xrayxrayHome XRAY homeXRAY X-shopXRAY X-forumRCAmerica
supportsearchcontactguestbooksite map
newsproductsaboutusworldwide headlines
click to enable quick search
 
Alu Countersunk Shim (4)
#301159

Machined alu countersunk shims for use on XRAY Quick Saver™. Set of 4. 



Alu Countersunk Shim - Orange (4)
#301159-O

Machined alu countersunk shims for use on XRAY Quick Saver™. Orange colour. Set of 4. 



Front Body Mount Set +1mm Height
#301323

XRAY presents +1mm height-adjustable body posts for the T2 and NT1. For serious racers who focus on the small details, body height plays a very important role in the performance of the car and as such, ultra-fine body height tuning was developed by XRAY R&D engineers to address this increasingly important tuning set-up feature. 



Front Body Mount Set +2mm Height
#301324

XRAY presents +2mm height-adjustable body posts for the T2 and NT1. For serious racers who focus on the small details, body height plays a very important role in the performance of the car and as such, ultra-fine body height tuning was developed by XRAY R&D engineers to address this increasingly important tuning set-up feature. 



Rear Body Mount Set +1mm Height
#301333

XRAY presents +1mm height-adjustable body posts for the T2 and NT1. For serious racers who focus on the small details, body height plays a very important role in the performance of the car and as such, ultra-fine body height tuning was developed by XRAY R&D engineers to address this increasingly important tuning set-up feature. 



Rear Body Mount Set +2mm Height
#301334

XRAY presents +2mm height-adjustable body posts for the T2 and NT1. For serious racers who focus on the small details, body height plays a very important role in the performance of the car and as such, ultra-fine body height tuning was developed by XRAY R&D engineers to address this increasingly important tuning set-up feature. 



Composite Rear 6mm Adjustable Body Mount Set +1mm Height
#301337

Rear body mount set with 6mm-thick +1mm height-adjustable body posts.  



Composite Rear 6mm Adjustable Body Mount Set +2mm Height
#301338

Rear body mount set with 6mm-thick +1mm height-adjustable body posts. 



Alu Adjustable Body Post Stop (2)
#301351-O

Very handy, easily externally adjustable body posts from Swiss 7075 T6 aluminum. Allows for adjustment of body height by 3mm without needing to change the position on the body post. 



Alu Adjustable Body Post Stop Nut (2)
#301352-O

Alu body post stop nut for #301351-O made from Swiss 7075 T6 aluminum. Spare part for #301351-O Alu Adjustable Body Post Stop (2). 



Graphite Shim for Rear Body Post Adjustment 3.0mm (4)
#301390

CNC-machined shims made from 3.0mm thick premium-grade graphite material allow the rear body posts to be positioned in three different positions. Part of the BPA system – Body Position Adjustment. 



T4 Alu Adjustment Ball-Bearing Hub (2)
#302063

These beautiful 7075 T6 aluminum adjustable ball-bearing hubs are direct replacement of the standard composite ones included in the kit.  



Alu Front & Rear Suspension Arms 1-Hole - Swiss 7075 T6
#302101

The aluminum suspension arms are a direct replacement for the standard composite graphite arm.  



Front Suspension Arm - Hard
#302161

Hard molded composite front lower suspension arm. Recommended for use in standard conditions or with rubber tires. Marked with “H” for easy identification. May be used on either left or right side. 



Front Suspension Arm - Extra-Hard
#302162

Extra-hard molded composite front lower suspension arm. Recommended for use in high-grip conditions or with foam tires. Marked with “XH” for easy identification. May be used on either left or right side. 



Front Susp. Arm - Hard - 1-Hole
#302163

Molded composite front lower suspension. Standard hard-composite mixture arms (labeled “H”). The specially-formulated composite material allows for a very light yet very durable suspension arm that can withstand the rigors of high-performance racing with rubber tires. Can be also used for foam tires. Fits XRAY T2, T3 cars. 



Front Susp. Arm - Extra-Hard - 1-Hole
#302164

Molded composite front lower suspension. Extra-hard composite mixture arms (labeled “XH”) for high-traction foam-tire racing. The specially-formulated composite material allows for a very light yet very durable suspension arm that can withstand the rigors of high-performance racing with foam tires. Can be also used for rubber tires. Fits XRAY T2, T3 cars. 

Product was discontinued! 



Composite Front Susp. Arm 2-Hole - Hard
#302165

Molded composite front lower suspension arms with 2-holes for optional setting. Inner position is used for increased steering, outer position is used for more stable handling. Standard hard-composite mixture arms (labeled “H”) for rubber-tire racing. Can be also used for foam tires. Fits XRAY T3. 



Composite Front Susp. Arm 2-Hole - X-Hard
#302166

Molded composite front lower suspension arms with 2-holes for optional setting. Inner position is used for increased steering, outer position is used for more stable handling. Extra-hard composite mixture arms (labeled “XH”) for high-traction foam-tire racing. Can be also used for rubber tires. Fits XRAY T3. 



Comp. Front Susp. Arm 1-Hole - Graphite
#302167

Molded lightweight composite front lower suspension arm. The specially-formulated graphite composite material allows for a very light suspension arm that can withstand the rigors of high-performance racing. 

Product was discontinued! 



Composite Front Susp. Arm 1-Hole - Graphite
#302169

Molded lightweight composite front lower suspension arm, 2mm wider to better fit new suspension mounts. Fits T4’14.
 



Alu Front Suspension Arm 1-Hole - Swiss 7075 T6
#302170

The aluminum suspension arm is a direct replacement for the standard composite graphite arm.  



Graphite Front Lower Arm Plate 1.6mm (L+R)
#302190

Optional graphite front lower arm plate easily changes the hardness of the whole front suspension.  



Composite Steering Block - Medium - V2
#302252

Molded composite steering block of “medium” hardness (M) for rubber-tire racing. The steering block features two Ackermann positions, and uses small but robust 5x10 ball-bearings to minimize unsprung weight. Can be also used for foam tires. Fits XRAY T2, T3 cars. 



Composite Steering Block - Graphite
#302254

Molded steering block made from specially-formulated graphite composite material is a perfect balance between reliability and performance.  



Alu Steering Block
#302256

Alu Steering Block for XRAY T2 is CNC-machined from premium lightweight T6 aluminum, polished for luxuriuous and stylish appearance. Ultra-strong construction provides very long life and durability in even the most extreme racing conditions.  



Ball-Bearing Composite Bushing (4)
#302295

Molded composite bushings for installing ball-bearings in alu steering blocks (302256) and alu rear uprights (303358 and 303359). Set of 4. 



Composite C-Hub Bushing (2+2)
#302296

Composite bushings for T2, T3 alu C-hubs. 



Alu C-Hub Block - Caster 0° - Orange
#302334

CNC-machined highest-quality duraluminum C-hub for XRAY T4. Caster pre-set at 0 degrees. Engraved with "0" for easy identification. Fits left or right sides. Includes two nylon bushings. 



Alu C-Hub Front Block Right - Caster 2° - Orange
#302335

CNC-machined high-quality Swiss 7075 T6 RIGHT C-hub. Caster pre-set at 2°, engraved with "2" for easy identification. Orange color. 



Alu C-Hub Front Block Left - Caster 2° - Orange
#302336

CNC-machined high-quality Swiss 7075 T6 LEFT C-hub. Caster pre-set at 2°, engraved with "2" for easy identification. Orange color. 



Alu C-Hub Front Block Right - Caster 4° - Orange
#302337

CNC-machined highest-quality duaraluminum C-hub for right steering block of T2, T3. Caster pre-set at 4°. Engraved with "R4" to easy identification. Includes two nylon bushings. Use with left-side alu 4° C-hub #302338.  



Alu C-Hub Front Block Left - Caster 4° - Orange
#302338

CNC-machined highest-quality duaraluminum C-hub for left steering block of T2, T3. Caster pre-set at 4°. Engraved with "L4" to easy identification. Includes two nylon bushings. Use with right-side alu 4° C-hub #302337.  



Alu C-Hub Front Block Right - Caster 6° - Orange
#302339

CNC-machined highest-quality duaraluminum C-hub for right steering block of T2, T3. Caster pre-set at 6°. Engraved with "R6" to easy identification. Includes two nylon bushings. Use with left-side alu 6° C-hub #302340.  



Alu C-Hub Front Block Left - Caster 6° - Orange
#302340

CNC-machined highest-quality duaraluminum C-hub for left steering block of T2, T3. Caster pre-set at 6°. Engraved with "L6" to easy identification. Includes two nylon bushings. Use with right-side alu 6° C-hub #302339.  



Composite C-Hub Front Block, Right - 2° Deg.
#302343

Molded C-hub for right steering block of T2, T3. Caster pre-set at 2°. Engraved with "R2" to easy identification. Use with left-side composite 2° C-hub #302344.  



Composite C-Hub Front Block, Left - 2° Deg.
#302344

Molded C-hub for left steering block of T2, T3. Caster pre-set at 2°. Engraved with "L2" to easy identification. Use with right-side composite 2° C-hub #302343.  



Composite C-Hub Front Block, Right - 4° Deg.
#302345

Molded composite C-hub for front right steering block on XRAY T2, T3. Caster pre-set at 4° for neutral handling. Engraved with "4R" for easy identification. Use with left-side composite 4° C-hub #302346. 



Composite C-Hub Front Block, Left - 4° Deg.
#302346

Molded composite C-hub for front left steering block on XRAY T2, T3. Caster pre-set at 4° for neutral handling. Engraved with "4L" for easy identification. Use with left-side composite 4° C-hub #302345. 



Composite C-Hub Front Block, Right - 6° Deg.
#302347

Molded C-hub for right steering block of T2, T3. Caster pre-set at 6°. Engraved with "R6" to easy identification. Use with left-side composite 6° C-hub #302348.  



Composite C-Hub Front Block, Left - 6° Deg.
#302348

Molded C-hub for left steering block of T2, T3. Caster pre-set at 6°. Engraved with "L6" to easy identification. Use with right-side composite 6° C-hub #302347.  



Composite C-Hub Right - 0° Deg. - Medium
#302359

Molded composite C-hub for right steering block. The inside hole was enlarged to allow to use new extra stong ECS driveshafts.  



Composite C-Hub Left - 0° Deg. - Medium
#302360

Molded composite C-hub for left steering block. The inside hole was enlarged to allow to use new extra stong ECS driveshafts.  



Composite C-Hub Right - 2° Deg. - Medium (ECS)
#302361

Molded composite C-hub for right steering block of T2, T3. Caster pre-set at 2°. Medium rigidity for rubber-tire racing. Use with matching left-side C-hub #302362. Can be also used for foam tires. 



Composite C-Hub Left - 2° Deg. - Medium (ECS)
#302362

Molded composite C-hub for left steering block of T2, T3. Caster pre-set at 2°. Medium rigidity for rubber-tire racing. Use with matching right-side C-hub #302361. Can be also used for foam tires. 



Composite C-Hub Right - 6° Deg. - Medium (ECS)
#302365

Molded composite C-hub for right steering block of T2, T3. Caster pre-set at 6°. Medium rigidity for rubber-tire racing. Use with matching left-side C-hub #302366. Can be also used for foam tires. 



Composite C-Hub Left - 6° Deg. - Medium (ECS)
#302366

Molded composite C-hub for left steering block of T2, T3. Caster pre-set at 6°. Medium rigidity for rubber-tire racing. Use with matching right-side C-hub #302365. Can be also used for foam tires. 



Composite C-Hub Right - 2° Deg. - Hard (ECS)
#302371

Molded composite C-hub for right steering block of T2, T3. Caster pre-set at 2°. Hard rigidity for foam-tire racing. Use with matching left-side C-hub #302372. Can be also used for rubber tires. 



Composite C-Hub Left - 2° Deg. - Hard (ECS)
#302372

Molded composite C-hub for left steering block of T2, T3. Caster pre-set at 2°. Hard rigidity for foam-tire racing. Use with matching right-side C-hub #302371. Can be also used for rubber tires. 



Composite C-Hub Right - 4° Deg. - Hard (ECS)
#302373

Molded composite C-hub for right steering block of T2, T3. Caster pre-set at 4°. Hard rigidity for foam-tire racing. Use with matching left-side C-hub #302374. Can be also used for rubber tires. 



Composite C-Hub Left - 4° Deg. - Hard (ECS)
#302374

Molded composite C-hub for left steering block of T2, T3. Caster pre-set at 4°. Hard rigidity for foam-tire racing. Use with matching right-side C-hub #302373. Can be also used for rubber tires. 



Composite C-Hub Right - 6° Deg. - Hard
#302375

Molded composite C-hub for right steering block of T2, T3. Caster pre-set at 6°. Hard rigidity for foam-tire racing. Use with matching left-side C-hub #302376. Can be also used for rubber tires. 



Composite C-Hub Left - 6° Deg. - Hard
#302376

Molded composite C-hub for left steering block of T2, T3. Caster pre-set at 6°. Hard rigidity for foam-tire racing. Use with matching right-side C-hub #302375. Can be also used for rubber tires. 



Composite C-Hub Right - 0° Deg. - Graphite (ECS)
#302379

Molded composite C-hub for right steering block. The inside hole was enlarged to allow to use new extra stong ECS driveshafts. 



Composite C-Hub Left - 0° Deg. - Graphite (ECS)
#302380

Molded composite C-hub for left steering block. The inside hole was enlarged to allow to use new extra stong ECS driveshafts.  



Composite C-Hub Right - 4° Deg. - Graphite (ECS)
#302383

Molded composite C-hub for right steering block. The inside hole was enlarged to allow to use new extra stong ECS driveshafts. 



Composite C-Hub Left - 4° Deg. - Graphite (ECS)
#302384

Molded composite C-hub for left steering block. The inside hole was enlarged to allow to use new extra stong ECS driveshafts.  



T4F Anti-Roll Bar Front 1.4mm
#302464

Front anti-roll bar for T4F, 1.4mm thick.  



Alu Dual Servo Saver Arm + Ball-Bearings (2)
#302525

Set of 2 left & right (identical) alu arms for dual servo saver.  



Alu Steering Post for Floating Servo Saver (2)
#302536

CNC-machined alu steering post for floating servo saver. The floating steering system is disconnected from the chassis and works fully independently without affecting flex.  



Alu Shim for Radial Play Adjust. of Steering Arm -Orange (2)
#302544-O

Alu bushing for steering arm eliminates excessive play between the bearings in the steering arm.  



Graphite Steering Plate Set
#302570

Smart chassis flex adjustment via graphite steering plate which can be mounted with an additional aluminum stand.  



Adj. Steering Rod L/R 40mm - Hudy Spring Steel™ (2)
#302610

Set of two adjustable steering rod turnbuckles, manufactured from world-renowned top-secret "Hudy Spring Steel". 



Alu Adjustable Turnbuckle 39mm M3 L/R - Orange (2)
#302612-O

For serious racers who are conscious of weight savings, XRAY offers adjustable left & right M3 steering turnbuckles manufactured from strong, lightweight 7075 T6 aluminum. Lighter by 50%. Precision threading for fine toe adjustment. Length of 39mm. Orange color. Set of 2. 



Composite Ball Joint 4.9mm - Closed with Hole (4)
#302665

Molded composite steering ball-joint for T2 family of cars and T3. Fits 5mm pivot ball or ball stud. Set of 4.  



Brass Front Lower 1-Piece Suspension Holder - Front - FF
#302711

Authentic XRAY brass front lower suspension holder for the FRONT of the front bulkhead. Adds additional weight to the car to attain the minimum weight limit, and replaces other chassis-mounted weights which negatively influence chassis flex.  



Alu Front Lower 1-Piece Suspension Holder - Front - FF - Low
#302712-O

Authentic XRAY alu front lower suspension holders for the front bulkhead on the T4’18. 



Brass Front Lower 1-Piece Suspension Holder - Rear - FR
#302721

Authentic XRAY brass front lower suspension holder for the REAR of the front bulkhead. Adds additional weight to the car to attain the minimum weight limit, and replaces other chassis-mounted weights which negatively influence chassis flex. 



Alu Front Lower 1-Piece Suspension Holder - Rear - FF - Low
#302722-O

Authentic XRAY alu rear lower suspension holders for the front bulkhead on the T4’18.  



Set of Alu Shim (0.5mm, 1.5mm, 2.5mm)
#303120

Ultimate assortment of set-up shims. You can use the shims for easy and accurate adjustment of:
• front and rear roll center
• front bump steer
• front and rear toe-in
• wheelbase  



Set of Alu Shim (1.0mm, 2.0mm, 3.0mm)
#303121

Ultimate assortment of set-up shims. You can use the shims for easy and accurate adjustment of:
• front and rear roll center
• front bump steer
• front and rear toe-in
• wheelbase  



Alu Shim 3x6x0.5mm - Black (10)
#303121-K

Alu shims 3x6mm size, 0.5mm thick. Black color. Set of 10. 



Alu Shim 3x6x0.5mm - Orange (10)
#303121-O

Alu shims 3x6mm size, 0.5mm thick. Orange color. Set of 10. 



T2 Alu Shim 3x6x1.0mm (10)
#303122

Alu shims 3x6mm size, 1mm thick. Silver color, set of 10. 



T2 Alu Shim 3x6x1.0mm - Orange (10)
#303122-O

Alu shims 3x6mm size, 1mm thick. Orange color, set of 10. 



T2 Alu Shim 3x6x2.0mm (10)
#303123

Alu shims 3x6mm size, 2mm thick. Silver color, set of 10. 



T2 Alu Shim 3x6x2.0mm - Orange (10)
#303123-O

Alu shims 3x6mm size, 2mm thick. Orange color, set of 10. 



Alu Shim 3x6x3.0mm (10)
#303125

Alu shims 3x6mm size, 3mm thick. Set of 10. 



Alu Shim 3x6x3.0mm - Black (10)
#303125-K

Alu shims 3x6mm size, 3mm thick. Black color. Set of 10. 



Alu Shim 3x6x3.0mm - Orange (10)
#303125-O

Alu shims 3x6mm size, 3mm thick. Orange color. Set of 10. 



Alu Shim 3x6x5.0mm - Black (10)
#303126-K

Alu shims 3x6mm size, 5mm thick. Black color, set of 10. 



Alu Shim 3x6x6.0mm - Black (10)
#303128-K

Alu shims 3x6mm size, 6mm thick. Black color, set of 10. 



Rear Suspension Arm - Hard
#303161

Hard molded composite rear lower suspension arm. Recommended for use in standard conditions or with rubber tires. Marked with “H” for easy identification. May be used on either left or right side. 



Rear Suspension Arm - Extra-Hard
#303162

Extra-hard molded composite rear lower suspension arm. Recommended for use in high-grip conditions or with foam tires. Marked with “XH” for easy identification. May be used on either left or right side. 



Composite Rear Susp. Arm 1-Hole - Hard - V2
#303163

Molded composite rear lower suspension arm of standard hard-composite mixture (labeled “H”) for rubber-tire racing. The specially-formulated composite material allows for a very light yet very durable suspension arm that can withstand the rigors of high-performance racing with rubber tires. Can be also used for foam tires. Fits XRAY T2, T3 cars. 



Composite Rear Susp. Arm 1-Hole - Extra-Hard - V2
#303164

Molded composite rear lower suspension arm of extra-hard composite mixture (labeled “XH”) for foam-tire racing. The specially-formulated composite material allows for a very light yet very durable suspension arm that can withstand the rigors of high-performance racing with foam tires. Can be also used for rubber tires. Fits XRAY T2, T3 cars. 



Composite Rear Susp. Arm 2-Hole - Hard
#303165

Molded composite rear lower suspension arms with 2-holes for optional setting. Inner position is used for increased steering, outer position is used for more stable handling. Standard hard-composite mixture arms (labeled “H”) for rubber-tire racing. The specially-formulated composite material allows for a very light yet very durable suspension arm that can withstand the rigors of high-performance racing with rubber tires. Can be also used for foam tires. Fits XRAY T2, T3 cars. 



Composite Rear Susp. Arm 2-Hole - X-Hard
#303166

Molded composite rear lower suspension arms with 2-holes for optional setting. Inner position is used for increased steering, outer position is used for more stable handling. Extra-hard composite mixture arms (labeled “XH”) for foam-tire racing. The specially-formulated composite material allows for a very light yet very durable suspension arm that can withstand the rigors of high-performance racing with foam tires. Can be also used for rubber tires. Fits XRAY T2, T3 cars. 



Comp. Rear Susp. Arm 1-Hole - Graphite
#303167

Molded lightweight composite rear lower suspension arm. The specially-formulated graphite composite material allows for a very light yet suspension arm that can withstand the rigors of high-performance racing. 



Composite Rear Susp. Arm 1-Hole - Graphite
#303169

Molded lightweight composite rear lower suspension arm. Fits T4’14.
 



Alu Rear Suspension Arm 1-Hole - Swiss 7075 T6
#303172

The aluminum suspension arm is a direct replacement for the standard composite graphite arm.  



Graphite Rear Lower Arm Plate 1.6mm (L+R)
#303190

Optional graphite rear lower arm plate easily changes the hardness of the whole rear suspension. 



Rear Turnbuckle L/R 25mm - Spring Steel (2)
#303210

Set of two adjustable turnbuckle for adjusting camber of rear uprights, manufactured from world-renowned top-secret "Hudy Spring Steel". 



Alu Adjustable Turnbuckle 26mm M3 L/R - Orange (2)
#303212-O

For serious racers who are conscious of weight savings, XRAY offers adjustable left & right M3 steering turnbuckles manufactured from strong, lightweight 7075 T6 aluminum. Lighter by 50%. Precision threading for fine toe adjustment. Length of 26mm. Orange color. Set of 2. 



Composite Upright 1° Outboard Toe-In - Right - Medium
#303351

Molded-composite right rear upright features built-in 1° of outboard toe-in to improve the rotation of the car in corners and prevent suspension geometry changes in serious crashes. Medium rigidity (labeled “M”) specially optimized for rubber-tire racing. Use with matching left-side rear upright 303361. Can be also used for foam tires. 



Composite Upright 0° Outboard Toe-In - Medium
#303352

Molded-composite rear upright features built-in 0° of outboard toe to improve traction and prevent suspension geometry changes in serious crashes. Medium rigidity (labeled “M”) specially optimized for rubber-tire racing. Use on both left and right sides of the car. Can be also used for foam tires. 



Composite Upright 1° Outboard Toe-In - Right - Hard
#303353

Molded-composite right rear upright features built-in 1° of outboard toe-in to improve the rotation of the car in corners and prevent suspension geometry changes in serious crashes. Hard rigidity (labeled “H”) specially optimized for foam-tire racing. Use with matching left-side rear upright 303363. Can be also used for rubber tires. 



Alu Upright Rear 1° Outboard Toe-In (L+R)
#303358

CNC-machined rear upright made from premium lightweight T6 aluminum. Ultra-strong rear upright provides very long life and durability in even the most extreme racing conditions, features an integrated 1° outboard toe-in. Use of outboard toe-in will increase the corner speed. Complete set of left and right blocks.  



Alu Upright Rear 2° Outboard Toe-In (L+R)
#303359

CNC-machined rear upright made from premium lightweight T6 aluminum. Ultra-strong rear upright provides very long life and durability in even the most extreme racing conditions, features an integrated 2° outboard toe-in. Use of outboard toe-in will increase the corner speed. Complete set of left and right blocks.  

Product was discontinued! 



Composite Upright 0° Outboard Toe-In - Graphite
#303360

Molded rear upright made from specially-formulated graphite composite material features built-in 0° outboard toe to improve traction and prevent suspension geometry changes in serious crashes. 



Composite Upright 1° Outboard Toe-In - Left - Medium
#303361

Molded-composite left rear upright features built-in 1° of outboard toe-in to improve the rotation of the car in corners and prevent suspension geometry changes in serious crashes. Medium rigidity (labeled “M”) specially optimized for rubber-tire racing. Use with matching right-side rear upright 303351. Can be also used for foam tires. 



Composite Upright 0° Outboard Toe - Medium - 1-Hole
#303362

Molded-composite rear upright features built-in 0° of outboard toe to improve traction and prevent suspension geometry changes in serious crashes. This 1-hole upright may be used on high-traction tracks or tracks with long sweepers, since the position of the center hole will allow faster driving through those corners because of better cornering speed.  



Composite Upright 1° Outboard Toe-In - Left - Hard
#303363

Molded-composite left rear upright features built-in 1° of outboard toe-in to improve the rotation of the car in corners and prevent suspension geometry changes in serious crashes. Hard rigidity (labeled “H”) specially optimized for foam-tire racing. Use with matching right-side rear upright 303353. Can be also used for rubber tires. 



Composite Upright 0° Outboard Toe - Hard - 1-Hole
#303364

Molded-composite rear upright features built-in 0° of outboard toe to improve traction and prevent suspension geometry changes in serious crashes. This 1-hole upright may be used on high-traction tracks or tracks with long sweepers, since the position of the center hole will allow faster driving through those corners because of better cornering speed. 



Brass Lower 2-Piece Suspension Holder for ARS - Right
#303714

Brass lower RIGHT suspension holder suitable for standard rear suspension, also suitable for ARS with extra roll center positions. Adds additional weight to the car to attain the minimum weight limit, and replaces other chassis-mounted weights which negatively influence chassis flex. 



Brass Lower 2-Piece Suspension Holder for ARS - Left
#303715

Brass lower LEFT suspension holder suitable for standard rear suspension, also suitable for ARS with extra roll center positions. Adds additional weight to the car to attain the minimum weight limit, and replaces other chassis-mounted weights which negatively influence chassis flex. 



Alu Lower 2-Piece Suspension Holder for ARS - Right - Low
#303716-O

Alu lower RIGHT suspension holder CNC-machined from premium Swiss 7075 T6 aluminum. Suitable for standard rear suspension, also suitable for ARS with extra roll center positions.  



Alu Lower 2-Piece Suspension Holder for ARS - Left - Low
#303717-O

Alu lower LEFT suspension holder CNC-machined from premium Swiss 7075 T6 aluminum. Suitable for standard rear suspension, also suitable for ARS with extra roll center positions.  



Alu Lower 2-Piece Suspension 0.25 Eccentric Holder Stand
#303718-O

Authentic XRAY alu rear lower suspension holder for the REAR of the front bulkhead, with 0.25° eccentric suspension mount holes.  



Brass Rear Lower 1-Piece Suspension Holder - Rear - RR
#303721

Authentic XRAY brass rear lower suspension holder for the REAR of the rear bulkhead. Adds additional weight to the car to attain the minimum weight limit, and replaces other chassis-mounted weights which negatively influence chassis flex. 



Alu Rear Lower 1-Piece Suspension Holder - Rear - RR - Low
#303722-O

Authentic XRAY alu rear lower suspension holder for the REAR of the rear bulkhead of T4.  



Anti-Roll Bar Rear for Ball-Bearings 1.1mm
#303801

Rear anti-roll bar redesigned to work with new bulkheads and ball-bearing roll bar mounting system.  



Anti-Roll Bar Rear for Ball-Bearings 1.2mm
#303802

Rear anti-roll bar redesigned to work with new bulkheads and ball-bearing roll bar mounting system.  



Anti-Roll Bar Rear for Ball-Bearings 1.4mm
#303804

Rear anti-roll bar redesigned to work with new bulkheads and ball-bearing roll bar mounting system.  



Anti-Roll Bar Rear for Ball-Bearings 1.5mm
#303805

Rear anti-roll bar redesigned to work with new bulkheads and ball-bearing roll bar mounting system.  



Anti-Roll Bar Rear for Ball-Bearings 1.6mm
#303806

Rear anti-roll bar redesigned to work with new bulkheads and ball-bearing roll bar mounting system.  



Graphite Gear Differential Bevel & Satelitte Gears (2+4)
#304931

Gear differential precision internal gears made from new graphite composite mixture.  

Replaced by Graphite Gear Diff Bevel & Satelitte Gears (2+4) - Lower 



Graphite Gear Diff Bevel & Satelitte Gears (2+4) - Lower
#304932

Gear differential internal gears precision made from new graphite composite mixture. Includes 2 bevel gears + 4 satellite gears.  



Gear Differential Outdrive Adapter - HUDY Spring Steel™ (2)
#304971

CNC-machined diff outdrive adaptor made from tough HUDY Spring Steel™. Shafts are precision ground and polished for smooth operation. 



ECS (ES) Drive Shaft 50mm for 2mm Pin - HUDY Spring Steel™
#305223

50mm extra-strong ECS drive shaft for 2mm pin made from world-renowned HUDY Spring Steel™.  



ECS (ES) Drive Shaft 52mm for 2mm Pin - HUDY Spring Steel™
#305224

Extra-strong ECS drive shaft for 2mm pin made from world-renowned HUDY Spring Steel™.  



ECS Drive Shaft 50mm for 2mm Pin - HUDY Spring Steel™
#305226

CNC-machined 50mm ECS drive shaft made from world-renowned HUDY Spring Steel™.  

Product was discontinued! 



ECS Drive Shaft 52mm - HUDY Spring Steel™
#305227

CNC-machined 52mm ECS drive shaft made from world-renowned top-secret HUDY Spring Steel™. This race-quality drive shaft is a spare part for #305327 Equalized Corner Speed (ECS) Drive Shaft 52mm - Hudy Spring Steel™ (1), exclusively manufactured by HUDY. 

Product was discontinued! 



ECS Drive Shaft 52mm for 2mm Pin - HUDY Spring Steel™
#305228

CNC-machined 52mm ECS drive shaft made from world-renowned HUDY Spring Steel™.  

Product was discontinued! 



Drive Shaft Coupling for Set Screw – Hudy Spring Steel™
#305231

Hudy Spring Steel™ drive shaft coupling for Set Screw for increased reliability, works in front and rear CVD drive shafts of XRAY T2, T3. Specially hand-ground for maximum precision.  



Composite Drive Shaft Replacement Cap 3.5mm - Orange - Strong (4)
#305242

Low-friction 3.5mm drive pin clips for protecting and cushioning drive shaft pin in diff outdrives.  



ECS Drive Shaft Case - Hudy Spring Steel™
#305250

ECS Drive Shaft Case made from HUDY Spring Steel™. Fits #305325 and #305327 ECS drive shafts. 



ECS Drive Shaft Coupling - Hudy Spring Steel™
#305251

Drive shaft coupling for ECS drive shafts of XRAY T2, made from top-secret, world-renowned HUDY Spring Steel™. Specially hand-ground for maximum precision.  



ECS Drive Shaft Case for 2mm Pin - HUDY Spring Steel™
#305252

ECS Drive Shaft Case made from HUDY Spring Steel™ fits #305330 and #305331 ECS drive shafts.  



ECS Drive Shaft Coupling for 2mm Pin - HUDY Spring Steel™
#305253

Drive shaft coupling for ECS drive shafts. Made from world-renowned HUDY Spring Steel™.  



Drive Shaft 52mm - Hudy Spring Steel™
#305324

CNC-machined 52mm CVD drive shaft made from world-renowned top-secret HUDY Spring Steel™. This race-quality drive shaft is the smallest in the world, exclusively manufactured by HUDY. Drive shaft diff end has been strategically lightened to reduce rotating mass without compromising strength.  



Equalized Corner Speed (ECS) Drive Shaft 50mm - Hudy Spring Steel™ (1)
#305325

XRAY proudly presents the new ECS drive shaft 50mm, designed with high-level racing in mind. The ECS drive shafts were developed to decrease front wheel vibration when racing with a solid front axle, thus providing a much smoother and quieter ride and increasing steering. 

Replaced by ECS Drive Shaft 50mm with 2mm Pins - HUDY Spring Steel™ - Set 



Alu Drive Shaft Swiss 7075 T6 - Hard Coated - 52mm
#305326

Super-lightweight 52mm alu drive shaft CNC-machined from premium Swiss 7075 T6 and hardcoated for extra durability and stylish looks. New design is up to 40% lighter than steel drive shaft. 



Equalized Corner Speed (ECS) Drive Shaft 52mm - Hudy Spring Steel™ (1)
#305327

XRAY proudly presents the new ECS drive shaft 52mm, designed with high-level racing in mind. The ECS drive shafts were developed to decrease front wheel vibration when racing with a solid front axle, thus providing a much smoother and quieter ride and increasing steering. 

Replaced by ECS Drive Shaft 52mm with 2mm Pins - HUDY Spring Steel™ - Set 



Alu Drive Shaft Swiss 7075 T6 - Hard Coated - 50mm
#305328

Super-lightweight 50mm alu drive shaft CNC-machined from premium Swiss 7075 T6 and hardcoated for extra durability and stylish looks. New design is up to 40% lighter than steel drive shaft. 



ECS Drive Shaft 52mm with 2mm Pins - HUDY Spring Steel™ - Set
#305330

52mm ECS drive shaft with new thicker and more reliable 2mm pins. 

Replaced by ECS ES (Extra Strong) Drive Shaft 52mm - HUDY Spring Steel™ 



ECS Drive Shaft 50mm with 2mm Pins - HUDY Spring Steel™ - Set
#305331

50mm ECS drive shaft with new thicker and more reliable 2mm pins.  

Replaced by ECS ES (Extra Strong) Drive Shaft 50mm - HUDY Spring Steel™ 



ECS ES (Extra Strong) Drive Shaft 52mm - HUDY Spring Steel™
#305332

New extra-strong ECS drive shafts. 52mm ECS set with new reinforced drive shaft, drive shaft case, and drive axle.  



ECS ES (Extra Strong) Drive Shaft 50mm - HUDY Spring Steel™
#305333

New extra-strong ECS drive shafts. 52mm ECS set with new reinforced drive shaft, drive shaft case, and drive axle. 



Alu Wheel Hub (2)
#305350

CNC-machined clamping-style alu wheel hubs for XRAY T2, T3. Set of two. 

Replaced by Alu Wheel Hub - Black (2) 



Alu Wheel Hub - Offset -0.75mm (2)
#305351

CNC-machined clamping-style alu wheel hub for T2, T3 features -0.75mm offset to give more narrow track-width. Set of 2. 



Alu Wheel Hub - Offset +0.75mm (2)
#305352

CNC-machined clamping-style alu wheel hub for T2, T3 features 0.75mm offset to give wider track-width. Black color. Set of 2. 



Alu Wheel Hub - Offset +1.5mm (2)
#305353

CNC-machined clamping-style alu wheel hub for T2, T3 features 1.5mm offset to give wider track-width. Set of 2 includes clamping screws. 



Alu Wheel Shim Offset 0.75mm (2)
#305380

Alu wheel shim with 0.75mm offset. Set of 2. Fits T2, T3. 



ECS Drive Shaft Pin 1.5 x 8.5 - V3 (2)
#305390

Polished chrome pin for ECS drive shaft, 1.5 x 8.5mm. Specially hand-ground for maximum precision. To help prevent of loosening of the setscrew from the ECS shaft, XRAY recommends using these new pins with flat spots. The flat spots allow the setscrew to better settle into the coupling. Set of 2. 



ECS Drive Shaft Pin 1.5 x 9 (2)
#305391

Polished chrome pin for ECS drive shaft, 1.5 x 9mm. Specially hand-ground for maximum precision. To help prevent of loosening of the setscrew from the ECS shaft, XRAY recommends using these new pins with flat spots. The flat spots allow the setscrew to better settle into the coupling. Set of 2. 



Drive Shaft Pin 2x10 with Flat Spot (2)
#305392

Polished chrome pin for CVD drive shaft, 2 x 10mm. Specially hand-ground for maximum precision. 



ECS Drive Shaft Pin 2x8.5 with Flat Spot (2)
#305393

Polished chrome pin for ECS drive shaft, 2.0 x 8.5mm.  



Composite Offset Spur Gear 72T / 48
#305772

XRAY precision-molded offset spur gear 72T 48P, strategically lightened to reduce rotating mass. 



Composite Offset Spur Gear 76T / 48
#305776

XRAY precision-molded offset spur gear 76T 48P, strategically lightened to reduce rotating mass. 



Offset Spur Gear 78T/48
#305778

XRAY precision molded offset spur gear 78 tooth, 48 pitch. This spur gear has been strategically lightened to reduce rotating mass. 



Composite Offset Spur Gear 79T / 48
#305779

XRAY precision-molded offset spur gear 79T 48P, strategically lightened to reduce rotating mass. 



Composite Spur Gear H 84T / 48 - Orange
#305784-O

XRAY precision molded spur gear 84 tooth, 48 pitch. 



Composite Offset Spur Gear 90T / 64
#305860

XRAY precision molded offset spur gear 90 tooth, 64 pitch 



Composite Offset Spur Gear 92T / 64
#305862

XRAY presents new additions to the range of precision-molded 64-pitch offset spur gears made from special hard composite material, strategically lightened to reduce rotating mass without compromising strength or durability. 



Composite Offset Spur Gear 96T / 64 - Orange
#305866-O

XRAY precision molded offset spur gear 96 tooth, 64 pitch. 



Composite Offset Spur Gear 99T / 64
#305869

Addition to the range of precision-molded 64-pitch offset spur gears made from special hard composite material, strategically lightened to reduce rotating mass without compromising strength or durability. 



Composite Offset Spur Gear 100T / 64
#305870

XRAY presents new additions to the range of precision-molded 64-pitch offset spur gears made from special hard composite material, strategically lightened to reduce rotating mass without compromising strength or durability. 



Composite Offset Spur Gear 100T / 64 - Orange
#305870-O

XRAY precision molded offset spur gear 100 tooth, 64 pitch. 



Offset Spur Gear 104T/64
#305874

XRAY precision molded offset spur gear 104 tooth, 64 pitch. This spur gear has been strategically lightened to reduce rotating mass. 



Offset Spur Gear 106T/64
#305876

XRAY precision molded offset spur gear 106 tooth, 64 pitch. This spur gear has been strategically lightened to reduce rotating mass. 



Composite Offset Spur Gear 110T / 64 - Orange
#305880-O

XRAY precision molded offset spur gear 110 tooth, 64 pitch. 



Narrow Pinion Gear Alu Hard Coated 24T/48
#305924

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 



Narrow Pinion Gear Alu Hard Coated 25T/48
#305925

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 



Narrow Pinion Gear Alu Hard Coated 26T/48
#305926

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 



Narrow Pinion Gear Alu Hard Coated 27T/48
#305927

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 



Narrow Pinion Gear Alu Hard Coated 28T/48
#305928

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 



Narrow Pinion Gear Alu Hard Coated 29T/48
#305929

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 



Narrow Pinion Gear Alu Hard Coated 30T/48
#305930

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 



Narrow Pinion Gear Alu Hard Coated 31T/48
#305931

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 



Narrow Pinion Gear Alu Hard Coated 32T/48
#305932

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 



Narrow Pinion Gear Alu Hard Coated 33T/48
#305933

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 



Narrow Pinion Gear Alu Hard Coated 34T/48
#305934

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 



Narrow Pinion Gear Alu Hard Coated 31T/64
#305981

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 



Narrow Pinion Gear Alu Hard Coated 32T/64
#305982

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 



Narrow Pinion Gear Alu Hard Coated 33T/64
#305983

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 



Narrow Pinion Gear Alu Hard Coated 34T/64
#305984

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 



Narrow Pinion Gear Alu Hard Coated 35T/64
#305985

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 



Narrow Pinion Gear Alu Hard Coated 36T/64
#305986

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 



Narrow Pinion Gear Alu Hard Coated 37T/64
#305987

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 



Narrow Pinion Gear Alu Hard Coated 38T/64
#305988

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 



Alu Narrow Pinion Gear - Hard Coated 39T / 64
#305989

These narrow pinions are manufactured by XRAY on a specially-modified precision gear machine for ultra-precise tolerances and unparalleled concentricity.  



Narrow Pinion Gear Alu Hard Coated 40T/64
#305990

These narrow pinions are manufactured by XRAY on a specially-modified precision gear machine which has ultra-precise tolerances and assures unparalleled concentricity. After machining, the edges of pinions are chamfered and then the pinions are run in. The pinions are then specially treated to give them an even hardcoating so they stay absolutely true for a long time.  



Alu Narrow Pinion Gear 41T / 64 - Hardcoated
#305991

These narrow pinions are manufactured by XRAY on a specially-modified precision gear machine which has ultra-precise tolerances and assures unparalleled concentricity. After machining, the edges of pinions are chamfered and then the pinions are run in. The pinions are then specially treated to give them an even hardcoating so they stay absolutely true for a long time. 



Narrow Pinion Gear Alu Hard Coated 42T/64
#305992

These narrow pinions are manufactured by XRAY on a specially-modified precision gear machine which has ultra-precise tolerances and assures unparalleled concentricity. After machining, the edges of pinions are chamfered and then the pinions are run in. The pinions are then specially treated to give them an even hardcoating so they stay absolutely true for a long time.  



Alu Narrow Pinion Gear - Hard Coated 43T / 64
#305993

These narrow pinions are manufactured by XRAY on a specially-modified precision gear machine for ultra-precise tolerances and unparalleled concentricity.  



Narrow Pinion Gear Alu Hard Coated 44T/64
#305994

These narrow pinions are manufactured by XRAY on a specially-modified precision gear machine which has ultra-precise tolerances and assures unparalleled concentricity. After machining, the edges of pinions are chamfered and then the pinions are run in. The pinions are then specially treated to give them an even hardcoating so they stay absolutely true for a long time.  



Narrow Pinion Gear Alu Hard Coated 46T/64
#305996

These narrow pinions are manufactured by XRAY on a specially-modified precision gear machine which has ultra-precise tolerances and assures unparalleled concentricity. After machining, the edges of pinions are chamfered and then the pinions are run in. The pinions are then specially treated to give them an even hardcoating so they stay absolutely true for a long time. v 



Alu Narrow Pinion Gear - Hard Coated 47T / 64
#305997

These narrow pinions are manufactured by XRAY on a specially-modified precision gear machine for ultra-precise tolerances and unparalleled concentricity.  



Narrow Pinion Gear Alu Hard Coated 48T/64
#305998

These narrow pinions are manufactured by XRAY on a specially-modified precision gear machine which has ultra-precise tolerances and assures unparalleled concentricity. After machining, the edges of pinions are chamfered and then the pinions are run in. The pinions are then specially treated to give them an even hardcoating so they stay absolutely true for a long time.  



Narrow Pinion Gear Alu Hard Coated 50T/64
#306000

These narrow pinions are manufactured by XRAY on a specially-modified precision gear machine which has ultra-precise tolerances and assures unparalleled concentricity. After machining, the edges of pinions are chamfered and then the pinions are run in. The pinions are then specially treated to give them an even hardcoating so they stay absolutely true for a long time.  



T4 Graphite Battery Strap for LiPo - Set
#306165

Pre-assembled Graphite Battery Strap for LiPo features the XRAY smart battery holder system and battery tweak-free mounting system. The alu capture wheel enables you to easily close and secure the battery strap without any clips. Black color. 



Alu LiPo Battery Backstop (F+R)
#306186

Set of alu LiPo battery backstops (F+R) to prevent LiPo battery movement on chassis. Ultra-strong construction provides long life and durability in even the most extreme racing conditions. CNC-machined from premium Swiss 7075 T6 aluminum to add weight to the car and improve balance. 



T4 Graphite Adjustable Battery Holder
#306188

Graphite adjustable battery holder allows for adjustment to eliminate battery play on the chassis. 

Product was discontinued! 



Graphite Battery Adj. Width Plate 3.0mm (2)
#306190

CNC-machined battery backstop, part of the adjustable battery holder for positioning batteries fore-aft/left-right.  



T4 Graphite + Alu Fully Adjustable Battery Holder
#306191

Innovative adjustable battery holder which allows to move the batteries front and rear but also left to right for easy and comfortable weight transfer adjustment. It allows to move the battery which changes the Front/Rear weight balance by 4mm.  



Alu Adjustable Battery Holder (2)
#306192-O

Alu adjustable battery holder available as spare part from set #306191. 



Alu Adjustable Battery Holder Backstop (2)
#306193-O

Alu adjustable battery holder backstop available as spare part from set #306191.  



T4 Graphite + Brass Fully Adjustable Battery Holder
#306194

Adjustable battery holder allows to move the batteries front and rear but also left to right for easy and comfortable weight transfer adjustment.  



T4'19 Graphite + Alu Fully Adjustable Battery Holder
#306196

Fully adjustable aluminum battery holder allows to move the batteries in all directions - front/rear and also left/right. The adjustable battery holder allows for easy and comfortable weight transfer adjustment.  



T4'19 Graphite + Brass Fully Adjustable Battery Holder
#306198

Fully adjustable brass battery holder allows to move the batteries in all directions - front/rear and also left/right. The adjustable battery holder allows for easy and comfortable weight transfer adjustment.  



Titan Suspension Pivot Pin (2)
#307217

Titanium lower inner pivot pins, ultra-precision hand ground for high durability and long life.  



Titan Front Arm Pivot Pin (2)
#307222

Titanium front lower outer pivot pins, ultra-precision hand ground for high durability and long life.  



Titan Rear Arm Pivot Pin (2)
#307322

Titanium rear lower outer pivot pins, ultra-precision hand ground for high durability and long life.  



ULP Alu Progressive Shock System - Set (2)
#308029

Innovative progressive shock system for ULP touring car shocks for improved traction and steering characteristics.  



Alu Shock Spring Retaining Collar (4)
#308031

Aluminum CNC-machined shock collars that can be used on the XRAY shock absorbers to increase the durability. Stylish and lightweight collars are CNC-machined from premium Swiss 7075 T6 aluminum and are strategically lightened. 



Alu XRAY Shock Spring Retaining Collar - Black (4)
#308031-K

Aluminum shock collars for use on XRAY shock absorbers to increase durability.  



Alu XRAY Shock Spring Retaining Collar - Orange (4)
#308031-O

Aluminum CNC-machined shock collars that can be used on the XRAY shock absorbers to increase the durability. Stylish and lightweight collars are CNC-machined from premium Swiss 7075 T6 aluminum and are strategically lightened. Set of four. Orange color. 



Composite Progressive Pistons (4)
#308038

Set of the composite molded pistons designed and produced to accommodate progressive shock system for touring cars. 



XRAY 4S Spring Set Progressive C=2.3-2.6 (2)
#308263

The all-new 4S progressive springs marked 2.3–2.6. 4S springs have been specifically designed to complement the SLP shocks and are 20mm long. Set of 2. 



XRAY 4S Spring Set Progressive C=2.5-2.8 (2)
#308264

The all-new 4S progressive springs marked 2.5–2.8. 4S springs have been specifically designed to complement the SLP shocks and are 20mm long. Set of 2. 



XRAY 4S Spring-Set C=2.3 (2)
#308274

The all-new linear 4S springs marked 2.3. 4S springs have been specifically designed to complement the SLP shocks and are 20mm long. Set of 2. 



XRAY 4S Spring-Set C=2.7 (2)
#308276

The all-new linear 4S springs marked 2.7. 4S springs have been specifically designed to complement the SLP shocks and are 20mm long. Set of 2. 



XRAY 4S Spring-Set C=2.9 (2)
#308277

The all-new linear 4S springs marked 2.9. 4S springs have been specifically designed to complement the SLP shocks and are 20mm long. Set of 2. 



XRAY 4S Spring Set C=2.8 (2)
#308288

Linear 4S springs marked 2.8. The 4S springs have been specifically designed to complement the SLP shocks and are 20mm long. Set of 2.
 



XRAY 4S Spring Set C=3.0 (2)
#308290

Linear 4S springs marked 3.0. 4S springs have been specifically designed to complement the SLP shocks and are 20mm long. Set of 2. 



Set of Ceramic Ball-Bearings (14)
#309002

Set of 14 high-performance ceramic ball-bearings for XRAY touring cars. Set of 5x10x4 bearings (10pcs) and 10x15x4 bearings (4pcs). 



Tires XXT-M W/O Belt for Low Grip Asphalt (2)
#309612

Rubber tires specially developed for low-grip asphalt. Fits most popular sizes of wheels and inserts. Set of 2.  



Tires XXT-M for Asphalt (2)
#309617

Rubber tires specially developed for medium & high-grip asphalt. Fits most popular sizes of wheels and inserts. Set of 2. 



Precision Balancing Chassis Weights (4 pcs.)
#309840

A complete set of 4 chassis balancing weights (2x 5g + 2x 10g) and mounting hardware. Designed for XRAY electric & nitro touring car to be mounted at pre-drilled chassis holes; also fits other race cars as well. Made from steel and laser engraved with the weight value for easy identification. 



Precision Balancing Chassis Weights Center 20g
#309853

Precision-machined brass chassis balancing weights. Designed for XRAY T3 LiPo chassis for mounting at pre-drilled chassis holes in the center of the car. Laser engraved with the weight value for easy identification. 20g weights. 



Precision Balancing Chassis Weights Center 30g
#309854

Precision-machined brass chassis balancing weights. Designed for XRAY T3 LiPo chassis for mounting at pre-drilled chassis holes in the center of the car. Laser engraved with the weight value for easy identification. 30g weights. 



Brass Battery Backstop
#309855

The stylish optional CNC-machined battery backstop made from brass material is used as a backstop and works also as an additional weight.  



XRAY Pure Tungsten Center Chassis Weight 30g
#309856

Machined 30g pure tungsten chassis weight. 



Short Lipo Balancing Chassis Weight 40g (2)
#309861

CNC-machined 40g chassis weights made from brass material and additionally black coated for astonishing look.  



XRAY Aluminum 1/10 Touring Set-Up Board - Limited Edition
#309901

Unique flat set-up board for 1/10 electric & nitro touring cars with stylish, full-colour XRAY graphics screen printed with your name and country flag.  



Alu Rear Wing Shim (2)
#353561

Alu rear wing shim for XB and XT series buggies and truggies. Provides additional support to prevent wing from pulling off from mounting screws. Set of 2. 



XRAY T4 Sticker for Body - White
#397326

Set of black & white transparent XRAY T4 stickers fits any 1/10th scale body, or looks great on your tool box as well. 



Ball-Bearing 10x15x4 Rubber Sealed - Grease (2)
#941014

High-speed ball-bearings manufactured specially for XRAY. ID x OD x thickness (mm) = 10x15x4.  



ID Product Name Released
305784-O Composite Spur Gear H 84T / 48 - Orange May 27, 2019
305866-O Composite Offset Spur Gear 96T / 64 - Orange May 27, 2019
305870-O Composite Offset Spur Gear 100T / 64 - Orange May 27, 2019
305880-O Composite Offset Spur Gear 110T / 64 - Orange May 27, 2019
309861 Short Lipo Balancing Chassis Weight 40g (2) May 08, 2019
302464 T4F Anti-Roll Bar Front 1.4mm Apr. 25, 2019
309856 XRAY Pure Tungsten Center Chassis Weight 30g Apr. 17, 2019
306196 T4'19 Graphite + Alu Fully Adjustable Battery Holder Apr. 11, 2019
306198 T4'19 Graphite + Brass Fully Adjustable Battery Holder Apr. 11, 2019
308290 XRAY 4S Spring Set C=3.0 (2) Feb. 20, 2019
303718-O Alu Lower 2-Piece Suspension 0.25 Eccentric Holder Stand Dec. 12, 2018
301337 Composite Rear 6mm Adjustable Body Mount Set +1mm Height Sep. 21, 2018
301338 Composite Rear 6mm Adjustable Body Mount Set +2mm Height Sep. 21, 2018
301390 Graphite Shim for Rear Body Post Adjustment 3.0mm (4) Sep. 21, 2018
302544-O Alu Shim for Radial Play Adjust. of Steering Arm -Orange (2) Sep. 21, 2018
303125-O Alu Shim 3x6x3.0mm - Orange (10) Sep. 10, 2018
303716-O Alu Lower 2-Piece Suspension Holder for ARS - Right - Low Mar. 26, 2018
303717-O Alu Lower 2-Piece Suspension Holder for ARS - Left - Low Mar. 26, 2018
303722-O Alu Rear Lower 1-Piece Suspension Holder - Rear - RR - Low Mar. 26, 2018
941014 Ball-Bearing 10x15x4 Rubber Sealed - Grease (2) Mar. 21, 2018
  

 
  T4 Is Double ETS Champion    
  XT8E Wins At 1/8 Off-Road ROAR E-Nats In US    
  GTX8 Is European Vice-Champion    
  XT8 Is US National Champion    
  XB4 & XT2 Are EOS 2016/2017 Champions    
  XB8E'17 Wins At The NEO Race    
  X12 Is Double European Champion    
  X12 Wins At 2017 ROAR Nationals    
  T4 Wins At 2017 TITC    
  XRAY T4 Double Win At Snowbird Nationals 2017    
  The largest and most powerful set-up sheet database in the world..    
 
     
  All artwork & webdesign by XRAY. All content © 1999 - 2009 by XRAY Terms of usePrivacy & security