xrayxrayHome XRAY homeXRAY X-shopXRAY X-forumRCAmerica
supportsearchcontactguestbooksite map
newsproductsaboutusworldwide headlines
click to enable quick search
 
Alu Shim 3x6x1.0mm - Orange (10)
#303122-O

Alu shims 3x6mm size, 1mm thick. Orange color, set of 10. 



Alu Shim 3x6x2.0mm - Orange (10)
#303123-O

Alu shims 3x6mm size, 2mm thick. Orange color, set of 10. 



Alu Shim 3x5x1.0mm - Orange (10)
#303141-O

Alu shims 3x5mm, 1mm thick which can be used for various purposes including roll center adjustment.  



Pivot Ball 5.8mm with Hex (4)
#303241

Ball 5.8mm with hex cavity, for connection to molded composite ball joints. Set of four. 



Alu Chassis - Swiss 7075 T6 (3mm)
#331109

Lightweight CNC-machined chassis made from premium 3mm Swiss 7075 T6 aluminum, strategically machined in low-stress areas to make it as light as possible without adversely affecting strength or rigidity.  



Composite Adjust. Ball-Bearing Hub (4)
#332070

Molded composite adjustable ball-bearing hub. Set of 4.  



Composite Susp. Eccentric Bushing (2+2)
#332317

Molded composite eccentric suspension pin inserts with 2 different offset positions.  



Adj. Turnbuckle L/R 22mm - Hudy Spring Steel™ (2)
#332630

CNC-machined adjustable turnbuckles, 22mm length, made from tough HUDY Spring Steel™. Set of 2. 



Composite Steering & Servo Ball Joint 5.8mm (4+2)
#332660

Molded composite 5.8 ball joints for steering & servo linkages. Includes 4 long and 2 short ball joints. 



Alu Lower Bulkhead Rear - Swiss 7075 T6 - Right
#333016

Re-designed aluminum rear RIGHT bulkhead.  



Alu Lower Bulkhead Rear - Swiss 7075 T6 - Left
#333026

Re-designed aluminum rear LEFT bulkhead.  



Alu Rear Upper Bulkhead - Swiss 7075 T6 (L+R)
#333037

Aluminum rear upper bulkheads re-designed to work with the 333016 and 333026 rear bulkheads offer increased durability.  



Graphite Rear Bulkheads Brace 2.5mm
#333053

CNC-machined rear bulkhead brace made from 2.5mm premium-grade graphite material.  



Graphite Roll-Center Bridge 4.0mm
#333063

Rear roll center bridge CNC-machined from 4mm thick, top-grade graphite.  



Graphite Shock Tower Rear 3.5mm
#333083

Re-designed graphite rear shock tower machined from 3.5mm thick graphite material for improved high-speed steering.  



Composite Suspension Arm Rear Lower - V2
#333110

Molded composite suspension arm, rear lower. Used on either left or right side. 



Composite Rear Upper Camber Link Ball Joint 5.8mm (4)
#333130

Molded composite 5.8mm ball joints for rear upper camber link. Set of 4. 



Pivot Ball 5.8mm with Hex (4)
#333240

Steel 5.8mm pivot balls with double shoulders and 4mm hex slot in one end. Set of 4. 



Composite Upright Rear for Aero Disc
#333311

Compact rear uprights are small in size but are very strong due to the special composite mixture used.  



Composite Anti-Roll Bar Ball Joint 4.9mm (4) - V3
#333461

Molded composite 4.9mm ball joint for anti-roll bar linkages. Has hole for M3x4 setscrew. Set of 4. Allows height adjustment of anti-roll bar linkages. 



Anti-Roll Bar Rear for Ball-Bearings 2.0mm
#333470

Rear anti-roll bar redesigned to work with new bulkheads and ball-bearing roll bar mounting system.  



Alu Rear Lower 1-Piece Suspension Holder - Front - RF
#333711

Re-designed CNC-machined aluminum rear-front 1-piece suspension holder allows mounting of the rear bulkheads into the holder for improved rear suspension flex.  



Alu Rear Lower 1-Piece Suspension Holder - Rear - RR
#333720

Alu rear lower suspension holder for the REAR of the rear bulkhead, CNC-machined from premium Swiss 7075 T6 aluminum.  



Alu Brake Stand - Multi-Flex - Swiss 7075 T6 - Set
#334012

Aluminum brake stand bulkhead is separate from the rear bulkheads to give proper flex and maximum traction. Re-designed to fit inside the chassis for better, more precise placement. 



Alu 2-Speed Holder - Multi-Flex - Swiss 7075 T6 - Set
#334022

Aluminum 2-speed holder bulkhead is separate from the rear bulkheads to give proper flex and maximum traction. Re-designed to fit inside the chassis for better, more precise placement.  



Steel Brake Cam Post
#334041

Steel brake cam post, ball-bearing supported for smooth and precise brake control. 



Composite Brake Upper Plate
#334052

Molded composite rear bulkhead brake cross plate. 



Composite 6x13x5 Ball-Bearing Hub (2)
#334070

Molded composite hubs for supporting ball-bearings in 2-speed bulkhead blocks. Set of 2. 



Ventilated Brake Disc - Laser Cut - Precision-Ground
#334112

Smaller-diameter (28.6mm) ventilated brake disk for NT1. Laser-cut, heat-treated, precision-ground. Vibration-free operation. 



Hardened Steel Brake Pad - Laser Cut (2)
#334120

High-precision, ultra-efficient steel brake pads for NT1 are laser cut and precision ground on both sides for an ultra-smooth surface finish to guarantee maximum braking efficiency. Set of 2. 



Brake Pad SLS (2)
#334132

Ultra-efficient brake pads made from new SLS high-friction material for smoother, more consistent braking. Set of 4. 



Alu Brake Disk Adapter - Swiss 7075 T6 - Orange
#334140-O

CNC-machined brake disk adapter made from tough 7075 T6 aluminum. Includes factory-pressed pins (non-replaceable).  



Rear Gear Differential - Set
#335050

Complete rear gear differential set for NT1 includes composite differential case and cover. Differential gears are made from pressed steel, heat treated, and machined for ultra-precision and smooth operation. CNC-machined diff outdrive adaptors made from tough HUDY Spring Steel™. Shafts are precision ground and polished for smooth operation. Not factory pre-assembled. 



Drive Axle - Hudy Spring Steel™
#335210

CNC-machined drive axle for NT1 made from world-renowned HUDY Spring Steel™. Used for front or rear with standard drive shafts (not for use with CVD sets). 



Alu Wheel Hub 12mm (2)
#335250

CNC-machined, premium aircraft aluminum standard offset wheel hubs for XRAY NT1, a direct replacement for composite wheel hubs. These wheel hubs are strategically machined for optimum strength, balance, and lightness, and are marked for easy identification. Secured on drive axle by setscrew. Set of 2 hubs in each package. 



Drive Shaft - 60mm - Hudy Spring Steel™
#335320

CNC-machined rear drive shaft (60mm) made from world-renowned HUDY Spring Steel™. Used for REAR only. Use with #335210 drive axle. 



Pur® Reinforced Drive Belt Rear 5.5x177mm - V2
#335450

PUR® reinforced rear drive belt. 5.5 x 177mm. This belt is very thin and elastic as possible for an extremely efficient, low-friction drivetrain. 



2-Speed Shaft
#335510

2-speed layshaft is precision ground, heat-treated and polished for smooth operation, extra strength, and long life. 



Composite Belt Pulley 20T - 2-Speed-Center
#335810

Molded composite 20T belt pulley on main layshaft, drives rear belt. 



Steel Pivot Ball 8.4mm (2)
#337250

Steel 8.4mm pivot balls hardened and ultra-precisely hand ground for very high durability and long life. Set of 2.  



Composite Adjusting Nut with Ball Cup (4)
#337253

Composite M10 adjusting nut for capturing pivot balls in front steering blocks and rear uprights. Lighter than standard nut, easier mounting and usability. Fine tuning for serious racers. Set of 4. 



Rear Lower Inner Pivot Pin (2)
#337312

Rear lower inner pivot pins 3x50 mm.  



Alu Cutted Anti-Roll Bar Collar o3.1 - Black (2)
#343481-K

Alu anti-roll bar collars remove play from the front and rear anti-roll bar wires. 



Ball End 4.9mm With Thread 6mm (2)
#362650

Threaded 4.9mm ball end with 6mm thread length for connection to molded ball joints. Set of 2. 



ID Product Name Released
334070 Composite 6x13x5 Ball-Bearing Hub (2) Mar. 30, 2015
333461 Composite Anti-Roll Bar Ball Joint 4.9mm (4) - V3 Mar. 24, 2014
343481-K Alu Cutted Anti-Roll Bar Collar o3.1 - Black (2) Mar. 24, 2014
334140-O Alu Brake Disk Adapter - Swiss 7075 T6 - Orange Mar. 14, 2013
362650 Ball End 4.9mm With Thread 6mm (2) Dec. 01, 2012
337253 Composite Adjusting Nut with Ball Cup (4) Feb. 17, 2010
303122-O Alu Shim 3x6x1.0mm - Orange (10) Oct. 31, 2008
303123-O Alu Shim 3x6x2.0mm - Orange (10) Oct. 31, 2008
335250 Alu Wheel Hub 12mm (2) May 30, 2007
332070 Composite Adjust. Ball-Bearing Hub (4) Apr. 19, 2007
332630 Adj. Turnbuckle L/R 22mm - Hudy Spring Steel™ (2) Apr. 19, 2007
332660 Composite Steering & Servo Ball Joint 5.8mm (4+2) Apr. 19, 2007
333110 Composite Suspension Arm Rear Lower - V2 Apr. 19, 2007
333130 Composite Rear Upper Camber Link Ball Joint 5.8mm (4) Apr. 19, 2007
333240 Pivot Ball 5.8mm with Hex (4) Apr. 19, 2007
334120 Hardened Steel Brake Pad - Laser Cut (2) Apr. 19, 2007
335050 Rear Gear Differential - Set Apr. 19, 2007
335210 Drive Axle - Hudy Spring Steel™ Apr. 19, 2007
335320 Drive Shaft - 60mm - Hudy Spring Steel™ Apr. 19, 2007
335450 Pur® Reinforced Drive Belt Rear 5.5x177mm - V2 Apr. 19, 2007