4.9mm alu ball end with inner M3 thread for connection to molded ball joints.  

Ultimate assortment of set-up shims. You can use the shims for easy and accurate adjustment of:
- front and rear roll center
- front bump steer
- front and rear toe-in
- wheelbase  

Ultimate assortment of set-up shims. You can use the shims for easy and accurate adjustment of:
• front and rear roll center
• front bump steer
• front and rear toe-in
• wheelbase  

Alu shims 3x6mm size, 0.5mm thick. Black color. Set of 10. 

Alu shims 3x6mm size, 0.5mm thick. Orange color. Set of 10. 

Alu shims 3x6mm size, 1mm thick. Silver color, set of 10. 

Alu shims 3x6mm size, 1mm thick. Black color, set of 10. 

Alu shims 3x6mm size, 1mm thick. Orange color, set of 10. 

Alu shims 3x6mm size, 2mm thick. Black color, set of 10. 

Alu shims 3x6mm size, 2mm thick. Orange color, set of 10. 

Alu shims 3x6mm size, 3mm thick. Set of 10. 

Alu shims 3x6mm size, 3mm thick. Black color. Set of 10. 

Alu shims 3x6mm size, 3mm thick. Orange color. Set of 10. 

Alu shims 3x6mm size, 5mm thick. Black color, set of 10. 

Alu shims 3x5mm, 2.0mm thick which can be used for various purposes including roll center adjustment. Orange color. Set of 10.

Color may slightly vary between products.
 

Alu shims 3x5mm, 1mm thick which can be used for various purposes including roll center adjustment.  

Alu shims 3x5mm, 0.5mm thick which can be used for various purposes including roll center adjustment. Orange color. Set of 10. 

Alu shims 3x5mm, 0.25mm thick which can be used for various purposes including roll center adjustment. Set of 10.  

Alu shims 3x5mm, 4mm thick which can be used for various purposes.  

Alu 4.9mm ball ends, same as included in anti-roll bar sets #302401 (front) and #303401 (rear). Set of 2. Black colour. 

Differential spring for ball differential. 

Hudy Spring Steelâ„¢ drive shaft coupling for Set Screw for increased reliability, works in front and rear CVD drive shafts of XRAY T2, T3. Specially hand-ground for maximum precision.  

Limited-quantity upgrade set to convert your XB2C into the same Spec version used by the Factory Team at carpet tracks.  

The XRAY XB2 graphite chassis improves the traction and is suggested especially for low to medium traction conditions. 

CNC-machined from high-quality 2mm Swiss 7075 T6 aluminum, redesigned for improved handling.  

Part of the Multi-Flexâ„¢ system, the front upper deck is used to adjust chassis flex.  

Part of the Multi-Flexâ„¢ system, the front upper deck is used to adjust chassis flex.  

High-quality CNC-machined front wing holder made from premium graphite material. Complete set including shims and mounting hardware.  

Aluminum front lower arm mount 23°/29° kick-up brace made from high-quality Swiss 7075 T6 aluminum.  

Side guards are an integral part of the XB2 Multi-Flexâ„¢ system.  

The front lower chassis brace is another component of the Multi-Flexâ„¢ system that influences flex and the handling of the car. 

Graphite brace installed in front part of side guards makes the front chassis flex stiffer. 

Graphite brace installed at the front of side guards to make the front chassis flex stiffer − STIFF setting.  

CNC-machined gear box height adjustment plate made from premium-grade graphite material.  

CNC-machined gear box height adjustment plate made from premium-grade graphite material.  

MEDIUM-hardness composite front roll-center holder. The holder generates more traction, absorbs bumps better. 

Optional front roll-center holder CNC-machined from high-quality 2mm Swiss 7075 T6 aluminum.  

CNC-machined front shock tower made from 4.0mm thick premium-grade graphite material for incredible strength and long lifespan. Includes multiple shock positions. 

CNC-machined alu front shock tower from 3mm thick premium Swiss 7075 T6 aluminum.  

Front lower suspension arm made from specially-formulated graphite composite material.  

MEDIUM-hardness front lower suspension arm made from high-tech composite material.
 

Front lower RIGHT suspension arm made from specially-formulated graphite composite material.  

Front lower RIGHT suspension arm made from super-tough high-tech composite material suitable for most track conditions.  

GRAPHITE molded composite C-hub for RIGHT steering block. The specially-formulated graphite composite material is a perfect balance between reliability and performance.  

MEDIUM-hardness molded composite RIGHT C-hub, suitable for most track conditions especially for very-low-, low- and medium-traction tracks. Absorbs bumps better, easy to drive. Use with left C-hub #322220-M 

GRAPHITE molded composite C-hub for LEFT steering block. The specially-formulated graphite composite material is a perfect balance between reliability and performance.  

MEDIUM-hardness molded composite LEFT C-hub, suitable for most track conditions especially for very-low-, low- and medium-traction tracks. Absorbs bumps better, easy to drive. Use with right C-hub #322210-M. 

Molded composite steering block from specially-formulated graphite composite material is a perfect balance between reliability and performance.  

MEDIUM-hardness molded composite steering block is tiny yet tough, includes graphite Ackermann extension for variable Ackermann positions. Generates more steering, more aggressive handling of the car. 

Steering block graphite extension, works on either left or right side. Allows for easy Ackermann position adjustment for fine-tuning on all surfaces and track conditions.  

Steering block graphite extension, works on either left or right side. Allows for easy Ackermann position adjustment for fine-tuning on all surfaces and track conditions. 

Optional aluminum lower arm mount has an integrated 26° kick-up angle. The alu arm mount makes the car more stable and increases on-power steering. 

The brass lower arm mount V2 features 0° kick-up and weights 46g. This arm mount adds more weight in front which results in less weight transfer and increased on-power steering. Direct replacement for composite one.
 

Optional aluminum kick-up mount with integrated 23° and 29° kick-up angle. The alu arm mount makes the car more stable and increases on-power steering. 

Optional brass kick-up mount with integrated 23° and 29° kick-up angle. 

CNC-machined steering arm made from high-quality Swiss 7075 T6 aluminum.  

Alu steering plate CNC-machined from premium Swiss 7075 T6 aluminum.  

Alu steering plate for rearward linkage mounting allows mounting the steering linkages more rearwards which makes the steering more precise and makes the car more predictable and results in smoother feeling.  

Molded composite motor gear box made from premium composite material accommodates 3 gears. The graphite molded gear box is lighter and stronger. 

Optional alu rear roll-center holder CNC-machined from premium Swiss 7075 T6 aluminum, suitable for very-high-traction tracks. 

CNC-machined rear shock tower made from 3.5mm thick premium-grade graphite material to guarantee incredible strength and long lifespan. Includes multiple shock positions. 

CNC-machined alu rear shock tower from 3mm thick premium Swiss 7075 T6 aluminum.  

Rear lower RIGHT suspension arm made from specially-formulated graphite composite material is a perfect balance between reliability and performance.  

Rear lower RIGHT suspension arm made from medium-hardness composite material gives a perfect balance between reliability and performance.  

Rear lower RIGHT suspension arm redesigned to move arm maximum forward. 

Rear lower RIGHT suspension arm with redesigned geometry for improved consistency and handling.  

Rear lower LEFT suspension arm made from specially-formulated graphite composite material is a perfect balance between reliability and performance.  

Rear lower LEFT suspension arm made from medium-hardness composite material gives a perfect balance between reliability and performance.  

Alu rear lower suspension holder for the FRONT of the rear suspension. CNC-machined from 5mm premium Swiss 7075 T6 aluminum.  

Optional brass lower suspension holders for the FRONT of the rear suspension provide additional weight down low to improve traction and stability while lowering the car’s CG.
 

Optional brass rear lower suspension holder for the FRONT of the rear suspension provide additional weight down low to improve traction and stability while lowering the car’s CG. 

Optional brass lower suspension holders for the REAR of the rear suspension provide additional weight down low to improve traction and stability while lowering the car’s CG. 

Alu rear lower suspension holder for the REAR of the rear suspension. CNC-machined from 5mm premium Swiss 7075 T6. Ultra-strong construction provides very long lifespan and durability in even the most extreme racing conditions. 

Optional brass rear lower suspension holder for the REAR of the rear suspension provide additional weight down low to improve traction and stability while lowering the car’s CG. 

Redesigned rear lower suspension holder for the REAR of the rear suspension allows use of XB4 arms at rear of XB2 cars. CNC-machined from premium Swiss 7075 T6 aluminum.  

Super-compact rear upright made from specially-formulated graphite composite material features multiple set-up options for upper & lower roll centers. 

Super-compact rear upright, CNC-machined from high-grade Swiss 7075 T6 aluminum, featuring multiple set-up options for upper & lower roll centers. 

1-hole alu rear hub plate for multi-adjustable rear upright, CNC-machined from high-grade Swiss 7075 T6 aluminum.  

Optional REAR wing for XB2 made from thick Lexan material is highly reliable with less chance of breakage, gives higher traction & stability, but reduces steering. 

Stylish, effective rear center fin was developed and long term tested to maximize the rear wing air flow efficiency.  

Stylish, effective wider front wing works perfectly with XRAY XB2 body and increases front down force.
 

Stylish, effective rear wing works perfectly with XRAY XB2 body. 

Black-coated, Swiss 7075 T6 aluminum front-mid motor plate lowered by 2mm.  

Black-coated, Swiss 7075 T6 aluminum front-mid motor plate lowered by 4mm.  

XRAY XB2 Slipper Eliminator is a direct replacement for the slipper clutch set. Designed and recommended for use with stock motors to reduce rotating mass, reduce weight, and improve power transfer from motor without any power loss.  

Slipper Eliminator disc carrier machined from premium Swiss 7075 T6 aluminum.  

Slipper Eliminator spacer machined from premium Swiss 7075 T6 aluminum. 

Slipper clutch plate machined from premium Swiss 7075 T6 alu.  

Slipper clutch plate with adapter machined from premium Swiss 7075 T6 alu.  

Gear differential cover made from specially-formulated graphite composite mixture for increased strength and lower weight. Perfect balance between reliability and performance. 

Gear differential case with 53T pulley made from specially-formulated graphite composite mixture for increased strength and lower weight. Perfect balance between reliability and performance. 

Gear differential case made from tough composite material. Fits LCG gear box. 

Redesigned XB2 ball differential offers improved performance. Recommended for all XB2 configurations when used on very-low to medium traction dirt or clay surfaces to increase traction. 

SHORT output shaft for #325002 Adjustable Ball Differential for 2.5mm pin, made from world-renowned HUDY Spring Steelâ„¢. 

LONG output shaft for #325002 Adjustable Ball Differential for 2.5mm pin, made from world-renowned HUDY Spring Steelâ„¢. 

Molded ball-differential 53T bevel gear made from tough composite material. 

Special screw for ball-differential external adjustment, made from world-renowned HUDY Spring Steelâ„¢. Suitable for #325002 Adjustable Ball Differential for 2.5mm pin. 

Ball diff nut machined from premium Swiss 7075 T6 and additionally hardened and with a black final surface treatment. 

CNC-machined CVD rear drive shaft (72mm) with 2.5mm pin, made from world-renowned HUDY Spring Steelâ„¢.  

CNC-machined CVD rear drive shaft (73mm) with 2.5mm pin, made from world-renowned HUDY Spring Steelâ„¢.  

Rear wheel axle for large ball-bearings made from world-renowned HUDY Spring Steelâ„¢. Strategically machined for toughness and light weight without compromising strength.  

XRAY precision-molded offset spur gear 69 tooth, 48 pitch for Slipper Eliminator. This spur gear has been strategically lightened to reduce rotating mass. 

XRAY precision-molded offset spur gear 72 tooth, 48 pitch for Slipper Eliminator. This spur gear has been strategically lightened to reduce rotating mass. 

The graphite battery strap is a great part of Multi-Flexâ„¢ system. The top of the graphite strap can be mounted to the rear motor mount via an adjustable linkage which allows the car to flex to its sides but reinforces the car in the longitudinal direction.  

Fully adjustable aluminum and graphite battery holder that allows to use standard hard case batteries of various dimensions from different manufacturers. 

Specially-designed 50g stainless steel weight for placement beneath battery to add weight as low as possible.  

Specially-designed 35g stainless steel weight for placement beneath short battery pack to add weight as low as possible. 

Optional stainless steel 17g weight for front of the XB2 cars.  

Optional stainless steel 17g weight for front-middle of the XB2 cars.  

Optional stainless steel 7g weight for middle of the XB2 cars.  

Molded composite shock ball joint, length 19mm. These ball joints are +2mm longer than standard ball joints, allowing greater suspension downtravel.  

Molded composite shock ball joint, length 21mm. These ball joints are +4mm longer than standard ball joints, allowing greater suspension downtravel.  

High-performance, low-profile aerodynamic body for XB2 designed by XRAY to perfectly fit the car and to work in most track conditions. 

High-performance, low-profile aerodynamic body for XB2 designed by XRAY to perfectly fit the car. Used by the Factory Team in medium to high-traction conditions.  

The optional ultra-lightweight, completely redesigned, high-performance, low-profile Beta 2 body with super-smooth airflow and all-new downforce areas. 

Specially-designed 2WD front wheels with 12mm internal hex. Perfect fit, recommended for high-competition racing.  

Specially-designed 2WD/4WD rear wheels with 12mm internal hex.  

Molded composite 5.8 ball joints for steering & servo linkages. Includes 4 long and 2 short ball joints. 

Differential gears for gear differentials are made from pressed steel, heat treated, and machined for ultra-precision and smooth operation. Includes 2 bevel and 4 satellite gears. 

Polished steel pins for gear differential. Set of 2. 

Alu hardcoated pins for NT1 gear differential are CNC-machined from premium lightweight Swiss 7075 T6 aluminum, hardcoated for extra durability and long life. Set of 2. 

High-performance clutchbell oversized ball-bearings designed and engineered by XRAY. Set of 2. 

XRAY Premium Silicone Oil 100 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 150 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 200 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 250 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 300 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 350 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 500 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 600 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 700 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 800 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 900 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 1000 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 2000 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 5000 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 6000 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

Alu conical shim 3x6x2.0mm. Black color. Set of 10. 

Alu conical shim 3x6x2.0mm. Orange color. Set of 10. 

Anti-roll bar set 1.0mm made from special spring steel material. Stabilizes the front & rear of the car.  

Spring steel anti-roll bar, 1.0mm thick. Marked with no laser-engraved lines for easy identification. Black colour.
 

Spring steel anti-roll bar, 1.1mm thick. Marked with 1 laser-engraved line for easy identification. Black colour.
 

Spring steel anti-roll bar, 1.2mm thick. Marked with 2 laser-engraved lines for easy identification. Black colour. 

Threaded 4.9mm ball end with 5mm thread length for connection to molded ball joints. Set of 2. 

Threaded 4.9mm ball end with 10mm thread lengthfor connection to molded ball joints. Set of 2. 

High-precision 5.75mm ball end with backstop, used for secure steering linkage mounting. 

High-precision eccentric 5.8mm pivot ball allows to mount the shocks in a different angle. Set of 2. 

Clutch spring for slipper clutch, C=45 rating. Black color. 

Diff rings for #365000 Ball Adjustable Differential for XB4 cars. ID x OD x thickness = 17mm x 24.5mm x 1.0mm. Set of 2. 

CNC-machined, premium aircraft aluminum 14mm wheel hubs.  

CNC-machined, premium aircraft aluminum -0.75mm offset wheel hubs, to give narrower track-width.  

CNC-machined, premium aircraft aluminum +0.75mm offset wheel hubs, to give wider track-width.  

CNC-machined, premium aircraft aluminum 12mm wheel hubs with -0.75mm offset for narrower track-width. Strategically machined for optimum strength, balance, and lightness.  

CNC-machined, premium aircraft aluminum 12mm wheel hubs with +0.75mm offset for wider track-width. Strategically machined for optimum strength, balance, and lightness. 

CNC-machined, premium aircraft aluminum 12mm wheel hubs with +1.50mm offset for wider track-width. Strategically machined for optimum strength, balance, and lightness. 

CNC-machined, premium aircraft aluminum 12mm wheel hubs with +2.25mm offset for wider track-width. Strategically machined for optimum strength, balance, and lightness. 

CNC-machined, premium aircraft aluminum 12mm wheel hubs with +3.00mm offset for wider track-width. Strategically machined for optimum strength, balance, and lightness. 

CNC-machined 12mm wheel hubs with +3.75mm offset for wider track-width, made from Swiss 7075 T6.  

High-strength pinion 18T gear made from tough 7075 T6 alu and specially hardcoated for superior strength, light weight, and high durability.  

High-strength pinion 19T gear made from tough 7075 T6 alu and specially hardcoated for superior strength, light weight, and high durability. 

High-strength pinion 20T gear made from tough 7075 T6 alu and specially hardcoated for superior strength, light weight, and high durability. 

High-strength pinion 21T gear made from tough 7075 T6 alu and specially hardcoated for superior strength, light weight, and high durability. 

High-strength pinion 22T gear made from tough 7075 T6 alu and specially hardcoated for superior strength, light weight, and high durability. 

High-strength pinion 23T gear made from tough 7075 T6 alu and specially hardcoated for superior strength, light weight, and high durability. 

High-strength pinion 24T gear made from tough 7075 T6 alu and specially hardcoated for superior strength, light weight, and high durability. 

High-strength pinion 25T gear made from tough 7075 T6 alu and specially hardcoated for superior strength, light weight, and high durability. 

High-strength pinion gear made from tough 7075 T6 aluminum and specially hardcoated for superior strength, light weight, and high durability.  

High-strength pinion gear made from tough 7075 T6 aluminum and specially hardcoated for superior strength, light weight, and high durability.  

High-strength pinion gear made from tough 7075 T6 aluminum and specially hardcoated for superior strength, light weight, and high durability.  

High-strength pinion gear made from tough 7075 T6 aluminum and specially hardcoated for superior strength, light weight, and high durability.  

High-strength pinion gear made from tough 7075 T6 aluminum and specially hardcoated for superior strength, light weight, and high durability.  

High-strength pinion gear made from tough 7075 T6 aluminum and specially hardcoated for superior strength, light weight, and high durability.  

High-strength pinion gear made from tough 7075 T6 aluminum and specially hardcoated for superior strength, light weight, and high durability.  

High-strength pinion gear made from tough 7075 T6 aluminum and specially hardcoated for superior strength, light weight, and high durability.  

High-strength pinion gear made from tough 7075 T6 aluminum and specially hardcoated for superior strength, light weight, and high durability.  

High-strength pinion gear made from tough 7075 T6 aluminum and specially hardcoated for superior strength, light weight, and high durability.  

High-strength pinion gear made from tough 7075 T6 aluminum and specially hardcoated for superior strength, light weight, and high durability.  

High-strength pinion gear made from tough 7075 T6 aluminum and specially hardcoated for superior strength, light weight, and high durability.  

High-strength pinion gear made from tough 7075 T6 aluminum and specially hardcoated for superior strength, light weight, and high durability.  

Optional spur gear for 3-Pad Slipper Clutch. Precision-molded slipper clutch spur gear 75T 48P is made from XRAY's exclusive secret blend of composite material, allowing the gear to be robust enough to handle high-performance brushless motors.  

Optional spur gear for 3-Pad Slipper Clutch. Precision-molded slipper clutch spur gear 78T 48P is made from XRAY's exclusive secret blend of composite material, allowing the gear to be robust enough to handle high-performance brushless motors. 

Precision-molded spur gear 84T is made from XRAY's exclusive secret blend of composite material, allowing the gear to run yet be robust enough to handle high performance brushless motors. 

Optional spur gear for 3-Pad Slipper Clutch. Precision-molded slipper clutch spur gear 87T 48P is made from XRAY's exclusive secret blend of composite material, allowing the gear to be robust enough to handle high-performance brushless motors.  

Set of lower aluminum shock collars for increased reliability. Stylish and lightweight collars are CNC-machined from premium Swiss 7075 T6 aluminum and are strategically lightened. Set of four. Black color. 

Set of shock pistons made from Delrin and molded using super precise moulds. 

Machined steel upper mounting bushing for XB4 alu shock cap. Set of 2. 

Set of molded composite bushings and shims for XB4 alu shock cap. 

Machined aluminum upper shock cap for XB4 shock absorbers. Optional alu upper shock cap offer an increased durability and extended life time.  

Rubber shim for XB4 alu shock cap. Set of 4. 

Complete parts set for assembling 2 front shock absorbers.  

Machined alu front shock bodies.  

Hardened, high-strength front shock shafts are polished for super-smooth operation.  

The springs have been specifically designed to complement the big bore shocks. Set of 2. 

Front progressive springs specifically designed for use with big bore shocks. Set of 2.
 

Optional springs specifically designed to complement the big-bore shocks.  

The springs have been specifically designed to complement the big bore shocks. The spring rate is constant during the entire spring compression. 

The springs have been specifically designed to complement the big bore shocks. 

The springs have been specifically designed to complement the big bore shocks. Set of 2. 

New optional FRONT linear springs are recommended for high-traction tracks. T 

FRONT linear springs have been specifically designed to complement the big-bore shocks.  

FRONT linear springs have been specifically designed to complement the big-bore shocks.  

The springs have been specifically designed to complement the big bore shocks. Set of 2.

 

Rear progressive springs specifically designed for use with big bore shocks. Set of 2.
 

Optional springs specifically designed to complement the big-bore shocks.  

The springs have been specifically designed to complement the big bore shocks. Set of 2. 

The springs have been specifically designed to complement the big bore shocks.  

The springs have been specifically designed to complement the big bore shocks. Set of 2. 

New optional REAR linear springs are recommended for high-traction tracks.  

REAR linear springs have been specifically designed to complement the big-bore shocks.  

REAR linear springs have been specifically designed to complement the big-bore shocks. 

Specially-designed 4WD & 2WD rear wheels with 12mm internal hex. Perfect fit, and perfect for high-competition racing.  

Molded composite servo saver set - extra stiff.  

M3x3 setscrew, hex drive. Set of 10 pieces. 

M3x6 setscrew, hex drive. Set of 10. 

M3x8 setscrew, hex drive. Set of 10 pieces. 

Carbide balls 2.4mm for ball differential. Improved, smoother diff operation over standard steel diff balls.  

High-precision axial thrustbearing for #325002 Adjustable Ball Differential for 2.5mm Pin. 

Set of 12 premium-quality ceramic balls made from extra-hard Si3N4 silicone nitride ceramic. Significantly improves differential lifespan while reducing friction and vibration. Higher RPM capabilities. 

High-quality ball-bearings ID x OD x thickness (mm) = 5x8x2.5mm. Set of 2 pieces. 

New high-speed ball-bearings manufactured specially for XRAY. ID x OD x thickness (mm) = 10x15x4. Set of 2 pieces. 

Flat washer. ID x OD x thickness = 3mm x 6mm x 0.1mm. Set of 10 pieces. 

Rubber o-ring 1.5mm thick x 3mm dia. Set of 10 pieces.