xrayxrayHome XRAY homeXRAY X-shopXRAY X-forumRCAmerica
supportsearchcontactguestbooksite map
newsproductsaboutusworldwide headlines
click to enable quick search
 
Alu Shim 3x6x1.0mm - Black (10)
#303122-K

Alu shims 3x6mm size, 1mm thick. Black color, set of 10. 



T2 Alu Shim 3x6x1.0mm - Orange (10)
#303122-O

Alu shims 3x6mm size, 1mm thick. Orange color, set of 10. 



Alu Shim 3x6x2.0mm - Black (10)
#303123-K

Alu shims 3x6mm size, 2mm thick. Black color, set of 10. 



T2 Alu Shim 3x6x2.0mm - Orange (10)
#303123-O

Alu shims 3x6mm size, 2mm thick. Orange color, set of 10. 



Alu Anti-Roll Bar Pivot ball 5.8mm - Hard Coated (2)
#333451

CNC-machined 5.8mm dia ball joint for anti-roll bar, made from premium lightweight 7075 T6 aluminum. Set of 2. 



Receiver Switch - Set
#336060

Complete receiver switch set for NT1 fits directly into composite receiver case. Pre wired mechanical on/off switch for quick & easy powering/shutdown of onboard electronics. Molded rubber cover protects switch from contamination by fuel and dirt. Comes with Futaba J connectors. 



Receiver Battery Pack Intellect 1400mAh NiMH - 6.0V
#339111

XRAY introduces a new 5-cell (6.0V) inline battery pack made from ultra-high performance Intellect IB1400mAh NiMH cells. These 2/3A cells offer low resistance and will maintain their high voltage under load, allowing them to easily provide power to high-powered servos without a performance decrease.  



XB8'19 Alu Chassis - Swiss 7075 T6 (3mm)
#351113

The XB8 chassis was redesigned to fit both SOFT and HARD composite radio boxes without chassis modification.  



Composite Chassis Side Guard L+R - Soft
#351159-S

The composite side guards protect the car, muffler, and fuel tank from side impacts. The side guards perfectly fit the chassis and seal against dirt. Molded from SOFT composite mixture for increased flex to generate more traction.
 



XB8'16 Graphite Upper Plate
#351348

Graphite front plate is CNC-machined from high-grade carbon graphite, ensuring highest strength with lightest weight.  



XB8 Graphite Front Shock Tower 4.0mm
#352051

Front shock tower CNC-machined from extra-thick 4mm premium-grade graphite for light weight and strength.  



Composite Bearing Hub for Diff (4)
#352070

Molded composite hubs for supporting ball-bearings in diff bulkhead blocks. Set of 4. 



XB8 Composite Front Lower Suspension Arm
#352117

Front lower suspension arm for XB8 made from super-tough, high-tech composite material. Universal design allows the arm to be used on either left or right sides. 

Replaced by XB8 Composite Front Lower Suspension Arm 



XB8 Composite Front Lower Suspension Arm - Graphite
#352120-G

Molded lightweight front LOWER suspension arm made from specially-formulated graphite composite material.  



XB8 Composite Front Lower Suspension Arm - Medium
#352120-M

MEDIUM-hardness front LOWER suspension arm made from high-tech composite material. The exclusive composite mixture used for suspension arms gives a perfect balance between reliability and performance; the suspension arm is rigid enough for a responsive feel, yet soft enough for extreme durability. 



XB8 C-Hub Composite Front Lower Suspension Arm - Medium
#352121

Front lower suspension arm for C-hub suspension molded from medium hardness composite mixture. 



XB8 C-Hub Composite Front Lower Suspension Arm - Graphite
#352121-G

Front lower suspension arm for C-hub suspension molded from specially-formulated graphite composite material.  



XB8 C-Hub Composite Front Lower Suspension Arm - Hard
#352121-H

Front lower suspension arm for C-hub suspension molded from a new hard composite mixture.  



XB8 C-Hub Composite Front Lower Suspens. Arm - Short - Soft
#352121-S

Front lower suspension arm for C-hub suspension molded from soft hardness composite mixture, super-tough, high-tech composite material. 



XB8 Composite Front Upper Arm - Graphite
#352133-G

Molded lightweight front UPPER suspension arm made from specially-formulated graphite composite material. 



XB8 Composite Front Upper Arm - Medium
#352133-M

MEDIUM-hardness front UPPER suspension arm made from high-tech composite material. The exclusive composite mixture used for suspension arms gives a perfect balance between reliability and performance; the suspension arm is rigid enough for a responsive feel, yet soft enough for extreme durability. 



Mounting Ball 6.8mm (2)
#352160

Mounting steel pivot ball 6.8mm dia. Set of 2. 



Steel Eccentric Bushing 1° - V2 (2)
#352174

Eccentric bushing for I.A.C. (Integrated Adjustable Caster). 1° setting (identified by 1 dot) allows for either +1° or -1° caster adjustment depending on the orientation of the bushing. 



Steel Eccentric Bushing 2° - V2 (2)
#352175

Eccentric bushing for I.A.C. (Integrated Adjustable Caster). 2° setting (identified by 2 dots) allows for either +2° or -2° caster adjustment depending on the orientation of the bushing. 



XB8'16 Composite Steering Block - Trailing Axle - Right
#352242

Optional RIGHT steering block with trailing axle makes the car easier to drive with increased forward traction. 



XB8'16 Composite Steering Block - Trailing Axle - Left
#352243

Optional LEFT steering block with trailing axle makes the car easier to drive with increased forward traction.  



XB8'19 PB Composite Steering Block
#352244

Front pivot ball steering block molded from specially formulated composite material. Fits larger outside ball-bearings for increased reliability and life-span. 



XB8'19 PB Composite Steering Block - Graphite
#352244-G

Lightweight yet ultra-strong front pivot ball steering block molded from specially formulated graphite composite material. 



XB8 C-Hub Composite Steering Block LB with Alu Inserts
#352245

Front C-hub steering block molded from specially formulated composite material. Features alu inserts for increased durability. Fits larger outside ball-bearings for increased reliability and life-span. 



Composite C-Hub 16° Right
#352277

Molded composite C-hub for RIGHT steering block. Made from high-tech composite material. Caster pre-set at 16°. For use with matching left-side C-hub #352287.  



Composite C-Hub 16° Left
#352287

Molded composite C-hub for LEFT steering block. Made from high-tech composite material. Caster pre-set at 16°. For use with matching right-side C-hub #352277. 



Steel C-Hub Bushing (2)
#352293

Steel bushing for C-hub steering block. Set of 2. 



XB8'19 Alu Steering Block Plate - Swiss 7075 T6 (L+R)
#352378

Alu steering block plate allows for easy Ackermann position adjustment to help fine-tune the car’s handling in all track conditions. Set of L+R. 



XB8 Front Anti-Roll Bar 1.6mm
#352487

Front anti-roll bar for XB8, XT8 & GTX8 cars, 1.6mm thick.  



XB8 Front Anti-Roll Bar 1.8mm
#352489

Front anti-roll bar for XB8, XT8 & GTX8 cars, 1.8mm thick.  



XB8 Front Anti-Roll Bar 2.0mm
#352490

Front anti-roll bar for XB8, XT8 & GTX8 cars, 2.0mm thick.  



XB8 Front Anti-Roll Bar 2.2mm
#352492

Front anti-roll bar for XB8, 2.2mm thick. Laser-engraved for easy identification. 



XB8 Front Anti-Roll Bar 2.3mm
#352493

Front anti-roll bar for XB8, 2.3mm thick. Laser-engraved for easy identification.
 



XB8 Front Anti-Roll Bar 2.5mm
#352495

Front anti-roll bar for XB8, 2.5mm thick. Laser-engraved for easy identification. 



XB8 Front Anti-Roll Bar 2.6mm
#352496

Front anti-roll bar for XB8, 2.6mm thick. Laser-engraved for easy identification. 



Front Anti-Roll Bar 2.8mm
#352498

Front anti-roll bar for GTX, 2.8mm thick. Laser-engraved for easy identification. 



Ball Stud 6.8mm (4)
#352652

Premium quality 6.8mm ball stud made from special HUDY Spring Steel™. Additionally heat treated for maximum strength, reliability, and long life. Set of 4. 



Ball Stud 6.8mm with Backstop L=6mm - M3x8 (2)
#352658

Ball stud 6.8mm with backstop, made from steel.  



Alu Countersunk Shim for Ball Stud (10)
#352680

Machined alu countersunk shims for use with ball stud. Set of 10. 



XB9 Composite Rear Lower Suspension Arm
#353115

Rear lower suspension arm for XB9 made from super-tough high-tech composite material. Smart, universal design allows the same front arm to be used on both left and right sides. 



Composite Rear Lower Suspension Arm - Graphite
#353116-G

Molded lightweight composite rear lower suspension arm made from specially-formulated graphite composite material.  



Composite Rear Lower Suspension Arm - X-Hard
#353116-XH

Rear lower suspension arms molded from an extra-hard composite mixture. 



Alu Mounting Ball 6.8 - Hard Coated (4)
#353161

CNC-machined 6.8mm dia mounting pivot ball with shoulder,made from premium lightweight 7075 T6 aluminum. Set of 4. 



Alu Pivot Ball 6.8 - Hard Coated (4)
#353171

CNC-machined 6.8mm dia mounting pivot ball,made from premium lightweight 7075 T6 aluminum. Set of 4. 



XB8 Graphite Rear Lower Arm Plate 1.6mm (2)
#353191

Optional graphite rear lower arm plate allows for stiffer the arms and makes the car more stable and easier to drive under high-grip conditions. 



XB8'18 Composite Rear Mud Protector (L+R)
#353193

Lightweight composite mud guard for rear suspension arms protects the rear drivetrain in wet & dirty track conditions. Set of L+R. 



XB8 Graphite Braces for Chassis Side Guards - Set
#353250

Chassis side guard brace CNC-machined from high-grade graphite material.  



Graphite Insert for Medium Rear Composite Brace - Set
#353280

Reinforcement insert for rear composite brace, stiffens the composite brace and chassis for high traction tracks.  



Alu Rear Lower Suspension Holder +2mm - Rear (7mm) - 7075 T6
#353321

With this suspension holder, the roll center is moved by +2mm to allow for super fine roll-center adjustment.  



XB8 Composite Rear Upright LB
#353354

The rear uprights were redesigned and feature larger outside 8x16x5mm ball-bearings for increased reliability and life-span.  



XB8 Composite Rear Upright LB - Graphite
#353354-G

Lightweight yet ultra-strong rear upright molded from special graphite composite material.  



Rear Anti-Roll Bar 1.8mm
#353418

Rear anti-roll bar for XB8, XT8 & GTX8 cars, 1.8mm thick. 



Rear Anti-Roll Bar 2.0mm
#353420

Rear anti-roll bar for XB8, XT8 & GTX8 cars, 2.0mm thick. 



Rear Anti-Roll Bar 2.2mm
#353422

Rear anti-roll bar 2.2mm thick. 



Rear Anti-Roll Bar 2.4mm
#353424

Rear anti-roll bar 2.4mm thick. 



Rear Anti-Roll Bar 2.5mm
#353425

Rear anti-roll bar for XB8 & XT8, 2.5mm thick. Laser-engraved for easy identification.
 



Rear Anti-Roll Bar 2.8mm
#353428

Rear anti-roll bar 2.8mm thick. 



Rear Anti-Roll Bar 3.0mm
#353430

Rear anti-roll bar 3.0mm thick. 



Rear Anti-Roll Bar 3.2mm
#353432

Rear anti-roll bar 3.2mm thick. 



Rear Wing
#353510

Aerodynamic rear wing molded from a very flexible composite mixture. All edges in critical areas are reinforced to prevent breakage. 



Composite Rear Wing - White
#353511

Aerodynamic rear wing molded from flexible composite material.  



Composite Rear Wing - Yellow
#353511-Y

Aerodynamic rear wing molded from flexible composite material.  



Lexan Rear Wing - 1/8 Off-road
#353512

XRAY super lighweight 1/8 off-road lexan wing designed for a perfect fit to XB8 and working in conjuction with the XRAY off-road bodies.  



Rear Wing - Black
#353515

Aerodynamic rear wing (black) molded from a very flexible composite mixture. All edges in critical areas are reinforced to prevent breakage. 



Rear Wing - Orange
#353516

Aerodynamic rear wing (orange) molded from a very flexible composite mixture. All edges in critical areas are reinforced to prevent breakage. 



Rear Wing - Pink
#353518

Aerodynamic rear wing (pink) molded from a very flexible composite mixture. All edges in critical areas are reinforced to prevent breakage. 



Rear Wing - Yellow
#353519

Aerodynamic rear wing (yellow) molded from a very flexible composite mixture. All edges in critical areas are reinforced to prevent breakage. 



Alu Rear Wing Shim (2)
#353561

Alu rear wing shim for XB and XT series buggies and truggies. Provides additional support to prevent wing from pulling off from mounting screws. Set of 2. 



Central Differential - Large - Set
#355013

Complete CENTER differential set with larger diff gears for increased traction. Perfect play between gears and larger oil volume prevents the diff from overheating, extending its lifespan.  



Differential Case - V2 - Graphite
#355022-G

Rubber-sealed differential case made from new specially-formulated graphite composite material. Lighter, tougher material with higher temperature and wear resistance, also holds the screws better secured in place. 



Center Differential Case - V2
#355023

Large volume rubber-sealed differential housings made from tough composite give perfect fit and no vibration.  



Center Differential Case - V2 - Graphite
#355023-G

Large volume rubber-sealed CENTER differential case made from new specially-formulated graphite composite material. Lighter, tougher material with higher temperature and wear resistance, also holds the screws better secured in place. 



Front/Rear Differential Large Bevel Gear 44T
#355044

44-tooth large external bevel gear manufactured from HUDY Steel for drive ratio adjustment.  



Front/Rear Differential Large Bevel Gear 45T
#355045

45-tooth large external bevel gear manufactured from HUDY Steel for drive ratio adjustment.  



Center Diff Spur Gear 48T
#355048

48-tooth large external spur gear for center differential, precision-machined on a special gear machine. Must be used with Center Diff Shimming Plates (#354032) and Alu. Center Diff Mounting Plate 7075 T6 (3mm) (#354055) because of larger diameter. 



Center Diff Spur Gear 47T
#355049

47-tooth large external spur gear for center differential, precision-machined on a special gear machine. Must be used with Center Diff Shimming Plates (#354032) and Alu. Center Diff Mounting Plate 7075 T6 (3mm) (#354055) because of larger diameter. 



Center Diff Spur Gear 45T
#355051

45-tooth large external spur gear for center differential. Precision machined on a special gear machine. 



Center Diff Spur Gear 44T
#355052

44-tooth large external spur gear for center differential. Precision machined on a special gear machine. 



Center Differential Spur Gear 46T - Large
#355056

46-tooth large external spur gear for center differential. 



Center Differential Spur Gear 47T - Large
#355057

47-tooth large external spur gear for center differential. 



Center Differential Spur Gear 48T - Large
#355058

48-tooth large external spur gear for center differential. 



Center Diff. Pin (2)
#355082

Precision-ground polished steel pin 3.5 x 33 mm. for internal satellite gears used in large center differential #355013. Set of 2 



Extreme Heat Resistant Center Diff Pin with Inserts (2+4)
#355083

Precision-ground polished steel pin 3.5 x 33 mm for internal satellite gears used in large center differential #355013.  



Extreme Heat Resistant F/R Alu Diff Pin with Inserts (2+4)
#355086

Precision-ground polished alu pin 3.5 x 26.6 mm for internal satellite gears used in large front & rear differentials #355004 and #355005. 



Extreme Heat Resist. Center Alu Diff Pin with Inserts (2+4)
#355087

Precision-ground polished alu pin 3.5 x 33 mm for internal satellite gears used in large center differential #355013.  



Center Differential Gasket (2)
#355092

Sealing gasket for center differential housing. Fits #355013. Set of 4. 



XRAY XB8 Active Diff™ 46T
#355105

Complete Active Differential™ set for XB8.  



XRAY XB8 Active Center Differential™ 46T
#355106

The unique XRAY Center Active Differential™ is a high-performance, adjustable gear differential that vastly improves the buggy’s speed and handling characteristics. 



Bevel Drive Gear 12T
#355110

12-tooth bevel drive gear for front/rear differential. Precision machined on a special gear machine. 



Active Differential Spur Gear 46T
#355146

The 46T diff bevel gear for XRAY Active Diff™ is machined from special HUDY steel material which has been specially developed for gear-type products, additionally hardened and precision ground to fit the tightest tolerance requirements for perfect fit with the diff outdrives.  



Active Center Differential Spur Gear 46T
#355150

46-tooth large bevel gear for Active Center Differential™ is machined from special HUDY steel material which has been specially developed for gear-type products, additionally hardened and precision ground to fit the tightest tolerance requirements for perfect fit with the diff outdrives.  



Active Diff. Outdrive Adapter - Lightweight - HSS™ (2)
#355163

Lightweight CNC-machined diff outdrive adapters for XB8 Active Diff™. 



Alu CVD Drive Axle - Hardcoated (4)
#355212

CNC-machined CVD drive axle made from premium lightweight Swiss 7075 T6 hardcoated aluminum. 



CVD Adjustable Drive Axle - HUDY Spring Steel™ (2)
#355215

Drive axle for XRAY adjustable drive shafts. Drive shaft length adjustment uses 4 different connecting hole positions at the drive axle end to allow changes to overall driveshaft length.  



Universal Drive Shaft - Hudy Spring Steel™
#355222

All-new front & rear universal drive shafts are used on the XB8 to generate more traction and have less resistance in the front when maximum steering angle is applied.

 



Alu Wheel Axle Offset “+1mm” - Hard Coated
#355251

Hardcoated aluminum wheel axle with +1mm offset. Using these wheel axles will increase the overall track width by 2mm, making the car more stable and easier to drive.  



Alu Wheel Axle Offset “+2mm” - Hard Coated
#355252

Hardcoated aluminum wheel axles with +2mm offset. Using these wheel axles will increase the overall track width by 4mm, making the car more stable and easier to drive. Set of 2. Wheel axles can be mounted in both front and rear. 



Wheel Nut With Cover - Hard Coated (2)
#355265

Hardcoated aluminum wheel nut with cover for XB8 wheels. Using these wheel nuts, you will never have problems anymore with dirt getting into the wheel axle assembly! Fits front and rear wheel axles.  



Pin with Flat Spot 3x16.8 (2)
#355292

Polished chrome pin with flat spot, 3.0 x 16.8mm. Specially hand-ground for maximum precision. Set of 2. 



Front Universal Central Drive Shaft - Spring Steel™ - Set
#355426

Optional front universal central drive shaft, CNC-machined from world-renowned HUDY Spring Steel™. Ensures more free movement of the drivetrain and improves traction.

 



Rear Universal Central Drive Shaft - Spring Steel™ - Set
#355626

Optional rear universal central drive shaft, CNC-machined from world-renowned HUDY Spring Steel™. Ensures more free movement of the drivetrain and improves traction. 



Steel Pinion Gear 12T
#355712

High-performance 12T pinion gear, manufactured from special steel for toughness and durability. 



Steel Pinion Gear 13T
#355713

High-performance 13 tooth pinion gear, manufactured from special steel for toughness and durability with precise tolerances and assures unparalleled concentricity. Precision-cut teeth with chamfered edges. Run-in for smooth operation. Includes M4x4 set screw. 



Steel Pinion Gear 14T
#355714

High-performance 14 tooth pinion gear, manufactured from special steel for toughness and durability with precise tolerances and assures unparalleled concentricity. Precision-cut teeth with chamfered edges. Run-in for smooth operation. Includes M4x4 set screw. 



Steel Pinion Gear 15T
#355715

High-performance 15 tooth pinion gear, manufactured from special steel for toughness and durability with precise tolerances and assures unparalleled concentricity. Precision-cut teeth with chamfered edges. Run-in for smooth operation. Includes M4x4 set screw. 



Steel Pinion Gear 16T
#355716

High-performance 16 tooth pinion gear, manufactured from special steel for toughness and durability with precise tolerances and assures unparalleled concentricity. Precision-cut teeth with chamfered edges. Run-in for smooth operation. Includes M4x4 set screw. 



Steel Pinion Gear 17T
#355717

High-performance 17 tooth pinion gear, manufactured from special steel for toughness and durability with precise tolerances and assures unparalleled concentricity. Precision-cut teeth with chamfered edges. Run-in for smooth operation. Includes M4x4 set screw. 



Self-Adhesive Rubber 1.5x13x51.5mm (2)
#356161

Set of two replacement self-adhesive rubbers. These rubber straps are used to prevent the battery from moving. 



Brass Adjusting Nut M15x1 (2)
#357253

Optional brass M15 adjusting nut for capturing pivot balls in front steering blocks. The additional weight nuts are more than 3x heavier than standard alu adjusting nut. Great and handy for weight balance adjustment. Set of 2. Fits XB8.  



Composite Ball Cup 13.9mm (2)
#357254

Molded composite ball cup for cushioning alu M15 alu adjusting nut against 13.9mm pivot ball. Set of 2. Fits XB8. 



Composite Set of Shims for Shocks - Delrin (2)
#358018

Set of composite molded shims for XB8 shocks. 



2-Way Flow Delrin Shock Piston 5-H.(1.5)+2-H.(1.0) (2)
#358027

Set of composite molded shock pistons for two shock absorbers with five 1.5mm holes & two 1.0mm holes.  



2-Way Flow Delrin Shock Piston 6-H.(1.3)+2-H.(1.1) (2)
#358028

Set of composite molded shock pistons for two shock absorbers with six 1.3mm holes & two 1.1mm holes. 



2-Way Flow Delrin Shock Piston 6-H.(1.4)+2-H.(1.1) (2)
#358029

Set of composite molded shock pistons for two shock absorbers with six 1.4mm holes & two 1.1mm holes. 



2-Way Flow Delrin Shock Piston 8-H.(1.2)+2-H.(1.2) (2)
#358030

Set of composite molded shock pistons for two shock absorbers with eight 1.2mm holes & two 1.2mm holes. 



2-Way Flow Delrin Shock Piston 8-H.(1.3)+2-H.(1.2) (2)
#358031

Set of composite molded shock pistons for two shock absorbers with eight 1.3mm holes & two 1.2mm holes.  



Composite Shock Bushing & Shim (2+2)
#358043

Set of composite molded bushing and shims for XB8, GTX & XT8 cars. 



XB8 Alu Shock Cap Nut with Vent Hole - Black Coated (2)
#358054

CNC-machined 1-piece alu shock cap for XB8, made from premium lightweight 7075 T6 aluminum. Features a small vent hole that makes shock assembly very predictable and easy, allowing excess shock oil to easily escape. Machined interior ridges ensure proper placement and sealing of the super-soft silicone membrane.  



XB8 Alu Shock Cap Nut 4x Bleed Hole - Black Coated (2)
#358055

CNC-machined 1-piece alu shock cap made from premium lightweight 7075 T6 aluminum.  



XB8 Alu Shock Cap Nut with Vent Hole - Black Coated (2)
#358056

CNC-machined 1-piece alu shock cap for XB8 Zero Rebound Shocks, made from premium lightweight 7075 T6 aluminum. 



Shock Rubber Membrane (4)
#358082

Shock membrane for shock absorbers, made of soft molded rubber. The new shock membranes are now wider to fit the new big-bore shocks.  



Shock Rubber Membrane Ribbed (4)
#358083

Newly designed improved shock membranes provide more consistent feel during long finals with no sign of fade. Shock membrane for shock absorbers, made of soft molded rubber. The new shock membranes are wider to fit the big-bore shocks. The material has been also improved to guarantee the same damping characteristics from the beginning of the race to the end even after excessive loads. Set of 4. 



XB8 Shock Rubber Membrane Bottom Ribbed (4)
#358084

Shock membrane for XB8 shocks, made from soft molded rubber. Features internal bottom ribs to maintain shape. The specially-formulated rubber material of the shock membrane ensures equal damping characteristics from the beginning of the race to the end, even after extreme operation. Set of 4. Fits XB8. 



XB8 Shock Rubber Valve (4)
#358085

Rubber valve for 2-way flow in shock pistons. Suitable for shocks in XB8, XT8, and GTX. 



XB8 Shock Rubber Membrane Cell - Medium (4)
#358087-M

Shock membrane for XB8 shocks, made from medium molded rubber. The cell shock membranes have less air gap that helps to generate more grip of the car.  



XB8 Shock Rubber Membrane Cell - Soft (4)
#358087-S

Shock membrane for XB8 shocks, made from soft molded rubber. The cell shock membranes have less air gap that helps to generate more grip of the car.  



Shock Foam Insert (4)
#358090

Foam inserts for XRAY shocks, go between shock upper mount and rubber membrane. Prevents membrane collapse. Provides slightly more steering, and more stability when landing from big jumps.  



XB8 Front Shock Absorbers Zero Rebound - Complete Set (2)
#358107

Complete set of Zero Rebound Front Shock Absorbers for XB8. Zero Rebound Shocks can be set to allow less rebound than standard shock absorbers, decreasing responsiveness and improving bump absorption on bumpy tracks. 



XB8 Alu Front Shock Body Zero Rebound (2)
#358125

CNC-machined alu front shock body for XB8 Zero Rebound Shocks, made from premium lightweight 7075 T6 aluminum.  



XB8 Front Shock Shaft 58.5mm (2)
#358164

Thick, robust 3.5mm front shock shaft, precisely machined from special high-tensile steel and hand-ground for a super-smooth finish to ensure smooth movement in the shock body.  



XB8 Front Shock Shaft 61mm (2)
#358165

Thick, robust 3.5mm front shock shaft, precisely machined from special high-tensile steel and hand-ground for a super-smooth finish to ensure smooth movement in the shock body. 



XRAY Front Spring Set Progressive C=0.7-0.8 (2)
#358174

New progressive springs marked 0.7-0.8 are soft at the beginning of the compression (similar to hardness 0.7) but become harder as the spring is compressed more in the middle, with hardness 0.8 at the end. Pearl-grey color for easy identification. Set of 2. 



Front Spring Set C = 0.65 - White (2)
#358182

New ultimate-match front shock springs (C = 0.65) for front shocks. White color. Set of 2. 



Front Spring Set C = 0.70 - Grey (2)
#358183

New ultimate-match front shock springs (C = 0.70) for front shocks. Grey color. Set of 2. 



Front Spring Set C = 0.75 - Silver (2)
#358184

New ultimate-match front shock springs (C = 0.75) for front shocks. Silver color. Set of 2. 



Front Spring Set C = 0.80 - Light-Blue (2)
#358185

New ultimate-match front shock springs (C = 0.80) for front shocks. Light blue color. Set of 2. 



Front Spring Set C = 0.86 - Blue (2)
#358186

New ultimate-match front shock springs (C = 0.86) for XRAY front shocks. Blue color. Set of 2. 



Front Spring Set C = 0.92 - Violet (2)
#358187

New ultimate-match front shock springs (C = 0.92) for XRAY front shocks. Violet color. Set of 2. 



Front Spring Set C = 0.98 - Purple (2)
#358188

New ultimate-match front shock springs (C = 0.98) for XRAY front shocks. Purple color. Set of 2. 



XB8 Rear Shock Absorbers Zero Rebound - Complete Set (2)
#358207

Complete set of Zero Rebound Rear Shock Absorbers for XB8. 



XB8 Alu Rear Shock Body Zero Rebound (2)
#358226

CNC-machined alu rear shock body for XB8 Zero Rebound Shocks, made from premium lightweight 7075 T6 aluminum.  



XB8 Rear Shock Shaft 67.5mm (2)
#358264

Thick, robust 3.5mm rear shock shaft, precisely machined from special high-tensile steel and hand-ground for a super-smooth finish to ensure smooth movement in the shock body.  



XB8 Rear Shock Shaft 71.5mm (2)
#358265

Thick, robust 3.5mm rear shock shaft, precisely machined from special high-tensile steel and hand-ground for a super-smooth finish to ensure smooth movement in the shock body.  



XRAY Rear Spring Set Progressive C=0.5-0.6 (2)
#358274

New progressive springs marked 0.5-0.6 are soft at the beginning of the compression (hardness 0.5) but become harder as the spring is compressed more in the middle, with hardness 0.6 at the end. Pearl-grey color for easy identification. Set of 2. 



XRAY Progressive Springs - Soft - 1 stripe (2)
#358275

New SOFT progressive springs are soft at the beginning of the compression but become harder as the spring is compressed more in the middle, with highest hardness at the end. Marked with ONE stripe for easy identification. 



XRAY Progressive Springs - Soft-Medium - 2 stripes (2)
#358276

New SOFT-MEDIUM progressive springs are soft at the beginning of the compression but become harder as the spring is compressed more in the middle, with highest hardness at the end. Marked with TWO stripes for easy identification. 



XRAY Progressive Springs - Medium - 3 stripes - V2 (2)
#358277

New MEDIUM progressive springs are soft at the beginning of the compression but become harder as the spring is compressed more in the middle, with highest hardness at the end. Marked with THREE stripes for easy identification. 



XRAY Progressive Springs - Medium-Hard - 4 stripes (2)
#358278

MEDIUM-HARD progressive springs have medium firmness at the beginning of the compression but become firmer as the spring is compressed more in the middle, with hard firmness at the end. 



XRAY Long Progressive Springs - Soft-Medium - 2 stripes - V2 (2)
#358279

Long progressive springs are soft at the beginning of the compression but become harder as the spring is compressed more in the middle, with highest hardness at the end.  



XRAY Long Progressive Springs - Medium - 3 stripes - V2 (2)
#358280

Long progressive springs are soft at the beginning of the compression but become harder as the spring is compressed more in the middle, with highest hardness at the end.  



XRAY Long Progressive Springs - Medium-Hard - 4 stripes (2)
#358281

MEDIUM-HARD long progressive springs have medium firmness at the beginning of the compression but become firmer as the spring is compressed more in the middle, with hard firmness at the end.  



Rear Spring Set C = 0.47 - White (2)
#358282

New ultimate-match rear shock springs (C = 0.47) for XRAY rear shocks. White color. Set of 2. 



Rear Spring Set C = 0.50 - Grey (2)
#358283

New ultimate-match rear shock springs (C = 0.50) for XRAY rear shocks. Grey color. Set of 2. 



Rear Spring Set C = 0.53 - Silver (2)
#358284

New ultimate-match rear shock springs (C = 0.53) for XRAY rear shocks. Silver color. Set of 2. 



Rear Spring Set C = 0.57 - Light-Blue (2)
#358285

New ultimate-match rear shock springs (C = 0.57) for XRAY rear shocks. Light blue color. Set of 2. 



Rear Spring Set C = 0.61 - Blue (2)
#358286

New ultimate-match rear shock springs (C = 0.61) for XRAY rear shocks. Blue color. Set of 2. 



Rear Spring Set C = 0.65 - Violet (2)
#358287

New ultimate-match rear shock springs (C = 0.65) for XRAY rear shocks. Violet color. Set of 2. 



Rear Spring Set C = 0.70 - Purple (2)
#358288

New ultimate-match rear shock springs (C = 0.70) for XRAY rear shocks. Purple color. Set of 2. 



XRAY Front Spring 69mm - 4 Dots (2)
#358316

New FRONT progressive springs are slightly progressive, but under more compression they change characteristics to become more linear.  



XRAY Front Spring 69mm - 5 Dots (2)
#358317

FRONT progressive springs. Slightly progressive, but under more compression they change characteristics to become more linear.  



XRAY Rear Spring 85mm - 4-Dots (2)
#358336

New REAR progressive springs are slightly progressive, but under more compression they change characteristics to become more linear.  



4-Shoe Clutch - Complete Set
#358400

Complete set of 4-shoe clutch system includes flywheel, lightweight medium aluminum clutch shoes, gold (soft) clutch springs, assembly screws, flywheel collar, and flywheel nut. 



3BB Clutch Bell 13T + 3x Ball-Bearings
#358413

13-tooth clutch bell made from HUDY steel, precision-machined on a special gear machine. 



3BB Clutch Bell 13T - Lightweight + 3x Ball-Bearings
#358413-L

13-tooth clutch bell made from HUDY steel, precision-machined on a special gear machine. 



4-Shoe Flywheel + Flywheel Collar
#358430

Alu flywheel for 4-shoe clutch made from Swiss 7075 T6 alu and hardcoated for extra durability. 



4-Shoe Flywheel Nut - HUDY Spring Steel™
#358450

CNC-machined flywheel nut for 4-shoe clutch. Made from HUDY Spring Steel™. 



4-Shoe Alu Clutch Shoe - Soft (4)
#358458

Aluminum Soft clutch shoes for 4-shoe clutch. Set of 4. 



4-Shoe Alu Clutch Shoe - Medium (4)
#358459

Aluminum Medium clutch shoes for 4-shoe clutch. Set of 4. 



4-Shoe Alu Clutch Shoe - Hard (4)
#358460

Aluminum Hard clutch shoes for 4-shoe clutch. Set of 4. 



4-Shoe Graphite Clutch Shoe - Long Life (4)
#358461

Graphite clutch shoe made from special graphite mixture material.  



4-Shoe Clutch Springs - Gold - Soft (4)
#358480

Soft clutch springs for 4-shoe clutch. Softer spring allows for earlier engagement. 



4-Shoe Clutch Springs - Grey - Medium (4)
#358481

Medium clutch springs for 4-shoe clutch. Medium spring allows for good overall engagement point, though with slightly different characteristics in comparison with the soft springs. 



4-Shoe Clutch Springs - Silver - Hard (4)
#358482

Hard clutch springs for 4-shoe clutch. Hard spring allows for later engagement point. 



4-Shoe Screw Pin - HUDY Spring Steel™
#358499

Easy to install assembly screws for 4-shoe clutch system. Set of 4pcs. 



Shim for Electric Motor
#358790

Shim for long-shaft electric motors (those with shafts longer than 18mm measured from the end of the shaft to motor cover) such as Tekin. 



XRAY Premium Silicone Oil 100 cSt
#359210

XRAY Premium Silicone Oil 100 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 



XRAY Premium Silicone Oil 150 cSt
#359215

XRAY Premium Silicone Oil 150 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 



XRAY Premium Silicone Oil 200 cSt
#359220

XRAY Premium Silicone Oil 200 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 



XRAY Premium Silicone Oil 250 cSt
#359225

XRAY Premium Silicone Oil 250 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 



XRAY Premium Silicone Oil 300 cSt
#359230

XRAY Premium Silicone Oil 300 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 



XRAY Premium Silicone Oil 400 cSt
#359240

XRAY Premium Silicone Oil 400 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 



XRAY Premium Silicone Oil 500 cSt
#359250

XRAY Premium Silicone Oil 500 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 



XRAY Premium Silicone Oil 550 cSt
#359255

XRAY Premium Silicone Oil 550 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 



XRAY Premium Silicone Oil 600 cSt
#359260

XRAY Premium Silicone Oil 600 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 



XRAY Premium Silicone Oil 700 cSt
#359270

XRAY Premium Silicone Oil 700 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 



XRAY Premium Silicone Oil 800 cSt
#359280

XRAY Premium Silicone Oil 800 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 



XRAY Premium Silicone Oil 900 cSt
#359290

XRAY Premium Silicone Oil 900 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 



XRAY Premium Silicone Oil 1000 cSt
#359301

XRAY Premium Silicone Oil 1000 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 



XRAY Premium Silicone Oil 2000 cSt
#359302

XRAY Premium Silicone Oil 2000 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 



XRAY Premium Silicone Oil 6000 cSt
#359306

XRAY Premium Silicone Oil 6000 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 



XRAY Premium Silicone Oil 8000 cSt
#359308

XRAY Premium Silicone Oil 8000 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 



XRAY Premium Silicone Oil 10 000 cSt
#359310

XRAY Premium Silicone Oil 10 000 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 



XRAY Premium Silicone Oil 15 000 cSt
#359315

XRAY Premium Silicone Oil 15 000 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 



XRAY Premium Silicone Oil 20 000 cSt
#359320

XRAY Premium Silicone Oil 20 000 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 



XRAY Premium Silicone Oil 30 000 cSt
#359330

XRAY Premium Silicone Oil 30 000 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 



XRAY Premium Silicone Oil 40 000 cSt
#359340

XRAY Premium Silicone Oil 40 000 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 



XRAY Premium Silicone Oil 50 000 cSt
#359350

XRAY Premium Silicone Oil 50 000 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 



XRAY Premium Silicone Oil 60 000 cSt
#359360

XRAY Premium Silicone Oil 60 000 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 



XRAY Premium Silicone Oil 80 000 cSt
#359380

XRAY Premium Silicone Oil 80 000 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 



XRAY Premium Silicone Oil 100 000 cSt
#359392

XRAY Premium Silicone Oil 100 000 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 



XRAY Premium Silicone Oil 150 000 cSt
#359394

XRAY Premium Silicone Oil 150 000 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 



XRAY Premium Silicone Oil 200 000 cSt
#359396

XRAY Premium Silicone Oil 200 000 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 



XRAY Premium Silicone Oil 300 000 cSt
#359398

XRAY Premium Silicone Oil 300 000 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 



XRAY XB8'16 Body
#359710

All-new redesigned XB8 body has been dramatically improved in all aspects: better aerodynamics, increased downforce & side stability, improved landings, and significantly increased rear downforce make the XB8’16 racing body unbeatable in performance design.  



XB8 Body High-Speed - Lightweight for 1/8 Off-Road Buggy
#359712

Lightweight version of XRAY-designed high-speed body for XB8 and XB8E.  



Wheels Starburst - White (4)
#359800

Stylish XRAY Starburst wheels (white) are molded from light but very durable material. Set of 4. 



Wheels Starburst - Orange (4)
#359806

Stylish XRAY Starburst wheels (orange) are molded from light but very durable material. Set of 4. 



Wheels Starburst - Pink (4)
#359808

Stylish XRAY Starburst wheels (pink) are molded from light but very durable material. Set of 4. 



Wheels Starburst - Yellow (4)
#359809

Stylish XRAY Starburst wheels (yellow) are molded from light but very durable material. Set of 4. 



Connecting Cable Receiver/Batt. Pack
#389135

Connection cable for plugging receiver battery pack into the receiver. Standard Futaba J connector on receiver end, micro battery connector on the battery end. 



XRAY XB8 Sticker for Body - White
#397359

Set of black & white transparent XRAY XB8 body stickers printed on premium quality, self-adhesive material that is very easy to apply. 



Hex Screw SH M4x7 With Hex In Bottom (4)
#902407

M4x7 button-head machine screw, hex drive with hex also in the bottom. This screw can be used as optional downstop screw for XB8 kits.  



Screw Phillips 3.0x14 (10)
#905314

M3.0x14 pan-head screw, self-tapping, Phillips drive. Set of 10 pieces. 



Ball-Bearing 13x19x4 Rubber Sealed - Oil (2)
#941319

New high-speed ball-bearings manufactured specially for XRAY. ID x OD x thickness (mm) = 13x19x4. Set of 2 pieces. 



Ball-Bearing 13x19x4 Rubber & Steel Sealed - Grease (2)
#941320

New high-speed ball-bearings manufactured specially for XRAY XB808. Sealed with rubber seal from one side and with steel seal from other side. ID x OD x thickness (mm) = 13x19x4. Set of 2 pieces. 



Washer S 6x18x0.3 (10)
#964061

Flat washer. ID x OD x thickness = 6mm x 18mm x 0.3mm. Set of 10. 



Washer S 6x18x0.5 (10)
#964062

Flat washer. ID x OD x thickness = 6mm x 18mm x 0.5mm. Set of 10. 



Washer S 6x10x0.2 (10)
#964063

Flat washer. ID x OD x thickness = 6mm x 10mm x 0.2mm. Set of 10. 



Washer S 6x10x0.3 (10)
#964064

Flat washer. ID x OD x thickness = 6mm x 10mm x 0.3mm. Set of 10. 



ID Product Name Released
352174 Steel Eccentric Bushing 1° - V2 (2) Aug. 01, 2019
352175 Steel Eccentric Bushing 2° - V2 (2) Aug. 01, 2019
352121-S XB8 C-Hub Composite Front Lower Suspens. Arm - Short - Soft Jun. 27, 2019
358107 XB8 Front Shock Absorbers Zero Rebound - Complete Set (2) Jun. 12, 2019
358207 XB8 Rear Shock Absorbers Zero Rebound - Complete Set (2) Jun. 12, 2019
358400 4-Shoe Clutch - Complete Set May 31, 2019
358018 Composite Set of Shims for Shocks - Delrin (2) May 13, 2019
352121-G XB8 C-Hub Composite Front Lower Suspension Arm - Graphite May 07, 2019
352121 XB8 C-Hub Composite Front Lower Suspension Arm - Medium Apr. 26, 2019
352244-G XB8'19 PB Composite Steering Block - Graphite Apr. 24, 2019
353354-G XB8 Composite Rear Upright LB - Graphite Apr. 24, 2019
358125 XB8 Alu Front Shock Body Zero Rebound (2) Apr. 10, 2019
358226 XB8 Alu Rear Shock Body Zero Rebound (2) Apr. 10, 2019
355086 Extreme Heat Resistant F/R Alu Diff Pin with Inserts (2+4) Mar. 25, 2019
355087 Extreme Heat Resist. Center Alu Diff Pin with Inserts (2+4) Mar. 25, 2019
358056 XB8 Alu Shock Cap Nut with Vent Hole - Black Coated (2) Mar. 21, 2019
358265 XB8 Rear Shock Shaft 71.5mm (2) Mar. 21, 2019
358087-M XB8 Shock Rubber Membrane Cell - Medium (4) Feb. 21, 2019
358413 3BB Clutch Bell 13T + 3x Ball-Bearings Feb. 19, 2019
358413-L 3BB Clutch Bell 13T - Lightweight + 3x Ball-Bearings Feb. 19, 2019