Machined alu countersunk shims for use on XRAY Quick Saver™. Set of 4. 

XRAY presents +1mm height-adjustable body posts for the T2 and NT1. For serious racers who focus on the small details, body height plays a very important role in the performance of the car and as such, ultra-fine body height tuning was developed by XRAY R&D engineers to address this increasingly important tuning set-up feature. 

XRAY presents +2mm height-adjustable body posts for the T2 and NT1. For serious racers who focus on the small details, body height plays a very important role in the performance of the car and as such, ultra-fine body height tuning was developed by XRAY R&D engineers to address this increasingly important tuning set-up feature. 

Very handy, easily externally adjustable body posts from Swiss 7075 T6 aluminum. Allows for adjustment of body height by 3mm without needing to change the position on the body post. 

Alu body post stop nut for #301351-O made from Swiss 7075 T6 aluminum. Spare part for #301351-O Alu Adjustable Body Post Stop (2). 

Ultimate assortment of set-up shims. You can use the shims for easy and accurate adjustment of:
- front and rear roll center
- front bump steer
- front and rear toe-in
- wheelbase  

Ultimate assortment of set-up shims. You can use the shims for easy and accurate adjustment of:
• front and rear roll center
• front bump steer
• front and rear toe-in
• wheelbase  

Alu shims 3x6mm size, 0.5mm thick. Black color. Set of 10. 

Alu shims 3x6mm size, 1mm thick. Silver color, set of 10. 

Alu shims 3x6mm size, 1mm thick. Black color, set of 10. 

Alu shims 3x6mm size, 2mm thick. Silver color, set of 10. 

Alu shims 3x6mm size, 2mm thick. Black color, set of 10. 

Alu shims 3x6mm size, 3mm thick. Set of 10. 

Alu shims 3x6mm size, 3mm thick. Black color. Set of 10. 

Alu shims 3x6mm size, 3mm thick. Orange color. Set of 10. 

Alu shims 3x6mm size, 5mm thick. Black color, set of 10. 

Alu shims 3x5mm, 2.0mm thick which can be used for various purposes including roll center adjustment. Orange color. Set of 10.

Color may slightly vary between products.
 

Alu shims, 1.0mm thick, for rear roll center adjustment on XRAY T2. Set of 10. 

Alu shims 3x5mm, 1mm thick which can be used for various purposes including roll center adjustment.  

Gear differential cross pin made from tough composite material. 

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 

These narrow pinions are manufactured by XRAY on a specially-modified precision gear machine for ultra-precise tolerances and unparalleled concentricity.  

These narrow pinions are manufactured by XRAY on a specially-modified precision gear machine which has ultra-precise tolerances and assures unparalleled concentricity. After machining, the edges of pinions are chamfered and then the pinions are run in. The pinions are then specially treated to give them an even hardcoating so they stay absolutely true for a long time.  

These narrow pinions are manufactured by XRAY on a specially-modified precision gear machine which has ultra-precise tolerances and assures unparalleled concentricity. After machining, the edges of pinions are chamfered and then the pinions are run in. The pinions are then specially treated to give them an even hardcoating so they stay absolutely true for a long time. 

These narrow pinions are manufactured by XRAY on a specially-modified precision gear machine which has ultra-precise tolerances and assures unparalleled concentricity. After machining, the edges of pinions are chamfered and then the pinions are run in. The pinions are then specially treated to give them an even hardcoating so they stay absolutely true for a long time.  

These narrow pinions are manufactured by XRAY on a specially-modified precision gear machine for ultra-precise tolerances and unparalleled concentricity.  

These narrow pinions are manufactured by XRAY on a specially-modified precision gear machine which has ultra-precise tolerances and assures unparalleled concentricity. After machining, the edges of pinions are chamfered and then the pinions are run in. The pinions are then specially treated to give them an even hardcoating so they stay absolutely true for a long time.  

These narrow pinions are manufactured by XRAY on a specially-modified precision gear machine which has ultra-precise tolerances and assures unparalleled concentricity. After machining, the edges of pinions are chamfered and then the pinions are run in. The pinions are then specially treated to give them an even hardcoating so they stay absolutely true for a long time. v 

These narrow pinions are manufactured by XRAY on a specially-modified precision gear machine for ultra-precise tolerances and unparalleled concentricity.  

These narrow pinions are manufactured by XRAY on a specially-modified precision gear machine which has ultra-precise tolerances and assures unparalleled concentricity. After machining, the edges of pinions are chamfered and then the pinions are run in. The pinions are then specially treated to give them an even hardcoating so they stay absolutely true for a long time.  

These narrow pinions are manufactured by XRAY on a specially-modified precision gear machine which has ultra-precise tolerances and assures unparalleled concentricity. After machining, the edges of pinions are chamfered and then the pinions are run in. The pinions are then specially treated to give them an even hardcoating so they stay absolutely true for a long time.  

XRAY Premium Silicone Oil 100 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 150 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 200 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 250 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 300 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 350 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 400 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 450 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 500 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 550 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 600 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 800 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 900 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 1000 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 2000 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 5000 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 6000 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 7000 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 8000 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 10 000 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

Threaded 4.9mm ball end with 8mm thread length for connection to molded ball joints. Set of 2. 

CNC-machined X12 chassis made from 2.0mm Swiss 7075 T6 aluminum which is more suitable for high- and very-high traction US-style tracks. 

CNC-machined rear pod lower plate made from 2.0mm premium-grade aluminum material. Countersunk holes for smooth, flat bottom. 

Redesigned CNC-machined graphite bumper holder improves aerodynamics (mainly of lightweight body shells) as it prevents the front lip of the body from folding down at high speeds, and gives the body better protection in hard crashes.  

Molded composite RIGHT front upper arm mount for XRAY XII. Marked ‶R※ for easy identification. Use with matching left upper arm mount 372020. 

RIGHT front upper arm mount for X10 and X12 cars made from specially-formulated graphite composite material.  

Molded composite LEFT front upper arm mount for XRAY XII. Marked ‶L※ for easy identification. Use with matching right upper arm mount 372010. 

LEFT front upper arm mount for X10 and X12 cars made from specially-formulated graphite composite material.  

RIGHT front lower suspension arm for X10 and X12 cars made from specially-formulated graphite composite material.  

LEFT front lower suspension arm for X10 and X12 cars made from specially-formulated graphite composite material.  

Unique RIGHT graphite suspension arm reduces torsional flex of the arms in corners on very-high traction tracks.  

Unique LEFT graphite suspension arm reduces torsional flex of the arms in corners on very-high traction tracks.  

Molded composite front upper suspension arm & ball joint for XRAY XII. Fits either left or right sides. 

Molded composite front upper suspension arm. Molded from specially-formulated graphite composite mixture that helps to increase steering and makes the car more predictable. Fits left or right sides. 

Ultimate-match coil shock springs for pan cars and formula front suspension offer an additional range of choices to fine-tune your car.  

Ultimate-match coil shock springs for pancars and formula front suspension offer an additional range of choices to fine-tune your car.  

Ultimate-match coil shock springs for pan cars and formula front suspension offer an additional range of choices to fine-tune your car.  

Ultimate-match coil shock springs for pancars and formula front suspension offer an additional range of choices to fine-tune your car.  

Ultimate-match front coil shock springs for pan car front suspension offer an additional range of choices to fine-tune your car. Powder color-coded for quick & easy identification. Silver color. Set of 2. 

Ultimate-match front coil shock springs for pan car front suspension offer an additional range of choices to fine-tune your car. Powder color-coded for quick & easy identification. Black color. Set of 2. 

Ultimate-match front coil shock springs for pan car front suspension offer an additional range of choices to fine-tune your car. Powder color-coded for quick & easy identification. Grey color. Set of 2. 

Molded composite RIGHT steering block for XRAY XII. Marked ‶R※ for easy identification. Use with matching left front lower suspension arm 372220. 

Molded composite LEFT steering block for XRAY XII. Marked ‶L※ for easy identification. Use with matching right front lower suspension arm 372210. 

Alu lower graphite suspension arm holder, CNC-machined from highest-grade Swiss 7075 T6 aluminum.  

Smart eccentric aluminum inserts which allow quick and easy change and track-width set-up according to track conditions. Optional eccentric aluminum 0.5mm and 1.0mm are used to set narrower or wider track-width. Fits X12’14.Set of 2. 

Smart eccentric aluminum inserts which allow quick and easy change and track-width set-up according to track conditions. Optional eccentric aluminum bushings 0.0 mm and 1.0mm are used to set narrower or wider track-width. Fits X12’14. Set of 2. 

Smart eccentric aluminum inserts for quick & easy track-width changes.  

Smart eccentric aluminum inserts which allow quick and easy change and track-width set-up according to track conditions. Optional eccentric aluminum bushings 0.0mm and 0.5mm are used to set narrower or wider track-width. Fits X12’14. Set of 2. 

Smart eccentric aluminum inserts for quick & easy track-width changes.  

Smart centric aluminum bushing for suspension arms.  

Smart eccentric aluminum 0.5mm bushing allows for quick & easy track-width changes to adapt to track conditions.  

Smart eccentric aluminum 1.0mm bushing allows for quick & easy track-width changes to adapt to track conditions. 

Adjustable left & right M3 steering turnbuckles manufactured from strong, lightweight 7075 T6 aluminum. Precision threading for fine toe adjustment. Length of 42mm. Set of 2. 

High-precision threaded 4.9mm ball end manufactured from special HUDY Spring Steel™. 

Molded composite steering ball-joint for XRAY XII. Fits 4.2mm pivot ball or ball stud. Set of 4. 

CNC-machined alu rear brace mount for XRAY X12. Set of 2. 

CNC-machined rear brace for XRAY X12’19 made from 2.5mm premium-grade graphite material.  

CNC-machined battery backstop for XRAY X12???19 made from premium-grade graphite material. 

Matched set of lighter molded composite upper & lower pivot braces for link rear pod suspension of XRAY pan cars.  

CNC-machined rear pod upper plate made from 2.5mm premium-grade graphite material. 

Side springs C=0.6 for X12’14. The new side springs and spring caps feature a new straight design comparing to the previously used conical shape, to improve side traction and improve the handling of the car.  

Side springs C=1.2 for X12’14. The new side springs and spring caps feature a new straight design comparing to the previously used conical shape, to improve side traction and improve the handling of the car. 

Side springs C=1.5 for pan cars and formula cars. The side springs and spring caps feature a straight design (compared to the previously-used conical springs) to improve side traction and handling.  

Side springs C=1.8 for pan cars and formula cars. The side springs and spring caps feature a straight design (compared to the previously-used conical springs) to improve side traction and handling.  

XRAY self-designed, revolutionary, super-smooth gear diff for 1/12 pan cars is a direct replacement for the ball-differential; it is a complete set which requires no other extra parts and no extra adjustments.
 

Gear differential case made from specially-formulated graphite composite mixture for increased strength and lower weight. 

Gear differential cover made from specially-formulated graphite composite mixture for increased strength and lower weight. 

Gear differential precision internal gears made from tough composite material. 

Alu gear differential shaft, CNC-machined from high-grade Swiss 7075 T6 aluminum. 

Sealing gasket for gear differential housing. Set of 4. 

Lightweight and strong rear axle assembly for XRAY XII or XRAY X10 features a super-light and tough alu shaft that is specially machined for perfect balance and smoothness with zero run-out for vibration-free operation. Made from Swiss 7075 T6 aluminum. 

Strong rear axle assembly for XRAY XII, X12 or XRAY X10 features tough shaft that is specially machined for perfect balance and smoothness with zero run-out for vibration-free operation. 

Strong, lightweight rear axle for XRAY gear diff for 1/12 & 1/10 pan cars and 1/10 formula cars. 

Strong rear axle shaft for 1/12 pan car or 1/10 formula gear differential features tough shaft that is specially machined for perfect balance and smoothness with zero run-out for vibration-free operation. Made from HUDY Spring Steel™. 

Right rear wheel hub for gear differential, CNC-machined from lightweight aircraft aluminum, specially lightened and black coated for stylish look.  

CNC-machined alu shim set for rear track-width adjustment on XRAY XII. Different thicknesses include 0.5, 1.0, and 2.0mm. 

Precision-molded composite spur gear for gear differential. 76 tooth, 64-pitch. Popular sizes available. 

Precision-molded composite spur gear for gear differential. 80 tooth, 64-pitch. Popular sizes available. 

Precision-molded composite spur gear for gear differential. 84 tooth, 64-pitch. Popular sizes available. 

Precision-molded composite spur gear for gear differential. 88 tooth, 64-pitch. Popular sizes available. 

Precision-molded composite spur gear for gear differential. 92 tooth, 64-pitch. Popular sizes available. 

Precision-moulded composite spur gear 72 tooth, 64-pitch. Popular sizes available. 

Precision-moulded composite spur gear 75 tooth, 64-pitch. Popular sizes available. 

Precision-moulded composite spur gear 76 tooth, 64-pitch. Popular sizes available. 

Precision-moulded composite spur gear 78 tooth, 64-pitch. Popular sizes available. 

Precision-moulded composite spur gear 80 tooth, 64-pitch. Popular sizes available. 

CNC-machined alu posts for steering servo mount. Set of 2. Distinctive orange color. 

Lightweight and strong fiberglass solid antenna rod for XRAY XII, includes plastic cap. 

CNC-machined plate made from 2.5mm premium-grade graphite material.  

CNC-machined 6.0mm alu mount. Orange color. Set of 2.
 

Molded composite parts for XRAY XII micro shock absorber. 

CNC-machined alu lower cap for XRAY XII micro shock absorber. 

CNC-machined alu threaded shock spring preload collar XRAY XII micro shock absorber. 

CNC-machined alu upper cap for XRAY XII micro shock absorber. 

CNC-machined alu lower spring collar for XRAY XII micro shock absorber. Ultra-fine threaded post for precise shock length adjustment. 

Shock spring for XRAY XII micro shock absorber. 

Shock spring for XRAY XII Link central micro shock absorber. 

Shock spring for XRAY XII or X10 Link central shock absorber, stiff hardness. Increases stability and ease of driving on high-grip tracks. Improves initial steering. Recommended for high-traction tracks. 

Shock spring for central shock absorber with progressive C=1.4-1.9. Increased overall traction, steering response, and off-power steering. 

Shock spring for central shock absorber with progressive C=2.0-2.5 spring rate. Increased overall traction, steering response, and off-power steering. 

Side shock absorber set for XRAY XII Link includes all parts necessary to build one complete side shock absorber. 

Complete set of molded composite parts for XRAY XII Link side shock absorber #378100. 

CNC-machined alu shock body for side shock absorber of XRAY XII Link. Made from exclusive Swiss 7075 T6 aluminum to ensure maximum strength and rigidity. Manufactured on the world's most precise German long-turn CNC machine. Hardcoated for super-smooth, bind-free operation and durability. 

Hardened, high-strength shock absorber shaft for XRAY XII Link side shock absorber. Polished for super-smooth, bind-free operation. 

CNC-machined alu shock collar for XRAY XII Link side shock absorber. Fine-pitch threading for quick & easy length adjustment. 

CNC-machined alu shock collar side shock absorber. Fine-pitch threading for quick & easy length adjustment. Orange color. 

Set of black & white transparent XRAY X12 stickers for your body. Fits any 1/12th scale body, or looks great on your tool box as well. 

Set of 12 premium-quality ceramic balls made from extra-hard Si3N4 silicone nitride ceramic. Significantly improves differential lifespan while reducing friction and vibration. Higher RPM capabilities. 

High-precision axial thrustbearing 3x8x3.5mm for ball differential features ceramic balls. Highest-quality material and design guarantees the smoothest diff operation and increased life. Ceramic balls in the axial cage are made from extra-hard Si3N4 silicone nitride ceramic. Significantly improves differential lifespan while reducing friction and vibration. Higher RPM capabilities. 

Silicone o-ring 0.7mm thick x 25.5mm dia. Set of 10 pieces.