CNC-machined M5 adjustable turnbuckles, 91mm length, made from tough HUDY Spring Steel™. Set of 2.
Molded composite rear brace holder, can be mounted either on left or right side.
Inner ball joint for rear upper camber link. Set of 2.
Molded composite rear upper camber link ball joints fit on the outside end of the camber link turnbuckle of the XT8. Set of 2.
Mounting pivot ball with shoulder 6.8mm dia. Set of 4.
Pivot ball 6.8mm diameter. Set of 4.
Right rear hub carrier. Features 3 upper camber link mounting positions, and 2 lower pin roll-center positions.
Left rear hub carrier. Features 3 upper camber link mounting positions, and 2 lower pin roll-center positions.
Rear wing posts made of tough composite material. Complete set of 4 pieces.
Tough molded composite shim set used for prolonging or shortening the rear wing for increased or decreased rear traction. Shims are positioned between the rear shock tower and the wing holders.
Rear wing mounting braces made from tough molded composite material. Set of self-tapping screws included.
Hardcoated lightweight aluminum wheel axles with +5mm offset. May be used at either front and rear. Set of 2.
Universal drive shaft used on the XT8 generates more traction and has less resistance in the front when maximum steering angle is applied.
Polished chrome pin with flat spot, 3.0 x 16.8mm. Specially hand-ground for maximum precision. Set of 2.
Rear lower outer pivot pins. Hardened steel, 3mm thick. Set of 2.
M5x4 setscrew, hex drive. Set of 10 pieces.
M3x14 button-head machine screw, hex drive. Set of 10 pieces.
M3x18 button-head machine screw, hex drive. Set of 10 pieces.
M3x22 button-head machine screw, hex drive. Set of 10 pieces.
M3x12 flat-head machine screw, hex drive. Set of 10 pieces.
M3x25 socket-head cap screw, hex drive. Set of 10.
New high-speed ball-bearings manufactured specially for XRAY. ID x OD x thickness (mm) = 8x14x4. Set of 2 pieces.
Replaced by Ball-Bearing 8x14x4 Rubber Sealed - Grease (2)
New high-speed ball-bearings manufactured specially for XRAY. ID x OD x thickness (mm) = 8x16x5. Set of 2 pieces.
M3 nylock nut. Set of 10 pieces.
