Alu shims 3x6mm size, 1mm thick. Black color, set of 10. 

Alu shims 3x6mm size, 1mm thick. Orange color, set of 10. 

Alu shims 3x6mm size, 2mm thick. Black color, set of 10. 

Alu shims 3x6mm size, 2mm thick. Orange color, set of 10. 

CNC-machined 5.8mm dia ball joint for anti-roll bar, made from premium lightweight 7075 T6 aluminum. Set of 2. 

Complete receiver switch set for NT1 fits directly into composite receiver case. Pre wired mechanical on/off switch for quick & easy powering/shutdown of onboard electronics. Molded rubber cover protects switch from contamination by fuel and dirt. Comes with Futaba J connectors. 

XRAY introduces a new 5-cell (6.0V) inline battery pack made from ultra-high performance Intellect IB1400mAh NiMH cells. These 2/3A cells offer low resistance and will maintain their high voltage under load, allowing them to easily provide power to high-powered servos without a performance decrease.  

The XB8 chassis was redesigned to fit both SOFT and HARD composite radio boxes without chassis modification.  

The composite side guards protect the car, muffler, and fuel tank from side impacts. The side guards perfectly fit the chassis and seal against dirt. Molded from SOFT composite mixture for increased flex to generate more traction.
 

Carbon front plate is CNC-machined from high-grade carbon, ensuring highest strength with lightest weight.  

Front shock tower CNC-machined from extra-thick 4mm premium-grade graphite for light weight and strength.  

Molded composite hubs for supporting ball-bearings in diff bulkhead blocks. Set of 4. 

Front lower suspension arm for XB8 made from super-tough, high-tech composite material. Universal design allows the arm to be used on either left or right sides. 

Molded lightweight front LOWER suspension arm made from specially-formulated graphite composite material.  

MEDIUM-hardness front LOWER suspension arm made from high-tech composite material. The exclusive composite mixture used for suspension arms gives a perfect balance between reliability and performance; the suspension arm is rigid enough for a responsive feel, yet soft enough for extreme durability. 

Front lower suspension arm for C-hub suspension molded from medium hardness composite mixture. 

Front lower suspension arm for C-hub suspension molded from specially-formulated graphite composite material.  

Front lower suspension arm for C-hub suspension molded from a new hard composite mixture.  

Front lower suspension arm for C-hub suspension molded from soft hardness composite mixture, super-tough, high-tech composite material. 

Molded lightweight front UPPER suspension arm made from specially-formulated graphite composite material. 

MEDIUM-hardness front UPPER suspension arm made from high-tech composite material. The exclusive composite mixture used for suspension arms gives a perfect balance between reliability and performance; the suspension arm is rigid enough for a responsive feel, yet soft enough for extreme durability. 

Mounting steel pivot ball 6.8mm dia. Set of 2. 

Eccentric bushing for I.A.C. (Integrated Adjustable Caster). 1 setting (identified by 1 dot) allows for either +1 or -1 caster adjustment depending on the orientation of the bushing. 

Eccentric bushing for I.A.C. (Integrated Adjustable Caster). 2 setting (identified by 2 dots) allows for either +2 or -2 caster adjustment depending on the orientation of the bushing. 

Optional RIGHT steering block with trailing axle makes the car easier to drive with increased forward traction. 

Optional LEFT steering block with trailing axle makes the car easier to drive with increased forward traction.  

Front pivot ball steering block molded from specially formulated composite material. Fits larger outside ball-bearings for increased reliability and life-span. 

Lightweight yet ultra-strong front pivot ball steering block molded from specially formulated graphite composite material. 

Front C-hub steering block molded from specially formulated composite material. Features alu inserts for increased durability. Fits larger outside ball-bearings for increased reliability and life-span. 

Molded composite C-hub for RIGHT steering block. Made from high-tech composite material. Caster pre-set at 16. For use with matching left-side C-hub #352287.  

Molded composite C-hub for LEFT steering block. Made from high-tech composite material. Caster pre-set at 16. For use with matching right-side C-hub #352277. 

Steel bushing for C-hub steering block. Set of 2. 

Alu steering block plate allows for easy Ackermann position adjustment to help fine-tune the car???s handling in all track conditions. Set of L+R. 

Front anti-roll bar for XB8, XT8 & GTX8 cars, 1.6mm thick.  

Front anti-roll bar for XB8, XT8 & GTX8 cars, 1.8mm thick.  

Front anti-roll bar for XB8, XT8 & GTX8 cars, 2.0mm thick.  

Front anti-roll bar for XB8, 2.2mm thick. Laser-engraved for easy identification. 

Front anti-roll bar for XB8, 2.3mm thick. Laser-engraved for easy identification.
 

Front anti-roll bar for XB8, 2.5mm thick. Laser-engraved for easy identification. 

Front anti-roll bar for XB8, 2.6mm thick. Laser-engraved for easy identification. 

Front anti-roll bar for GTX, 2.8mm thick. Laser-engraved for easy identification. 

Premium quality 6.8mm ball stud made from special HUDY Spring Steelâ„¢. Additionally heat treated for maximum strength, reliability, and long life. Set of 4. 

Ball stud 6.8mm with backstop, made from steel.  

Machined alu countersunk shims for use with ball stud. Set of 10. 

Rear lower suspension arm for XB9 made from super-tough high-tech composite material. Smart, universal design allows the same front arm to be used on both left and right sides. 

Molded lightweight composite rear lower suspension arm made from specially-formulated graphite composite material.  

Rear lower suspension arms molded from an extra-hard composite mixture. 

CNC-machined 6.8mm dia mounting pivot ball with shoulder,made from premium lightweight 7075 T6 aluminum. Set of 4. 

CNC-machined 6.8mm dia mounting pivot ball,made from premium lightweight 7075 T6 aluminum. Set of 4. 

Optional carbon rear lower arm plate allows for stiffer the arms and makes the car more stable and easier to drive under high-grip conditions. 

Lightweight composite mud guard for rear suspension arms protects the rear drivetrain in wet & dirty track conditions. Set of L+R. 

Chassis side guard brace CNC-machined from high-grade carbon material.  

Reinforcement insert for rear composite brace, stiffens the composite brace and chassis for high traction tracks.  

With this suspension holder, the roll center is moved by +2mm to allow for super fine roll-center adjustment.  

The rear uprights were redesigned and feature larger outside 8x16x5mm ball-bearings for increased reliability and life-span.  

Lightweight yet ultra-strong rear upright molded from special graphite composite material.  

Rear anti-roll bar for XB8, XT8 & GTX8 cars, 1.8mm thick. 

Rear anti-roll bar for XB8, XT8 & GTX8 cars, 2.0mm thick. 

Rear anti-roll bar 2.2mm thick. 

Rear anti-roll bar 2.4mm thick. 

Rear anti-roll bar for XB8 & XT8, 2.5mm thick. Laser-engraved for easy identification.
 

Rear anti-roll bar 2.8mm thick. 

Rear anti-roll bar 3.0mm thick. 

Rear anti-roll bar 3.2mm thick. 

Aerodynamic rear wing molded from a very flexible composite mixture. All edges in critical areas are reinforced to prevent breakage. 

Aerodynamic rear wing molded from flexible composite material.  

Aerodynamic rear wing molded from flexible composite material.  

XRAY super lighweight 1/8 off-road lexan wing designed for a perfect fit to XB8 and working in conjuction with the XRAY off-road bodies.  

Aerodynamic rear wing (black) molded from a very flexible composite mixture. All edges in critical areas are reinforced to prevent breakage. 

Aerodynamic rear wing (orange) molded from a very flexible composite mixture. All edges in critical areas are reinforced to prevent breakage. 

Aerodynamic rear wing (pink) molded from a very flexible composite mixture. All edges in critical areas are reinforced to prevent breakage. 

Aerodynamic rear wing (yellow) molded from a very flexible composite mixture. All edges in critical areas are reinforced to prevent breakage. 

Alu rear wing shim for XB and XT series buggies and truggies. Provides additional support to prevent wing from pulling off from mounting screws. Set of 2. 

Complete CENTER differential set with larger diff gears for increased traction. Perfect play between gears and larger oil volume prevents the diff from overheating, extending its lifespan.  

Rubber-sealed differential case made from new specially-formulated graphite composite material. Lighter, tougher material with higher temperature and wear resistance, also holds the screws better secured in place. 

Large volume rubber-sealed differential housings made from tough composite give perfect fit and no vibration.  

Large volume rubber-sealed CENTER differential case made from new specially-formulated graphite composite material. Lighter, tougher material with higher temperature and wear resistance, also holds the screws better secured in place. 

44-tooth large external bevel gear manufactured from HUDY Steel for drive ratio adjustment.  

45-tooth large external bevel gear manufactured from HUDY Steel for drive ratio adjustment.  

48-tooth large external spur gear for center differential, precision-machined on a special gear machine. Must be used with Center Diff Shimming Plates (#354032) and Alu. Center Diff Mounting Plate 7075 T6 (3mm) (#354055) because of larger diameter. 

47-tooth large external spur gear for center differential, precision-machined on a special gear machine. Must be used with Center Diff Shimming Plates (#354032) and Alu. Center Diff Mounting Plate 7075 T6 (3mm) (#354055) because of larger diameter. 

45-tooth large external spur gear for center differential. Precision machined on a special gear machine. 

44-tooth large external spur gear for center differential. Precision machined on a special gear machine. 

46-tooth large external spur gear for center differential. 

47-tooth large external spur gear for center differential. 

48-tooth large external spur gear for center differential. 

Precision-ground polished steel pin 3.5 x 33 mm. for internal satellite gears used in large center differential #355013. Set of 2 

Precision-ground polished steel pin 3.5 x 33 mm for internal satellite gears used in large center differential #355013.  

Precision-ground polished alu pin 3.5 x 26.6 mm for internal satellite gears used in large front & rear differentials #355004 and #355005. 

Precision-ground polished alu pin 3.5 x 33 mm for internal satellite gears used in large center differential #355013.  

Sealing gasket for center differential housing. Fits #355013. Set of 4. 

Complete Active Differentialâ„¢ set for XB8.  

The unique XRAY Center Active Differentialâ„¢ is a high-performance, adjustable gear differential that vastly improves the buggy’s speed and handling characteristics. 

12-tooth bevel drive gear for front/rear differential. Precision machined on a special gear machine. 

The 46T diff bevel gear for XRAY Active Diffâ„¢ is machined from special HUDY steel material which has been specially developed for gear-type products, additionally hardened and precision ground to fit the tightest tolerance requirements for perfect fit with the diff outdrives.  

46-tooth large bevel gear for Active Center Differentialâ„¢ is machined from special HUDY steel material which has been specially developed for gear-type products, additionally hardened and precision ground to fit the tightest tolerance requirements for perfect fit with the diff outdrives.  

Lightweight CNC-machined diff outdrive adapters for XB8 Active Diff. 

CNC-machined CVD drive axle made from premium lightweight Swiss 7075 T6 hardcoated aluminum. 

Drive axle for XRAY adjustable drive shafts. Drive shaft length adjustment uses 4 different connecting hole positions at the drive axle end to allow changes to overall driveshaft length.  

All-new front & rear universal drive shafts are used on the XB8 to generate more traction and have less resistance in the front when maximum steering angle is applied.

 

Blackcoated aluminum wheel axle with +1mm offset. Using these wheel axles will increase the overall track width by 2mm, making the car more stable and easier to drive.  

Blackcoated aluminum wheel axles with +2mm offset. Using these wheel axles will increase the overall track width by 4mm, making the car more stable and easier to drive. Set of 2. Wheel axles can be mounted in both front and rear. 

Hardcoated aluminum wheel nut with cover for XB8 wheels. Using these wheel nuts, you will never have problems anymore with dirt getting into the wheel axle assembly! Fits front and rear wheel axles.  

Polished chrome pin with flat spot, 3.0 x 16.8mm. Specially hand-ground for maximum precision. Set of 2. 

Optional front universal central drive shaft, CNC-machined from world-renowned HUDY Spring Steel. Ensures more free movement of the drivetrain and improves traction.

 

Optional rear universal central drive shaft, CNC-machined from world-renowned HUDY Spring Steelâ„¢. Ensures more free movement of the drivetrain and improves traction. 

High-performance 12T pinion gear, manufactured from special steel for toughness and durability. 

High-performance 13 tooth pinion gear, manufactured from special steel for toughness and durability with precise tolerances and assures unparalleled concentricity. Precision-cut teeth with chamfered edges. Run-in for smooth operation. Includes M4x4 set screw. 

High-performance 14 tooth pinion gear, manufactured from special steel for toughness and durability with precise tolerances and assures unparalleled concentricity. Precision-cut teeth with chamfered edges. Run-in for smooth operation. Includes M4x4 set screw. 

High-performance 15 tooth pinion gear, manufactured from special steel for toughness and durability with precise tolerances and assures unparalleled concentricity. Precision-cut teeth with chamfered edges. Run-in for smooth operation. Includes M4x4 set screw. 

High-performance 16 tooth pinion gear, manufactured from special steel for toughness and durability with precise tolerances and assures unparalleled concentricity. Precision-cut teeth with chamfered edges. Run-in for smooth operation. Includes M4x4 set screw. 

High-performance 17 tooth pinion gear, manufactured from special steel for toughness and durability with precise tolerances and assures unparalleled concentricity. Precision-cut teeth with chamfered edges. Run-in for smooth operation. Includes M4x4 set screw. 

Set of two replacement self-adhesive rubbers. These rubber straps are used to prevent the battery from moving. 

Optional brass M15 adjusting nut for capturing pivot balls in front steering blocks. The additional weight nuts are more than 3x heavier than standard alu adjusting nut. Great and handy for weight balance adjustment. Set of 2. Fits XB8.  

Molded composite ball cup for cushioning alu M15 alu adjusting nut against 13.9mm pivot ball. Set of 2. Fits XB8. 

Set of composite molded shims for XB8 shocks. 

Set of composite molded shock pistons for two shock absorbers with five 1.5mm holes & two 1.0mm holes.  

Set of composite molded shock pistons for two shock absorbers with six 1.3mm holes & two 1.1mm holes. 

Set of composite molded shock pistons for two shock absorbers with six 1.4mm holes & two 1.1mm holes. 

Set of composite molded shock pistons for two shock absorbers with eight 1.2mm holes & two 1.2mm holes. 

Set of composite molded shock pistons for two shock absorbers with eight 1.3mm holes & two 1.2mm holes.  

Set of composite molded bushing and shims for XB8, GTX & XT8 cars. 

CNC-machined 1-piece alu shock cap for XB8, made from premium lightweight 7075 T6 aluminum. Features a small vent hole that makes shock assembly very predictable and easy, allowing excess shock oil to easily escape. Machined interior ridges ensure proper placement and sealing of the super-soft silicone membrane.  

CNC-machined 1-piece alu shock cap made from premium lightweight 7075 T6 aluminum.  

CNC-machined 1-piece alu shock cap for XB8 Zero Rebound Shocks, made from premium lightweight 7075 T6 aluminum. 

Shock membrane for shock absorbers, made of soft molded rubber. The new shock membranes are now wider to fit the new big-bore shocks.  

Newly designed improved shock membranes provide more consistent feel during long finals with no sign of fade. Shock membrane for shock absorbers, made of soft molded rubber. The new shock membranes are wider to fit the big-bore shocks. The material has been also improved to guarantee the same damping characteristics from the beginning of the race to the end even after excessive loads. Set of 4. 

Shock membrane for XB8 shocks, made from soft molded rubber. Features internal bottom ribs to maintain shape. The specially-formulated rubber material of the shock membrane ensures equal damping characteristics from the beginning of the race to the end, even after extreme operation. Set of 4. Fits XB8. 

Rubber valve for 2-way flow in shock pistons. Suitable for shocks in XB8, XT8, and GTX. 

Shock membrane for XB8 shocks, made from medium molded rubber. The cell shock membranes have less air gap that helps to generate more grip of the car.  

Shock membrane for XB8 shocks, made from soft molded rubber. The cell shock membranes have less air gap that helps to generate more grip of the car.  

Foam inserts for XRAY shocks, go between shock upper mount and rubber membrane. Prevents membrane collapse. Provides slightly more steering, and more stability when landing from big jumps.  

Complete set of Zero Rebound Front Shock Absorbers for XB8. Zero Rebound Shocks can be set to allow less rebound than standard shock absorbers, decreasing responsiveness and improving bump absorption on bumpy tracks. 

CNC-machined alu front shock body for XB8 Zero Rebound Shocks, made from premium lightweight 7075 T6 aluminum.  

Thick, robust 3.5mm front shock shaft, precisely machined from special high-tensile steel and hand-ground for a super-smooth finish to ensure smooth movement in the shock body.  

Thick, robust 3.5mm front shock shaft, precisely machined from special high-tensile steel and hand-ground for a super-smooth finish to ensure smooth movement in the shock body. 

New progressive springs marked 0.7-0.8 are soft at the beginning of the compression (similar to hardness 0.7) but become harder as the spring is compressed more in the middle, with hardness 0.8 at the end. Pearl-grey color for easy identification. Set of 2. 

New ultimate-match front shock springs (C = 0.65) for front shocks. White color. Set of 2. 

New ultimate-match front shock springs (C = 0.70) for front shocks. Grey color. Set of 2. 

New ultimate-match front shock springs (C = 0.75) for front shocks. Silver color. Set of 2. 

New ultimate-match front shock springs (C = 0.80) for front shocks. Light blue color. Set of 2. 

New ultimate-match front shock springs (C = 0.86) for XRAY front shocks. Blue color. Set of 2. 

New ultimate-match front shock springs (C = 0.92) for XRAY front shocks. Violet color. Set of 2. 

New ultimate-match front shock springs (C = 0.98) for XRAY front shocks. Purple color. Set of 2. 

Complete set of Zero Rebound Rear Shock Absorbers for XB8. 

CNC-machined alu rear shock body for XB8 Zero Rebound Shocks, made from premium lightweight 7075 T6 aluminum.  

Thick, robust 3.5mm rear shock shaft, precisely machined from special high-tensile steel and hand-ground for a super-smooth finish to ensure smooth movement in the shock body.  

Thick, robust 3.5mm rear shock shaft, precisely machined from special high-tensile steel and hand-ground for a super-smooth finish to ensure smooth movement in the shock body.  

New progressive springs marked 0.5-0.6 are soft at the beginning of the compression (hardness 0.5) but become harder as the spring is compressed more in the middle, with hardness 0.6 at the end. Pearl-grey color for easy identification. Set of 2. 

New SOFT progressive springs are soft at the beginning of the compression but become harder as the spring is compressed more in the middle, with highest hardness at the end. Marked with ONE stripe for easy identification. 

New SOFT-MEDIUM progressive springs are soft at the beginning of the compression but become harder as the spring is compressed more in the middle, with highest hardness at the end. Marked with TWO stripes for easy identification. 

New MEDIUM progressive springs are soft at the beginning of the compression but become harder as the spring is compressed more in the middle, with highest hardness at the end. Marked with THREE stripes for easy identification. 

MEDIUM-HARD progressive springs have medium firmness at the beginning of the compression but become firmer as the spring is compressed more in the middle, with hard firmness at the end. 

Long progressive springs are soft at the beginning of the compression but become harder as the spring is compressed more in the middle, with highest hardness at the end.  

Long progressive springs are soft at the beginning of the compression but become harder as the spring is compressed more in the middle, with highest hardness at the end.  

MEDIUM-HARD long progressive springs have medium firmness at the beginning of the compression but become firmer as the spring is compressed more in the middle, with hard firmness at the end.  

New ultimate-match rear shock springs (C = 0.47) for XRAY rear shocks. White color. Set of 2. 

New ultimate-match rear shock springs (C = 0.50) for XRAY rear shocks. Grey color. Set of 2. 

New ultimate-match rear shock springs (C = 0.53) for XRAY rear shocks. Silver color. Set of 2. 

New ultimate-match rear shock springs (C = 0.57) for XRAY rear shocks. Light blue color. Set of 2. 

New ultimate-match rear shock springs (C = 0.61) for XRAY rear shocks. Blue color. Set of 2. 

New ultimate-match rear shock springs (C = 0.65) for XRAY rear shocks. Violet color. Set of 2. 

New ultimate-match rear shock springs (C = 0.70) for XRAY rear shocks. Purple color. Set of 2. 

New FRONT progressive springs are slightly progressive, but under more compression they change characteristics to become more linear.  

FRONT progressive springs. Slightly progressive, but under more compression they change characteristics to become more linear.  

New REAR progressive springs are slightly progressive, but under more compression they change characteristics to become more linear.  

Complete set of 4-shoe clutch system includes flywheel, lightweight medium aluminum clutch shoes, gold (soft) clutch springs, assembly screws, flywheel collar, and flywheel nut. 

13-tooth clutch bell made from HUDY steel, precision-machined on a special gear machine. 

13-tooth clutch bell made from HUDY steel, precision-machined on a special gear machine. 

Alu flywheel for 4-shoe clutch made from Swiss 7075 T6 alu and hardcoated for extra durability. 

CNC-machined flywheel nut for 4-shoe clutch. Made from HUDY Spring Steelâ„¢. 

Aluminum Soft clutch shoes for 4-shoe clutch. Set of 4. 

Aluminum Medium clutch shoes for 4-shoe clutch. Set of 4. 

Aluminum Hard clutch shoes for 4-shoe clutch. Set of 4. 

Graphite clutch shoe made from special graphite mixture material.  

Soft clutch springs for 4-shoe clutch. Softer spring allows for earlier engagement. 

Medium clutch springs for 4-shoe clutch. Medium spring allows for good overall engagement point, though with slightly different characteristics in comparison with the soft springs. 

Hard clutch springs for 4-shoe clutch. Hard spring allows for later engagement point. 

Easy to install assembly screws for 4-shoe clutch system. Set of 4pcs. 

Shim for long-shaft electric motors (those with shafts longer than 18mm measured from the end of the shaft to motor cover) such as Tekin. 

XRAY Premium Silicone Oil 100 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 150 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 200 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 250 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 300 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 400 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 500 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 550 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 600 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 700 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 800 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 900 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 1000 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 2000 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 6000 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 8000 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 10 000 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 15 000 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 20 000 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 30 000 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 40 000 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 50 000 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 60 000 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 80 000 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 100 000 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 150 000 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 200 000 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

XRAY Premium Silicone Oil 300 000 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel. 

All-new redesigned XB8 body has been dramatically improved in all aspects: better aerodynamics, increased downforce & side stability, improved landings, and significantly increased rear downforce make the XB8’16 racing body unbeatable in performance design.  

Lightweight version of XRAY-designed high-speed body for XB8 and XB8E.  

Stylish XRAY Starburst wheels (white) are molded from light but very durable material. Set of 4. 

Stylish XRAY Starburst wheels (orange) are molded from light but very durable material. Set of 4. 

Stylish XRAY Starburst wheels (pink) are molded from light but very durable material. Set of 4. 

Stylish XRAY Starburst wheels (yellow) are molded from light but very durable material. Set of 4. 

Connection cable for plugging receiver battery pack into the receiver. Standard Futaba J connector on receiver end, micro battery connector on the battery end. 

Set of black & white transparent XRAY XB8 body stickers printed on premium quality, self-adhesive material that is very easy to apply. 

M4x7 button-head machine screw, hex drive with hex also in the bottom. This screw can be used as optional downstop screw for XB8 kits.  

M3.0x14 pan-head screw, self-tapping, Phillips drive. Set of 10 pieces. 

New high-speed ball-bearings manufactured specially for XRAY. ID x OD x thickness (mm) = 13x19x4. Set of 2 pieces. 

New high-speed ball-bearings manufactured specially for XRAY XB808. Sealed with rubber seal from one side and with steel seal from other side. ID x OD x thickness (mm) = 13x19x4. Set of 2 pieces. 

Flat washer. ID x OD x thickness = 6mm x 18mm x 0.3mm. Set of 10. 

Flat washer. ID x OD x thickness = 6mm x 18mm x 0.5mm. Set of 10. 

Flat washer. ID x OD x thickness = 6mm x 10mm x 0.2mm. Set of 10. 

Flat washer. ID x OD x thickness = 6mm x 10mm x 0.3mm. Set of 10.