xrayxrayHome XRAY homeXRAY X-shopXRAY X-forumRCAmerica
supportsearchcontactguestbooksite map
newsproductsaboutusworldwide headlines
click to enable quick search
 
Composite Steering Block - Hard
#302253

Molded composite steering block of “hard” hardness (H) for foam-tire racing. The steering block features two Ackermann positions, and uses small but robust 5x10 ball-bearings to minimize unsprung weight. Can be also used for rubber tires. Fits XRAY T2, T3 cars. 



Steel Steering Bushing (2+2)
#302291

Precision-machined bushing for front C-hub steering block pivot screws on XRAY T2, T3. Includes 4 pieces: 2 short + 2 long. 



Composite C-Hub Front Block, Right - 4° Deg.
#302345

Molded composite C-hub for front right steering block on XRAY T2, T3. Caster pre-set at 4° for neutral handling. Engraved with "4R" for easy identification. Use with left-side composite 4° C-hub #302346. 



Composite C-Hub Front Block, Left - 4° Deg.
#302346

Molded composite C-hub for front left steering block on XRAY T2, T3. Caster pre-set at 4° for neutral handling. Engraved with "4L" for easy identification. Use with left-side composite 4° C-hub #302345. 



Ball Joint 4.9mm - Open - V2 (8)
#302663

Molded composite 4.9mm ball joints, open on both sides, for connection to 4.9mm ball. Set of eight. Fits XRAY T2, T3. 



Ball Joint 4.9mm Unidirectional - Open (4)
#302664

Molded composite 4.9mm ball joints, special construction. For connection to 5mm ball. Set of four. Fits XRAY T2, T3. 



Alu Quick Roll-Center Holder™ 4.9mm (2)
#303032

QRC (Quick Roll Center™) holders pre-assembled with #302664 unidirectional ball joints. 



Alu Quick Roll-Center Holder™ 4.9mm – L1+L2 (2)
#303033

4.9mm alu quick roll-center holders allows you to make the upper linkage longer in either front or rear suspension of all T2, T3 cars. Includes a pair of roll centers marked L1 and L2. 



Alu Shim 3x6x1.0mm - Black (10)
#303122-K

Alu shims 3x6mm size, 1mm thick. Black color, set of 10. 



Alu Shim 3x6x2.0mm - Black (10)
#303123-K

Alu shims 3x6mm size, 2mm thick. Black color, set of 10. 



Composite Upright 1° Outboard Toe-In - Right - Hard
#303353

Molded-composite right rear upright features built-in 1° of outboard toe-in to improve the rotation of the car in corners and prevent suspension geometry changes in serious crashes. Hard rigidity (labeled “H”) specially optimized for foam-tire racing. Use with matching left-side rear upright 303363. Can be also used for rubber tires. 



Composite Upright 1° Outboard Toe-In - Left - Hard
#303363

Molded-composite left rear upright features built-in 1° of outboard toe-in to improve the rotation of the car in corners and prevent suspension geometry changes in serious crashes. Hard rigidity (labeled “H”) specially optimized for foam-tire racing. Use with matching right-side rear upright 303353. Can be also used for rubber tires. 



Drive Shaft Coupling for Set Screw – Hudy Spring Steel™
#305231

Hudy Spring Steel™ drive shaft coupling for Set Screw for increased reliability, works in front and rear CVD drive shafts of XRAY T2, T3. Specially hand-ground for maximum precision.  



Drive Shaft Replacement Plastic Cap 3.5mm (4)
#305241

Low friction 3.5mm drive pin clips for protection and cushioning of drive shaft pin in diff outdrives. Set of 4. For use only with T2'008 XRAY alu ball-diffs or Multi-Diff™. 



Drive Shaft 52mm - Hudy Spring Steel™
#305324

CNC-machined 52mm CVD drive shaft made from world-renowned top-secret HUDY Spring Steel™. This race-quality drive shaft is the smallest in the world, exclusively manufactured by HUDY. Drive shaft diff end has been strategically lightened to reduce rotating mass without compromising strength.  



Alu Drive Shaft Swiss 7075 T6 - Hard Coated - 52mm
#305326

Super-lightweight 52mm alu drive shaft CNC-machined from premium Swiss 7075 T6 and hardcoated for extra durability and stylish looks. New design is up to 40% lighter than steel drive shaft. 



Drive Axle – Hudy Spring Steel™
#305340

CNC-machined drive axles for XRAY T2, T3 made from world-renowned top-secret HUDY Spring Steel™. 

Replaced by Drive Axle - Lightweight - Hudy Spring Steel™ 



T2 Composite Wheel Hub (2)
#305355

Strong, lightweight composite wheel hubs for 1/10 touring car. Set of 2. 



Front Arm Pivot Pin (2)
#307221

Front lower outer pivot pins for XRAY T2, T3. Hardened for very high durability and long life. Set of two. 



Rear Arm Pivot Pin (2)
#307321

Rear lower outer pivot pins for XRAY T2, T3. Hardened for very high durability and long life. Set of two. 



Pivot Ball 5.0mm Double Bevel Shoulders (10)
#307455

Specially-machined 5.0mm pivot ball with double bevel shoulders, for use with open 5.0mm ball joints on XRAY T2, T3. Set of 10. 



Hex Screw SB M3x2.5 (10)
#901302

M3x2.5 setscrew, hex drive. Set of 10. 



Hex Screw SB M3x3 (10)
#901303

M3x3 setscrew, hex drive. Set of 10 pieces. 



Hex Screw SB M3x4 (10)
#901304

M3x4 setscrew, hex drive. Set of 10 pieces. 



Hex Screw SB M3x8 (10)
#901308

M3x8 setscrew, hex drive. Set of 10 pieces. 



Hex Screw SB M3x25 (10)
#901325

Setscrews with hex drive. M3x25. Set of 10. 



Hex Screw SH M2x5 (10)
#902205

M2x5 button-head machine screw, hex drive. Set of 10 pieces. 



Hex Screw SH M3x6 (10)
#902306

M3x6 button-head machine screw, hex drive. Set of 10 pieces. 



Hex Screw SH M3x10 (10)
#902310

M3x10 button-head machine screw, hex drive. Set of 10 pieces. 



Hex Screw SH M3x14 (10)
#902314

M3x14 button-head machine screw, hex drive. Set of 10 pieces. 



Ball-Bearing 5x10x4 Rubber Sealed - Oil (2)
#940510

New high-speed ball-bearings manufactured specially for XRAY. ID x OD x thickness (mm) = 5x10x4. Set of 2 pieces. 



Pin 2x9.8 (10)
#980210

Polished chrome pin. Dia. x length = 2mm x 9.8mm. Set of 10 pieces. 



ID Product Name Released
303122-K Alu Shim 3x6x1.0mm - Black (10) Oct. 16, 2009
303123-K Alu Shim 3x6x2.0mm - Black (10) Oct. 16, 2009
303033 Alu Quick Roll-Center Holder™ 4.9mm – L1+L2 (2) Apr. 24, 2009
305326 Alu Drive Shaft Swiss 7075 T6 - Hard Coated - 52mm Sep. 26, 2008
980210 Pin 2x9.8 (10) Feb. 27, 2008
302253 Composite Steering Block - Hard Nov. 28, 2007
303353 Composite Upright 1° Outboard Toe-In - Right - Hard Nov. 28, 2007
303363 Composite Upright 1° Outboard Toe-In - Left - Hard Nov. 28, 2007
305241 Drive Shaft Replacement Plastic Cap 3.5mm (4) Nov. 28, 2007
305324 Drive Shaft 52mm - Hudy Spring Steel™ Nov. 28, 2007
305355 T2 Composite Wheel Hub (2) Aug. 15, 2006
302291 Steel Steering Bushing (2+2) Jan. 31, 2006
302345 Composite C-Hub Front Block, Right - 4° Deg. Jan. 31, 2006
302346 Composite C-Hub Front Block, Left - 4° Deg. Jan. 31, 2006
302663 Ball Joint 4.9mm - Open - V2 (8) Jan. 31, 2006
302664 Ball Joint 4.9mm Unidirectional - Open (4) Jan. 31, 2006
303032 Alu Quick Roll-Center Holder™ 4.9mm (2) Jan. 31, 2006
305231 Drive Shaft Coupling for Set Screw – Hudy Spring Steel™ Jan. 31, 2006
305340 Drive Axle – Hudy Spring Steel™ Jan. 31, 2006
307221 Front Arm Pivot Pin (2) Jan. 31, 2006