Ball stud 6.8mm with backstop, made from steel, nickel coated. 

Aerodynamic rear wing molded from a very flexible composite mixture. All edges in critical areas are reinforced to prevent breakage. 

Molded composite rear wing shim for XB and XT series buggies and truggies. Provides additional support to prevent wing from pulling off of mounting screws. Black colour, set of 2. 

Hardcoated aluminum wheel nut. Set of 2. 

Set of molded composite servo arms includes double-arm for throttle and single-arm for steering. Fits various brands of servos. 

Brake/throttle set includes threaded steel rods, pivot joints, ball joints, adjusting collars, and all necessary hardware. 

Molded composite ball joint for 3.9mm ball. Set of 4. 

Machined pivot ball for mounting shock top mount to shock tower. Set of 4. 

Complete parts set for assembling 2 big-bore front shock absorbers for XB808. Includes front silver springs (C = 0.75). 

Complete parts set for assembling 2 big-bore rear shock absorbers for XB808. Includes rear silver springs (C = 0.54). 

Low-profile air filter set (complete). Includes composite filter elbow, base and cap, and inner/outer foam elements. Also includes tie-wraps and air filter oil. 

Low-profile air filter set (complete). Includes composite filter elbow, base and cap, and inner/outer foam elements. Also includes tie-wraps and air filter oil. 

Molded composite low-profile air filter base and cap. 

Inner + outer low-profile foam filter elements, and a tube of air filter oil. 

Molded composite fuel filter mount and fuel tubing holders.  

Body clips. Set of 10. 

High-performance body for XB808 provides extra front downforce. Special design around the engine allows the engine head to protrude as much as possible for maximum airflow and cooling. These features make this XB808 off-road body stand out among the crowd. 

M3x3 setscrew, hex drive. Set of 10 pieces. 

M3x8 button-head machine screw, hex drive. Set of 10 pieces. 

M3x10 button-head machine screw, hex drive. Set of 10 pieces. 

M3x18 button-head machine screw, hex drive. Set of 10 pieces. 

Unique custom-made left-thread screws specially developed and designed for use on off-road and truggy arms (for the lower shock mounts) to prevent the screws from turning out due to vibration. To be used only on LEFT REAR arm and RIGHT FRONT arm.  

M3x25 button-head machine screw, hex drive. Set of 10 pieces. 

M3x12 flat-head machine screw, hex drive. Set of 10 pieces.

 

M3x14 flat-head machine screw, hex drive. Set of 10 pieces.
 

M3 nylock nut. Set of 10 pieces. 

Flat washer, 2.2mm ID. Set of 10 pieces.