|
T2 Chassis 2.5mm Graphite - Rubber-Spec - Multi-Flex™
#301122
CNC-machined T2 chassis from premium grade 2.5mm graphite material. This chassis has been slightly updated and optimized for rubber-tire racing conditions. Multi-Flex™ slots have been slightly redesigned to provide improved flex characteristics.
|
 |
|
T2 Chassis 3.5mm Graphite - Extra-Thick - Foam-Spec
#301123
Ultra-rigid and stiff CNC-machined T2 chassis from premium grade, extra-thick and rigid 3.5mm graphite material. This chassis enables the car to achieve an ultra-stiff torsion and flex setting required for high-competition foam racing.
|
 |
|
Alu Upper Deck Brace (2)
#301176
CNC-machined lightweight alu braces for altering the stiffness of the upper decks of both the XRAY T2 (uses 2 braces) and T1FK'05 (uses 3 braces). Placed in strategic positions on the top decks, these braces alter upper deck stiffness to fine-tune the car to the track. Set of 2.
|
 |
|
T4 Foam Bumper - Hard
#301226
High-quality hard front foam bumper, hand-cut from specially-developed extra hard foam material. Very light, yet very strong. Protects front of car in serious collisions.
|
 |
|
T4 Foam Bumper Wide - Hard
#301228
High-quality hard front foam bumper, hand-cut from specially-developed extra hard foam material. Protects front of car in serious collisions. Same dimensions as #301227 foam bumper.
|
 |
|
Front Body Mount Set +1mm Height
#301323
XRAY presents +1mm height-adjustable body posts for the T2 and NT1. For serious racers who focus on the small details, body height plays a very important role in the performance of the car and as such, ultra-fine body height tuning was developed by XRAY R&D engineers to address this increasingly important tuning set-up feature.
|
 |
|
Front Body Mount Set +2mm Height
#301324
XRAY presents +2mm height-adjustable body posts for the T2 and NT1. For serious racers who focus on the small details, body height plays a very important role in the performance of the car and as such, ultra-fine body height tuning was developed by XRAY R&D engineers to address this increasingly important tuning set-up feature.
|
 |
|
Rear Body Mount Set +1mm Height
#301333
XRAY presents +1mm height-adjustable body posts for the T2 and NT1. For serious racers who focus on the small details, body height plays a very important role in the performance of the car and as such, ultra-fine body height tuning was developed by XRAY R&D engineers to address this increasingly important tuning set-up feature.
|
 |
|
Rear Body Mount Set +2mm Height
#301334
XRAY presents +2mm height-adjustable body posts for the T2 and NT1. For serious racers who focus on the small details, body height plays a very important role in the performance of the car and as such, ultra-fine body height tuning was developed by XRAY R&D engineers to address this increasingly important tuning set-up feature.
|
 |
|
Alu Adjustable Body Post Stop (2)
#301351-O
Very handy, easily externally adjustable body posts from Swiss 7075 T6 aluminum. Allows for adjustment of body height by 3mm without needing to change the position on the body post.
|
 |
|
T2 Shock Tower Front 3.0mm Graphite
#302098
CNC-machined 3mm graphite front shock tower for XRAY T2 features optimized shock mounting positions and new Quick Roll Center™ positions. This all-in-one front shock tower has been optimized for use with either rubber or foam tires.
|
 |
|
Front Suspension Arm - Extra-Hard
#302162
Extra-hard molded composite front lower suspension arm. Recommended for use in high-grip conditions or with foam tires. Marked with “XH’ť for easy identification. May be used on either left or right side.
|
 |
|
Front Susp. Arm - Hard - 1-Hole
#302163
Molded composite front lower suspension. Standard hard-composite mixture arms (labeled “H’ť). The specially-formulated composite material allows for a very light yet very durable suspension arm that can withstand the rigors of high-performance racing with rubber tires. Can be also used for foam tires. Fits XRAY T2, T3 cars.
|
 |
|
Front Susp. Arm - Extra-Hard - 1-Hole
#302164
Molded composite front lower suspension. Extra-hard composite mixture arms (labeled “XH’ť) for high-traction foam-tire racing. The specially-formulated composite material allows for a very light yet very durable suspension arm that can withstand the rigors of high-performance racing with foam tires. Can be also used for rubber tires. Fits XRAY T2, T3 cars.
|
 |
|
Comp. Front Susp. Arm 1-Hole - Graphite
#302167
Molded lightweight composite front lower suspension arm. The specially-formulated graphite composite material allows for a very light suspension arm that can withstand the rigors of high-performance racing.
|
 |
|
Composite Steering Block - Hard
#302253
Molded composite steering block of “hard’ť hardness (H) for foam-tire racing. The steering block features two Ackermann positions, and uses small but robust 5x10 ball-bearings to minimize unsprung weight. Can be also used for rubber tires. Fits XRAY T2, T3 cars.
|
 |
|
Alu Steering Block
#302256
Alu Steering Block for XRAY T2 is CNC-machined from premium lightweight T6 aluminum, polished for luxuriuous and stylish appearance. Ultra-strong construction provides very long life and durability in even the most extreme racing conditions.
|
 |
|
Ball-Bearing Composite Bushing (4)
#302295
Molded composite bushings for installing ball-bearings in alu steering blocks (302256) and alu rear uprights (303358 and 303359). Set of 4.
|
 |
|
Alu C-Hub Block - Caster 0° - Orange
#302334
CNC-machined highest-quality duraluminum C-hub for XRAY T4. Caster pre-set at 0 degrees. Engraved with "0" for easy identification. Fits left or right sides. Includes two nylon bushings.
|
 |
|
Alu C-Hub Front Block Right - Caster 4° - Orange
#302337
CNC-machined highest-quality duaraluminum C-hub for right steering block of T2, T3. Caster pre-set at 4°. Engraved with "R4" to easy identification. Includes two nylon bushings. Use with left-side alu 4° C-hub #302338.
|
 |
|
Alu C-Hub Front Block Left - Caster 4° - Orange
#302338
CNC-machined highest-quality duaraluminum C-hub for left steering block of T2, T3. Caster pre-set at 4°. Engraved with "L4" to easy identification. Includes two nylon bushings. Use with right-side alu 4° C-hub #302337.
|
 |
|
Alu C-Hub Front Block Right - Caster 6° - Orange
#302339
CNC-machined highest-quality duaraluminum C-hub for right steering block of T2, T3. Caster pre-set at 6°. Engraved with "R6" to easy identification. Includes two nylon bushings. Use with left-side alu 6° C-hub #302340.
|
 |
|
Alu C-Hub Front Block Left - Caster 6° - Orange
#302340
CNC-machined highest-quality duaraluminum C-hub for left steering block of T2, T3. Caster pre-set at 6°. Engraved with "L6" to easy identification. Includes two nylon bushings. Use with right-side alu 6° C-hub #302339.
|
 |
|
Composite C-Hub Right - 2° Deg. - Medium (ECS)
#302361
Molded composite C-hub for right steering block of T2, T3. Caster pre-set at 2°. Medium rigidity for rubber-tire racing. Use with matching left-side C-hub #302362. Can be also used for foam tires.
|
 |
|
Composite C-Hub Left - 2° Deg. - Medium (ECS)
#302362
Molded composite C-hub for left steering block of T2, T3. Caster pre-set at 2°. Medium rigidity for rubber-tire racing. Use with matching right-side C-hub #302361. Can be also used for foam tires.
|
 |
|
Composite C-Hub Right - 4° Deg. - Medium
#302363
Molded composite C-hub for right steering block of T2, T3. Caster pre-set at 4°. Medium rigidity for rubber-tire racing. Use with matching left-side C-hub #302364. Can be also used for foam tires.
|
 |
|
Composite C-Hub Left - 4° Deg. - Medium
#302364
Molded composite C-hub for left steering block of T2, T3. Caster pre-set at 4°. Medium rigidity for rubber-tire racing. Use with matching right-side C-hub #302363. Can be also used for foam tires.
|
 |
|
Composite C-Hub Right - 6° Deg. - Medium (ECS)
#302365
Molded composite C-hub for right steering block of T2, T3. Caster pre-set at 6°. Medium rigidity for rubber-tire racing. Use with matching left-side C-hub #302366. Can be also used for foam tires.
|
 |
|
Composite C-Hub Left - 6° Deg. - Medium (ECS)
#302366
Molded composite C-hub for left steering block of T2, T3. Caster pre-set at 6°. Medium rigidity for rubber-tire racing. Use with matching right-side C-hub #302365. Can be also used for foam tires.
|
 |
|
Composite C-Hub Right - 0° Deg. - Hard (ECS)
#302369
Molded composite C-hub for right steering block. Caster pre-set at 0°. HARD rigidity for rubber-tire racing and also foam tire racing. Use with matching left-side C-hub #302370.
|
 |
|
Composite C-Hub Left - 0° Deg. - Hard (ECS)
#302370
Molded composite C-hub for left steering block. Caster pre-set at 0°. HARD rigidity for rubber-tire racing and also foam tire racing. Use with matching right-side C-hub #302369.
|
 |
|
Composite C-Hub Right - 2° Deg. - Hard (ECS)
#302371
Molded composite C-hub for right steering block of T2, T3. Caster pre-set at 2°. Hard rigidity for foam-tire racing. Use with matching left-side C-hub #302372. Can be also used for rubber tires.
|
 |
|
Composite C-Hub Left - 2° Deg. - Hard (ECS)
#302372
Molded composite C-hub for left steering block of T2, T3. Caster pre-set at 2°. Hard rigidity for foam-tire racing. Use with matching right-side C-hub #302371. Can be also used for rubber tires.
|
 |
|
Composite C-Hub Right - 4° Deg. - Hard (ECS)
#302373
Molded composite C-hub for right steering block of T2, T3. Caster pre-set at 4°. Hard rigidity for foam-tire racing. Use with matching left-side C-hub #302374. Can be also used for rubber tires.
|
 |
|
Composite C-Hub Left - 4° Deg. - Hard (ECS)
#302374
Molded composite C-hub for left steering block of T2, T3. Caster pre-set at 4°. Hard rigidity for foam-tire racing. Use with matching right-side C-hub #302373. Can be also used for rubber tires.
|
 |
|
Composite C-Hub Right - 6° Deg. - Hard
#302375
Molded composite C-hub for right steering block of T2, T3. Caster pre-set at 6°. Hard rigidity for foam-tire racing. Use with matching left-side C-hub #302376. Can be also used for rubber tires.
|
 |
|
Composite C-Hub Left - 6° Deg. - Hard
#302376
Molded composite C-hub for left steering block of T2, T3. Caster pre-set at 6°. Hard rigidity for foam-tire racing. Use with matching right-side C-hub #302375. Can be also used for rubber tires.
|
 |
|
Anti-Roll Bar Front (Set)
#302401
If your XRAY T2, T3 is oversteering, then try this optional front anti-roll bar set. The front anti-roll bar will decrease front chassis roll and decrease front traction, reducing your car’s steering. This complete front anti-roll bar set for the XRAY T2, T3 includes all necessary hardware, and includes three different anti-roll bars: 1.2, 1.4, and 1.6mm.
|
 |
|
Anti-Roll Bar Front 1.2mm
#302482
Front anti-roll bar, 1.2mm dia, gold colour. Same bar as included in #302401 Front Anti-Roll Bar Set.
|
 |
|
Anti-Roll Bar Front 1.3mm
#302483
Front anti-roll bar, 1.3mm dia, black colour. Optional bar for #302401 Front Anti-Roll Bar Set. Marked with 3 laser-engraved lines for easy identification.
|
 |
|
Anti-Roll Bar Front 1.4mm
#302484
Front anti-roll bar, 1.4mm dia, silver colour. Same bar as included in #302401 Front Anti-Roll Bar Set.
|
 |
|
Anti-Roll Bar Front 1.5mm
#302485
Front anti-roll bar, 1.5mm dia, black colour. Optional bar for #302401 Front Anti-Roll Bar Set. Marked with 5 laser-engraved lines for easy identification.
|
 |
|
Anti-Roll Bar Front 1.6mm
#302486
Front anti-roll bar, 1.6mm dia, black colour. Same bar as included in #302401 Front Anti-Roll Bar Set.
|
 |
|
Anti-Roll Bar Front 1.8mm
#302488
Front anti-roll bar, 1.8mm dia, black colour. Optional bar for #302401 Front Anti-Roll Bar Set. Marked with 8 laser-engraved lines for easy identification.
|
 |
|
Alu Adjustable Turnbuckle 39mm M3 L/R - Orange (2)
#302612-O
For serious racers who are conscious of weight savings, XRAY offers adjustable left & right M3 steering turnbuckles manufactured from strong, lightweight 7075 T6 aluminum. Lighter by 50%. Precision threading for fine toe adjustment. Length of 39mm. Orange color. Set of 2.
|
 |
|
Ball End 4.9mm With Thread 6mm (2)
#302653
Threaded 4.9mm ball end with 6mm thread for rear suspension on T2 family of cars to replace the ball + screw assembly. These balls are great for use with closed composite ball joints #302661 but also work with standard open ball joints. Set of 2.
|
 |
|
Ball End 4.9mm With Thread 8mm - V2 (2)
#302654
Threaded 4.9mm ball end with 8mm thread for front suspension on T2 family of cars to replace the ball + screw assembly. These balls are great for use with closed composite ball joints #302661 but also work with standard open ball joints. Set of 2.
|
 |
|
Ball End 4.9mm With Thread 10mm (2)
#302655
Threaded 4.9mm ball end with 10mm thread replaces ball+screw assembly on front suspension of the T2 & T3 family of cars. These ball ends are great for use with closed composite ball-joints #302661 but also work with standard open ball-joints. Set of 2.
|
 |
|
Composite Ball Joint 4.9mm - Closed (4)
#302661
Molded composite steering ball-joint for T2 family of cars and T3. Fits 4.9mm pivot ball or ball stud. Set of 4.
The closed ball joint prevents dust from getting onto the ball end, allowing the upper camber links to move more freely. The closed ball joints must be used with ball ends #302653 or #302654; these ball ends are available in two lengths for front and rear suspension, respectively.
|
 |
|
Alu Quick Roll-Center Holder™ 4.9mm − L1+L2 (2)
#303033
4.9mm alu quick roll-center holders allows you to make the upper linkage longer in either front or rear suspension of all T2, T3 cars. Includes a pair of roll centers marked L1 and L2.
|
 |
|
Alu Quick Roll-Center Holder™ 4.9mm H1 + H2
#303035
Matched pair of CNC-machined high-grade aluminum holders ’” marked H1 and H2 − 1mm higher with the same length than L1 + L2 (lower) holders, allowing car to roll more. May be used at either front or rear.
|
 |
|
Graphite Motor Guard
#303060
CNC-machined graphite motor guard for T1FK’05 and T2 protects the motor endbell from collisions. Includes mounting hardware.
|
 |
|
T2 Shock Tower Rear 3.0mm Graphite
#303094
CNC-machined 3mm graphite rear shock tower for XRAY T2 features optimized shock mounting positions and new Quick Roll Center™ positions. This all-in-one rear shock tower has been optimized for use with either rubber or foam tires.
|
 |
|
T2 Shock Tower Rear 3.5mm Graphite - Ultra Strong
#303095
This stronger rear shock tower for T2 & T2'007 is CNC-machined from premium extra thick 3.5mm graphite. This will minimize breakage and is a great valuable option part for any drivers who want to have a safe drive.
|
 |
|
Rear Suspension Arm - Extra-Hard
#303162
Extra-hard molded composite rear lower suspension arm. Recommended for use in high-grip conditions or with foam tires. Marked with “XH’ť for easy identification. May be used on either left or right side.
|
 |
|
Composite Rear Susp. Arm 1-Hole - Hard - V2
#303163
Molded composite rear lower suspension arm of standard hard-composite mixture (labeled “H’ť) for rubber-tire racing. The specially-formulated composite material allows for a very light yet very durable suspension arm that can withstand the rigors of high-performance racing with rubber tires. Can be also used for foam tires. Fits XRAY T2, T3 cars.
|
 |
|
Composite Rear Susp. Arm 1-Hole - Extra-Hard - V2
#303164
Molded composite rear lower suspension arm of extra-hard composite mixture (labeled “XH’ť) for foam-tire racing. The specially-formulated composite material allows for a very light yet very durable suspension arm that can withstand the rigors of high-performance racing with foam tires. Can be also used for rubber tires. Fits XRAY T2, T3 cars.
|
 |
|
Comp. Rear Susp. Arm 1-Hole - Graphite
#303167
Molded lightweight composite rear lower suspension arm. The specially-formulated graphite composite material allows for a very light yet suspension arm that can withstand the rigors of high-performance racing.
|
 |
|
Alu Adjustable Turnbuckle 26mm M3 L/R - Orange (2)
#303212-O
For serious racers who are conscious of weight savings, XRAY offers adjustable left & right M3 steering turnbuckles manufactured from strong, lightweight 7075 T6 aluminum. Lighter by 50%. Precision threading for fine toe adjustment. Length of 26mm. Orange color. Set of 2.
|
 |
|
Composite Upright 0° Outboard Toe-In - Medium
#303352
Molded-composite rear upright features built-in 0° of outboard toe to improve traction and prevent suspension geometry changes in serious crashes. Medium rigidity (labeled “M’ť) specially optimized for rubber-tire racing. Use on both left and right sides of the car. Can be also used for foam tires.
|
 |
|
Composite Upright 1° Outboard Toe-In - Right - Hard
#303353
Molded-composite right rear upright features built-in 1° of outboard toe-in to improve the rotation of the car in corners and prevent suspension geometry changes in serious crashes. Hard rigidity (labeled “H’ť) specially optimized for foam-tire racing. Use with matching left-side rear upright 303363. Can be also used for rubber tires.
|
 |
|
Composite Upright 0° Outboard Toe-In - Hard
#303354
Molded-composite rear upright features built-in 0° of outboard toe to improve traction and prevent suspension geometry changes in serious crashes. Hard rigidity (labeled “H’ť) specially optimized for foam-tire racing. Use on both left and right sides of the car. Can be also used for rubber tires.
|
 |
|
Alu Upright Rear 1° Outboard Toe-In (L+R)
#303358
CNC-machined rear upright made from premium lightweight T6 aluminum. Ultra-strong rear upright provides very long life and durability in even the most extreme racing conditions, features an integrated 1° outboard toe-in. Use of outboard toe-in will increase the corner speed. Complete set of left and right blocks.
|
 |
|
Alu Upright Rear 2° Outboard Toe-In (L+R)
#303359
CNC-machined rear upright made from premium lightweight T6 aluminum. Ultra-strong rear upright provides very long life and durability in even the most extreme racing conditions, features an integrated 2° outboard toe-in. Use of outboard toe-in will increase the corner speed. Complete set of left and right blocks.
|
 |
|
Composite Upright 1° Outboard Toe-In - Left - Hard
#303363
Molded-composite left rear upright features built-in 1° of outboard toe-in to improve the rotation of the car in corners and prevent suspension geometry changes in serious crashes. Hard rigidity (labeled “H’ť) specially optimized for foam-tire racing. Use with matching right-side rear upright 303353. Can be also used for rubber tires.
|
 |
|
Anti-Roll Bar Rear (Set)
#303401
If your XRAY T2, T3 is understeering, then try this optional rear anti-roll bar set. The rear anti-roll bar will decrease rear chassis roll and decrease rear traction, increasing your car’s steering. This complete rear anti-roll bar set for the XRAY T2, T3 includes all necessary hardware, and includes three different anti-roll bars: 1.2, 1.4, and 1.6mm.
|
 |
|
Composite Anti-Roll Bar Holders
#303411
Molded composite anti-roll bar holders, same as included in anti-roll bar sets #302401 (front) and #303401 (rear). Set of 8.
|
 |
|
Alu 4.9mm Ball End (2)
#303431
Alu 4.9mm ball ends, same as included in anti-roll bar sets #302401 (front) and #303401 (rear). Set of 2.
|
 |
|
Alu Anti-Roll Bar Collar (2)
#303440
Alu anti-roll bar collars remove play from the front anti-roll bar wire, increasing cornering speed and stability. Intended for serious racers who desire maximum performance from their car. Fits all T2 cars. Set of 2 collars and setscrews.
|
 |
|
Ball Joint 4.9mm - Open (4)
#303454
Molded composite 4.9mm ball joints for anti-roll bar links, same as included in anti-roll bar sets #302401 (front) and #303401 (rear). Set of 4.
|
 |
|
Anti-Roll Bar Rear 1.1mm
#303481
T2, T3 rear anti-roll bar, 1.1mm dia, black colour. Optional bar for #303401 Rear Anti-Roll Bar Set. Marked with 1 laser-engraved line for easy identification.
|
 |
|
Anti-Roll Bar Rear 1.2mm
#303482
T2, T3 rear anti-roll bar, 1.2mm dia, gold colour. Same bar as included in #303401 Rear Anti-Roll Bar Set.
|
 |
|
Anti-Roll Bar Rear 1.3mm
#303483
T2, T3 rear anti-roll bar, 1.3mm dia, black colour. Optional bar for #303401 Rear Anti-Roll Bar Set. Marked with 3 laser-engraved lines for easy identification.
|
 |
|
Anti-Roll Bar Rear 1.4mm
#303484
T2, T3 rear anti-roll bar, 1.4mm dia, silver colour. Same bar as included in #303401 Rear Anti-Roll Bar Set.
|
 |
|
Anti-Roll Bar Rear 1.5mm
#303485
T2, T3 rear anti-roll bar, 1.5mm dia, black colour. Optional bar for #303401 Rear Anti-Roll Bar Set. Marked with 5 laser-engraved lines for easy identification.
|
 |
|
Anti-Roll Bar Rear 1.6mm
#303486
T2, T3 rear anti-roll bar, 1.6mm dia, black colour. Same bar as included in #303401 Rear Anti-Roll Bar Set.
|
 |
|
Ball Diff. with Labyrinth Covers™ - (Factory Kit)
#305002
Complete ball-differential set features hardcoated duraluminum output shafts, screw for external adjustment, both diff pulleys (2.125 and 1.77) with Labyrinth Dust Covers™, high-performance ball-bearings, carbide axial thrustbearing, heavy-duty diff washers, and carbide diff balls.
|
 |
|
XRAY Multi-Diff T1FK 05, T2, T2R, T2 007
#305102
New, innovation and new patent − the XRAY Multi-Diff™. This new unique front diff has three different settings: one-way / one-way solid / full-time solid axle.
|
 |
|
Delrin® Solid Axle Body - Lightweight
#305186
For serious racers looking for an edge, XRAY's new ultra-true, high-durability solid front axle body is CNC machined from lightweight Delrin® composite material, making it 25% lighter than the original Multi-Diff. This solid axle transforms the XRAY Multi-Diff into a full-time solid axle only; remaining parts must be used from the Multi-Diff. Fits all XRAY touring cars.
Used by XRAY Factory Team - a "must have" for serious racers.
|
 |
|
ECS Drive Shaft 50mm - HUDY Spring Steel™
#305225
CNC-machined 50mm ECS drive shaft made from world-renowned top-secret HUDY Spring Steel™. This race-quality drive shaft is a spare part for #305325 Equalized Corner Speed (ECS) Drive Shaft 50mm - Hudy Spring Steel™ (1), exclusively manufactured by HUDY.
|
 |
|
ECS Drive Shaft 52mm - HUDY Spring Steel™
#305227
CNC-machined 52mm ECS drive shaft made from world-renowned top-secret HUDY Spring Steel™. This race-quality drive shaft is a spare part for #305327 Equalized Corner Speed (ECS) Drive Shaft 52mm - Hudy Spring Steel™ (1), exclusively manufactured by HUDY.
|
 |
|
Drive Shaft 52mm - Hudy Spring Steel™
#305324
CNC-machined 52mm CVD drive shaft made from world-renowned top-secret HUDY Spring Steel™. This race-quality drive shaft is the smallest in the world, exclusively manufactured by HUDY. Drive shaft diff end has been strategically lightened to reduce rotating mass without compromising strength.
|
 |
|
Equalized Corner Speed (ECS) Drive Shaft 50mm - Hudy Spring Steel™ (1)
#305325
XRAY proudly presents the new ECS drive shaft 50mm, designed with high-level racing in mind. The ECS drive shafts were developed to decrease front wheel vibration when racing with a solid front axle, thus providing a much smoother and quieter ride and increasing steering.
|
 |
|
Equalized Corner Speed (ECS) Drive Shaft 52mm - Hudy Spring Steel™ (1)
#305327
XRAY proudly presents the new ECS drive shaft 52mm, designed with high-level racing in mind. The ECS drive shafts were developed to decrease front wheel vibration when racing with a solid front axle, thus providing a much smoother and quieter ride and increasing steering.
|
 |
|
Alu Wheel Hub (2)
#305350
CNC-machined clamping-style alu wheel hubs for XRAY T2, T3. Set of two.
|
 |
|
Alu Wheel Hub - Offset +1.5mm (2)
#305353
CNC-machined clamping-style alu wheel hub for T2, T3 features 1.5mm offset to give wider track-width. Set of 2 includes clamping screws.
|
 |
|
ECS Drive Shaft Pin 1.5 x 8.5 - V3 (2)
#305390
Polished chrome pin for ECS drive shaft, 1.5 x 8.5mm. Specially hand-ground for maximum precision. To help prevent of loosening of the setscrew from the ECS shaft, XRAY recommends using these new pins with flat spots. The flat spots allow the setscrew to better settle into the coupling. Set of 2.
|
 |
|
Alu Middle One-Way Pulley Set
#305590
High-quality middle one-way pulley set for XRAY T2 cars is a great option part especially for rubber tires on carpet tracks or asphalt tracks. Recommended by Team XRAY for all levels of drivers from beginners to pros. The middle one-way can be used in combination with a front one-way diff which will make the car easier to drive, smoother, and have increased steering.
|
 |
|
Offset Spur Gear 78T/48
#305778
XRAY precision molded offset spur gear 78 tooth, 48 pitch. This spur gear has been strategically lightened to reduce rotating mass.
|
 |
|
Offset Spur Gear 81T/48
#305781
XRAY precision molded offset spur gear 81 tooth, 48 pitch. This spur gear has been strategically lightened to reduce rotating mass.
|
 |
|
Spur Gear 87T/48
#305787
XRAY precision molded spur gear 87 tooth, 48 pitch. This spur gear has been strategically lightened to reduce rotating mass.
|
 |
|
Composite Offset Spur Gear 92T / 64
#305862
XRAY presents new additions to the range of precision-molded 64-pitch offset spur gears made from special hard composite material, strategically lightened to reduce rotating mass without compromising strength or durability.
|
 |
|
Composite Offset Spur Gear 96T / 64
#305866
XRAY presents new additions to the range of precision-molded 64-pitch offset spur gears made from special hard composite material, strategically lightened to reduce rotating mass without compromising strength or durability.
|
 |
|
Composite Offset Spur Gear 99T / 64
#305869
Addition to the range of precision-molded 64-pitch offset spur gears made from special hard composite material, strategically lightened to reduce rotating mass without compromising strength or durability.
|
 |
|
Composite Offset Spur Gear 100T / 64
#305870
XRAY presents new additions to the range of precision-molded 64-pitch offset spur gears made from special hard composite material, strategically lightened to reduce rotating mass without compromising strength or durability.
|
 |
|
Offset Spur Gear 104T/64
#305874
XRAY precision molded offset spur gear 104 tooth, 64 pitch. This spur gear has been strategically lightened to reduce rotating mass.
|
 |
|
Offset Spur Gear 106T/64
#305876
XRAY precision molded offset spur gear 106 tooth, 64 pitch. This spur gear has been strategically lightened to reduce rotating mass.
|
 |
|
Offset Spur Gear 108T/64
#305878
XRAY precision molded offset spur gear 108 tooth, 64 pitch. This spur gear has been strategically lightened to reduce rotating mass.
|
 |
|
Offset Spur Gear 110T/64
#305880
XRAY precision molded offset spur gear 110 tooth, 64 pitch. This spur gear has been strategically lightened to reduce rotating mass.
|
 |
|
Offset Spur Gear 112T/64
#305882
XRAY precision molded offset spur gear 112 tooth, 64 pitch. This spur gear has been strategically lightened to reduce rotating mass.
|
 |
|
Offset Spur Gear 114T/64
#305884
XRAY precision molded offset spur gear 114 tooth, 64 pitch. This spur gear has been strategically lightened to reduce rotating mass.
|
 |
|
Offset Spur Gear 116T/64
#305886
XRAY precision molded offset spur gear 116 tooth, 64 pitch. This spur gear has been strategically lightened to reduce rotating mass.
|
 |
|
Offset Spur Gear 118T/64
#305888
XRAY precision molded offset spur gear 118 tooth, 64 pitch. This spur gear has been strategically lightened to reduce rotating mass.
|
 |
|
Narrow Pinion Gear Alu Hard Coated 12T/48
#305912
Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear.
|
 |
|
Narrow Pinion Gear Alu Hard Coated 13T/48
#305913
Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear.
|
 |
|
Narrow Pinion Gear Alu Hard Coated 14T/48
#305914
Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear.
|
 |
|
Narrow Pinion Gear Alu Hard Coated 15T/48
#305915
Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear.
|
 |
|
Narrow Pinion Gear Alu Hard Coated 16T/48
#305916
Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear.
|
 |
|
Narrow Pinion Gear Alu Hard Coated 17T/48
#305917
Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear.
|
 |
|
Narrow Pinion Gear Alu Hard Coated 18T/48
#305918
Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear.
|
 |
|
Narrow Pinion Gear Alu Hard Coated 19T/48
#305919
Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear.
|
 |
|
Narrow Pinion Gear Alu Hard Coated 20T/48
#305920
Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear.
|
 |
|
Narrow Pinion Gear Alu Hard Coated 21T/48
#305921
Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear.
|
 |
|
Narrow Pinion Gear Alu Hard Coated 22T/48
#305922
Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear.
|
 |
|
Narrow Pinion Gear Alu Hard Coated 23T/48
#305923
Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear.
|
 |
|
Narrow Pinion Gear Alu Hard Coated 24T/48
#305924
Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear.
|
 |
|
Narrow Pinion Gear Alu Hard Coated 25T/48
#305925
Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear.
|
 |
|
Narrow Pinion Gear Alu Hard Coated 26T/48
#305926
Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear.
|
 |
|
Narrow Pinion Gear Alu Hard Coated 27T/48
#305927
Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear.
|
 |
|
Narrow Pinion Gear Alu Hard Coated 28T/48
#305928
Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear.
|
 |
|
Narrow Pinion Gear Alu Hard Coated 29T/48
#305929
Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear.
|
 |
|
Narrow Pinion Gear Alu Hard Coated 30T/48
#305930
Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear.
|
 |
|
Narrow Pinion Gear Alu Hard Coated 31T/48
#305931
Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear.
|
 |
|
Narrow Pinion Gear Alu Hard Coated 32T/48
#305932
Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear.
|
 |
|
Narrow Pinion Gear Alu Hard Coated 33T/48
#305933
Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear.
|
 |
|
Narrow Pinion Gear Alu Hard Coated 34T/48
#305934
Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear.
|
 |
|
Narrow Pinion Gear Alu Hard Coated 18T/64
#305968
Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear.
|
 |
|
Narrow Pinion Gear Alu Hard Coated 19T/64
#305969
Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear.
|
 |
|
Narrow Pinion Gear Alu Hard Coated 20T/64
#305970
Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear.
|
 |
|
Narrow Pinion Gear Alu Hard Coated 21T/64
#305971
Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear.
|
 |
|
Narrow Pinion Gear Alu Hard Coated 22T/64
#305972
Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear.
|
 |
|
Narrow Pinion Gear Alu Hard Coated 23T/64
#305973
Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear.
|
 |
|
Narrow Pinion Gear Alu Hard Coated 24T/64
#305974
Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear.
|
 |
|
Narrow Pinion Gear Alu Hard Coated 25T/64
#305975
Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear.
|
 |
|
Narrow Pinion Gear Alu Hard Coated 26T/64
#305976
Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear.
|
 |
|
Narrow Pinion Gear Alu Hard Coated 27T/64
#305977
Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear.
|
 |
|
Narrow Pinion Gear Alu Hard Coated 28T/64
#305978
Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear.
|
 |
|
Narrow Pinion Gear Alu Hard Coated 29T/64
#305979
Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear.
|
 |
|
Narrow Pinion Gear Alu Hard Coated 30T/64
#305980
Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear.
|
 |
|
Narrow Pinion Gear Alu Hard Coated 31T/64
#305981
Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear.
|
 |
|
Narrow Pinion Gear Alu Hard Coated 32T/64
#305982
Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear.
|
 |
|
Narrow Pinion Gear Alu Hard Coated 33T/64
#305983
Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear.
|
 |
|
Narrow Pinion Gear Alu Hard Coated 34T/64
#305984
Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear.
|
 |
|
Narrow Pinion Gear Alu Hard Coated 35T/64
#305985
Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear.
|
 |
|
Narrow Pinion Gear Alu Hard Coated 36T/64
#305986
Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear.
|
 |
|
Narrow Pinion Gear Alu Hard Coated 37T/64
#305987
Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear.
|
 |
|
Narrow Pinion Gear Alu Hard Coated 38T/64
#305988
Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear.
|
 |
|
Narrow Pinion Gear Alu Hard Coated 40T/64
#305990
These narrow pinions are manufactured by XRAY on a specially-modified precision gear machine which has ultra-precise tolerances and assures unparalleled concentricity. After machining, the edges of pinions are chamfered and then the pinions are run in. The pinions are then specially treated to give them an even hardcoating so they stay absolutely true for a long time.
|
 |
|
Alu Narrow Pinion Gear 41T / 64 - Hardcoated
#305991
These narrow pinions are manufactured by XRAY on a specially-modified precision gear machine which has ultra-precise tolerances and assures unparalleled concentricity. After machining, the edges of pinions are chamfered and then the pinions are run in. The pinions are then specially treated to give them an even hardcoating so they stay absolutely true for a long time.
|
 |
|
Narrow Pinion Gear Alu Hard Coated 42T/64
#305992
These narrow pinions are manufactured by XRAY on a specially-modified precision gear machine which has ultra-precise tolerances and assures unparalleled concentricity. After machining, the edges of pinions are chamfered and then the pinions are run in. The pinions are then specially treated to give them an even hardcoating so they stay absolutely true for a long time.
|
 |
|
Narrow Pinion Gear Alu Hard Coated 44T/64
#305994
These narrow pinions are manufactured by XRAY on a specially-modified precision gear machine which has ultra-precise tolerances and assures unparalleled concentricity. After machining, the edges of pinions are chamfered and then the pinions are run in. The pinions are then specially treated to give them an even hardcoating so they stay absolutely true for a long time.
|
 |
|
Narrow Pinion Gear Alu Hard Coated 46T/64
#305996
These narrow pinions are manufactured by XRAY on a specially-modified precision gear machine which has ultra-precise tolerances and assures unparalleled concentricity. After machining, the edges of pinions are chamfered and then the pinions are run in. The pinions are then specially treated to give them an even hardcoating so they stay absolutely true for a long time. v
|
 |
|
Narrow Pinion Gear Alu Hard Coated 48T/64
#305998
These narrow pinions are manufactured by XRAY on a specially-modified precision gear machine which has ultra-precise tolerances and assures unparalleled concentricity. After machining, the edges of pinions are chamfered and then the pinions are run in. The pinions are then specially treated to give them an even hardcoating so they stay absolutely true for a long time.
|
 |
|
Narrow Pinion Gear Alu Hard Coated 50T/64
#306000
These narrow pinions are manufactured by XRAY on a specially-modified precision gear machine which has ultra-precise tolerances and assures unparalleled concentricity. After machining, the edges of pinions are chamfered and then the pinions are run in. The pinions are then specially treated to give them an even hardcoating so they stay absolutely true for a long time.
|
 |
|
6-Cell Graphite Battery Strap w/ Alu Stands (Set)
#306163
Pre-assembled 6-cell graphite battery strap for XRAY T2, T3 features the XRAY smart battery holder system and new battery tweak-free mounting system. The alu capture wheel enables you to easily close and secure the battery strap without any clips.
|
 |
|
Graphite Battery Strap for LiPo/NiMH - Black - Set
#306163-K
Pre-assembled 6-cell graphite battery strap for XRAY T2, T3 features the XRAY smart battery holder system and new battery tweak-free mounting system. The alu capture wheel enables you to easily close and secure the battery strap without any clips. Black color.
|
 |
|
Composite Set of Servo Shims (4)
#306219
Set of composite shims for mounting servos to mounting posts. Includes: 3x6x1mm (qty 4), 3x6x2mm (qty 4), 3x6x3mm (qty 4).
|
 |
|
Alu Shock Spring Retaining Collar (4)
#308031
Aluminum CNC-machined shock collars that can be used on the XRAY shock absorbers to increase the durability. Stylish and lightweight collars are CNC-machined from premium Swiss 7075 T6 aluminum and are strategically lightened.
|
 |
|
Alu XRAY Shock Spring Retaining Collar - Orange (4)
#308031-O
Aluminum CNC-machined shock collars that can be used on the XRAY shock absorbers to increase the durability. Stylish and lightweight collars are CNC-machined from premium Swiss 7075 T6 aluminum and are strategically lightened. Set of four. Orange color.
|
 |
|
Composite Set of Shims for Alu Shocks (2)
#308073
Set of precision-molded composite shims in thicknesses of 2.4mm and 0.8mm. These shims are spare parts for #308305 XRAY Alu Shock Absorber-Set 4-Step and contain enough parts for 2 shocks.
|
 |
|
Shock Absorber Membranes - Low
#308081
Silicon-rubber compensation membranes for shock absorbers. All-new low-profile shock membranes allow for easier shock rebound adjustment.
|
 |
|
Shock Foam Insert - Low (4)
#308091
Foam inserts for XRAY shocks, go between shock upper mount and rubber membrane. All-new low-profile shock foam inserts allow for easier shock rebound adjustment.
|
 |
|
XRAY Alu Shock Absorber-Set 4-Step (2)
#308305
Premium XRAY aluminum shock absorbers are specially developed and designed to work with both the T2 (electric touring) and NT1 (nitro touring) platforms. These unique black hardcoated aluminum shocks are loaded with all of the features needed for today’s racing. Whether you need ultra-fine shocks for your lightweight electric touring car or ultra-reliable shocks for your nitro touring car, the new XRAY shocks have you covered.
|
 |
|
Alu XRAY Shock Body (2)
#308321
Machined hardcoated alu shock bodies for #308305 XRAY Alu Shock Absorber-Set 4-Step. Set of 2.
Each aluminum shock body is CNC-machined from exclusive Swiss 7075 T6 aluminum −ensuring maximum strength and rigidity − using the world's most precise German long-turn CNC machine.
|
 |
|
Composite Shock Parts - Rebound Hole - Short
#308332
One frame containing composite parts (except pistons) for two XRAY short shock absorbers. These new shock parts feature the upper shock cap with a hole which allows for faster, easier and more comfortable shocks rebound adjustment. Fits all XRAY electric and nitro touring shocks.
|
 |
|
Alu Shock Cap-Nut with Vent Hole (2)
#308352
Machined alu upper shock cap for XRAY Shock Absorber-Set 4-Step. Set of 2.
The upper aluminum cap features a small vent hole that makes shock assembly very predictable and easy, since excess shock oil will escape through this vent hole.
|
 |
|
XRAY Spring-Set C = 2.2 (2)
#308373
New ultimate-match shock springs (C = 2.2) for XRAY T2 shocks. Stylish black finish. Laser-engraved value (2.2) on top spring coil for easy identification. Set of 2.
|
 |
|
XRAY Spring-Set C = 2.4 (2)
#308374
New ultimate-match shock springs (C = 2.4) for XRAY T2 shocks. Stylish black finish. Laser-engraved value (2.4) on top spring coil for easy identification. Set of 2.
|
 |
|
XRAY Spring-Set C = 2.6 (2)
#308375
New ultimate-match shock springs (C = 2.6) for XRAY T2 shocks. Stylish black finish. Laser-engraved value (2.6) on top spring coil for easy identification. Set of 2.
|
 |
|
XRAY Spring-Set C = 2.8 (2)
#308376
New ultimate-match shock springs (C = 2.8) for XRAY T2 shocks. Stylish black finish. Laser-engraved value (2.8) on top spring coil for easy identification. Set of 2.
|
 |
|
XRAY Spring-Set C = 3.0 (2)
#308377
New ultimate-match shock springs (C = 3.0) for XRAY T2 shocks. Stylish black finish. Laser-engraved value (3.0) on top spring coil for easy identification. Set of 2.
|
 |
|
XRAY Spring-Set C = 3.2 (2)
#308378
New ultimate-match shock springs (C = 3.2) for XRAY T2 shocks. Stylish black finish. Laser-engraved value (3.2) on top spring coil for easy identification. Set of 2.
|
 |
|
XRAY Spring-Set C = 3.4 (2)
#308379
New ultimate-match shock springs (C = 3.4) for XRAY T2 shocks. Stylish black finish. Laser-engraved value (3.4) on top spring coil for easy identification. Set of 2.
|
 |
|
Additional XRAY Ultimate Racing Springs (20)
#308380
For even more fine tuning of suspension dampening, XRAY offers an additional set of ultra-fine tuning springs in addition to the basic set (#308390) of XRAY springs. The ultra-fine tuning springs have different damping and compression characteristics that fall between the range of the springs in the basic set.
|
 |
|
XRAY Spring-Set D=1.5 (15 LB) Blue-Green (4)
#308384
For even more fine tuning of suspension dampening, XRAY offers an additional ultra-fine tuning springs in addition to the basic XRAY springs. The ultra-fine tuning springs have different damping and compression characteristics that fall between the range of the basic springs. All 4 springs within the set have the same length and damping characteristics.
|
 |
|
XRAY Spring-Set D=1.6 (20 LB) Light-Blue (4)
#308385
For even more fine tuning of suspension dampening, XRAY offers an additional ultra-fine tuning springs in addition to the basic XRAY springs. The ultra-fine tuning springs have different damping and compression characteristics that fall between the range of the basic springs. All 4 springs within the set have the same length and damping characteristics.
|
 |
|
XRAY Spring-Set D=1.7 (25 LB) Dark-Blue (4)
#308386
For even more fine tuning of suspension dampening, XRAY offers an additional ultra-fine tuning springs in addition to the basic XRAY springs. The ultra-fine tuning springs have different damping and compression characteristics that fall between the range of the basic springs. All 4 springs within the set have the same length and damping characteristics.
|
 |
|
XRAY Spring-Set D=1.8 (30 LB) C=4.5 (4)
#308387
For even more fine tuning of suspension dampening, XRAY offers an additional ultra-fine tuning springs in addition to the basic XRAY springs. The ultra-fine tuning springs have different damping and compression characteristics that fall between the range of the basic springs. All 4 springs within the set have the same length and damping characteristics.
|
 |
|
XRAY Spring-Set D=1.9 (35 LB) Light-Red (4)
#308388
For even more fine tuning of suspension dampening, XRAY offers an additional ultra-fine tuning springs in addition to the basic XRAY springs. The ultra-fine tuning springs have different damping and compression characteristics that fall between the range of the basic springs. All 4 springs within the set have the same length and damping characteristics.
|
 |
|
XRAY Selected Ultimate Racing Springs (24)
#308390
Ultimate high-performance racing springs, which provide precision tuning for your XRAY model racing car! Developed from extensive testing and racing experience, these racing springs were designed and precision-crafted to have a unique spring characteristic. The XRAY spring sets were designed to give you an optimum range of choices to fine tune your car.
|
 |
|
XRAY Spring-Set D=1.4 (14 LB) Yellow - Super Soft (4)
#308393
Set of four coil-springs for XRAY shock absorbers. All 4 springs within the set have the same length and damping characteristics.
Colour: Yellow
Tension: Very Soft
NOT interchangeable with yellow springs for Serpent shocks - 308096 Spring-set D=1.6 Yellow (2+2)
|
 |
|
XRAY Spring-Set D=1.5 (17.5 LB) White - Soft (4)
#308394
Set of four coil-springs for XRAY shock absorbers. All 4 springs within the set have the same length and damping characteristics.
Colour: White
Tension: Soft
NOT interchangeable with yellow springs for Serpent shocks - 308095 Spring-set D=1.5 White (2+2)
|
 |
|
XRAY Spring-Set D=1.8 (33 LB) Purple - Medium-Hard (4)
#308397
Set of four coil-springs for XRAY shock absorbers. All 4 springs within the set have the same length and damping characteristics.
Colour: Purple
Tension: Medium-Hard
NOT interchangeable with purple springs for Serpent shocks - 308093 Spring-set D=1.3 Purple (2+2)
|
 |
|
Set of Ceramic Ball-Bearings (14)
#309002
Set of 14 high-performance ceramic ball-bearings for XRAY touring cars. Set of 5x10x4 bearings (10pcs) and 10x15x4 bearings (4pcs).
|
 |
|
Silicone Grease 00
#309500
Super differential silicone lube in a resealable syringe. This is the best Ball Differential lubricant combined with the easiest applicator on the market.
|
 |
|
One-Way Lube 25ML
#309580
Special lubricant for one-way bearings used in one-way differentials or on the main layshaft. Lubricant improves engaging speed and increases one-way bearing durability. A must for the serious racer. A drop will cure a slipping one-way immediately.
|
 |
|
Tires XXT-M for Asphalt (2)
#309617
Rubber tires specially developed for medium & high-grip asphalt. Fits most popular sizes of wheels and inserts. Set of 2.
|
 |
|
Body Stratus 2.0 + Accessories (Protoform)
#309720
Stratus (ver 2.0) body made from high-strength Lexan® fits 1:10th scale electric touring cars such as the XRAY T4. Includes window mask, add-on wing, and mounting hardware.
|
 |
|
Balancing Chassis Weights (Front - 2pcs.)
#309820
Precision chassis weights
A complete set of 2 chassis balancing weights and mounting hardware. Designed for XRAY T1 to be mount at the pre-drilled holes at the front of the chassis but fits any other race car as well. Made from brass.
|
 |
|
Balancing Chassis Weights (Rear - 6 pcs.)
#309830
Precision chassis weights
A complete set of 6 chassis balancing weights and mounting hardware. Designed for XRAY T1 to be mount at the pre-drilled holes at the rear of the chassis but fits any other race car as well. Made from brass.
|
 |
|
Precision Balancing Chassis Weights (4 pcs.)
#309840
A complete set of 4 chassis balancing weights (2x 5g + 2x 10g) and mounting hardware. Designed for XRAY electric & nitro touring car to be mounted at pre-drilled chassis holes; also fits other race cars as well. Made from steel and laser engraved with the weight value for easy identification.
|
 |
|
Balancing Chassis Weights (Center - 3 pcs)
#309850
Precision chassis weights
A complete set of 3 chassis balancing weights and mounting hardware. Designed for XRAY T1 to be mount at the pre-drilled holes at the center of the chassis but fits any other race car as well. Made from brass.
|
 |
|
Spring-Set C=3.6 - Soft-Medium Hard - Rear (2)
#338286
XRAY rear spring set for NT1. Different spring tensions to fine tune your car. Powder-coated for easy identification. Developed from extensive testing and racing experience, these racing shock springs were designed and precision-crafted to have a unique spring characteristic. Set of 2 springs.
|
 |
|
Spring-Set C=4.5 - Medium-Medium Hard - Rear (2)
#338287
XRAY rear spring set for NT1. Different spring tensions to fine tune your car. Powder-coated for easy identification. Developed from extensive testing and racing experience, these racing shock springs were designed and precision-crafted to have a unique spring characteristic. Set of 2 springs.
|
 |
|
XRAY Springs - Set D=1.9 (35 LB) Light Red - Hard - Rear (2)
#338288
XRAY rear spring set for NT1. Different spring tensions to fine tune your car. Powder-coated for easy identification. Developed from extensive testing and racing experience, these racing shock springs were designed and precision-crafted to have a unique spring characteristic. Set of 2 springs.
|
 |
|
XRAY Springs - Set C=4.0 - Medium - Rear (2)
#338296
XRAY rear spring set for NT1. Different spring tensions to fine tune your car. Powder-coated for easy identification. Developed from extensive testing and racing experience, these racing shock springs were designed and precision-crafted to have a unique spring characteristic. Set of 2 springs.
|
 |
|
XRAY Springs - Set C=5.0 - Medium-Hard - Rear (2)
#338297
XRAY rear spring set for NT1. Different spring tensions to fine tune your car. Powder-coated for easy identification. Developed from extensive testing and racing experience, these racing shock springs were designed and precision-crafted to have a unique spring characteristic. Set of 2 springs.
|
 |
|
Ceramic Ball 2.4mm (12)
#930220
Set of 12 premium-quality ceramic balls made from extra-hard Si3N4 silicone nitride ceramic. Significantly improves differential lifespan while reducing friction and vibration. Higher RPM capabilities.
|
 |
|
Ceramic Ball-Bearing Axial F3-8 3x8x3.5
#930238
High-precision axial thrustbearing 3x8x3.5mm for ball differential features ceramic balls. Highest-quality material and design guarantees the smoothest diff operation and increased life. Ceramic balls in the axial cage are made from extra-hard Si3N4 silicone nitride ceramic. Significantly improves differential lifespan while reducing friction and vibration. Higher RPM capabilities.
|
 |
|
Pin 1.5x8.8 (10)
#980159
Polished chrome pin. Dia. x length = 1.5mm x 8.8mm. Set of 10 pieces.
|
 |
ID |
Product Name |
Released |
305784-O |
|
May 27, 2019 |
305866-O |
|
May 27, 2019 |
305870-O |
|
May 27, 2019 |
305880-O |
|
May 27, 2019 |
301210 |
|
Jan. 29, 2019 |
301232 |
|
Dec. 13, 2018 |
303125-O |
|
Sep. 10, 2018 |
941014 |
|
Mar. 21, 2018 |
305869 |
|
Nov. 14, 2017 |
305221 |
|
Sep. 06, 2017 |
305334 |
|
Sep. 06, 2017 |
301228 |
|
Apr. 19, 2017 |
305772 |
|
Apr. 11, 2017 |
305776 |
|
Apr. 11, 2017 |
305779 |
|
Apr. 11, 2017 |
303126-K |
|
Mar. 24, 2017 |
303144-O |
|
Feb. 28, 2017 |
302335 |
|
Feb. 01, 2017 |
302336 |
|
Feb. 01, 2017 |
305860 |
|
Jan. 03, 2017 |
| |
 |
|