xrayxrayHome XRAY homeXRAY X-shopXRAY X-forumRCAmerica
supportsearchcontactguestbooksite map
newsproductsaboutusworldwide headlines
click to enable quick search
 
Front Body Mount Set 6mm
#301322

Front body mount set includes redesigned 6mm-thick bodyposts and all other mounting hardware. Fits XRAY T2 and NT1. 



Rear Body Mount Set 6mm
#301332

Rear body mount set includes redesigned 6mm-thick bodyposts and all other mounting hardware. Fits XRAY T2 and NT1. 



Rear Body Mount Set +2mm Height
#301334

XRAY presents +2mm height-adjustable body posts for the T2 and NT1. For serious racers who focus on the small details, body height plays a very important role in the performance of the car and as such, ultra-fine body height tuning was developed by XRAY R&D engineers to address this increasingly important tuning set-up feature. 



Alu Adjustable Body Post Stop (2)
#301351-O

Very handy, easily externally adjustable body posts from Swiss 7075 T6 aluminum. Allows for adjustment of body height by 3mm without needing to change the position on the body post. 



Alu Adjustable Body Post Stop Nut (2)
#301352-O

Alu body post stop nut for #301351-O made from Swiss 7075 T6 aluminum. Spare part for #301351-O Alu Adjustable Body Post Stop (2). 



Set of Alu Shim (0.5mm, 1.5mm, 2.5mm)
#303120

Ultimate assortment of set-up shims. You can use the shims for easy and accurate adjustment of:
• front and rear roll center
• front bump steer
• front and rear toe-in
• wheelbase  



Set of Alu Shim (1.0mm, 2.0mm, 3.0mm)
#303121

Ultimate assortment of set-up shims. You can use the shims for easy and accurate adjustment of:
• front and rear roll center
• front bump steer
• front and rear toe-in
• wheelbase  



Alu Shim 3x6x0.5mm - Black (10)
#303121-K

Alu shims 3x6mm size, 0.5mm thick. Black color. Set of 10. 



Alu Shim 3x6x0.5mm - Orange (10)
#303121-O

Alu shims 3x6mm size, 0.5mm thick. Orange color. Set of 10. 



T2 Alu Shim 3x6x1.0mm (10)
#303122

Alu shims 3x6mm size, 1mm thick. Silver color, set of 10. 



Alu Shim 3x6x1.0mm - Black (10)
#303122-K

Alu shims 3x6mm size, 1mm thick. Black color, set of 10. 



T2 Alu Shim 3x6x2.0mm (10)
#303123

Alu shims 3x6mm size, 2mm thick. Silver color, set of 10. 



Alu Shim 3x6x2.0mm - Black (10)
#303123-K

Alu shims 3x6mm size, 2mm thick. Black color, set of 10. 



Alu Shim 3x6x3.0mm (10)
#303125

Alu shims 3x6mm size, 3mm thick. Set of 10. 



Alu Shim 3x6x3.0mm - Black (10)
#303125-K

Alu shims 3x6mm size, 3mm thick. Black color. Set of 10. 



Alu Shim 3x6x3.0mm - Orange (10)
#303125-O

Alu shims 3x6mm size, 3mm thick. Orange color. Set of 10. 



Alu Shim 3x5x2.0mm - Orange (10)
#303140-O

Alu shims 3x5mm, 2.0mm thick which can be used for various purposes including roll center adjustment. Orange color. Set of 10.

Color may slightly vary between products.
 



Alu Shim 3x5x1.0 (10)
#303141

Alu shims, 1.0mm thick, for rear roll center adjustment on XRAY T2. Set of 10. 



Alu Shim 3x5x0.5mm - Orange (10)
#303142-O

Alu shims 3x5mm, 0.5mm thick which can be used for various purposes including roll center adjustment. Orange color. Set of 10. 



Alu Shim 3x5x0.25mm (10)
#303143

Alu shims 3x5mm, 0.25mm thick which can be used for various purposes including roll center adjustment. Set of 10.  



Graphite Gear Diff Bevel & Satelitte Gears (2+4) - Lower
#304932

Gear differential internal gears precision made from new graphite composite mixture. Includes 2 bevel gears + 4 satellite gears.  



Alu Shock Spring Retaining Collar (4)
#308031

Aluminum CNC-machined shock collars that can be used on the XRAY shock absorbers to increase the durability. Stylish and lightweight collars are CNC-machined from premium Swiss 7075 T6 aluminum and are strategically lightened. 



Alu XRAY Shock Spring Retaining Collar - Black (4)
#308031-K

Aluminum shock collars for use on XRAY shock absorbers to increase durability.  



Alu XRAY Shock Spring Retaining Collar - Orange (4)
#308031-O

Aluminum CNC-machined shock collars that can be used on the XRAY shock absorbers to increase the durability. Stylish and lightweight collars are CNC-machined from premium Swiss 7075 T6 aluminum and are strategically lightened. Set of four. Orange color. 



Shock Adj. Nut Alu + O-ring
#308040

Set of four alu. spring-tension adjusting nuts and four O-rings to be inserted in them. O-rings prevent adjusting nuts from coming loose. 



Alu Cap For XRAY Shock Body #308322
#308327

CNC-machined aluminum shock lower cap for #308322 shock body. Set of two. 

Replaced by Alu Cap For XRAY Shock Body #308322 - Orange 



Composite Shock Parts - Rebound Hole - Short
#308332

One frame containing composite parts (except pistons) for two XRAY short shock absorbers. These new shock parts feature the upper shock cap with a hole which allows for faster, easier and more comfortable shocks rebound adjustment. Fits all XRAY electric and nitro touring shocks. 



Alu Shock Cap-Nut with Vent Hole (2)
#308352

Machined alu upper shock cap for XRAY Shock Absorber-Set 4-Step. Set of 2.

The upper aluminum cap features a small vent hole that makes shock assembly very predictable and easy, since excess shock oil will escape through this vent hole.  



Precision Balancing Chassis Weights (4 pcs.)
#309840

A complete set of 4 chassis balancing weights (2x 5g + 2x 10g) and mounting hardware. Designed for XRAY electric & nitro touring car to be mounted at pre-drilled chassis holes; also fits other race cars as well. Made from steel and laser engraved with the weight value for easy identification. 



XRAY Aluminum 1/10 Touring Set-Up Board - Limited Edition
#309901

Unique flat set-up board for 1/10 electric & nitro touring cars with stylish, full-colour XRAY graphics screen printed with your name and country flag.  



Composite Wide Bumper
#331201

Impact-absorbing wide lower front bumper for the NT1 is made from high-quality composite material to better absorb energy from crashes. 



Graphite Upper Holder for Bumper
#331216

Tough, strong, lightweight front upper bumper holder for NT1, CNC machined from thick, top-grade graphite. 



Foam Bumper - Hard
#331221

This new front bumper - made from extra-stiff yet lightweight closed-cell foam - will help to protect the car better and will not yield even in heavy collisions. Recommended for all racing conditions but especially for tracks with rigid or sharp perimeter boards. 



Composite Rear Body Back Stop (2)
#331340

Composite body back stop set for 1/10 touring cars (electric or nitro), made from lightweight composite material, provides support for the rear of body shell to prevent tucking under the rear wheels due to a collision from the rear, thus reducing lost racing time and increasing body lifespan. 



Suspension Arm Front Lower for Wire Anti-Roll Bar - Hard
#332113

Front lower suspension arm made from new hard composite material. Updated and modified to mount the new front wire anti-roll bar.  



Composite Suspension Arm for Set Screw - Front Upper
#332132

Molded front upper composite suspension arm. Redesigned to work with new front upper arm holder.  



Composite Suspension Arm for Set Screw - Front Upper - Hard
#332133

Front upper suspension arm made from new hard composite material, used on either left or right side. 



Composite Steering Block 1° King-Pin for Aero Disc - Right
#332213

RIGHT-side steering block with integrated 1° kingpin for improved in-corner steering.  



Composite Steering Block 1° King-Pin for Aero Disc - Left
#332223

LEFT-side steering block with integrated 1° kingpin for improved in-corner steering.  



Graphite Extension for Steering Block (2)
#332290

Steering block graphite extension, works on either left or right side. For use with # 332212 and #332222 Composite Steering Block for Aero Disc (Right, Left). Allows 3 different Ackermann positions adjustment for fine-tuning on all surfaces and track conditions. 



Downstop Independent Alu Front Anti-Roll Bar
#332401

The aluminum front anti-roll bar for the XRAY NT1 allows you to independently adjust the anti-roll bar from downstop, so that the downstop setting does not influence the performance of the anti-roll bar and vice versa.  

Replaced by Downstop Independent Alu Front Anti-Roll Bar - Orange 



Downstop Independent Alu Front Anti-Roll Bar - Orange
#332401-O

Aluminum front anti-roll bar for XRAY NT1 allows you to independently adjust the anti-roll bar from downstops, so that the downstop setting does not influence the performance of the anti-roll bar and vice versa. 



Anti-Roll Bar Front Female 0.7mm - Hudy Spring Steel™
#332441

Female front SOFT anti-roll bar blade 0.7mm for NT1 is CNC-machined from world-renowned HUDY Spring Steel™. Use with #332451 male front anti-roll bar blade 0.7mm. 



Anti-Roll Bar Front Male 0.7mm - Hudy Spring Steel™
#332451

Male front SOFT anti-roll bar blade 0.7mm for NT1 is CNC-machined from world-renowned HUDY Spring Steel™. Use with #332441 female front anti-roll bar blade 0.7mm. 



Anti-Roll Bar Front 1.8mm
#332479

Front wire anti-roll bar redesigned to work with the adjustable system which allows more comfortable adjustment of the bar as well as remove excessive play.  



Anti-Roll Bar Front 2.2mm
#332482

Front wire anti-roll bar redesigned to work with the adjustable system which allows more comfortable adjustment of the bar as well as remove excessive play.  



Anti-Roll Bar Front 2.4mm
#332484

Front wire anti-roll bar redesigned to work with the adjustable system which allows more comfortable adjustment of the bar as well as remove excessive play.  



Anti-Roll Bar Front 2.6mm
#332486

Front wire anti-roll bar redesigned to work with the adjustable system which allows more comfortable adjustment of the bar as well as remove excessive play.  



Anti-Roll Bar Front 2.8mm
#332488

Front wire anti-roll bar redesigned to work with the adjustable system which allows more comfortable adjustment of the bar as well as remove excessive play.  



Composite Suspension Arm Rear Lower - Hard
#333111

Rear lower suspension arm made from new hard composite material, used on either left or right side.  



Alu Anti-Roll Bar Collar o3.0 (2)
#333441

Alu anti-roll bar collars remove play from the front and rear anti-roll bar wires. 



Alu Anti-Roll Bar Collar o2.6 (2)
#333442

Alu anti-roll bar collars remove play from the front and rear anti-roll bar wires.  



Anti-Roll Bar For Ball-Bearings - Rear 1.8 mm
#333478

Rear wire anti-roll bar redesigned to work with the adjustable system which allows more comfortable adjustment of the bar as well as remove excessive play.  



Anti-Roll Bar For Ball-Bearings - Rear 2.2 mm
#333482

Rear wire anti-roll bar redesigned to work with the adjustable system which allows more comfortable adjustment of the bar as well as remove excessive play.  



Anti-Roll Bar For Ball-Bearings - Rear 2.4 mm
#333484

Rear wire anti-roll bar redesigned to work with the adjustable system which allows more comfortable adjustment of the bar as well as remove excessive play.  



Anti-Roll Bar For Ball-Bearings - Rear 2.6 mm
#333486

Rear wire anti-roll bar redesigned to work with the adjustable system which allows more comfortable adjustment of the bar as well as remove excessive play.  



Alu Brake Post Arm - Swiss 7075 T6
#334061

Aluminum brake post arm allows more direct and precise braking. Ultra-strong construction provides very long life and durability. CNC-machined from premium Swiss 7075 T6 aluminum.  

Replaced by Alu Brake Post Arm - Swiss 7075 T6 - Orange 



Alu Brake Post Arm - Swiss 7075 T6 - Orange
#334061-O

CNC-machined from premium Swiss 7075 T6 aluminum, this new brake post arm allows more direct and precise braking.  



Lightweight Ventilated Brake Disc - CNC Machined - Hardened
#334111

Lightweight, heat-treated and precision-ground ventilated brake disc for NT1. 



Brake Pad Ferodo® (2)
#334130

Ferodo® fiber brake pads for NT1, must be glued onto #334120 steel brake pads. Set of 2. 



Glued Brake Pad Set - Ultra-Efficient (2)
#334131

Factory pre-assembled brake pad set for consistent and precise braking. High-precision, ultra-efficient steel brake pads are CNC-machined and precision ground on both sides for an ultra-smooth surface finish to guarantee maximum braking efficiency.  

Product was discontinued! 



Brake Disk Adapter - Alu 7075 T6
#334140

CNC-machined brake disk adapter made from tough 7076 T6 alu. Includes factory-pressed pins (non-replaceable). 

Replaced by Alu Brake Disk Adapter - Swiss 7075 T6 - Orange 



Lightweight Brake Disk Adapter - Alu 7075 T6
#334141

For serious racers concentrating on weight savings, XRAY's new optional CNC-machined brake disk adapter is CNC-machined from tough 7076 T6 alu, and has been strategically lightened by 30% compared to the standard #334140 adapter. Rotating mass is reduced without sacrificing strength or durability. Includes factory-pressed pins (non-replaceable). 



Diff Outdrive Adapter - Hudy Spring Steel™ (2)
#335070

CNC-machined diff outdrive adaptor made from tough HUDY Spring Steel™. Shafts are precision ground and polished for smooth operation. Fits #335050 rear gear differential. Set of 2. 

Replaced by Lightweight Diff Outdrive Adapter - Hudy Spring Steel™ (2) 



Diff Outdrive Adapter - Long - Hudy Spring Steel™ (2)
#335071

CNC-machined diff outdrive adaptor made from tough HUDY Spring Steel™. Shafts are precision ground and polished for smooth operation. Fits #335000 front gear differential. Set of 2. 

Replaced by Lightweight Diff Outdrive Adapter - Long - Hudy Spring Steel™ (2) 



Alu Differential Pin - Hardcoated (2)
#335081

Alu hardcoated pins for NT1 gear differential are CNC-machined from premium lightweight Swiss 7075 T6 aluminum, hardcoated for extra durability and long life. Set of 2. 



XRAY Multi-Diff - One-Way - Solid - Set
#335100

Revolutionary, XRAY Multi-Diff™ (XRAY patent) is now offered for the NT1. This versatile front axle system offers three different settings: one-way / one-way solid / full-time solid axle. You can easily use the Multi-Diff™ as a standard one-way (left and right outdrives turn independently off-power), or lock the one-way out drives (both left and right outdrives turn together off-power), or you can fully lock the Multi-Diff™ and it will work as a full-time solid axle. 



Multi-Diff Main Axle
#335110

CNC-machined main axle for #335100 Multi-Diff™. Includes factory-pressed high-quality German one-way bearings, hand-ground for maximum running precision and strength. The one-way bearings must be serviced, cleaned, and oiled regularly (we recommend using #309580 One-way Lube). One-way bearings are not replaceable. 



Multi-Diff Locking Axle - Hudy Spring Steel™
#335120

CNC-machined locking axle for #335100 Multi-Diff™ is precision-machined from HUDY Spring Steel™. 



Inner Driveshaft Adapter - Hudy Spring Steel™
#335130

Precision-machined inner driveshaft adapters for use #335100 Multi-Diff™ for XRAY NT1. Includes hex hole in shaft end for #335120 locking axle. Manufactured from tough HUDY Spring Steel™. Shafts are precision ground and polished for smooth operation. 



XRAY Super-Light Solid Axle Set - Hudy Spring Steel™
#335180

For racers looking for smart weight savings and optimized rotating weight, XRAY offers this ultra-lightweight solid axle as a direct replacement for the standard diff or Multi-Diff™. This axle is 56% lighter than the standard Solid Axle, with a hollow axle for super-low rotating weight. The ultra-strong 1-piece solid axle is CNC-machined from world-renowned HUDY Spring Steel™, and includes lightweight aircraft aluminum pulley adapter. 



Alu Wheel Hub 12mm - Offset -0.75mm (2)
#335251

CNC-machined, premium aircraft aluminum -0.75mm offset wheel hubs for XRAY NT1, to give narrower track-width. These wheel hubs are strategically machined for optimum strength, balance, and lightness, and are marked for easy identification. Secured on drive axle by setscrew. Set of 2 hubs in each package. 



Alu Wheel Hub 12mm - Offset +0.75mm (2)
#335252

CNC-machined, premium aircraft aluminum +0.75mm offset wheel hubs for XRAY NT1, to give wider track-width. These wheel hubs are strategically machined for optimum strength, balance, and lightness, and are marked for easy identification. Secured on drive axle by setscrew. Set of 2 hubs in each package. 



Composite Wheel Hub (2)
#335255

Strong composite wheel hubs. Set of 2. 



Graphite Front Aerodynamic Disc 1.6mm - Left + Right - Set
#335270

CNC-machined high-strength graphite FRONT aerodynamic disks improve low & high-speed steering. 



CVD Rear Drive Shaft Set - Hudy Spring Steel™ (1)
#335305

This super-efficient and performance-enhancing rear CVD (constant velocity drives) set for the NT1 replaces the standard rear drive shaft and drive axle. Rebuildable with separately-available spare parts. Used for REAR only. Contains parts for ONE complete rear CVD only. 



Alu Rear Drive Shaft - Alu 7075 T6
#335321

Super-lightweight alu drive shafts, CNC-machined from premium Swiss 7075 T6 and hardcoated for extra durability and stylish looks. Laser engraved for easy identification. 



CVD Drive Shaft - 60mm - Hudy Spring Steel™
#335325

CVD universal drive shaft (60mm) for use with the rebuildable #335305 CVD rear drive shaft set for NT1. Manufactured from world-renowned HUDY Spring Steel™, this drive shaft has been strategically lightened without compromising strength. Use with #335215 CVD drive axle. Used for REAR CVD set only. 



Graphite Rear Aerodynamic Disc 1.6mm - Left + Right - Set
#335370

CNC-machined high-strength graphite REAR aerodynamic disks, improve traction and stability in high-speed corners. 



High-Performance Drive Belt Front 5.0x186mm - V2
#335431

High-performance front drive belt 5.5 x 186mm. 

Replaced by Low Friction Drive Belt Front 5.0x186mm 



Low Friction Drive Belt Front 5.0x186mm
#335432

Optional, specially-modified, high-performance front drive belt.  



High-Performance Drive Belt Side 4x396mm - V2
#335442

High-performance side drive belt 4.5 x 396mm. 

Replaced by Low Friction Drive Belt Side 4.5x396mm 



Low Friction Drive Belt Side 4.5x396mm
#335443

Optional, specially-modified, high-performance side drive belt.  



High-Performance Drive Belt Rear 5x177mm - V2
#335451

High-performance rear drive belt 5.5 x 177mm. 

Replaced by Low Friction Drive Belt Rear 5.5x177mm 



Low Friction Drive Belt Rear 5.5x177mm
#335452

Optional, specially-modified, high-performance rear drive belt. 



2-Speed - Set - V3
#335500

Complete 2-speed transmission set for NT1. Includes 54T and 59T molded composite spur gears, 2nd gear shoe set, alloy gear holders with integrated bearings, and all hardware. 



2-Speed Shaft - Lightweight
#335511

For serious racers that are conscious of weight savings, XRAY’s new optional lightweight 2-speed layshaft is precision ground, heat-treated and polished for smooth operation, extra strength, and long life, and has been strategically lightened by 50%.  



Carrier for 2-Speed Gear (2nd) - Alu 7075 T6 + Ball-Bearing
#335520

CNC-machined 2nd gear carrier (drum) made from tough 7075 T6 alu. Includes factory-pressed (non-replaceable) ball-bearing; the ball-bearing must be regularly serviced, cleaned, and oiled. 

Replaced by Alu Carrier for 2-Speed Gear (2nd) + Ball-B. - Orange 



Alu Carrier for 2-Speed Gear (2nd) + Ball-B. - Orange
#335520-O

CNC-machined 2nd gear carrier (drum) made from tough 7075 T6 aluminum. 

Replaced by Alu Lightw. Carrier for 2-Speed Gear (2nd) -7075 T6 - Orange 



Lightweight Carrier for 2-Speed Gear (2nd) - Alu 7075 T6 + Ball-Bearing - V2
#335521

For serious racers looking for smart weight savings and optimized rotating weight, XRAY's new optional lightweight 2nd gear carrier made from 7075 T6 alu has been strategically lightened compared to the standard #335520 carrier, reducing rotating weight without sacrificing strength or durability.  



Alu Lightw. Carrier for 2-Speed Gear (2nd) -7075 T6 - Orange
#335521-O

For serious racers looking for smart weight savings and optimized rotating weight, XRAY's optional lightweight 2nd gear carrier made from 7075 T6 alu has been strategically lightened compared to the standard #335520 carrier, reducing rotating weight without sacrificing strength or durability. Includes factory-pressed ball-bearing. 

Replaced by Lightweight Carrier for 2-Speed Gear (2nd) - Alu 7075 T6 + Ball-Bearing - V2 



Alu Small Carrier for 2-Speed Gear (2nd) + Ball-B. - 7075 T6
#335523

Optional 2nd-gear carrier (drum) CNC-machined from premium aluminum material.  



Alu Drive Flange with One-Way Bearing - 7075 T6 - Orange
#335530-O

CNC-machined 1st gear drive flange made from tough 7075 T6 aluminum.  



Lightweight Drive Flange with One-Way Bearing - Alu 7075 T6
#335531

For serious racers looking for smart weight savings and optimized rotating weight, XRAY's new optional lightweight 1st gear drive flange made from 7075 T6 alu has been strategically lightened compared to the standard #335530 flange, reducing rotating weight without sacrificing strength or durability.  

Replaced by Alu Lightweight Drive Flange W/One-Way B. - Orange 



Alu Lightweight Drive Flange W/One-Way B. - Orange
#335531-O

For serious racers looking for smart weight savings and optimized rotating weight, XRAY's new optional lightweight 1st gear drive flange made from 7075 T6 alu. 



Composite 2-Speed Gear Box Shoe Set
#335540

2-speed gearbox shoe set. Includes adjusting screws, roller pins, and hardware. 



Composite 2-Speed Gear 53T (2nd) - V3
#335553

XRAY precision molded 53T spur gear (2nd gear) made from special composite material which gives the spur gear an optimum balance of hardness, toughness, and flexibility thus providing long life, minimal wear, and minimizing breakage or teeth stripping. The spur gear remain strategically lightened to reduce rotating mass. The special composite material will withstand even the most extreme racing conditions which imparts high tension on the spur gears. 



Composite 2-Speed Gear 55T (2nd) - V3
#335555

XRAY precision molded 55T spur gear (2nd gear) made from special composite material which gives the spur gear an optimum balance of hardness, toughness, and flexibility thus providing long life, minimal wear, and minimizing breakage or teeth stripping. The spur gear remain strategically lightened to reduce rotating mass. The special composite material will withstand even the most extreme racing conditions which imparts high tension on the spur gears. 



Composite 2-Speed Gear 57T (1st)
#335557

XRAY precision molded 57 spur gear (1st gear) made from special composite material which gives the spur gear an optimum balance of hardness, toughness, and flexibility thus providing long life, minimal wear, and minimizing breakage or teeth stripping. The spur gear remain strategically lightened to reduce rotating mass. The special composite material will withstand even the most extreme racing conditions which imparts high tension on the spur gears. 



Composite 2-Speed Gear 58T (1st)
#335558

XRAY precision molded 58 spur gear (1st gear) made from special composite material which gives the spur gear an optimum balance of hardness, toughness, and flexibility thus providing long life, minimal wear, and minimizing breakage or teeth stripping. The spur gear remain strategically lightened to reduce rotating mass. The special composite material will withstand even the most extreme racing conditions which imparts high tension on the spur gears. 



Composite 2-Speed Gear 60T (1st)
#335560

XRAY precision molded 60 spur gear (1st gear) made from special composite material which gives the spur gear an optimum balance of hardness, toughness, and flexibility thus providing long life, minimal wear, and minimizing breakage or teeth stripping. The spur gear remain strategically lightened to reduce rotating mass. The special composite material will withstand even the most extreme racing conditions which imparts high tension on the spur gears. 



Adapter 2-Speed
#335570

CNC-machined 2-speed shoe adaptor made from high-tensile steel. 



Spring C=7.8 For Gear Box - Medium - Silver
#335581

Medium springs for #335540 Composite 2-Speed Gear Box Set allows for medium 2nd gear engagement point. Set of 2. 



Spring for Gear Box - Hard (2)
#335582

Harder springs for #335540 Composite 2-Speed Gear Box Set allows for higher 2nd gear engagement point. Set of 2. 



Graphite 2-Speed Gear 53T (2nd)
#335653

XRAY precision-molded spur gear (2nd gear). 



Graphite 2-Speed Gear 54T (2nd)
#335654

XRAY precision-molded spur gear (2nd gear). 



Graphite 2-Speed Gear 55T (2nd)
#335655

XRAY precision-molded spur gear (2nd gear). 



Graphite 2-Speed Gear 57T (1st)
#335657

XRAY precision-molded spur gear (1st gear). 



Graphite 2-Speed Gear 58T (1st)
#335658

XRAY precision-molded spur gear (1st gear). 



Graphite 2-Speed Gear 59T (1st)
#335659

XRAY precision-molded spur gear (1st gear).
 



Graphite 2-Speed Gear 60T (1st)
#335660

XRAY precision-molded spur gear (1st gear). 



Composite Belt Pulley Cover Set - Graphite
#335800-O

Set of molded composite pulley covers and collars.  



Low Friction Composite Belt Pulley Set - Graphite
#335801-O

A complete set of precision-molded, low-friction composite belt pulleys + covers, and collars made of specially-formulated graphite composite material that is a perfect balance of reliability and performance. 



Low Friction Composite Belt Pulley 20T - 2-Speed - Center - Graphite
#335810-O

Precision-molded, low-friction composite 20T belt pulley on main layshaft, drives rear belt.  



Low Friction Composite Belt Pulley 18T - 2-Speed - Side - Graphite
#335828-O

Precision-molded, low-friction composite 18T side belt pulley on 2-speed shaft, drives side belt.  



Low Friction Composite Belt Pulley 19T - Mid-Center - Graphite
#335859-O

Precision-molded, low-friction composite 19T front belt pulley on middle shaft, drives front belt.  



Low Friction Composite Belt Pulley 25T - Mid-Side - Graphite
#335885-O

Precision-molded, low-friction composite 25T mid-side belt pulley. Gives 1.04:1 overdrive ratio to front wheels.  



Low Friction Composite Belt Pulley 26T - Mid-Side - Graphite
#335886-O

Precision-molded, low-friction composite 26T mid-side belt pulley. Gives neutral 1:1 overdrive ratio.  



Alu 2-speed Belt Pulley 20T - Center - Set
#335910

Alu 20T belt pulley on main layshaft, drives rear belt. CNC-machined from premium lightweight Swiss 7075 T6 aluminum, hardcoated for extra durability and long life and has been strategically lightened. 

Product was discontinued! 



Alu Belt Pulley 18T 2-speed - Side - Set
#335928

Alu 18T side belt pulley on main layshaft, drives side belt. CNC-machined from premium lightweight Swiss 7075 T6 aluminum, hardcoated for extra durability and long life and has been strategically lightened. 

Product was discontinued! 



Alu Belt Pulley 19T - Mid-center - Set
#335959

Alu 19T front belt pulley on middle shaft, drives front belt. CNC-machined from premium lightweight Swiss 7075 T6 aluminum, hardcoated for extra durability and long life and has been strategically lightened. 

Product was discontinued! 



Alu Belt Pulley 25T - Mid-side - Set
#335985

Alu 25T mid-side belt pulley. Gives 1.04:1 overdrive ratio to front wheels. CNC-machined from premium lightweight Swiss 7075 T6 aluminum, hardcoated for extra durability and long life and has been strategically lightened. 

Product was discontinued! 



Alu Belt Pulley 26T - Mid-side - Set
#335986

Alu 26T mid-side belt pulley. Gives neutral 1:1 overdrive ratio. CNC-machined from premium lightweight Swiss 7075 T6 aluminum, hardcoated for extra durability and long life and has been strategically lightened.  



Rubber Receiver Case Cover
#336030

Molded rubber receiver case crystal cover. 



Graphite Receiver Bracket Set
#336040

Smart, stylish and functional, this optional receiver bracket is a direct replacement for the molded composite receiver case. The bracket is CNC-machined from premium-quality woven graphite material, and a composite antenna tube mount and all necessary mounting hardware complete the set. 



Receiver Switch - Set
#336060

Complete receiver switch set for NT1 fits directly into composite receiver case. Pre wired mechanical on/off switch for quick & easy powering/shutdown of onboard electronics. Molded rubber cover protects switch from contamination by fuel and dirt. Comes with Futaba J connectors. 



Graphite Personal Transponder Bracket
#336080

Smart and functional personal transponder mounting plate made from premium-quality graphite material. Includes mounting hardware for easy attachment to NT1 radio plate. 



Graphite Battery Plate
#336155

Optional CNC-machined plate made from premium-quality woven graphite material. Smart design and strong material increases chassis longitudinal stiffness, complementing the Multi-Flex Technology™ engine mount. 



Lipo Battery Plate
#336156

The exclusive LiPo tray was designed to accommodate the lower weight of the LiPo receiver battery pack compared to standard NiMH receiver battery packs. CNC-machined from a single piece of solid brass, the tray is additionally black coated for protection and laser engraved with the XRAY logo for authenticity. 



Brass Chassis Weight for NT1 30g
#336170

High-quality, CNC-machined brass chassis weight for NT1. 



Composite Antenna Mount
#336300

Molded antenna mount (from #336040 Graphite Receiver Bracket Set) made from tough composite material. 



Alu Pivot Ball 8.4mm - Swiss 7075 T6 - Hard Coated (4)
#337251

CNC-machined 8.4mm dia. mounting pivot ball, made from premium lightweight
7075 T6 aluminum. Set of 4.

A single alu pivot ball is 63% lighter than the steel counterpart; total combined weight saving of 18.8 grams on a car.
 



Alu Adjusting Nut M10x1 (4)
#337252

Alu M10 adjusting nut for capturing pivot balls in front steering blocks and rear uprights. Set of 4. 



Composite Ball Cup 8.4mm (8)
#337254

Molded composite ball cups for cushioning alu M10 alu adjusting nuts against 8.4mm pivot balls. Set of 8. 



Titan Pivot Ball 8.4mm (4)
#337255

Titanium 8.4mm pivot balls, ultra-precision hand ground for high durability and long life. Set of 4. 



XRAY Progressive Spring Set C=4.0-5.6 - Front (2)
#338182

New progressive springs marked 4.0-5.6 are soft at the beginning of the compression (similar to hardness 4.0) but become harder as the spring is compressed more in the middle, with hardness 5.6 at the end. 



XRAY Spring-Set C=4.7 - Soft-Medium - Front (2)
#338183

XRAY front spring set for NT1. Soft-Medium spring tension. Powder-coated dark-blue colour for easy identification. Complete set of 2 front springs. 



XRAY Spring-Set C=5.0 - Medium - Front (2)
#338184

XRAY front spring set for NT1. Medium spring tension. Powder-coated violet colour for easy identification. Complete set of 2 front springs. 



XRAY Spring-Set D=1.8 (35.5 LB) Purple - Medium-Hard - Front (2)
#338186

XRAY front spring set for NT1. Medium-Hard spring tension. Powder-coated purple colour for easy identification. Complete set of 2 front springs. 



Spring-Set C=6.3 - Hard - Front (2)
#338187

XRAY front spring set for NT1. Hard spring tension. Powder-coated light-red colour for easy identification. Complete set of 2 front springs. 



XRAY Progressive Spring Set C=3.7-4.7 - Rear (2)
#338281

New progressive springs marked 3.7–4.7 are soft at the beginning of the compression (similar to hardness 3.7) but become harder as the spring is compressed more in the middle, with hardness 4.7 at the end.  



Spring-Set C=3.6 - Soft-Medium Hard - Rear (2)
#338286

XRAY rear spring set for NT1. Different spring tensions to fine tune your car. Powder-coated for easy identification. Developed from extensive testing and racing experience, these racing shock springs were designed and precision-crafted to have a unique spring characteristic. Set of 2 springs. 



Spring-Set C=4.5 - Medium-Medium Hard - Rear (2)
#338287

XRAY rear spring set for NT1. Different spring tensions to fine tune your car. Powder-coated for easy identification. Developed from extensive testing and racing experience, these racing shock springs were designed and precision-crafted to have a unique spring characteristic. Set of 2 springs. 



XRAY Springs - Set D=1.9 (35 LB) Light Red - Hard - Rear (2)
#338288

XRAY rear spring set for NT1. Different spring tensions to fine tune your car. Powder-coated for easy identification. Developed from extensive testing and racing experience, these racing shock springs were designed and precision-crafted to have a unique spring characteristic. Set of 2 springs. 



XCA (XRAY Centrifugal-Axial) Clutch Set
#338500

Complete XCA (XRAY Centrifugal-Axial) clutch set. Includes 16T and 21T clutchbell pinion gears. 



XCA (XRAY Centrifugal-Axial) Clutch Set - High Dynamic
#338501

This complete clutch set includes redesigned components which create a more dynamic clutch engagement suitable for most racing conditions. Included are a super-lightweight flywheel, new black reinforced clutch flyweights, new smaller and super lightweight clutchbell, smaller diameter yellow clutch shoe, new medium-hardness clutch spring, and new alu clutch disc.  



Clutch Bell - Hudy Steel
#338510

Ultra-strong CNC-machined XCA clutchbell made from special HUDY Steel. Universal design allows quick & easy changing of threaded pinion gears. 



Lightweight Clutch Bell - Hudy Steel
#338511

For serious racers looking for smart weight savings and optimized rotating weight, XRAY's new optional lightweight XCA clutchbell made from ultra-strong HUDY Steel has been strategically lightened compared to the standard #338510 clutchbell, reducing rotating weight without sacrificing strength or durability. 

Product was discontinued! 



Alu Clutch Bell - Swiss 7075 T6 (7mm) - Hard Coated
#338512

Racers looking for smart weight savings and optimized rotating weight will benefit from using XRAY's new optional lightweight XCA clutchbell made from CNC-machined premium Swiss 7075 T6 aluminum, hardcoated for extra durability and long life. 



Alu Nickel Coated Lightweight Clutch Bell 26mm -High-Dynamic
#338514

Lightweight XCA alu clutch bell made from CNC-machined premium Swiss 7075 T6 aluminum, nickel coated.  



XCA Alu 7075 T6 Hardcoated Pinion Gear - 15T (1st)
#338515

High-strength 15T pinion gear (1st gear) for the XRAY NT1 are made from tough 7075 T6 alu and specially hardcoated for supreme strength, light weight, and high durability. Created on a special gear machine, all pinions feature ultra-precise tooth shaping and ultra-true running for vibration-free operation.  



XCA Alu 7075 T6 Hardcoated Pinion Gear - 17T (1st)
#338517

High-strength 17T pinion gear (1st gear) for the XRAY NT1 are made from tough 7075 T6 alu and specially hardcoated for supreme strength, light weight, and high durability.  



XCA Alu 7075 T6 Hardcoated Pinion Gear - 18T (1st)
#338518

High-strength 18T pinion gear (1st gear) for the XRAY NT1 are made from tough 7075 T6 alu and specially hardcoated for supreme strength, light weight, and high durability. 



XCA Alu 7075 T6 Hardcoated Pinion Gear - 20T (2nd)
#338520

High-strength 20T pinion gear (2nd gear) for the XRAY NT1 are made from tough 7075 T6 alu and specially hardcoated for supreme strength, light weight, and high durability.  



XCA Alu 7075 T6 Hardcoated Pinion Gear - 22T (2nd)
#338522

High-strength 22T pinion gear (2nd gear) for the XRAY NT1 are made from tough 7075 T6 alu and specially hardcoated for supreme strength, light weight, and high durability.  



XCA Alu 7075 T6 Hardcoated Pinion Gear - 23T (2nd)
#338523

High-strength 23T pinion gear (2nd gear) for the XRAY NT1 are made from tough 7075 T6 alu and specially hardcoated for supreme strength, light weight, and high durability.  



XCA Alu 7075 T6 Hardcoated Pinion Gear - 24T (2nd)
#338524

High-strength 24T pinion gear (2nd gear) for the XRAY NT1 made from tough 7075 T6 alu, specially hardcoated for supreme strength, light weight, and superior durability. 



Flywheel - Alu 7075 T6 - Hardcoated
#338530

XCA flywheel made from tough 7075 T6 alu and hardcoated for extra durability. Highly-polished, smooth flyweight pins are factory-pressed. Knurled outer edge for easy starting on starterbox. 



Lightweight Flywheel - Alu 7075 T6 - Hard Coated
#338531

The optional lightweight XCA flywheel is made from tough 7075 T6 hardcoated alu and has been strategically lightened by 20% compared to the standard #338530 flywheel, reducing rotating weight without sacrificing strength or durability. 



Flywheel - Alu 7075 T6 - Hardcoated - High Dynamic
#338532

Super-lightweight High-dynamic XCA flywheel for the High-dynamic XCA Clutch Set. Made from tough 7075 T6 hardcoated alu and strategically lightened to reduce rotating weight without sacrificing strength or durability. 



Alu Flywheel Reverse XCA- Flat - Swiss 7075 T6 - Hard - 30mm
#338534

Super-lightweight XCA flywheel for the XCA Reverse Clutch. Made from tough 7075 T6 hardcoated alu, strategically lightened to reduce rotating weight without sacrificing strength or durability. 30mm diameter, recommended for use when lowering the engine for lower CG. 



Flywheel Collar 7mm
#338540

XCA clutch flywheel collar for Novarossi-based engines (7mm). 



Flywheel Collar 6mm - Picco
#338541

XCA clutch flywheel collar for Picco-based engines (6mm). 



Clutch Flyweight - Black (3) - V2
#338560

CNC-machined, precision-cut XCA clutch flyweights. Set of 3. 



Clutch Disk - Alu 7075 T6
#338570

CNC-machined XCA clutch shoe support disk made from tough 7075 T6 alu. 



Alu Clutch Disc - High Dynamic - Swiss 7075 T6
#338571

High-dynamic alu clutch disc for the High-dynamic XCA Clutch Set supports the #338577 yellow clutch shoe. CNC-machined from tough 7075 T6 alu. 



Clutch Shoe - White
#338574

CNC-machined white clutch shoe for XCA clutch. Material in this clutch shoe is softer and gives higher initial bite but also more slippage and wear. 



Clutch Shoe - Yellow
#338575

CNC-machined yellow clutch shoe for XCA clutch. Material in this clutch shoe is harder and gives less slippage and wear.

Fits only #338570 Clutch Disk 



Clutch Shoe - High Dynamic - Red
#338578

High-dynamic Red clutch shoe for the High Dynamic XCA Clutch Set has a new smaller diameter. CNC-machined from hard red clutch material. Provides less slippage and wear. Recommended for medium- and high-traction tracks. 



Clutch Spring
#338580

Clutch spring for XCA clutch. 



Clutch Spring - Hard
#338582

Hard clutch spring for XCA clutch allows for later clutch engagement at higher RPM. Beneficial on open, high-speed tracks with high traction.  

Replaced by Clutch Spring - Ultra-Stabile 



XRAY NT1 Conical Clutch Washer Spring - Set
#338583

New conical clutch washer springs offer more consistent clutch operation for maximum punch. 



Fuel Tank 75CC - Set - V2
#338601

Quick-fill low CG 75cc fuel tank set for NT1 features a pressure cap with a 1-piece profiled seal for perfect fitment and sealing. Includes tank inserts to limit the fuel capacity, and 3mm shims for lower the tank when used with optional micro-size receiver battery pack. Includes integrated stone filter and splashguard. 

Replaced by Fuel Tank 75cc - Set - V3 



Fuel Tank Capacity Sticker
#338690

Fuel level indicator for XRAY fuel tank in the form of a white transparent die-cut sticker. Displays fuel measurement in 5cl increments. Set of 4.  



Alu Monoblock Engine Mount
#338713

XRAY optional Monoblock Engine Mount for NT1 provides solid engine mounting and easy adjustment. The unique keyed-mount design allows for the easy removal and replacement of the engine without the need for gear mesh re-adjustment after every replacement. 



NT1'16 Brass 1-Piece Engine Mount
#338721

Optional brass engine mount for NT1'16 provides solid engine mounting and easy adjustment.  



XRAY NT1 Pinion Gear Tool Set (20~23T , 15~18T)
#339901

Set of two (2) XCA-clutch pinion gear tools to help install and remove pinon gears to/from the XCA clutchbell. The tools are moulded from a special composite mixture which ensures very high durability will ensure very precise fitting to the pinions.  



Alu Cutted Anti-Roll Bar Collar o3.1 - Black (2)
#343481-K

Alu anti-roll bar collars remove play from the front and rear anti-roll bar wires. 



Alu Cutted Anti-Roll Bar Collar o2.7 - Black (2)
#343482-K

Alu anti-roll bar collars remove play from the front and rear anti-roll bar wires.  



Alu Middle Shaft Locating Collar - Short - Lightweight
#345732

Stylish-lightened alu locating collar for #345721 alu front middle shaft holder made from tough 7076 T6.  

Replaced by Alu Middle Shaft Locating Collar Short - Lightw. - Orange 



Clutch Spring - Ultra-Stabile
#348541

Ultra-stabile clutch spring. Characteristics of the spring remain constant during long runs.  



Silicone Tubing 1m (2.4 x 5.5mm) Fluorescent Yellow
#358951

Thick silicone fuel tubing. 2.4mm ID, 1m length. Fluorescent yellow colour. 



Ball End 4.9mm With Thread 8mm (2)
#362651

Threaded 4.9mm ball end with 8mm thread length for connection to molded ball joints. Set of 2. 



Spring 4.0 Coils 3.6x6x0.5mm, C=3.5 - Gold (2)
#372180

Ultimate-match front coil shock springs for pan car front suspension offer an additional range of choices to fine-tune your car. Powder color-coded for quick & easy identification. Gold color. Set of 2.
 



XRAY NT1 Sticker for Body - White
#397331

Bold-looking black/white decals will add a dramatic touch to your NT1. Self-adhesive for quick and easy application. 



Hex Screw SFH M2x4 (10)
#903204

M2x4 flat-head machine screw, hex drive. Set of 10 pieces.  



Hex Screw SFH M2x6 - .050
#903205

M2x6 flat-head machine screw, 0.050" hex drive. Set of 10 pieces.  



Hex Screw Socket Head Cap M2.5x12 (10)
#908262

M2.5x12 socket-head cap screw, hex drive. Set of 10 pieces.  



Ceramic Axial Thrustbearing F5-10 5x10x4
#930250

High-precision axial thrustbearing 5x10x4mm for XCA clutch features ceramic balls. Highest-quality material and design guarantees the smoothest clutch operation and increased life. Ceramic balls in the axial cage are made from extra-hard Si3N4 silicone nitride ceramic. Significantly improves lifespan while reducing friction and vibration. Higher RPM capabilities. 



Alu Nut M3 (10)
#960031

M3 alu locking nuts. Set of 10. 



Nut M4 with Serrated Flange
#960240

High-quality M4 nut with serrated flange. Set of 10. 



Pin 2x12 (10)
#980213

Polished chrome pin. Dia. x length = 2mm x 11.8mm. Set of 10 pieces. 



Pin 2x14 (10)
#981214

Polished chrome pin. Dia. x length = 2mm x 14mm. Set of 10 pieces. 



ID Product Name Released
332479 Anti-Roll Bar Front 1.8mm Mar. 18, 2019
332482 Anti-Roll Bar Front 2.2mm Mar. 18, 2019
332484 Anti-Roll Bar Front 2.4mm Mar. 18, 2019
332486 Anti-Roll Bar Front 2.6mm Mar. 18, 2019
332488 Anti-Roll Bar Front 2.8mm Mar. 18, 2019
333441 Alu Anti-Roll Bar Collar o3.0 (2) Mar. 18, 2019
333442 Alu Anti-Roll Bar Collar o2.6 (2) Mar. 18, 2019
333478 Anti-Roll Bar For Ball-Bearings - Rear 1.8 mm Mar. 18, 2019
333482 Anti-Roll Bar For Ball-Bearings - Rear 2.2 mm Mar. 18, 2019
333484 Anti-Roll Bar For Ball-Bearings - Rear 2.4 mm Mar. 18, 2019
333486 Anti-Roll Bar For Ball-Bearings - Rear 2.6 mm Mar. 18, 2019
343482-K Alu Cutted Anti-Roll Bar Collar o2.7 - Black (2) Mar. 18, 2019
335432 Low Friction Drive Belt Front 5.0x186mm Dec. 05, 2018
335443 Low Friction Drive Belt Side 4.5x396mm Dec. 05, 2018
335452 Low Friction Drive Belt Rear 5.5x177mm Dec. 05, 2018
303125-O Alu Shim 3x6x3.0mm - Orange (10) Sep. 10, 2018
335800-O Composite Belt Pulley Cover Set - Graphite May 21, 2018
335801-O Low Friction Composite Belt Pulley Set - Graphite May 21, 2018
335810-O Low Friction Composite Belt Pulley 20T - 2-Speed - Center - Graphite May 21, 2018
335828-O Low Friction Composite Belt Pulley 18T - 2-Speed - Side - Graphite Mar. 20, 2018
  

 
  T4 Is Double ETS Champion    
  XT8E Wins At 1/8 Off-Road ROAR E-Nats In US    
  GTX8 Is European Vice-Champion    
  XT8 Is US National Champion    
  XB4 & XT2 Are EOS 2016/2017 Champions    
  XB8E'17 Wins At The NEO Race    
  X12 Is Double European Champion    
  X12 Wins At 2017 ROAR Nationals    
  T4 Wins At 2017 TITC    
  XRAY T4 Double Win At Snowbird Nationals 2017    
  The largest and most powerful set-up sheet database in the world..    
 
     
  All artwork & webdesign by XRAY. All content © 1999 - 2009 by XRAY Terms of usePrivacy & security