xrayxrayHome XRAY homeXRAY X-shopXRAY X-forumRCAmerica
supportsearchcontactguestbooksite map
newsproductsaboutusworldwide headlines
click to enable quick search
 
T3 FRP Chassis 2.5mm - Rubber-Spec
#301129

CNC-machined 6-cell chassis of 2.5mm premium-grade graphite material, specially designed and optimized for rubber-tire racing. Features slots for 6-cell batteries. Accommodates 5- or 6-cell NiMH battery packs or a single LiPo battery. Fits XRAY T3. 



T3 Graphite Chassis 3.0mm - Foam-Spec
#301130

CNC-machined 6-cell chassis of 3.0mm thick, premium-grade graphite material, specially designed and optimized for foam-tire racing. Features slots for 6-cell batteries. Accommodates 5- or 6-cell NiMH battery packs or a single LiPo battery. Fits XRAY T3. 



Alu Countersunk Shim - Orange (4)
#301159-O

Machined alu countersunk shims for use on XRAY Quick Saver™. Orange colour. Set of 4. 



T3 Graphite Upper Deck 2.0mm - Rubber-Spec
#301190

CNC-machined upper deck of premium-grade 2.0mm thick graphite material, specially designed and optimized for rubber-tire racing conditions. Fits XRAY T3. 



T3 Graphite Upper Deck 2.0mm - Foam-Spec
#301191

CNC-machined upper deck of premium-grade 2.0mm thick graphite material, specially designed and optimized for foam-tire racing conditions. Fits XRAY T3. 



Composite Bumper
#301202

Lower bumper holder made from tough composite material. Fits XRAY T2, T3 cars. 



Graphite Bumper Upper Holder 2.5mm for Adj. Body Mounts
#301210

CNC-machined front upper bumper holder made from premium-grade graphite material. 



Upper Holder for Bumper - 2.5mm Graphite
#301213

CNC-machined front upper bumper holder made from highest-quality 2.5mm woven graphite. 

Replaced by Graphite Bumper Upper Holder 2.5mm for Adj. Body Mounts 



Foam Bumper - Hard
#301223

Foam bumper made from extra hard foam is a direct and perfect fit. Made from lightweight yet very stiff foam, it will protect the car better as it will not yield even in heavy crashes. Recommended for all racing conditions but especially for tracks with rigid or sharp perimeter boards. 



T4 Foam Bumper - Hard
#301226

High-quality hard front foam bumper, hand-cut from specially-developed extra hard foam material. Very light, yet very strong. Protects front of car in serious collisions.  



T4 Foam Bumper - Light & Strong
#301227

High-quality front foam bumper, hand-cut from specially-developed hard foam material. Very light, yet very strong.  

Replaced by Foam Bumper for Adj. Body Mounts - Light 



T4 Foam Bumper Wide - Hard
#301228

High-quality hard front foam bumper, hand-cut from specially-developed extra hard foam material. Protects front of car in serious collisions. Same dimensions as #301227 foam bumper. 

Replaced by Foam Bumper for Adj. Body Mounts - Hard 



Foam Bumper for Adj. Body Mounts - Light
#301231

High-quality front foam bumper, hand-cut from specially-developed hard foam material. 



Foam Bumper for Adj. Body Mounts - Hard
#301232

High-quality hard front foam bumper, hand-cut from specially-developed extra hard foam material.  



Front Body Mount Set 6mm
#301322

Front body mount set includes redesigned 6mm-thick bodyposts and all other mounting hardware. Fits XRAY T2 and NT1. 



Front Body Mount Set +1mm Height
#301323

XRAY presents +1mm height-adjustable body posts for the T2 and NT1. For serious racers who focus on the small details, body height plays a very important role in the performance of the car and as such, ultra-fine body height tuning was developed by XRAY R&D engineers to address this increasingly important tuning set-up feature. 



Rear Body Mount Set 6mm
#301332

Rear body mount set includes redesigned 6mm-thick bodyposts and all other mounting hardware. Fits XRAY T2 and NT1. 



Rear Body Mount Set +1mm Height
#301333

XRAY presents +1mm height-adjustable body posts for the T2 and NT1. For serious racers who focus on the small details, body height plays a very important role in the performance of the car and as such, ultra-fine body height tuning was developed by XRAY R&D engineers to address this increasingly important tuning set-up feature. 



Alu Adjustable Body Post Stop (2)
#301351-O

Very handy, easily externally adjustable body posts from Swiss 7075 T6 aluminum. Allows for adjustment of body height by 3mm without needing to change the position on the body post. 



Alu Adjustable Body Post Stop Nut (2)
#301352-O

Alu body post stop nut for #301351-O made from Swiss 7075 T6 aluminum. Spare part for #301351-O Alu Adjustable Body Post Stop (2). 



T3 Alu Upper Clamp with Adj. Roll-Center RR-FL - Orange
#302028-O

Ultra-light, ultra-strong upper clamp for bulkheads with adjustment roll-center positions, CNC-machined from premium Swiss 7075 T6 aluminum, orange color. Roll-center positions provide a great range of adjustments for both front and rear suspension roll centers. 



Alu Nut for Suspension Holder (2)
#302033

CNC-machined alu nut holds lower molded suspension holders. Set of 2, fits XRAY T2, T3.  



Alu Nut for Suspension Holder - Orange (2)
#302033-O

CNC-machined alu nut holds lower molded suspension holders. Orange colour.
Set of 2, fits XRAY T2, T3 cars.  



T3 Alu Lower Suspension Holder - Orange
#302046-O

CNC-machined alu lower suspension holder which is part of all-new suspension holder system allows suspension arms to be mounted independently from the diff bulkheads. Orange color. Fits XRAY T3. 



Alu Chassis Brace
#302054

Alu chassis brace is CNC-machined from high-grade aluminum. It is recommended for carpet tracks with medium to super-high traction.  



Alu Chassis Brace - Black
#302054-K

Alu chassis brace is CNC-machined from high-grade aluminum. It is recommended for carpet tracks with medium to super-high traction. Black color. 



Set of Eccentric Composite Hubs ''1'' (4+2)
#302077

Set of 1mm-offset molded composite eccentric hubs support ball-bearings for differentials (4 hubs) and center layshaft (2 hubs). Fits XRAY T2’008, T3. 



Graphite Shock Tower Front 3.0mm - V2
#302087

CNC-machined front shock tower made from 3.0mm thick premium graphite material to guarantee maximum strength and long life. Low height allows the new shorter shocks to be mounted lower, thus lowering the CG even more and improving steering response. Specially machined for ultra-low weight without compromising strength. Fits XRAY T2, T3 cars. 



Front Suspension Arm - Hard
#302161

Hard molded composite front lower suspension arm. Recommended for use in standard conditions or with rubber tires. Marked with “H” for easy identification. May be used on either left or right side. 



Front Suspension Arm - Extra-Hard
#302162

Extra-hard molded composite front lower suspension arm. Recommended for use in high-grip conditions or with foam tires. Marked with “XH” for easy identification. May be used on either left or right side. 



Front Susp. Arm - Extra-Hard - 1-Hole
#302164

Molded composite front lower suspension. Extra-hard composite mixture arms (labeled “XH”) for high-traction foam-tire racing. The specially-formulated composite material allows for a very light yet very durable suspension arm that can withstand the rigors of high-performance racing with foam tires. Can be also used for rubber tires. Fits XRAY T2, T3 cars. 



Composite Front Susp. Arm 2-Hole - Hard
#302165

Molded composite front lower suspension arms with 2-holes for optional setting. Inner position is used for increased steering, outer position is used for more stable handling. Standard hard-composite mixture arms (labeled “H”) for rubber-tire racing. Can be also used for foam tires. Fits XRAY T3. 



Composite Front Susp. Arm 2-Hole - X-Hard
#302166

Molded composite front lower suspension arms with 2-holes for optional setting. Inner position is used for increased steering, outer position is used for more stable handling. Extra-hard composite mixture arms (labeled “XH”) for high-traction foam-tire racing. Can be also used for rubber tires. Fits XRAY T3. 



Comp. Front Susp. Arm 1-Hole - Graphite
#302167

Molded lightweight composite front lower suspension arm. The specially-formulated graphite composite material allows for a very light suspension arm that can withstand the rigors of high-performance racing. 



Composite Steering Block - Medium - V2
#302252

Molded composite steering block of “medium” hardness (M) for rubber-tire racing. The steering block features two Ackermann positions, and uses small but robust 5x10 ball-bearings to minimize unsprung weight. Can be also used for foam tires. Fits XRAY T2, T3 cars. 



Alu Steering Block
#302256

Alu Steering Block for XRAY T2 is CNC-machined from premium lightweight T6 aluminum, polished for luxuriuous and stylish appearance. Ultra-strong construction provides very long life and durability in even the most extreme racing conditions.  



Ball-Bearing Composite Bushing (4)
#302295

Molded composite bushings for installing ball-bearings in alu steering blocks (302256) and alu rear uprights (303358 and 303359). Set of 4. 



Composite C-Hub Bushing (2+2)
#302296

Composite bushings for T2, T3 alu C-hubs. 



Alu C-Hub Block - Caster 0° - Orange
#302334

CNC-machined highest-quality duraluminum C-hub for XRAY T4. Caster pre-set at 0 degrees. Engraved with "0" for easy identification. Fits left or right sides. Includes two nylon bushings. 



Alu C-Hub Front Block Right - Caster 2° - Orange
#302335

CNC-machined high-quality Swiss 7075 T6 RIGHT C-hub. Caster pre-set at 2°, engraved with "2" for easy identification. Orange color. 



Alu C-Hub Front Block Left - Caster 2° - Orange
#302336

CNC-machined high-quality Swiss 7075 T6 LEFT C-hub. Caster pre-set at 2°, engraved with "2" for easy identification. Orange color. 



Alu C-Hub Front Block Right - Caster 4° - Orange
#302337

CNC-machined highest-quality duaraluminum C-hub for right steering block of T2, T3. Caster pre-set at 4°. Engraved with "R4" to easy identification. Includes two nylon bushings. Use with left-side alu 4° C-hub #302338.  



Alu C-Hub Front Block Left - Caster 4° - Orange
#302338

CNC-machined highest-quality duaraluminum C-hub for left steering block of T2, T3. Caster pre-set at 4°. Engraved with "L4" to easy identification. Includes two nylon bushings. Use with right-side alu 4° C-hub #302337.  



Alu C-Hub Front Block Right - Caster 6° - Orange
#302339

CNC-machined highest-quality duaraluminum C-hub for right steering block of T2, T3. Caster pre-set at 6°. Engraved with "R6" to easy identification. Includes two nylon bushings. Use with left-side alu 6° C-hub #302340.  



Alu C-Hub Front Block Left - Caster 6° - Orange
#302340

CNC-machined highest-quality duaraluminum C-hub for left steering block of T2, T3. Caster pre-set at 6°. Engraved with "L6" to easy identification. Includes two nylon bushings. Use with right-side alu 6° C-hub #302339.  



Composite C-Hub Front Block, Right - 2° Deg.
#302343

Molded C-hub for right steering block of T2, T3. Caster pre-set at 2°. Engraved with "R2" to easy identification. Use with left-side composite 2° C-hub #302344.  



Composite C-Hub Front Block, Left - 2° Deg.
#302344

Molded C-hub for left steering block of T2, T3. Caster pre-set at 2°. Engraved with "L2" to easy identification. Use with right-side composite 2° C-hub #302343.  



Composite C-Hub Front Block, Right - 6° Deg.
#302347

Molded C-hub for right steering block of T2, T3. Caster pre-set at 6°. Engraved with "R6" to easy identification. Use with left-side composite 6° C-hub #302348.  



Composite C-Hub Front Block, Left - 6° Deg.
#302348

Molded C-hub for left steering block of T2, T3. Caster pre-set at 6°. Engraved with "L6" to easy identification. Use with right-side composite 6° C-hub #302347.  



Composite C-Hub Right - 0° Deg. - Medium
#302359

Molded composite C-hub for right steering block. The inside hole was enlarged to allow to use new extra stong ECS driveshafts.  



Composite C-Hub Left - 0° Deg. - Medium
#302360

Molded composite C-hub for left steering block. The inside hole was enlarged to allow to use new extra stong ECS driveshafts.  



Composite C-Hub Right - 2° Deg. - Medium (ECS)
#302361

Molded composite C-hub for right steering block of T2, T3. Caster pre-set at 2°. Medium rigidity for rubber-tire racing. Use with matching left-side C-hub #302362. Can be also used for foam tires. 



Composite C-Hub Left - 2° Deg. - Medium (ECS)
#302362

Molded composite C-hub for left steering block of T2, T3. Caster pre-set at 2°. Medium rigidity for rubber-tire racing. Use with matching right-side C-hub #302361. Can be also used for foam tires. 



Composite C-Hub Right - 4° Deg. - Medium
#302363

Molded composite C-hub for right steering block of T2, T3. Caster pre-set at 4°. Medium rigidity for rubber-tire racing. Use with matching left-side C-hub #302364. Can be also used for foam tires. 



Composite C-Hub Left - 4° Deg. - Medium
#302364

Molded composite C-hub for left steering block of T2, T3. Caster pre-set at 4°. Medium rigidity for rubber-tire racing. Use with matching right-side C-hub #302363. Can be also used for foam tires. 



Composite C-Hub Right - 6° Deg. - Medium (ECS)
#302365

Molded composite C-hub for right steering block of T2, T3. Caster pre-set at 6°. Medium rigidity for rubber-tire racing. Use with matching left-side C-hub #302366. Can be also used for foam tires. 



Composite C-Hub Left - 6° Deg. - Medium (ECS)
#302366

Molded composite C-hub for left steering block of T2, T3. Caster pre-set at 6°. Medium rigidity for rubber-tire racing. Use with matching right-side C-hub #302365. Can be also used for foam tires. 



Composite C-Hub Right - 0° Deg. - Hard (ECS)
#302369

Molded composite C-hub for right steering block. Caster pre-set at 0°. HARD rigidity for rubber-tire racing and also foam tire racing. Use with matching left-side C-hub #302370. 



Composite C-Hub Left - 0° Deg. - Hard (ECS)
#302370

Molded composite C-hub for left steering block. Caster pre-set at 0°. HARD rigidity for rubber-tire racing and also foam tire racing. Use with matching right-side C-hub #302369. 



Composite C-Hub Right - 2° Deg. - Hard (ECS)
#302371

Molded composite C-hub for right steering block of T2, T3. Caster pre-set at 2°. Hard rigidity for foam-tire racing. Use with matching left-side C-hub #302372. Can be also used for rubber tires. 



Composite C-Hub Left - 2° Deg. - Hard (ECS)
#302372

Molded composite C-hub for left steering block of T2, T3. Caster pre-set at 2°. Hard rigidity for foam-tire racing. Use with matching right-side C-hub #302371. Can be also used for rubber tires. 



Composite C-Hub Right - 4° Deg. - Hard (ECS)
#302373

Molded composite C-hub for right steering block of T2, T3. Caster pre-set at 4°. Hard rigidity for foam-tire racing. Use with matching left-side C-hub #302374. Can be also used for rubber tires. 



Composite C-Hub Left - 4° Deg. - Hard (ECS)
#302374

Molded composite C-hub for left steering block of T2, T3. Caster pre-set at 4°. Hard rigidity for foam-tire racing. Use with matching right-side C-hub #302373. Can be also used for rubber tires. 



Composite C-Hub Right - 6° Deg. - Hard
#302375

Molded composite C-hub for right steering block of T2, T3. Caster pre-set at 6°. Hard rigidity for foam-tire racing. Use with matching left-side C-hub #302376. Can be also used for rubber tires. 



Composite C-Hub Left - 6° Deg. - Hard
#302376

Molded composite C-hub for left steering block of T2, T3. Caster pre-set at 6°. Hard rigidity for foam-tire racing. Use with matching right-side C-hub #302375. Can be also used for rubber tires. 



Composite C-Hub Right - 0° Deg. - Graphite (ECS)
#302379

Molded composite C-hub for right steering block. The inside hole was enlarged to allow to use new extra stong ECS driveshafts. 



Composite C-Hub Left - 0° Deg. - Graphite (ECS)
#302380

Molded composite C-hub for left steering block. The inside hole was enlarged to allow to use new extra stong ECS driveshafts.  



Composite C-Hub Right - 4° Deg. - Graphite (ECS)
#302383

Molded composite C-hub for right steering block. The inside hole was enlarged to allow to use new extra stong ECS driveshafts. 



Composite C-Hub Left - 4° Deg. - Graphite (ECS)
#302384

Molded composite C-hub for left steering block. The inside hole was enlarged to allow to use new extra stong ECS driveshafts.  



Anti-Roll Bar Front (Set)
#302401

If your XRAY T2, T3 is oversteering, then try this optional front anti-roll bar set. The front anti-roll bar will decrease front chassis roll and decrease front traction, reducing your car’s steering. This complete front anti-roll bar set for the XRAY T2, T3 includes all necessary hardware, and includes three different anti-roll bars: 1.2, 1.4, and 1.6mm. 



Anti-Roll Bar Front 1.0mm
#302480

Optional front anti-roll bar for T2 & T3 cars. 



Anti-Roll Bar Front 1.1mm
#302481

Optional front anti-roll bar for T2 & T3 cars. 



Anti-Roll Bar Front 1.2mm
#302482

Front anti-roll bar, 1.2mm dia, gold colour. Same bar as included in #302401 Front Anti-Roll Bar Set. 



Anti-Roll Bar Front 1.3mm
#302483

Front anti-roll bar, 1.3mm dia, black colour. Optional bar for #302401 Front Anti-Roll Bar Set. Marked with 3 laser-engraved lines for easy identification. 



Anti-Roll Bar Front 1.4mm
#302484

Front anti-roll bar, 1.4mm dia, silver colour. Same bar as included in #302401 Front Anti-Roll Bar Set. 



Anti-Roll Bar Front 1.5mm
#302485

Front anti-roll bar, 1.5mm dia, black colour. Optional bar for #302401 Front Anti-Roll Bar Set. Marked with 5 laser-engraved lines for easy identification. 



Anti-Roll Bar Front 1.6mm
#302486

Front anti-roll bar, 1.6mm dia, black colour. Same bar as included in #302401 Front Anti-Roll Bar Set. 



Anti-Roll Bar Front 1.8mm
#302488

Front anti-roll bar, 1.8mm dia, black colour. Optional bar for #302401 Front Anti-Roll Bar Set. Marked with 8 laser-engraved lines for easy identification. 



Adj. Steering Rod L/R 40mm - Hudy Spring Steel™ (2)
#302610

Set of two adjustable steering rod turnbuckles, manufactured from world-renowned top-secret "Hudy Spring Steel". 



Alu Adjustable Turnbuckle M3 L/R 39mm - SWISS 7075 T6 (2)
#302612

Adjustable left & right M3 steering turnbuckles manufactured from strong, lightweight 7075 T6 aluminum. Precision hreading for fine toe adjustment.  



Alu Adjustable Turnbuckle 39mm M3 L/R - Orange (2)
#302612-O

For serious racers who are conscious of weight savings, XRAY offers adjustable left & right M3 steering turnbuckles manufactured from strong, lightweight 7075 T6 aluminum. Lighter by 50%. Precision threading for fine toe adjustment. Length of 39mm. Orange color. Set of 2. 



Adj. Steering Rod 20mm - Hudy Spring Steel™ (2)
#302630

Set of two adjustable steering rod turnbuckle, manufactured from world-renowned top-secret "Hudy Spring Steel". 



T2 007 Ball End 4.9mm with Thread (2)
#302652

4.9mm ball end with short threaded section. Set of 2. Fits T2’007. 

Replaced by Ball End 4.9mm with 4mm Thread (2) 



Ball End 4.9mm With Thread 6mm (2)
#302653

Threaded 4.9mm ball end with 6mm thread for rear suspension on T2 family of cars to replace the ball + screw assembly. These balls are great for use with closed composite ball joints #302661 but also work with standard open ball joints. Set of 2. 

Replaced by Ball End 4.9mm With Thread 6mm (2) 



Ball End 4.9mm With Thread 8mm - V2 (2)
#302654

Threaded 4.9mm ball end with 8mm thread for front suspension on T2 family of cars to replace the ball + screw assembly. These balls are great for use with closed composite ball joints #302661 but also work with standard open ball joints. Set of 2. 

Replaced by Ball End 4.9mm With Thread 8mm (2) 



Ball End 4.9mm With Thread 10mm (2)
#302655

Threaded 4.9mm ball end with 10mm thread replaces ball+screw assembly on front suspension of the T2 & T3 family of cars. These ball ends are great for use with closed composite ball-joints #302661 but also work with standard open ball-joints. Set of 2. 



Composite Ball Joint 4.9mm - Closed (4)
#302661

Molded composite steering ball-joint for T2 family of cars and T3. Fits 4.9mm pivot ball or ball stud. Set of 4.

The closed ball joint prevents dust from getting onto the ball end, allowing the upper camber links to move more freely. The closed ball joints must be used with ball ends #302653 or #302654; these ball ends are available in two lengths for front and rear suspension, respectively. 



Composite Ball Joint 4.9mm - Closed with Hole (4)
#302665

Molded composite steering ball-joint for T2 family of cars and T3. Fits 5mm pivot ball or ball stud. Set of 4.  



Alu Quick Roll-Center Holder™ 4.9mm - Orange (2)
#303032-O

QRC (Quick Roll Center™) holders pre-assembled with #302664 unidirectional ball joints. Orange colour. 



Alu Quick Roll-Center Holder™ 4.9mm – L1+L2 (2)
#303033

4.9mm alu quick roll-center holders allows you to make the upper linkage longer in either front or rear suspension of all T2, T3 cars. Includes a pair of roll centers marked L1 and L2. 



Alu Quick Roll-Center Holder™ 4.9mm H1 + H2
#303035

Matched pair of CNC-machined high-grade aluminum holders — marked H1 and H2 – 1mm higher with the same length than L1 + L2 (lower) holders, allowing car to roll more. May be used at either front or rear. 



Graphite Motor Guard
#303060

CNC-machined graphite motor guard for T1FK’05 and T2 protects the motor endbell from collisions. Includes mounting hardware.  



Belt Tensioner Set T2'007, T2'008, T2'009, T3
#303071

Smart, easy-to-use XRAY Belt Tensioner Set for controlling center drive belt tension and twisting. High-quality components include CNC-machined lightweight alu mounting post, high-speed ball-bearings, and mounting hardware. Fits T2'007, T2'008, T2'009, T3 cars. 



T3 Graphite Shock Tower Rear 3.0mm
#303089

CNC-machined super-low rear shock tower made from 3.0mm thick premium graphite material to guarantee maximum strength and long life. Low height allows the new shorter shocks to be mounted lower, thus lowering the CG even more and improving steering response. Fits XRAY T3. 



Set of Alu Shim (0.5mm, 1.5mm, 2.5mm)
#303120

Ultimate assortment of set-up shims. You can use the shims for easy and accurate adjustment of:
• front and rear roll center
• front bump steer
• front and rear toe-in
• wheelbase  



Set of Alu Shim (1.0mm, 2.0mm, 3.0mm)
#303121

Ultimate assortment of set-up shims. You can use the shims for easy and accurate adjustment of:
• front and rear roll center
• front bump steer
• front and rear toe-in
• wheelbase  



Alu Shim 3x6x0.5mm - Black (10)
#303121-K

Alu shims 3x6mm size, 0.5mm thick. Black color. Set of 10. 



Alu Shim 3x6x0.5mm - Orange (10)
#303121-O

Alu shims 3x6mm size, 0.5mm thick. Orange color. Set of 10. 



T2 Alu Shim 3x6x1.0mm (10)
#303122

Alu shims 3x6mm size, 1mm thick. Silver color, set of 10. 



Alu Shim 3x6x1.0mm - Black (10)
#303122-K

Alu shims 3x6mm size, 1mm thick. Black color, set of 10. 



T2 Alu Shim 3x6x1.0mm - Orange (10)
#303122-O

Alu shims 3x6mm size, 1mm thick. Orange color, set of 10. 



T2 Alu Shim 3x6x2.0mm (10)
#303123

Alu shims 3x6mm size, 2mm thick. Silver color, set of 10. 



Alu Shim 3x6x2.0mm - Black (10)
#303123-K

Alu shims 3x6mm size, 2mm thick. Black color, set of 10. 



T2 Alu Shim 3x6x2.0mm - Orange (10)
#303123-O

Alu shims 3x6mm size, 2mm thick. Orange color, set of 10. 



Alu Shim 3x6x3.0mm (10)
#303125

Alu shims 3x6mm size, 3mm thick. Set of 10. 



Alu Shim 3x6x3.0mm - Black (10)
#303125-K

Alu shims 3x6mm size, 3mm thick. Black color. Set of 10. 



Alu Shim 3x6x3.0mm - Orange (10)
#303125-O

Alu shims 3x6mm size, 3mm thick. Orange color. Set of 10. 



Alu Shim 3x6x5.0mm - Black (10)
#303126-K

Alu shims 3x6mm size, 5mm thick. Black color, set of 10. 



Steel Shim for Lower Susp. Holder 3x7.5x0.4 (10)
#303131

Steel shims, 0.4mm thick, for track-width and rear toe adjustment on XRAY T2. Set of 10. 



Steel Shim for Lower Susp. Holder 3x7.5x0.75 (10)
#303132

Steel shims, 0.75mm thick, for track-width and rear toe adjustment on XRAY T2. Set of 10. 



Steel Shim for Lower Susp. Holder 3x7.5x1.15 (10)
#303133

Steel shims, 01.15mm thick, for track-width and rear toe adjustment on XRAY T2. Set of 10. 



Alu Shim for Lower Susp. Holder 3x7.5x1.5 (10)
#303134

Alu shims, 1.5mm thick, for track-width and rear toe adjustment on XRAY T2. Set of 10. 



Alu Shim for Lower Susp. Holder 3x7.5x1.5 - Black (10)
#303134-K

Alu shims, 1.5mm thick, for track-width and rear toe adjustment on XRAY T2. Set of 10. Black colour. 



Alu Shim 3x5x2.0mm - Orange (10)
#303140-O

Alu shims 3x5mm, 2.0mm thick which can be used for various purposes including roll center adjustment. Orange color. Set of 10.

Color may slightly vary between products.
 



Alu Shim 3x5x1.0 (10)
#303141

Alu shims, 1.0mm thick, for rear roll center adjustment on XRAY T2. Set of 10. 



Alu Shim 3x5x1.0mm - Orange (10)
#303141-O

Alu shims 3x5mm, 1mm thick which can be used for various purposes including roll center adjustment.  



Alu Shim 3x5x0.5mm - Orange (10)
#303142-O

Alu shims 3x5mm, 0.5mm thick which can be used for various purposes including roll center adjustment. Orange color. Set of 10. 



Alu Shim 3x5x0.25mm (10)
#303143

Alu shims 3x5mm, 0.25mm thick which can be used for various purposes including roll center adjustment. Set of 10.  



Alu Shim 3x5x4.0mm - Orange
#303144-O

Alu shims 3x5mm, 4mm thick which can be used for various purposes.  



Rear Suspension Arm - Hard
#303161

Hard molded composite rear lower suspension arm. Recommended for use in standard conditions or with rubber tires. Marked with “H” for easy identification. May be used on either left or right side. 



Rear Suspension Arm - Extra-Hard
#303162

Extra-hard molded composite rear lower suspension arm. Recommended for use in high-grip conditions or with foam tires. Marked with “XH” for easy identification. May be used on either left or right side. 



Composite Rear Susp. Arm 1-Hole - Extra-Hard - V2
#303164

Molded composite rear lower suspension arm of extra-hard composite mixture (labeled “XH”) for foam-tire racing. The specially-formulated composite material allows for a very light yet very durable suspension arm that can withstand the rigors of high-performance racing with foam tires. Can be also used for rubber tires. Fits XRAY T2, T3 cars. 



Composite Rear Susp. Arm 2-Hole - Hard
#303165

Molded composite rear lower suspension arms with 2-holes for optional setting. Inner position is used for increased steering, outer position is used for more stable handling. Standard hard-composite mixture arms (labeled “H”) for rubber-tire racing. The specially-formulated composite material allows for a very light yet very durable suspension arm that can withstand the rigors of high-performance racing with rubber tires. Can be also used for foam tires. Fits XRAY T2, T3 cars. 



Composite Rear Susp. Arm 2-Hole - X-Hard
#303166

Molded composite rear lower suspension arms with 2-holes for optional setting. Inner position is used for increased steering, outer position is used for more stable handling. Extra-hard composite mixture arms (labeled “XH”) for foam-tire racing. The specially-formulated composite material allows for a very light yet very durable suspension arm that can withstand the rigors of high-performance racing with foam tires. Can be also used for rubber tires. Fits XRAY T2, T3 cars. 



Comp. Rear Susp. Arm 1-Hole - Graphite
#303167

Molded lightweight composite rear lower suspension arm. The specially-formulated graphite composite material allows for a very light yet suspension arm that can withstand the rigors of high-performance racing. 



Rear Turnbuckle L/R 25mm - Spring Steel (2)
#303210

Set of two adjustable turnbuckle for adjusting camber of rear uprights, manufactured from world-renowned top-secret "Hudy Spring Steel". 



Alu Adjustable Turnbuckle M3 L/R 26mm - Swiss 7075 T6 (2)
#303212

Adjustable left & right M3 steering turnbuckles manufactured from strong, lightweight 7075 T6 aluminum. Precision hreading for fine toe adjustment.
 



Alu Adjustable Turnbuckle 26mm M3 L/R - Orange (2)
#303212-O

For serious racers who are conscious of weight savings, XRAY offers adjustable left & right M3 steering turnbuckles manufactured from strong, lightweight 7075 T6 aluminum. Lighter by 50%. Precision threading for fine toe adjustment. Length of 26mm. Orange color. Set of 2. 



Composite Upright 1° Outboard Toe-In - Right - Medium
#303351

Molded-composite right rear upright features built-in 1° of outboard toe-in to improve the rotation of the car in corners and prevent suspension geometry changes in serious crashes. Medium rigidity (labeled “M”) specially optimized for rubber-tire racing. Use with matching left-side rear upright 303361. Can be also used for foam tires. 



Composite Upright 0° Outboard Toe-In - Medium
#303352

Molded-composite rear upright features built-in 0° of outboard toe to improve traction and prevent suspension geometry changes in serious crashes. Medium rigidity (labeled “M”) specially optimized for rubber-tire racing. Use on both left and right sides of the car. Can be also used for foam tires. 



Composite Upright 0° Outboard Toe-In - Hard
#303354

Molded-composite rear upright features built-in 0° of outboard toe to improve traction and prevent suspension geometry changes in serious crashes. Hard rigidity (labeled “H”) specially optimized for foam-tire racing. Use on both left and right sides of the car. Can be also used for rubber tires. 



Alu Upright Rear 1° Outboard Toe-In (L+R)
#303358

CNC-machined rear upright made from premium lightweight T6 aluminum. Ultra-strong rear upright provides very long life and durability in even the most extreme racing conditions, features an integrated 1° outboard toe-in. Use of outboard toe-in will increase the corner speed. Complete set of left and right blocks.  



Alu Upright Rear 2° Outboard Toe-In (L+R)
#303359

CNC-machined rear upright made from premium lightweight T6 aluminum. Ultra-strong rear upright provides very long life and durability in even the most extreme racing conditions, features an integrated 2° outboard toe-in. Use of outboard toe-in will increase the corner speed. Complete set of left and right blocks.  



Composite Upright 1° Outboard Toe-In - Left - Medium
#303361

Molded-composite left rear upright features built-in 1° of outboard toe-in to improve the rotation of the car in corners and prevent suspension geometry changes in serious crashes. Medium rigidity (labeled “M”) specially optimized for rubber-tire racing. Use with matching right-side rear upright 303351. Can be also used for foam tires. 



Composite Upright 0° Outboard Toe - Medium - 1-Hole
#303362

Molded-composite rear upright features built-in 0° of outboard toe to improve traction and prevent suspension geometry changes in serious crashes. This 1-hole upright may be used on high-traction tracks or tracks with long sweepers, since the position of the center hole will allow faster driving through those corners because of better cornering speed.  



Composite Upright 0° Outboard Toe - Hard - 1-Hole
#303364

Molded-composite rear upright features built-in 0° of outboard toe to improve traction and prevent suspension geometry changes in serious crashes. This 1-hole upright may be used on high-traction tracks or tracks with long sweepers, since the position of the center hole will allow faster driving through those corners because of better cornering speed. 



Anti-Roll Bar Rear (Set)
#303401

If your XRAY T2, T3 is understeering, then try this optional rear anti-roll bar set. The rear anti-roll bar will decrease rear chassis roll and decrease rear traction, increasing your car’s steering. This complete rear anti-roll bar set for the XRAY T2, T3 includes all necessary hardware, and includes three different anti-roll bars: 1.2, 1.4, and 1.6mm. 



Composite Anti-Roll Bar Holders
#303411

Molded composite anti-roll bar holders, same as included in anti-roll bar sets #302401 (front) and #303401 (rear). Set of 8. 



Alu 4.9mm Ball End (2)
#303431

Alu 4.9mm ball ends, same as included in anti-roll bar sets #302401 (front) and #303401 (rear). Set of 2. 

Replaced by Alu 4.9mm Ball End - Black (2) 



Alu 4.9mm Ball End - Black (2)
#303431-K

Alu 4.9mm ball ends, same as included in anti-roll bar sets #302401 (front) and #303401 (rear). Set of 2. Black colour. 



Alu Anti-Roll Bar Collar (2)
#303440

Alu anti-roll bar collars remove play from the front anti-roll bar wire, increasing cornering speed and stability. Intended for serious racers who desire maximum performance from their car. Fits all T2 cars. Set of 2 collars and setscrews. 



Ball Joint 4.9mm - Open (4)
#303454

Molded composite 4.9mm ball joints for anti-roll bar links, same as included in anti-roll bar sets #302401 (front) and #303401 (rear). Set of 4. 



Anti-Roll Bar Rear 1.0mm
#303480

Optional rear anti-roll bar for T2 & T3 cars. 



Anti-Roll Bar Rear 1.1mm
#303481

T2, T3 rear anti-roll bar, 1.1mm dia, black colour. Optional bar for #303401 Rear Anti-Roll Bar Set. Marked with 1 laser-engraved line for easy identification. 



Anti-Roll Bar Rear 1.2mm
#303482

T2, T3 rear anti-roll bar, 1.2mm dia, gold colour. Same bar as included in #303401 Rear Anti-Roll Bar Set. 



Anti-Roll Bar Rear 1.3mm
#303483

T2, T3 rear anti-roll bar, 1.3mm dia, black colour. Optional bar for #303401 Rear Anti-Roll Bar Set. Marked with 3 laser-engraved lines for easy identification. 



Anti-Roll Bar Rear 1.4mm
#303484

T2, T3 rear anti-roll bar, 1.4mm dia, silver colour. Same bar as included in #303401 Rear Anti-Roll Bar Set. 



Anti-Roll Bar Rear 1.5mm
#303485

T2, T3 rear anti-roll bar, 1.5mm dia, black colour. Optional bar for #303401 Rear Anti-Roll Bar Set. Marked with 5 laser-engraved lines for easy identification. 



Anti-Roll Bar Rear 1.6mm
#303486

T2, T3 rear anti-roll bar, 1.6mm dia, black colour. Same bar as included in #303401 Rear Anti-Roll Bar Set. 



XRAY Gear Differential - Set
#304900

Complete gear differential set for XRAY T3 includes composite differential case and cover with pulley. 



Composite Gear Differential Case & Cover
#304910

Gear differential case and cover made from tough composite material. Used for front or rear differentials. Fits #304900 composite gear differential. 



Composite Gear Differential Bevel & Satelitte Gears (2+4)
#304930

Gear differential precision internal gears made from tough composite material. Includes 2 bevel gears and 4 satellite gears.  



Graphite Gear Differential Bevel & Satelitte Gears (2+4)
#304931

Gear differential precision internal gears made from new graphite composite mixture.  

Replaced by Graphite Gear Diff Bevel & Satelitte Gears (2+4) - Lower 



Graphite Gear Diff Bevel & Satelitte Gears (2+4) - Lower
#304932

Gear differential internal gears precision made from new graphite composite mixture. Includes 2 bevel gears + 4 satellite gears.  



Alu Differential Outdrive Adapter - 7075 T6 (2)
#304970

CNC-machined diff outdrive adaptor made from tough 7075 T6 alu. Shafts are precision ground and polished for smooth operation. Hardcoated for extra durability and lifespan.  



Gear Differential Outdrive Adapter - HUDY Spring Steel™ (2)
#304971

CNC-machined diff outdrive adaptor made from tough HUDY Spring Steel™. Shafts are precision ground and polished for smooth operation. 



Composite Gear Diff Cross Pin
#304980

Gear differential cross pin made from tough composite material. 



Diff. Gasket (4)
#304990

Sealing gasket for differential housing.  



Alu Ball Differential 34T + 38T Pulley - 7075 T6 - Set
#305003

Alu ball-differential set for XRAY T2’008, T2'009, T3 made of special Swiss 7075 T6 alu components for high strength and durability. Diff with 34T and also 38T pulley for XRAY T2’008, T2'009, T3 cars. 



T2 008 Alu T6 Diff Long Output Shaft - Hard Coated
#305012

CNC-machined long output shaft for #305003/305004 T2’008 Alu Ball Differential, made from special Swiss 7075 T6 aluminum. Heat-treated and hardcoated. 



Alu T6 Diff Long Output Shaft - Hard Coated - Black
#305012-K

CNC-machined long output shaft for #305003/305004 Alu Ball Differential, made from special Swiss 7075 T6 aluminum. Heat-treated and hardcoated, black color. 



Alu T6 Diff Short Output Shaft - Hard Coated - Black
#305022-K

CNC-machined short output shaft for #305003/305004 Alu Ball Differential, made from special Swiss 7075 T6 aluminum. Heat-treated and hardcoated, black color. 



Screw For External Diff Adjustment
#305040

Special screw for external diff adjustment. Manufactured exclusively by HUDY from world-renowned top-secret "Hudy Spring Steel". 



Diff Pulley 34T with Covers
#305052

Spare 34T diff pulley and side plates for composite ball differential. 



Diff Pulley 34T with Labyrinth Dust Covers
#305054

Molded-composite 34T diff pulley with XRAY’s innovative yet very smart Labyrinth Dust Cover™ diff protection system which has been carried over from the previous T1/T2 platforms where it has been very successfully used for many years. For T2’008, T2'009, T3 US Foam-spec Edition ball differential. 



Diff Washer + Ball Steel 2.4mm ( 2+12 ) Set
#305080

Rebuild set for one XRAY differential includes two machined diff washers and 12 steel diff balls. 



Diff Washer 17x23x1 (2)
#305082

Two diff washers for ball-differentials. Each side of the washer has a distinct finish; a polished side against which the diff balls ride, and a rougher machined side that contacts the duraluminum diff output. Specially hardened to assure maximum life.  



XRAY Multi-Diff T2'008, T2'009, T3
#305104

The unique Multi-Diff™ caused a sensation in RC car racing when it was first introduced, and the updated version is no different. The Multi-Diff™ has 3 different settings. 



XRAY Multi-Differential T3 LiPo
#305105

The unique Multi-Diff™ caused a sensation in RC car racing when it was first introduced, and the updated version is no different. The Multi-Diff™ T3 LiPo has 3 different settings. 



Multi-Diff Main Axle T2'008, T2'009, T3
#305116

CNC-machined lightweight aluminum main axle includes factory-pressed (non-replaceable) high-quality German one-way bearings, hand-ground for maximum running precision and strength. Fits #305104 Multi-Diff™ for XRAY T2'008, T2'009, T3 only.  



Multi-Diff Locking Axle - Spring Steel
#305121

Multi-Diff™ locking axle is CNC-machined from Hudy Spring Steel™. Fits both #305102 and #305103 Multi-Diffs™ for all XRAY T1 cars. Must only be used with #305131 Inner Driveshaft Adapters. 



Inner Driveshaft Adapter 3.5mm - Spring Steel (2)
#305132

Precision-machined, specially-lightened outdrives for use with XRAY T2'008 Multi-Diff™ axle. Will fit only 3.5mm drive shaft replacement plastic caps (#305241). The new lightweight one-way outdrives have a hex hole machined at each end. Madefrom world-renowned HUDY Spring Steel™ for high strength and durability. Set of 2. 



Alu Solid Axle Driveshaft Adapters (2) - Hard Coated
#305136

CNC-machined diff drive shaft adapters for #305184/305188 XRAY Composite Solid Axle, made from premium lightweight Swiss 7075 T6 aluminum.  



Solid Axle Driveshaft Adapter - HUDY Spring Steel™ (2)
#305137

CNC-machined drive shaft adapters for #305184/305188 XRAY Composite Solid Axle, made from HUDY Spring Steel™. 



Timing Belt Pulley 34T for Multi-Diff
#305150

High-quality, lightened molded 34 teeth pulley with special "side click-covers" for front one-way differential. 



Timing Belt Pulley 38T for Multi-Diff
#305158

Molded-composite 38T pulley and side covers for #305104 XRAY Multi-Diff™ for T2’008, T2'009, T3 EU Rubber-spec Edition. The teeth number (38) is embossed into the side of the pulley for easy identification. 



Composite Solid Axle 34T - Set
#305184

Unique lightweight composite front solid axle 34T for XRAY T2’008, T2'009, T3 US Foam-spec Edition. The new composite solid axle has a very stiff structure and ultra-light weight that was achieved by injecting the entire solid axle from XRAY’s own self-designed & mixed lightweight composite material. 



ECS (ES) Drive Shaft 51mm for 2mm Pin - HUDY Spring Steel™
#305221

51mm extra-strong ECS drive shaft for 2mm pin made from world-renowned HUDY Spring Steel™.  



ECS (ES) Drive Shaft 50mm for 2mm Pin - HUDY Spring Steel™
#305223

50mm extra-strong ECS drive shaft for 2mm pin made from world-renowned HUDY Spring Steel™.  



ECS (ES) Drive Shaft 52mm for 2mm Pin - HUDY Spring Steel™
#305224

Extra-strong ECS drive shaft for 2mm pin made from world-renowned HUDY Spring Steel™.  



ECS Drive Shaft 50mm - HUDY Spring Steel™
#305225

CNC-machined 50mm ECS drive shaft made from world-renowned top-secret HUDY Spring Steel™. This race-quality drive shaft is a spare part for #305325 Equalized Corner Speed (ECS) Drive Shaft 50mm - Hudy Spring Steel™ (1), exclusively manufactured by HUDY.  



ECS Drive Shaft 50mm for 2mm Pin - HUDY Spring Steel™
#305226

CNC-machined 50mm ECS drive shaft made from world-renowned HUDY Spring Steel™.  



ECS Drive Shaft 52mm - HUDY Spring Steel™
#305227

CNC-machined 52mm ECS drive shaft made from world-renowned top-secret HUDY Spring Steel™. This race-quality drive shaft is a spare part for #305327 Equalized Corner Speed (ECS) Drive Shaft 52mm - Hudy Spring Steel™ (1), exclusively manufactured by HUDY. 



ECS Drive Shaft 52mm for 2mm Pin - HUDY Spring Steel™
#305228

CNC-machined 52mm ECS drive shaft made from world-renowned HUDY Spring Steel™.  



Composite Drive Shaft Replacement Cap 3.5mm - Orange - Strong (4)
#305242

Low-friction 3.5mm drive pin clips for protecting and cushioning drive shaft pin in diff outdrives.  



ECS Drive Shaft Case - Hudy Spring Steel™
#305250

ECS Drive Shaft Case made from HUDY Spring Steel™. Fits #305325 and #305327 ECS drive shafts. 



ECS Drive Shaft Coupling - Hudy Spring Steel™
#305251

Drive shaft coupling for ECS drive shafts of XRAY T2, made from top-secret, world-renowned HUDY Spring Steel™. Specially hand-ground for maximum precision.  



ECS Drive Shaft Case for 2mm Pin - HUDY Spring Steel™
#305252

ECS Drive Shaft Case made from HUDY Spring Steel™ fits #305330 and #305331 ECS drive shafts.  



ECS Drive Shaft Coupling for 2mm Pin - HUDY Spring Steel™
#305253

Drive shaft coupling for ECS drive shafts. Made from world-renowned HUDY Spring Steel™.  



ECS (ES) Drive Shaft Case for 2mm Pin - HUDY Spring Steel™
#305254

ECS Drive Shaft Case made from HUDY Spring Steel™ fits ECS (ES) drive shafts #305223 and #305224.  



Drive Shaft 50mm - Hudy Spring Steel™
#305323

CNC-machined 50mm drive shaft for XRAY T2,T3 made from world-renowned top-secret HUDY Spring Steel™. This race-quality drive shaft is the smallest in the world, exclusively manufactured by HUDY.  



Drive Shaft 52mm - Hudy Spring Steel™
#305324

CNC-machined 52mm CVD drive shaft made from world-renowned top-secret HUDY Spring Steel™. This race-quality drive shaft is the smallest in the world, exclusively manufactured by HUDY. Drive shaft diff end has been strategically lightened to reduce rotating mass without compromising strength.  



Equalized Corner Speed (ECS) Drive Shaft 50mm - Hudy Spring Steel™ (1)
#305325

XRAY proudly presents the new ECS drive shaft 50mm, designed with high-level racing in mind. The ECS drive shafts were developed to decrease front wheel vibration when racing with a solid front axle, thus providing a much smoother and quieter ride and increasing steering. 

Replaced by ECS Drive Shaft 50mm with 2mm Pins - HUDY Spring Steel™ - Set 



Equalized Corner Speed (ECS) Drive Shaft 52mm - Hudy Spring Steel™ (1)
#305327

XRAY proudly presents the new ECS drive shaft 52mm, designed with high-level racing in mind. The ECS drive shafts were developed to decrease front wheel vibration when racing with a solid front axle, thus providing a much smoother and quieter ride and increasing steering. 

Replaced by ECS Drive Shaft 52mm with 2mm Pins - HUDY Spring Steel™ - Set 



Alu Drive Shaft Swiss 7075 T6 - Hard Coated - 50mm
#305328

Super-lightweight 50mm alu drive shaft CNC-machined from premium Swiss 7075 T6 and hardcoated for extra durability and stylish looks. New design is up to 40% lighter than steel drive shaft. 



ECS Drive Shaft 52mm with 2mm Pins - HUDY Spring Steel™ - Set
#305330

52mm ECS drive shaft with new thicker and more reliable 2mm pins. 

Replaced by ECS ES (Extra Strong) Drive Shaft 52mm - HUDY Spring Steel™ 



ECS Drive Shaft 50mm with 2mm Pins - HUDY Spring Steel™ - Set
#305331

50mm ECS drive shaft with new thicker and more reliable 2mm pins.  

Replaced by ECS ES (Extra Strong) Drive Shaft 50mm - HUDY Spring Steel™ 



ECS ES (Extra Strong) Drive Shaft 52mm - HUDY Spring Steel™
#305332

New extra-strong ECS drive shafts. 52mm ECS set with new reinforced drive shaft, drive shaft case, and drive axle.  



ECS ES (Extra Strong) Drive Shaft 50mm - HUDY Spring Steel™
#305333

New extra-strong ECS drive shafts. 52mm ECS set with new reinforced drive shaft, drive shaft case, and drive axle. 



ECS ES (Extra Strong) Drive Shaft 51mm - HUDY Spring Steel™
#305334

Extra strong ECS drive shafts 51mm long for optimized steering and stability.  



Drive Axle - Lightweight - Hudy Spring Steel™
#305341

Super-lightweight drive axle for XRAY T2, T3 CNC-machined from world-renowned, top-secret HUDY Spring Steel™. Reduces rotating weight by up to 35% over standard outdrive. 



T4F Drive Axle - HUDY Spring Steel™
#305342

CNC-machined drive axle for XRAY T4F made from world-renowned HUDY Spring Steel™. 



ECS Drive Axle for 2mm Pin - HUDY Spring Steel™
#305346

CNC-machined drive axle for ECS drive shafts, made from world-renowned HUDY Spring Steel™. Fits #305330 and #305331 ECS drive shafts.  



Alu Wheel Hub (2)
#305350

CNC-machined clamping-style alu wheel hubs for XRAY T2, T3. Set of two. 

Replaced by Alu Wheel Hub - Black (2) 



Alu Wheel Hub - Black (2)
#305350-K

CNC-machined clamping-style alu wheel hubs for XRAY T2, T3. Set of two. Black colour. 



Alu Wheel Hub - Offset -0.75mm (2)
#305351

CNC-machined clamping-style alu wheel hub for T2, T3 features -0.75mm offset to give more narrow track-width. Set of 2. 



Alu Wheel Hub - Offset +0.75mm (2)
#305352

CNC-machined clamping-style alu wheel hub for T2, T3 features 0.75mm offset to give wider track-width. Black color. Set of 2. 



Alu Wheel Hub - Offset +1.5mm (2)
#305353

CNC-machined clamping-style alu wheel hub for T2, T3 features 1.5mm offset to give wider track-width. Set of 2 includes clamping screws. 



Alu Wheel Shim Offset 0.75mm (2)
#305380

Alu wheel shim with 0.75mm offset. Set of 2. Fits T2, T3. 



ECS Drive Shaft Pin 1.5 x 8.5 - V3 (2)
#305390

Polished chrome pin for ECS drive shaft, 1.5 x 8.5mm. Specially hand-ground for maximum precision. To help prevent of loosening of the setscrew from the ECS shaft, XRAY recommends using these new pins with flat spots. The flat spots allow the setscrew to better settle into the coupling. Set of 2. 



ECS Drive Shaft Pin 1.5 x 9 (2)
#305391

Polished chrome pin for ECS drive shaft, 1.5 x 9mm. Specially hand-ground for maximum precision. To help prevent of loosening of the setscrew from the ECS shaft, XRAY recommends using these new pins with flat spots. The flat spots allow the setscrew to better settle into the coupling. Set of 2. 



Drive Shaft Pin 2x10 with Flat Spot (2)
#305392

Polished chrome pin for CVD drive shaft, 2 x 10mm. Specially hand-ground for maximum precision. 



High-Performance Drive Belt Front 3x507mm
#305431

Ultra-Flex High-Performance Drive Belt
For top competition racing XRAY offers these specially modified high-performance drive belts. The belts are very thin and elastic as possible to create much more effective transmissions, save batteries and eliminate friction. The belt is specially modified - hand ground on a special machine so the belt is as thin as possible, but in such a way that it will still have long life.
"A must have item for serious racers."  



High-Performance Drive Belt Front 3x513mm
#305432

Specially-modified high-performance 513mm-long and 3mm-wide front drive belt comes standard in XRAY T2’009 Rubber-Spec Conversion Set - 38T Pulley. 



High-Performance Drive Belt Rear 3x183mm
#305444

Specially-modified high-performance 183mm-long and 3mm-wide rear drive belt comes standard in XRAY T2’008 EU Rubber-spec Edition. 



High-Performance Drive Belt Rear 3x189mm
#305446

Specially-modified high-performance 189mm-long and 3mm-wide rear drive belt comes standard in XRAY T2’009 Rubber-Spec Conversion Set – 38T Pulley. 



Alu Solid Layshaft - Black
#305521-K

Alu middle layshaft for T2’009, T3 has been strategically CNC-machined to minimize rotating weight without compromising strength or integrity. Black colour. 



Alu Solid Layshaft - Orange
#305521-O

Alu middle layshaft for T2’009, T3 has been strategically CNC-machined to minimize rotating weight without compromising strength or integrity. The hollow layshaft is perfectly round with zero runout, eliminating drivetrain vibration and producing a positive balance. The perfectly flat spur gear mounting surface reduces gear wobble. Orange colour. 

Replaced by Alu Solid Layshaft - Black 



Composite Fixed Pulley 20T - Low Friction - Graphite (2)
#305577-O

Precision-molded 20T layshaft pulley made of specially-formulated graphite composite material that is a perfect balance of reliability and performance.  



Pinion Gear Steel 21T/48
#305621

High-performance 21 tooth, 48 pitch pinion gear.
Manufactured from special steel, this high-performance pinion gear is made by XRAY. 

Replaced by Narrow Pinion Gear Alu Hard Coated 21T/48 



Pinion Gear Steel 23T/48
#305623

High-performance 23 tooth, 48 pitch pinion gear.
Manufactured from special steel, this high-performance pinion gear is made by XRAY. 

Replaced by Narrow Pinion Gear Alu Hard Coated 23T/48 



Pinion Gear Steel 24T/48
#305624

High-performance 24 tooth, 48 pitch pinion gear.
Manufactured from special steel, this high-performance pinion gear is made by XRAY. 

Replaced by Narrow Pinion Gear Alu Hard Coated 24T/48 



Pinion Gear Steel 27T/48
#305627

High-performance 27 tooth, 48 pitch pinion gear.
Manufactured from special steel, this high-performance pinion gear is made by XRAY. 

Replaced by Narrow Pinion Gear Alu Hard Coated 27T/48 



Pinion Gear Steel 29T/48
#305629

High-performance 29 tooth, 48 pitch pinion gear.
Manufactured from special steel, this high-performance pinion gear is made by XRAY. 

Replaced by Narrow Pinion Gear Alu Hard Coated 29T/48 



Pinion Gear Steel 30T/48
#305630

High-performance 30 tooth, 48 pitch pinion gear.
Manufactured from special steel, this high-performance pinion gear is made by XRAY. 

Replaced by Narrow Pinion Gear Alu Hard Coated 30T/48 



Pinion Gear Steel 31T/48
#305631

High-performance 31 tooth, 48 pitch pinion gear.
Manufactured from special steel, this high-performance pinion gear is made by XRAY. 

Replaced by Narrow Pinion Gear Alu Hard Coated 31T/48 



Pinion Gear Steel 32T/48
#305632

High-performance 32 tooth, 48 pitch pinion gear.
Manufactured from special steel, this high-performance pinion gear is made by XRAY. 

Replaced by Narrow Pinion Gear Alu Hard Coated 32T/48 



Pinion Gear Steel 33T/48
#305633

High-performance 33 tooth, 48 pitch pinion gear.
Manufactured from special steel, this high-performance pinion gear is made by XRAY. 

Replaced by Narrow Pinion Gear Alu Hard Coated 33T/48 



Pinion Gear Steel 34T/48
#305634

High-performance 34 tooth, 48 pitch pinion gear.
Manufactured from special steel, this high-performance pinion gear is made by XRAY. 

Replaced by Narrow Pinion Gear Alu Hard Coated 34T/48 



Pinion Gear Alu Hard Coated 17T / 48
#305717

High-performance 17T / 48 pinion gear
Manufactured from special lightweight aircraft duraluminum to have lowest weight. Made by XRAY on a specially modified precision gear machine, which has ultra-precise tolerances and assures unparalleled concentricity. All edges are chamfered and pinions are run-in, afterwards specially treated to give them an even hardcoat so they stay absolute true for a long time.
 

Replaced by Narrow Pinion Gear Alu Hard Coated 17T/48 



Pinion Gear Alu Hard Coated 18T / 48
#305718

High-performance 20T / 48 pinion gear
Manufactured from special lightweight aircraft duraluminum to have lowest weight. Made by XRAY on a specially modified precision gear machine, which has ultra-precise tolerances and assures unparalleled concentricity. All edges are chamfered and pinions are run-in, afterwards specially treated to give them an even hardcoat so they stay absolute true for a long time.  

Replaced by Narrow Pinion Gear Alu Hard Coated 18T/48 



Pinion Gear Alu Hard Coated 20T / 48
#305720

High-performance 20T / 48 pinion gear
Manufactured from special lightweight aircraft duraluminum to have lowest weight. Made by XRAY on a specially modified precision gear machine, which has ultra-precise tolerances and assures unparalleled concentricity. All edges are chamfered and pinions are run-in, afterwards specially treated to give them an even hardcoat so they stay absolute true for a long time.  

Replaced by Narrow Pinion Gear Alu Hard Coated 20T/48 



Pinion Gear Alu Hard Coated 22T / 48
#305722

High-performance 22T / 48 pinion gear
Manufactured from special lightweight aircraft duraluminum to have lowest weight. Made by XRAY on a specially modified precision gear machine, which has ultra-precise tolerances and assures unparalleled concentricity. All edges are chamfered and pinions are run-in, afterwards specially treated to give them an even hardcoat so they stay absolute true for a long time.  

Replaced by Narrow Pinion Gear Alu Hard Coated 22T/48 



Pinion Gear Alu Hard Coated 23T / 48
#305723

High-performance 23T / 48 pinion gear
Manufactured from special lightweight aircraft duraluminum to have lowest weight. Made by XRAY on a specially modified precision gear machine, which has ultra-precise tolerances and assures unparalleled concentricity. All edges are chamfered and pinions are run-in, afterwards specially treated to give them an even hardcoat so they stay absolute true for a long time.  

Replaced by Narrow Pinion Gear Alu Hard Coated 23T/48 



Pinion Gear Alu Hard Coated 24T / 48
#305724

High-performance 24T / 48 pinion gear
Manufactured from special lightweight aircraft duraluminum to have lowest weight. Made by XRAY on a specially modified precision gear machine, which has ultra-precise tolerances and assures unparalleled concentricity. All edges are chamfered and pinions are run-in, afterwards specially treated to give them an even hardcoat so they stay absolute true for a long time.  

Replaced by Narrow Pinion Gear Alu Hard Coated 24T/48 



Pinion Gear Alu Hard Coated 29T / 48
#305729

High-performance 29T / 48 pinion gear
Manufactured from special lightweight aircraft duraluminum to have lowest weight. Made by XRAY on a specially modified precision gear machine, which has ultra-precise tolerances and assures unparalleled concentricity. All edges are chamfered and pinions are run-in, afterwards specially treated to give them an even hardcoat so they stay absolute true for a long time.  

Replaced by Narrow Pinion Gear Alu Hard Coated 29T/48 



Pinion Gear Alu Hard Coated 30T / 48
#305730

High-performance 30T / 48 pinion gear
Manufactured from special lightweight aircraft duraluminum to have lowest weight. Made by XRAY on a specially modified precision gear machine, which has ultra-precise tolerances and assures unparalleled concentricity. All edges are chamfered and pinions are run-in, afterwards specially treated to give them an even hardcoat so they stay absolute true for a long time.  

Replaced by Narrow Pinion Gear Alu Hard Coated 30T/48 



Pinion Gear Alu Hard Coated 31T / 48
#305731

High-performance 31T / 48 pinion gear
Manufactured from special lightweight aircraft duraluminum to have lowest weight. Made by XRAY on a specially modified precision gear machine, which has ultra-precise tolerances and assures unparalleled concentricity. All edges are chamfered and pinions are run-in, afterwards specially treated to give them an even hardcoat so they stay absolute true for a long time.  

Replaced by Narrow Pinion Gear Alu Hard Coated 31T/48 



Composite Offset Spur Gear 72T / 48
#305772

XRAY precision-molded offset spur gear 72T 48P, strategically lightened to reduce rotating mass. 



Composite Offset Spur Gear 76T / 48
#305776

XRAY precision-molded offset spur gear 76T 48P, strategically lightened to reduce rotating mass. 



Offset Spur Gear 78T/48
#305778

XRAY precision molded offset spur gear 78 tooth, 48 pitch. This spur gear has been strategically lightened to reduce rotating mass. 



Composite Offset Spur Gear 79T / 48
#305779

XRAY precision-molded offset spur gear 79T 48P, strategically lightened to reduce rotating mass. 



Offset Spur Gear 81T/48
#305781

XRAY precision molded offset spur gear 81 tooth, 48 pitch. This spur gear has been strategically lightened to reduce rotating mass. 



Composite Spur Gear H 84T / 48 - Orange
#305784-O

XRAY precision molded spur gear 84 tooth, 48 pitch. 



Spur Gear 87T/48
#305787

XRAY precision molded spur gear 87 tooth, 48 pitch. This spur gear has been strategically lightened to reduce rotating mass. 



Composite Offset Spur Gear 90T / 64
#305860

XRAY precision molded offset spur gear 90 tooth, 64 pitch 



Composite Offset Spur Gear 92T / 64
#305862

XRAY presents new additions to the range of precision-molded 64-pitch offset spur gears made from special hard composite material, strategically lightened to reduce rotating mass without compromising strength or durability. 



Composite Offset Spur Gear 96T / 64
#305866

XRAY presents new additions to the range of precision-molded 64-pitch offset spur gears made from special hard composite material, strategically lightened to reduce rotating mass without compromising strength or durability. 



Composite Offset Spur Gear 96T / 64 - Orange
#305866-O

XRAY precision molded offset spur gear 96 tooth, 64 pitch. 



Composite Offset Spur Gear 99T / 64
#305869

Addition to the range of precision-molded 64-pitch offset spur gears made from special hard composite material, strategically lightened to reduce rotating mass without compromising strength or durability. 



Composite Offset Spur Gear 100T / 64
#305870

XRAY presents new additions to the range of precision-molded 64-pitch offset spur gears made from special hard composite material, strategically lightened to reduce rotating mass without compromising strength or durability. 



Composite Offset Spur Gear 100T / 64 - Orange
#305870-O

XRAY precision molded offset spur gear 100 tooth, 64 pitch. 



Offset Spur Gear 104T/64
#305874

XRAY precision molded offset spur gear 104 tooth, 64 pitch. This spur gear has been strategically lightened to reduce rotating mass. 



Offset Spur Gear 106T/64
#305876

XRAY precision molded offset spur gear 106 tooth, 64 pitch. This spur gear has been strategically lightened to reduce rotating mass. 



Offset Spur Gear 108T/64
#305878

XRAY precision molded offset spur gear 108 tooth, 64 pitch. This spur gear has been strategically lightened to reduce rotating mass. 



Offset Spur Gear 110T/64
#305880

XRAY precision molded offset spur gear 110 tooth, 64 pitch. This spur gear has been strategically lightened to reduce rotating mass. 



Composite Offset Spur Gear 110T / 64 - Orange
#305880-O

XRAY precision molded offset spur gear 110 tooth, 64 pitch. 



Offset Spur Gear 112T/64
#305882

XRAY precision molded offset spur gear 112 tooth, 64 pitch. This spur gear has been strategically lightened to reduce rotating mass. 



Offset Spur Gear 114T/64
#305884

XRAY precision molded offset spur gear 114 tooth, 64 pitch. This spur gear has been strategically lightened to reduce rotating mass. 



Offset Spur Gear 116T/64
#305886

XRAY precision molded offset spur gear 116 tooth, 64 pitch. This spur gear has been strategically lightened to reduce rotating mass. 



Offset Spur Gear 118T/64
#305888

XRAY precision molded offset spur gear 118 tooth, 64 pitch. This spur gear has been strategically lightened to reduce rotating mass. 



Narrow Pinion Gear Alu Hard Coated 12T/48
#305912

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 



Narrow Pinion Gear Alu Hard Coated 13T/48
#305913

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 



Narrow Pinion Gear Alu Hard Coated 14T/48
#305914

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 



Narrow Pinion Gear Alu Hard Coated 15T/48
#305915

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 



Narrow Pinion Gear Alu Hard Coated 16T/48
#305916

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 



Narrow Pinion Gear Alu Hard Coated 17T/48
#305917

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 



Narrow Pinion Gear Alu Hard Coated 18T/48
#305918

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 



Narrow Pinion Gear Alu Hard Coated 19T/48
#305919

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 



Narrow Pinion Gear Alu Hard Coated 20T/48
#305920

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 



Narrow Pinion Gear Alu Hard Coated 21T/48
#305921

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 



Narrow Pinion Gear Alu Hard Coated 22T/48
#305922

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 



Narrow Pinion Gear Alu Hard Coated 23T/48
#305923

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 



Narrow Pinion Gear Alu Hard Coated 24T/48
#305924

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 



Narrow Pinion Gear Alu Hard Coated 25T/48
#305925

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 



Narrow Pinion Gear Alu Hard Coated 26T/48
#305926

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 



Narrow Pinion Gear Alu Hard Coated 27T/48
#305927

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 



Narrow Pinion Gear Alu Hard Coated 28T/48
#305928

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 



Narrow Pinion Gear Alu Hard Coated 29T/48
#305929

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 



Narrow Pinion Gear Alu Hard Coated 30T/48
#305930

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 



Narrow Pinion Gear Alu Hard Coated 31T/48
#305931

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 



Narrow Pinion Gear Alu Hard Coated 32T/48
#305932

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 



Narrow Pinion Gear Alu Hard Coated 33T/48
#305933

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 



Narrow Pinion Gear Alu Hard Coated 34T/48
#305934

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 



Narrow Pinion Gear Alu Hard Coated 18T/64
#305968

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 



Narrow Pinion Gear Alu Hard Coated 19T/64
#305969

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 



Narrow Pinion Gear Alu Hard Coated 20T/64
#305970

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 



Narrow Pinion Gear Alu Hard Coated 21T/64
#305971

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 



Narrow Pinion Gear Alu Hard Coated 22T/64
#305972

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 



Narrow Pinion Gear Alu Hard Coated 23T/64
#305973

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 



Narrow Pinion Gear Alu Hard Coated 24T/64
#305974

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 



Narrow Pinion Gear Alu Hard Coated 25T/64
#305975

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 



Narrow Pinion Gear Alu Hard Coated 26T/64
#305976

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 



Narrow Pinion Gear Alu Hard Coated 27T/64
#305977

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 



Narrow Pinion Gear Alu Hard Coated 28T/64
#305978

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 



Narrow Pinion Gear Alu Hard Coated 29T/64
#305979

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 



Narrow Pinion Gear Alu Hard Coated 30T/64
#305980

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 



Narrow Pinion Gear Alu Hard Coated 31T/64
#305981

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 



Narrow Pinion Gear Alu Hard Coated 32T/64
#305982

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 



Narrow Pinion Gear Alu Hard Coated 33T/64
#305983

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 



Narrow Pinion Gear Alu Hard Coated 34T/64
#305984

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 



Narrow Pinion Gear Alu Hard Coated 35T/64
#305985

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 



Narrow Pinion Gear Alu Hard Coated 36T/64
#305986

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 



Narrow Pinion Gear Alu Hard Coated 37T/64
#305987

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 



Narrow Pinion Gear Alu Hard Coated 38T/64
#305988

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 



Alu Narrow Pinion Gear - Hard Coated 39T / 64
#305989

These narrow pinions are manufactured by XRAY on a specially-modified precision gear machine for ultra-precise tolerances and unparalleled concentricity.  



Narrow Pinion Gear Alu Hard Coated 40T/64
#305990

These narrow pinions are manufactured by XRAY on a specially-modified precision gear machine which has ultra-precise tolerances and assures unparalleled concentricity. After machining, the edges of pinions are chamfered and then the pinions are run in. The pinions are then specially treated to give them an even hardcoating so they stay absolutely true for a long time.  



Narrow Pinion Gear Alu Hard Coated 42T/64
#305992

These narrow pinions are manufactured by XRAY on a specially-modified precision gear machine which has ultra-precise tolerances and assures unparalleled concentricity. After machining, the edges of pinions are chamfered and then the pinions are run in. The pinions are then specially treated to give them an even hardcoating so they stay absolutely true for a long time.  



Alu Narrow Pinion Gear - Hard Coated 43T / 64
#305993

These narrow pinions are manufactured by XRAY on a specially-modified precision gear machine for ultra-precise tolerances and unparalleled concentricity.  



Narrow Pinion Gear Alu Hard Coated 44T/64
#305994

These narrow pinions are manufactured by XRAY on a specially-modified precision gear machine which has ultra-precise tolerances and assures unparalleled concentricity. After machining, the edges of pinions are chamfered and then the pinions are run in. The pinions are then specially treated to give them an even hardcoating so they stay absolutely true for a long time.  



Narrow Pinion Gear Alu Hard Coated 46T/64
#305996

These narrow pinions are manufactured by XRAY on a specially-modified precision gear machine which has ultra-precise tolerances and assures unparalleled concentricity. After machining, the edges of pinions are chamfered and then the pinions are run in. The pinions are then specially treated to give them an even hardcoating so they stay absolutely true for a long time. v 



Alu Narrow Pinion Gear - Hard Coated 47T / 64
#305997

These narrow pinions are manufactured by XRAY on a specially-modified precision gear machine for ultra-precise tolerances and unparalleled concentricity.  



Narrow Pinion Gear Alu Hard Coated 48T/64
#305998

These narrow pinions are manufactured by XRAY on a specially-modified precision gear machine which has ultra-precise tolerances and assures unparalleled concentricity. After machining, the edges of pinions are chamfered and then the pinions are run in. The pinions are then specially treated to give them an even hardcoating so they stay absolutely true for a long time.  



Narrow Pinion Gear Alu Hard Coated 50T/64
#306000

These narrow pinions are manufactured by XRAY on a specially-modified precision gear machine which has ultra-precise tolerances and assures unparalleled concentricity. After machining, the edges of pinions are chamfered and then the pinions are run in. The pinions are then specially treated to give them an even hardcoating so they stay absolutely true for a long time.  



6-Cell Graphite Battery Strap w/ Alu Stands (Set)
#306163

Pre-assembled 6-cell graphite battery strap for XRAY T2, T3 features the XRAY smart battery holder system and new battery tweak-free mounting system. The alu capture wheel enables you to easily close and secure the battery strap without any clips.  



Graphite Battery Strap for LiPo/NiMH - Black - Set
#306163-K

Pre-assembled 6-cell graphite battery strap for XRAY T2, T3 features the XRAY smart battery holder system and new battery tweak-free mounting system. The alu capture wheel enables you to easily close and secure the battery strap without any clips. Black color. 



Alu Servo Mount (2)
#306200

Alu mounts, CNC-machined, for mounting steering servo. Set of two. 



T3 Alu Low Top Deck Mount - Black (2)
#306515-K

CNC-machined alu stands for connecting top deck and chassis, increases torsional stiffness. Black color. Set of 2. Fits XRAY T3 only; not for use on T2 cars. 



Titan Front Arm Pivot Pin (2)
#307222

Titanium front lower outer pivot pins, ultra-precision hand ground for high durability and long life.  



Titan Rear Arm Pivot Pin (2)
#307322

Titanium rear lower outer pivot pins, ultra-precision hand ground for high durability and long life.  



Alu Shock Spring Retaining Collar (4)
#308031

Aluminum CNC-machined shock collars that can be used on the XRAY shock absorbers to increase the durability. Stylish and lightweight collars are CNC-machined from premium Swiss 7075 T6 aluminum and are strategically lightened. 



Alu XRAY Shock Spring Retaining Collar - Black (4)
#308031-K

Aluminum shock collars for use on XRAY shock absorbers to increase durability.  



Alu XRAY Shock Spring Retaining Collar - Orange (4)
#308031-O

Aluminum CNC-machined shock collars that can be used on the XRAY shock absorbers to increase the durability. Stylish and lightweight collars are CNC-machined from premium Swiss 7075 T6 aluminum and are strategically lightened. Set of four. Orange color. 



Composite Non-Adjustable Pistons - V3
#308036

Set of composite molded shock pistons for 2 shock absorbers. Includes pistons with 2 holes and 3 holes. Each piston type is available with three different-sized holes for damping adjustment: 1.1mm, 1.2mm, and 1.3mm holes (2 per piston). 



Shock Adj. Nut Alu + O-ring - Orange
#308040-O

Set of four alu. spring-tension adjusting nuts and four O-rings to be inserted in them. O-rings prevent adjusting nuts from coming loose. Orange colour. 



Shock Absorber Membranes - Low
#308081

Silicon-rubber compensation membranes for shock absorbers. All-new low-profile shock membranes allow for easier shock rebound adjustment. 



Shock Foam Insert - Low (4)
#308091

Foam inserts for XRAY shocks, go between shock upper mount and rubber membrane. All-new low-profile shock foam inserts allow for easier shock rebound adjustment. 



XRAY Shock Absorber-Set 4-Step - Short - Orange (2)
#308302-O

Set of parts to make two (2) complete XRAY shock absorbers (front or rear) for the XRAY T2’009, T3. The T2’009, T3 feature shorter, race-proven, externally-adjustable racing shocks. The new shorter shock body and shock shaft were designed for improved suspension lift and lower CG. Orange colour. 



Alu XRAY Shock Body For #308306 (2)
#308322

Machined hardcoated alu shock bodies for #308306 XRAY Alu Shock Absorber -Set. Set of 2. 



Composite Shock Parts - Rebound Hole - Short
#308332

One frame containing composite parts (except pistons) for two XRAY short shock absorbers. These new shock parts feature the upper shock cap with a hole which allows for faster, easier and more comfortable shocks rebound adjustment. Fits all XRAY electric and nitro touring shocks. 



Alu Shock Cap-Nut with Vent Hole - Orange(2)
#308352-O

Machined alu upper shock cap for XRAY Shock Absorber-Set 4-Step. Set of 2. Orange colour. 



Hardened Shock Shaft for Alu Shock (2)
#308363

Hardened, high-strength shock shafts for use with #308306 XRAY Alu Shock Absorbers. Polished for super-smooth operation. Set of 2. 



XRAY Spring-Set C = 2.2 (2)
#308373

New ultimate-match shock springs (C = 2.2) for XRAY T2 shocks. Stylish black finish. Laser-engraved value (2.2) on top spring coil for easy identification. Set of 2. 



XRAY Spring-Set C = 2.4 (2)
#308374

New ultimate-match shock springs (C = 2.4) for XRAY T2 shocks. Stylish black finish. Laser-engraved value (2.4) on top spring coil for easy identification. Set of 2. 



XRAY Spring-Set C = 2.6 (2)
#308375

New ultimate-match shock springs (C = 2.6) for XRAY T2 shocks. Stylish black finish. Laser-engraved value (2.6) on top spring coil for easy identification. Set of 2. 



XRAY Spring-Set C = 2.8 (2)
#308376

New ultimate-match shock springs (C = 2.8) for XRAY T2 shocks. Stylish black finish. Laser-engraved value (2.8) on top spring coil for easy identification. Set of 2. 



XRAY Spring-Set C = 3.0 (2)
#308377

New ultimate-match shock springs (C = 3.0) for XRAY T2 shocks. Stylish black finish. Laser-engraved value (3.0) on top spring coil for easy identification. Set of 2. 



XRAY Spring-Set C = 3.2 (2)
#308378

New ultimate-match shock springs (C = 3.2) for XRAY T2 shocks. Stylish black finish. Laser-engraved value (3.2) on top spring coil for easy identification. Set of 2. 



XRAY Spring-Set C = 3.4 (2)
#308379

New ultimate-match shock springs (C = 3.4) for XRAY T2 shocks. Stylish black finish. Laser-engraved value (3.4) on top spring coil for easy identification. Set of 2. 



Additional XRAY Ultimate Racing Springs (20)
#308380

For even more fine tuning of suspension dampening, XRAY offers an additional set of ultra-fine tuning springs in addition to the basic set (#308390) of XRAY springs. The ultra-fine tuning springs have different damping and compression characteristics that fall between the range of the springs in the basic set.  



XRAY Spring-Set D=1.5 (15 LB) Blue-Green (4)
#308384

For even more fine tuning of suspension dampening, XRAY offers an additional ultra-fine tuning springs in addition to the basic XRAY springs. The ultra-fine tuning springs have different damping and compression characteristics that fall between the range of the basic springs. All 4 springs within the set have the same length and damping characteristics. 



XRAY Spring-Set D=1.6 (20 LB) Light-Blue (4)
#308385

For even more fine tuning of suspension dampening, XRAY offers an additional ultra-fine tuning springs in addition to the basic XRAY springs. The ultra-fine tuning springs have different damping and compression characteristics that fall between the range of the basic springs. All 4 springs within the set have the same length and damping characteristics. 



XRAY Spring-Set D=1.7 (25 LB) Dark-Blue (4)
#308386

For even more fine tuning of suspension dampening, XRAY offers an additional ultra-fine tuning springs in addition to the basic XRAY springs. The ultra-fine tuning springs have different damping and compression characteristics that fall between the range of the basic springs. All 4 springs within the set have the same length and damping characteristics. 



XRAY Spring-Set D=1.8 (30 LB) C=4.5 (4)
#308387

For even more fine tuning of suspension dampening, XRAY offers an additional ultra-fine tuning springs in addition to the basic XRAY springs. The ultra-fine tuning springs have different damping and compression characteristics that fall between the range of the basic springs. All 4 springs within the set have the same length and damping characteristics. 



XRAY Spring-Set D=1.9 (35 LB) Light-Red (4)
#308388

For even more fine tuning of suspension dampening, XRAY offers an additional ultra-fine tuning springs in addition to the basic XRAY springs. The ultra-fine tuning springs have different damping and compression characteristics that fall between the range of the basic springs. All 4 springs within the set have the same length and damping characteristics. 



XRAY Selected Ultimate Racing Springs (24)
#308390

Ultimate high-performance racing springs, which provide precision tuning for your XRAY model racing car! Developed from extensive testing and racing experience, these racing springs were designed and precision-crafted to have a unique spring characteristic. The XRAY spring sets were designed to give you an optimum range of choices to fine tune your car.  



XRAY Spring-Set D=1.4 (14 LB) Yellow - Super Soft (4)
#308393

Set of four coil-springs for XRAY shock absorbers. All 4 springs within the set have the same length and damping characteristics.

Colour: Yellow
Tension: Very Soft

NOT interchangeable with yellow springs for Serpent shocks - 308096 Spring-set D=1.6 Yellow (2+2)
 



XRAY Spring-Set D=1.5 (17.5 LB) White - Soft (4)
#308394

Set of four coil-springs for XRAY shock absorbers. All 4 springs within the set have the same length and damping characteristics.

Colour: White
Tension: Soft

NOT interchangeable with yellow springs for Serpent shocks - 308095 Spring-set D=1.5 White (2+2)
 



XRAY Spring-Set D=1.6 (22.5 LB) Blue - Soft-Medium (4)
#308395

Set of four coil-springs for XRAY shock absorbers. All 4 springs within the set have the same length and damping characteristics.

Colour: Blue
Tension: Soft-Medium
 



XRAY Spring-Set D=1.7 (28 LB) Violet - Medium (4)
#308396

Set of four coil-springs for XRAY shock absorbers. All 4 springs within the set have the same length and damping characteristics.

Colour: Violet
Tension: Medium
 



XRAY Spring-Set D=1.8 (33 LB) Purple - Medium-Hard (4)
#308397

Set of four coil-springs for XRAY shock absorbers. All 4 springs within the set have the same length and damping characteristics.

Colour: Purple
Tension: Medium-Hard

NOT interchangeable with purple springs for Serpent shocks - 308093 Spring-set D=1.3 Purple (2+2)
 

Replaced by Spring-Set C=5.0 - Rear (2) 



XRAY Spring-Set D=1.9 (38 LB) Red - Hard (4)
#308398

Set of four coil-springs for XRAY shock absorbers. All 4 springs within the set have the same length and damping characteristics.

Colour: Red
Tension: Hard
 



Set of Ceramic Ball-Bearings (14)
#309002

Set of 14 high-performance ceramic ball-bearings for XRAY touring cars. Set of 5x10x4 bearings (10pcs) and 10x15x4 bearings (4pcs). 



Silicone Grease 00
#309500

Super differential silicone lube in a resealable syringe. This is the best Ball Differential lubricant combined with the easiest applicator on the market. 



Silicone Oil 20W
#309520

Specially developed silicone shock oil, temperature resistant, low foaming formula. Advised to use in XRAY and any other shock absorbers. 

Replaced by XRAY Premium Silicone Oil 100 cSt 



Tires XXT-M W/O Belt for Low Grip Asphalt (2)
#309612

Rubber tires specially developed for low-grip asphalt. Fits most popular sizes of wheels and inserts. Set of 2.  



Tires XXT-M for Asphalt (2)
#309617

Rubber tires specially developed for medium & high-grip asphalt. Fits most popular sizes of wheels and inserts. Set of 2. 



Body Alfa 156 Ver. 2.0 + Accessories (Protoform)
#309710

Alfa 156 (ver 2.0) body made from high-strength Lexan® fits 1:10th scale electric touring cars such as the XRAY T4. Includes window mask, add-on wing, and mounting hardware. 



Body Stratus 2.0 + Accessories (Protoform)
#309720

Stratus (ver 2.0) body made from high-strength Lexan® fits 1:10th scale electric touring cars such as the XRAY T4. Includes window mask, add-on wing, and mounting hardware. 



Precision Balancing Chassis Weights (4 pcs.)
#309840

A complete set of 4 chassis balancing weights (2x 5g + 2x 10g) and mounting hardware. Designed for XRAY electric & nitro touring car to be mounted at pre-drilled chassis holes; also fits other race cars as well. Made from steel and laser engraved with the weight value for easy identification. 



Balancing Chassis Weights (Center - 3 pcs)
#309850

Precision chassis weights
A complete set of 3 chassis balancing weights and mounting hardware. Designed for XRAY T1 to be mount at the pre-drilled holes at the center of the chassis but fits any other race car as well. Made from brass.  



XRAY Aluminum 1/10 Touring Set-Up Board - Limited Edition
#309901

Unique flat set-up board for 1/10 electric & nitro touring cars with stylish, full-colour XRAY graphics screen printed with your name and country flag.  



Spring-Set C=3.6 - Soft-Medium Hard - Rear (2)
#338286

XRAY rear spring set for NT1. Different spring tensions to fine tune your car. Powder-coated for easy identification. Developed from extensive testing and racing experience, these racing shock springs were designed and precision-crafted to have a unique spring characteristic. Set of 2 springs. 



Spring-Set C=4.5 - Medium-Medium Hard - Rear (2)
#338287

XRAY rear spring set for NT1. Different spring tensions to fine tune your car. Powder-coated for easy identification. Developed from extensive testing and racing experience, these racing shock springs were designed and precision-crafted to have a unique spring characteristic. Set of 2 springs. 



XRAY Springs - Set D=1.9 (35 LB) Light Red - Hard - Rear (2)
#338288

XRAY rear spring set for NT1. Different spring tensions to fine tune your car. Powder-coated for easy identification. Developed from extensive testing and racing experience, these racing shock springs were designed and precision-crafted to have a unique spring characteristic. Set of 2 springs. 



XRAY Springs - Set C=4.0 - Medium - Rear (2)
#338296

XRAY rear spring set for NT1. Different spring tensions to fine tune your car. Powder-coated for easy identification. Developed from extensive testing and racing experience, these racing shock springs were designed and precision-crafted to have a unique spring characteristic. Set of 2 springs. 



XRAY Springs - Set C=5.0 - Medium-Hard - Rear (2)
#338297

XRAY rear spring set for NT1. Different spring tensions to fine tune your car. Powder-coated for easy identification. Developed from extensive testing and racing experience, these racing shock springs were designed and precision-crafted to have a unique spring characteristic. Set of 2 springs. 



XRAY Premium Silicone Oil 100 cSt
#359210

XRAY Premium Silicone Oil 100 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 



XRAY Premium Silicone Oil 150 cSt
#359215

XRAY Premium Silicone Oil 150 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 



XRAY Premium Silicone Oil 200 cSt
#359220

XRAY Premium Silicone Oil 200 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 



XRAY Premium Silicone Oil 250 cSt
#359225

XRAY Premium Silicone Oil 250 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 



XRAY Premium Silicone Oil 300 cSt
#359230

XRAY Premium Silicone Oil 300 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 



XRAY Premium Silicone Oil 400 cSt
#359240

XRAY Premium Silicone Oil 400 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 



XRAY Premium Silicone Oil 450 cSt
#359245

XRAY Premium Silicone Oil 450 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 



XRAY Premium Silicone Oil 500 cSt
#359250

XRAY Premium Silicone Oil 500 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 



XRAY Premium Silicone Oil 550 cSt
#359255

XRAY Premium Silicone Oil 550 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 



XRAY Premium Silicone Oil 600 cSt
#359260

XRAY Premium Silicone Oil 600 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 



XRAY Premium Silicone Oil 700 cSt
#359270

XRAY Premium Silicone Oil 700 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 



Ball End 4.9mm with 4mm Thread (2)
#362648

Threaded 4.9mm ball end with 4mm thread length for connection to molded ball joints. Set of 2. Direct replacement for #302652 steel balls. 



Hex Screw SB M3x10 (10)
#901310

M3x10 setscrew, hex drive. Set of 10 pieces. 



Hex Screw SH M2x5 (10)
#902205

M2x5 button-head machine screw, hex drive. Set of 10 pieces. 



Hex Screw SH M3x12 (10)
#902312

M3x12 button-head machine screw, hex drive. Set of 10 pieces. 



Carbide Ball-Bearing Axial F3-8 3x8x3.5
#930138

High-precision axial thrustbearing 3x8x3.5mm for ball differential features Tungsten Carbide balls.  



Ceramic Ball 2.4mm (12)
#930220

Set of 12 premium-quality ceramic balls made from extra-hard Si3N4 silicone nitride ceramic. Significantly improves differential lifespan while reducing friction and vibration. Higher RPM capabilities. 



Ceramic Ball-Bearing Axial F3-8 3x8x3.5
#930238

High-precision axial thrustbearing 3x8x3.5mm for ball differential features ceramic balls. Highest-quality material and design guarantees the smoothest diff operation and increased life. Ceramic balls in the axial cage are made from extra-hard Si3N4 silicone nitride ceramic. Significantly improves differential lifespan while reducing friction and vibration. Higher RPM capabilities. 



Ball-Bearing 10x15x4 Rubber Sealed - Grease (2)
#941014

High-speed ball-bearings manufactured specially for XRAY. ID x OD x thickness (mm) = 10x15x4.  



CH-Clip 8 (2)
#966080

8mm CH-clip. To ensure smoother, more precise operation of the XB2 and XB4 differential, the CH clips used inside the differential are manually ground. Set of 2. 



O-Ring 10x1.5 (10)
#970100

Rubber O-ring 1.5mm thick x 10mm dia. Set of 10 pieces. 



Pin 1.5x8.8 (10)
#980159

Polished chrome pin. Dia. x length = 1.5mm x 8.8mm. Set of 10 pieces. 



ID Product Name Released
305784-O Composite Spur Gear H 84T / 48 - Orange May 27, 2019
305866-O Composite Offset Spur Gear 96T / 64 - Orange May 27, 2019
305870-O Composite Offset Spur Gear 100T / 64 - Orange May 27, 2019
305880-O Composite Offset Spur Gear 110T / 64 - Orange May 27, 2019
305342 T4F Drive Axle - HUDY Spring Steel™ Feb. 12, 2019
301210 Graphite Bumper Upper Holder 2.5mm for Adj. Body Mounts Jan. 29, 2019
301232 Foam Bumper for Adj. Body Mounts - Hard Dec. 13, 2018
301231 Foam Bumper for Adj. Body Mounts - Light Sep. 21, 2018
303125-O Alu Shim 3x6x3.0mm - Orange (10) Sep. 10, 2018
941014 Ball-Bearing 10x15x4 Rubber Sealed - Grease (2) Mar. 21, 2018
305577-O Composite Fixed Pulley 20T - Low Friction - Graphite (2) Jan. 19, 2018
305869 Composite Offset Spur Gear 99T / 64 Nov. 14, 2017
305221 ECS (ES) Drive Shaft 51mm for 2mm Pin - HUDY Spring Steel™ Sep. 06, 2017
305334 ECS ES (Extra Strong) Drive Shaft 51mm - HUDY Spring Steel™ Sep. 06, 2017
303140-O Alu Shim 3x5x2.0mm - Orange (10) Aug. 03, 2017
301228 T4 Foam Bumper Wide - Hard Apr. 19, 2017
305772 Composite Offset Spur Gear 72T / 48 Apr. 11, 2017
305776 Composite Offset Spur Gear 76T / 48 Apr. 11, 2017
305779 Composite Offset Spur Gear 79T / 48 Apr. 11, 2017
303126-K Alu Shim 3x6x5.0mm - Black (10) Mar. 24, 2017