4.9mm alu ball end with inner M3 thread for connection to molded ball joints.  

Ultimate assortment of set-up shims. You can use the shims for easy and accurate adjustment of:
- front and rear roll center
- front bump steer
- front and rear toe-in
- wheelbase  

Ultimate assortment of set-up shims. You can use the shims for easy and accurate adjustment of:
• front and rear roll center
• front bump steer
• front and rear toe-in
• wheelbase  

Alu shims 3x6mm size, 0.5mm thick. Black color. Set of 10. 

Alu shims 3x6mm size, 0.5mm thick. Orange color. Set of 10. 

Alu shims 3x6mm size, 1mm thick. Silver color, set of 10. 

Alu shims 3x6mm size, 1mm thick. Black color, set of 10. 

Alu shims 3x6mm size, 1mm thick. Orange color, set of 10. 

Alu shims 3x6mm size, 2mm thick. Black color, set of 10. 

Alu shims 3x6mm size, 2mm thick. Orange color, set of 10. 

Alu shims 3x6mm size, 3mm thick. Set of 10. 

Alu shims 3x6mm size, 3mm thick. Black color. Set of 10. 

Alu shims 3x6mm size, 3mm thick. Orange color. Set of 10. 

Alu shims 3x6mm size, 5mm thick. Black color, set of 10. 

Alu shims 3x5mm, 2.0mm thick which can be used for various purposes including roll center adjustment. Orange color. Set of 10.

Color may slightly vary between products.
 

Alu shims 3x5mm, 1mm thick which can be used for various purposes including roll center adjustment.  

Alu shims 3x5mm, 0.5mm thick which can be used for various purposes including roll center adjustment. Orange color. Set of 10. 

Alu shims 3x5mm, 0.25mm thick which can be used for various purposes including roll center adjustment. Set of 10.  

Alu shims 3x5mm, 4mm thick which can be used for various purposes.  

Alu 4.9mm ball ends, same as included in anti-roll bar sets #302401 (front) and #303401 (rear). Set of 2. Black colour. 

Differential spring for ball differential. 

Hudy Spring Steelâ„¢ drive shaft coupling for Set Screw for increased reliability, works in front and rear CVD drive shafts of XRAY T2, T3. Specially hand-ground for maximum precision.  

Limited-quantity upgrade set to convert your XB2C into the same Spec version used by the Factory Team at carpet tracks.  

The XRAY XB2 graphite chassis improves the traction and is suggested especially for low to medium traction conditions. 

CNC-machined from high-quality 2mm Swiss 7075 T6 aluminum, redesigned for improved handling.  

Part of the Multi-Flexâ„¢ system, the front upper deck is used to adjust chassis flex.  

Part of the Multi-Flexâ„¢ system, the front upper deck is used to adjust chassis flex.  

High-quality CNC-machined front wing holder made from premium graphite material. Complete set including shims and mounting hardware.  

Alu Front Suspension Holder Brace 23°/29° Kick-Up - 7075 T6 

Side guards are an integral part of the XB2 Multi-Flexâ„¢ system.