xrayxrayHome XRAY homeXRAY X-shopXRAY X-forumRCAmerica
supportsearchcontactguestbooksite map
newsproductsaboutusworldwide headlines
click to enable quick search
 
Composite Steering Block - Medium - V2
#302252

Molded composite steering block of “medium” hardness (M) for rubber-tire racing. The steering block features two Ackermann positions, and uses small but robust 5x10 ball-bearings to minimize unsprung weight. Can be also used for foam tires. Fits XRAY T2, T3 cars. 



Steel Steering Bushing (2+2)
#302291

Precision-machined bushing for front C-hub steering block pivot screws on XRAY T2, T3. Includes 4 pieces: 2 short + 2 long. 



Composite C-Hub Right - 4° Deg. - Medium
#302363

Molded composite C-hub for right steering block of T2, T3. Caster pre-set at 4°. Medium rigidity for rubber-tire racing. Use with matching left-side C-hub #302364. Can be also used for foam tires. 



Composite C-Hub Left - 4° Deg. - Medium
#302364

Molded composite C-hub for left steering block of T2, T3. Caster pre-set at 4°. Medium rigidity for rubber-tire racing. Use with matching right-side C-hub #302363. Can be also used for foam tires. 



Anti-Roll Bar Front 1.6mm
#302486

Front anti-roll bar, 1.6mm dia, black colour. Same bar as included in #302401 Front Anti-Roll Bar Set. 



Ball Joint 4.9mm - Open - V2 (8)
#302663

Molded composite 4.9mm ball joints, open on both sides, for connection to 4.9mm ball. Set of eight. Fits XRAY T2, T3. 



Ball Joint 4.9mm Unidirectional - Open (4)
#302664

Molded composite 4.9mm ball joints, special construction. For connection to 5mm ball. Set of four. Fits XRAY T2, T3. 



Alu Quick Roll-Center Holder™ 4.9mm - Orange (2)
#303032-O

QRC (Quick Roll Center™) holders pre-assembled with #302664 unidirectional ball joints. Orange colour. 



Alu Shim 3x6x1.0mm - Orange (10)
#303122-O

Alu shims 3x6mm size, 1mm thick. Orange color, set of 10. 



Alu Shim 3x6x2.0mm - Orange (10)
#303123-O

Alu shims 3x6mm size, 2mm thick. Orange color, set of 10. 



Rear Turnbuckle L/R 25mm - Spring Steel (2)
#303210

Set of two adjustable turnbuckle for adjusting camber of rear uprights, manufactured from world-renowned top-secret "Hudy Spring Steel". 



Composite Upright 0° Outboard Toe-In - Medium
#303352

Molded-composite rear upright features built-in 0° of outboard toe to improve traction and prevent suspension geometry changes in serious crashes. Medium rigidity (labeled “M”) specially optimized for rubber-tire racing. Use on both left and right sides of the car. Can be also used for foam tires. 



Composite Anti-Roll Bar Holders
#303411

Molded composite anti-roll bar holders, same as included in anti-roll bar sets #302401 (front) and #303401 (rear). Set of 8. 



Alu 4.9mm Ball End - Black (2)
#303431-K

Alu 4.9mm ball ends, same as included in anti-roll bar sets #302401 (front) and #303401 (rear). Set of 2. Black colour. 



Alu 4.9mm Ball End - Orange (2)
#303431-O

Alu 4.9mm ball ends, same as included in anti-roll bar sets #302401 (front) and #303401 (rear). Set of 2. Orange colour. 

Replaced by Alu 4.9mm Ball End - Black (2) 



Ball Joint 4.9mm - Open (4)
#303454

Molded composite 4.9mm ball joints for anti-roll bar links, same as included in anti-roll bar sets #302401 (front) and #303401 (rear). Set of 4. 



Anti-Roll Bar Rear 1.4mm
#303484

T2, T3 rear anti-roll bar, 1.4mm dia, silver colour. Same bar as included in #303401 Rear Anti-Roll Bar Set. 



Drive Shaft Coupling for Set Screw – Hudy Spring Steel™
#305231

Hudy Spring Steel™ drive shaft coupling for Set Screw for increased reliability, works in front and rear CVD drive shafts of XRAY T2, T3. Specially hand-ground for maximum precision.  



Drive Shaft Replacement Plastic Cap 3.5mm (4)
#305241

Low friction 3.5mm drive pin clips for protection and cushioning of drive shaft pin in diff outdrives. Set of 4. For use only with T2'008 XRAY alu ball-diffs or Multi-Diff™. 



Drive Shaft 52mm - Hudy Spring Steel™
#305324

CNC-machined 52mm CVD drive shaft made from world-renowned top-secret HUDY Spring Steel™. This race-quality drive shaft is the smallest in the world, exclusively manufactured by HUDY. Drive shaft diff end has been strategically lightened to reduce rotating mass without compromising strength.  



Alu Drive Shaft Swiss 7075 T6 - Hard Coated - 52mm
#305326

Super-lightweight 52mm alu drive shaft CNC-machined from premium Swiss 7075 T6 and hardcoated for extra durability and stylish looks. New design is up to 40% lighter than steel drive shaft. 



Drive Axle - Lightweight - Hudy Spring Steel™
#305341

Super-lightweight drive axle for XRAY T2, T3 CNC-machined from world-renowned, top-secret HUDY Spring Steel™. Reduces rotating weight by up to 35% over standard outdrive. 



Alu Wheel Hub - Black (2)
#305350-K

CNC-machined clamping-style alu wheel hubs for XRAY T2, T3. Set of two. Black colour. 



Front Arm Pivot Pin (2)
#307221

Front lower outer pivot pins for XRAY T2, T3. Hardened for very high durability and long life. Set of two. 



Rear Arm Pivot Pin (2)
#307321

Rear lower outer pivot pins for XRAY T2, T3. Hardened for very high durability and long life. Set of two. 



Pivot Ball 5.0mm Double Bevel Shoulders (10)
#307455

Specially-machined 5.0mm pivot ball with double bevel shoulders, for use with open 5.0mm ball joints on XRAY T2, T3. Set of 10. 



Ball End 4.9mm with 4mm Thread (2)
#362648

Threaded 4.9mm ball end with 4mm thread length for connection to molded ball joints. Set of 2. Direct replacement for #302652 steel balls. 



Hex Screw SB M3x2.5 (10)
#901302

M3x2.5 setscrew, hex drive. Set of 10. 



Hex Screw SB M3x3 (10)
#901303

M3x3 setscrew, hex drive. Set of 10 pieces. 



Hex Screw SB M3x4 (10)
#901304

M3x4 setscrew, hex drive. Set of 10 pieces. 



Hex Screw SB M3x8 (10)
#901308

M3x8 setscrew, hex drive. Set of 10 pieces. 



Hex Screw SH M2x5 (10)
#902205

M2x5 button-head machine screw, hex drive. Set of 10 pieces. 



Hex Screw SH M3x6 (10)
#902306

M3x6 button-head machine screw, hex drive. Set of 10 pieces. 



Hex Screw SH M3x10 (10)
#902310

M3x10 button-head machine screw, hex drive. Set of 10 pieces. 



Ball-Bearing 5x10x4 Rubber Sealed - Oil (2)
#940510

New high-speed ball-bearings manufactured specially for XRAY. ID x OD x thickness (mm) = 5x10x4. Set of 2 pieces. 



Pin 2x9.8 (10)
#980210

Polished chrome pin. Dia. x length = 2mm x 9.8mm. Set of 10 pieces. 



ID Product Name Released
362648 Ball End 4.9mm with 4mm Thread (2) Mar. 22, 2016
303032-O Alu Quick Roll-Center Holder™ 4.9mm - Orange (2) Oct. 31, 2008
303122-O Alu Shim 3x6x1.0mm - Orange (10) Oct. 31, 2008
303123-O Alu Shim 3x6x2.0mm - Orange (10) Oct. 31, 2008
303431-K Alu 4.9mm Ball End - Black (2) Oct. 31, 2008
303431-O Alu 4.9mm Ball End - Orange (2) Oct. 31, 2008
305350-K Alu Wheel Hub - Black (2) Oct. 31, 2008
305326 Alu Drive Shaft Swiss 7075 T6 - Hard Coated - 52mm Sep. 26, 2008
305341 Drive Axle - Lightweight - Hudy Spring Steel™ Sep. 23, 2008
980210 Pin 2x9.8 (10) Feb. 27, 2008
302363 Composite C-Hub Right - 4° Deg. - Medium Nov. 28, 2007
302364 Composite C-Hub Left - 4° Deg. - Medium Nov. 28, 2007
303352 Composite Upright 0° Outboard Toe-In - Medium Nov. 28, 2007
305241 Drive Shaft Replacement Plastic Cap 3.5mm (4) Nov. 28, 2007
305324 Drive Shaft 52mm - Hudy Spring Steel™ Nov. 28, 2007
302486 Anti-Roll Bar Front 1.6mm Feb. 01, 2006
303411 Composite Anti-Roll Bar Holders Feb. 01, 2006
303454 Ball Joint 4.9mm - Open (4) Feb. 01, 2006
303484 Anti-Roll Bar Rear 1.4mm Feb. 01, 2006
302252 Composite Steering Block - Medium - V2 Jan. 31, 2006