
|
 |
|
Fixed Pulley 20T (2)
#305577
Precision-molded 20T layshaft pulleys for XRAY T2’008, T2'009 and T3 includes composite shims. Standard pulleys for XRAY T2’008, T2'009, T3 US Foam -spec Edition. Set of 2.
|
 |
|
One-way Pulley 16T
#305580
Molded 16T pulley with one-way bearing rides on central layshaft.
|
 |
|
One-Way Pulley With Grooved One-Way Bearing
#305582
New one-way bearing for the middle shaft. This bearing has grooves on its outer surface that will prevent any potential rotational slippage inside the nylon pulley.
|
 |
|
Alu Middle One-Way Pulley Set
#305590
High-quality middle one-way pulley set for XRAY T2 cars is a great option part especially for rubber tires on carpet tracks or asphalt tracks. Recommended by Team XRAY for all levels of drivers from beginners to pros. The middle one-way can be used in combination with a front one-way diff which will make the car easier to drive, smoother, and have increased steering.
|
 |
|
Pinion Gear Steel 20T/48
#305620
High-performance 20 tooth, 48 pitch pinion gear.
Manufactured from special steel, this high-performance pinion gear is made by XRAY.
|
 |
|
Pinion Gear Steel 21T/48
#305621
High-performance 21 tooth, 48 pitch pinion gear.
Manufactured from special steel, this high-performance pinion gear is made by XRAY.
|
 |
|
Pinion Gear Steel 22T/48
#305622
High-performance 22 tooth, 48 pitch pinion gear.
Manufactured from special steel, this high-performance pinion gear is made by XRAY.
|
 |
|
Pinion Gear Steel 23T/48
#305623
High-performance 23 tooth, 48 pitch pinion gear.
Manufactured from special steel, this high-performance pinion gear is made by XRAY.
|
 |
|
Pinion Gear Steel 24T/48
#305624
High-performance 24 tooth, 48 pitch pinion gear.
Manufactured from special steel, this high-performance pinion gear is made by XRAY.
|
 |
|
Pinion Gear Steel 25T/48
#305625
High-performance 25 tooth, 48 pitch pinion gear.
Manufactured from special steel, this high-performance pinion gear is made by XRAY.
|
 |
|
Pinion Gear Steel 26T/48
#305626
High-performance 26 tooth, 48 pitch pinion gear.
Manufactured from special steel, this high-performance pinion gear is made by XRAY.
|
 |
|
Pinion Gear Steel 27T/48
#305627
High-performance 27 tooth, 48 pitch pinion gear.
Manufactured from special steel, this high-performance pinion gear is made by XRAY.
|
 |
|
Pinion Gear Steel 28T/48
#305628
High-performance 28 tooth, 48 pitch pinion gear.
Manufactured from special steel, this high-performance pinion gear is made by XRAY.
| |