xrayxrayHome XRAY homeXRAY X-shopXRAY X-forumRCAmerica
supportsearchcontactguestbooksite map
newsproductsaboutusworldwide headlines
click to enable quick search
 
Alu Shim 3x6x1.0mm (10)
#303122

Alu shims 3x6mm size, 1mm thick. Silver color, set of 10. 



Alu Shim 3x6x2.0mm (10)
#303123

Alu shims 3x6mm size, 2mm thick. Silver color, set of 10. 



Pivot Ball 5.8mm with Hex (4)
#303241

Ball 5.8mm with hex cavity, for connection to molded composite ball joints. Set of four. 



Chassis 3mm - CNC Machined - Swiss 7075 T6 - V2
#331100

CNC-machined 3mm Swiss 7075 T6 alu chassis plate for NT1. Beveled lower outer edges, countersunk screw holes on bottom surface. 

Replaced by Alu Chassis with Weight Integr. - Swiss 7075 T6 (3mm) 



Composite Adjust. Ball-Bearing Hub (4)
#332070

Molded composite adjustable ball-bearing hub. Set of 4.  



Composite Susp. Eccentric Bushing (4)
#332315

Molded composite eccentric suspension pin inserts with 2 different offset positions. Set of 4 insert frames allows pins to have entire range of adjustment (+1.5, +0.5, -0.5, -1.5mm). 



Adj. Turnbuckle L/R 22mm - Hudy Spring Steel™ (2)
#332630

CNC-machined adjustable turnbuckles, 22mm length, made from tough HUDY Spring Steel™. Set of 2. 



Composite Lower & Upper Bulkhead Rear Right
#333010

Molded composite lower and upper rear right bulkhead set. 



Composite Lower & Upper Bulkhead Rear Left
#333020

Molded composite lower and upper rear left bulkhead set. 



Composite Rear Bulkhead Cover
#333050

Molded composite rear bulkhead cover. 



Graphite Roll-Center Bridge - V2
#333060

CNC-machined rear roll center bridge made from thick, top-grade graphite. Includes multiple roll center mounting positions. 



FRP Shock Tower Rear 3mm - V2
#333080

CNC-machined rear shock tower made from top-grade 3.0mm thick FRP material. Includes multiple shock upper mounting positions. 



Composite Suspension Arm Rear Lower - V2
#333110

Molded composite suspension arm, rear lower. Used on either left or right side. 



Composite Rear Upper Camber Link Ball Joint 5.8mm (4)
#333130

Molded composite 5.8mm ball joints for rear upper camber link. Set of 4. 



Pivot Ball 5.8mm with Hex (4)
#333240

Steel 5.8mm pivot balls with double shoulders and 4mm hex slot in one end. Set of 4. 



Composite Upright Rear - V2
#333310

Molded composite rear upright with 2 roll center positions, used on left or right side. 



Anti-Roll Bar Rear 2.0mm
#333420

Rear anti-roll bar wire, 2.0mm for adjusting rear anti-roll bar stiffness. 



Anti-Roll Bar Pivot ball 5.8mm (2)
#333450

CNC-machined steel ball joint for rear anti-roll bar. Set of 2. 



Composite Anti-Roll Bar Ball Joint 5.8mm (4)
#333460

Molded composite 5.8mm ball joints for rear anti-roll bar linkages. Set of 4. 



Brake Cam Post - Alu 7075 T6
#334040

CNC-machined brake cam post made from tough 7075 T6 alu. 



Composite Brake Upper Plate + Composite Clamps
#334050

Molded composite rear bulkhead brake cross plate + anti-roll bar clamps. 



Ventilated Brake Disk - Laser Cut - Precision-Ground
#334110

Laser-cut, heat-treated, precision-ground ventilated brake disk for NT1 ensures vibration-free operation. 

Replaced by Ventilated Brake Disc - Laser Cut - Precision-Ground 



Hardened Steel Brake Pad - Laser Cut (2)
#334120

High-precision, ultra-efficient steel brake pads for NT1 are laser cut and precision ground on both sides for an ultra-smooth surface finish to guarantee maximum braking efficiency. Set of 2. 



Brake Pad Ferodo® (2)
#334130

Ferodo® fiber brake pads for NT1, must be glued onto #334120 steel brake pads. Set of 2. 



Brake Disk Adapter - Alu 7075 T6
#334140

CNC-machined brake disk adapter made from tough 7076 T6 alu. Includes factory-pressed pins (non-replaceable). 

Replaced by Alu Brake Disk Adapter - Swiss 7075 T6 - Orange 



Composite Wheel Hub (2)
#335255

Strong composite wheel hubs. Set of 2. 



CVD Rear Drive Shaft Set - Hudy Spring Steel™ (1)
#335305

This super-efficient and performance-enhancing rear CVD (constant velocity drives) set for the NT1 replaces the standard rear drive shaft and drive axle. Rebuildable with separately-available spare parts. Used for REAR only. Contains parts for ONE complete rear CVD only. 



Pur® Reinforced Drive Belt Rear 5.5x177mm - V2
#335450

PUR® reinforced rear drive belt. 5.5 x 177mm. This belt is very thin and elastic as possible for an extremely efficient, low-friction drivetrain. 



2-Speed Shaft
#335510

2-speed layshaft is precision ground, heat-treated and polished for smooth operation, extra strength, and long life. 



Composite Belt Pulley 20T - 2-Speed-Center
#335810

Molded composite 20T belt pulley on main layshaft, drives rear belt. 



Steel Pivot Ball 8.4mm (2)
#337250

Steel 8.4mm pivot balls hardened and ultra-precisely hand ground for very high durability and long life. Set of 2.  



Alu Adjusting Nut M10x1 (4)
#337252

Alu M10 adjusting nut for capturing pivot balls in front steering blocks and rear uprights. Set of 4. 



Composite Ball Cup 8.4mm (8)
#337254

Molded composite ball cups for cushioning alu M10 alu adjusting nuts against 8.4mm pivot balls. Set of 8. 



Rear Lower Inner Pivot Pin (2)
#337310

Rear lower inner pivot pins for NT1. Hardened for very high durability and long life. Set of 2. 



Hex Screw SB M3x3 (10)
#901303

M3x3 setscrew, hex drive. Set of 10 pieces. 



Hex Screw SB M3x5 (10)
#901305

M3x5 setscrew, hex drive. Set of 10 pieces. 



Hex Screw SB M3x8 (10)
#901308

M3x8 setscrew, hex drive. Set of 10 pieces. 



Hex Screw SB M3x12 (10)
#901312

M3x12 setscrew, hex drive. Set of 10 pieces. 



Hex Screw SB M3x16 (10)
#901316

M3x16 setscrew, hex drive. Set of 10 pieces.
 



Hex Screw SB M4x6 (10)
#901406

M4x6 setscrew, hex drive. Set of 10 pieces.  



Hex Screw SH M3x6 (10)
#902306

M3x6 button-head machine screw, hex drive. Set of 10 pieces. 



Hex Screw SH M3x8 (10)
#902308

M3x8 button-head machine screw, hex drive. Set of 10 pieces. 



Hex Screw SH M3x12 (10)
#902312

M3x12 button-head machine screw, hex drive. Set of 10 pieces. 



Hex Screw SFH M3x8 (10)
#903308

M3x8 flat-head machine screw, hex drive. Set of 10 pieces.
 



Hex Screw SFH M3x10 (10)
#903310

M3x10 flat-head machine screw, hex drive. Set of 10 pieces.
 



Ball-Bearing 5x8x2.5 Rubber Sealed - Oil (2)
#940508

New high-speed ball-bearings manufactured specially for XRAY. ID x OD x thickness (mm) = 5x8x2.5mm. Set of 2 pieces.
 



Ball-Bearing 6x13x5 Rubber Sealed - Oil (2)
#940613

New high-speed ball-bearings manufactured specially for XRAY. ID x OD x thickness (mm) = 6x13x5. Set of 2 pieces.  



Ball-Bearing 10x16x4 Rubber Sealed - Oil (2)
#941016

New high-speed ball-bearings manufactured specially for XRAY. ID x OD x thickness (mm) = 10x16x4. Set of 2 pieces.  



E-Clip 7 (10)
#965070

7mm dia. E-clip. Set of 10 pieces.  



Pin 2x8 (10)
#981208

Polished chrome pin. Dia. x length = 2mm x 8mm. Set of 10 pieces. 



Pin 2x10 (10)
#981210

Polished chrome pin. Dia. x length = 2mm x 10mm. Set of 10 pieces. 

Replaced by Pin 2x9.8 (10) 



ID Product Name Released
334120 Hardened Steel Brake Pad - Laser Cut (2) Apr. 19, 2007
334130 Brake Pad Ferodo® (2) Apr. 19, 2007
334140 Brake Disk Adapter - Alu 7075 T6 Apr. 19, 2007
335255 Composite Wheel Hub (2) Apr. 19, 2007
335450 Pur® Reinforced Drive Belt Rear 5.5x177mm - V2 Apr. 19, 2007
335510 2-Speed Shaft Apr. 19, 2007
335810 Composite Belt Pulley 20T - 2-Speed-Center Apr. 19, 2007
337250 Steel Pivot Ball 8.4mm (2) Apr. 19, 2007
337252 Alu Adjusting Nut M10x1 (4) Apr. 19, 2007
337254 Composite Ball Cup 8.4mm (8) Apr. 19, 2007
337310 Rear Lower Inner Pivot Pin (2) Apr. 19, 2007
901316 Hex Screw SB M3x16 (10) Apr. 19, 2007
901406 Hex Screw SB M4x6 (10) Apr. 19, 2007
940508 Ball-Bearing 5x8x2.5 Rubber Sealed - Oil (2) Apr. 19, 2007
940613 Ball-Bearing 6x13x5 Rubber Sealed - Oil (2) Apr. 19, 2007
941016 Ball-Bearing 10x16x4 Rubber Sealed - Oil (2) Apr. 19, 2007
965070 E-Clip 7 (10) Apr. 19, 2007
303122 Alu Shim 3x6x1.0mm (10) Jan. 31, 2006
303123 Alu Shim 3x6x2.0mm (10) Jan. 31, 2006
303241 Pivot Ball 5.8mm with Hex (4) Jan. 31, 2006