xrayxrayHome XRAY homeXRAY X-shopXRAY X-forumRCAmerica
supportsearchcontactguestbooksite map
newsproductsaboutusworldwide headlines
click to enable quick search
 
Alu Shim 3x6x1.0mm - Black (10)
#303122-K

Alu shims 3x6mm size, 1mm thick. Black color, set of 10. 



T2 Alu Shim 3x6x1.0mm - Orange (10)
#303122-O

Alu shims 3x6mm size, 1mm thick. Orange color, set of 10. 



Alu Shim 3x6x2.0mm - Black (10)
#303123-K

Alu shims 3x6mm size, 2mm thick. Black color, set of 10. 



T2 Alu Shim 3x6x2.0mm - Orange (10)
#303123-O

Alu shims 3x6mm size, 2mm thick. Orange color, set of 10. 



Alu Anti-Roll Bar Pivot ball 5.8mm - Hard Coated (2)
#333451

CNC-machined 5.8mm dia ball joint for anti-roll bar, made from premium lightweight 7075 T6 aluminum. Set of 2. 



Spring C=7.8 For Gear Box - Medium - Silver
#335581

Medium springs for #335540 Composite 2-Speed Gear Box Set allows for medium 2nd gear engagement point. Set of 2. 



Alu Carrier for 2-Speed Gear (2nd) - Swiss 7075 T6 - Orange
#345520-O

2nd gear carrier (drum) CNC-machined from tough Swiss 7075 T6 alu. Orange color. 



Alu Drive Flange w/One-Way Bearing - Swiss 7075 T6 - Orange
#345530-O

1st gear drive flange CNC-machined from tough Swiss 7075 T6 aluminum. Includes factory-pressed (non-replaceable) high-quality German one-way bearing, hand-ground for maximum running precision and strength. 

Replaced by Alu Drive Flange with One-Way Bearing - Swiss 7075 T6 



Composite 2-Speed Gear 45T (2nd)
#345545

XRAY precision-molded 45T spur gear (2nd gear) made from special composite material with optimal balance of hardness, toughness, and flexibility. Gives long life, minimal wear, and minimizing breakage and teeth stripping. Strategically lightened to reduce rotating mass.  



Composite 2-Speed Gear 47T (2nd)
#345547

XRAY precision-molded 47T spur gear (2nd gear) made from special composite material with optimal balance of hardness, toughness, and flexibility. Gives long life, minimal wear, and minimizing breakage and teeth stripping. Strategically lightened to reduce rotating mass. 



Composite 2-Speed Gear 48T (1st)
#345548

XRAY precision-molded 48T spur gear (1st gear) made from special composite material with optimal balance of hardness, toughness, and flexibility. Gives long life, minimal wear, and minimizing breakage and teeth stripping. Strategically lightened to reduce rotating mass. 



Composite 2-Speed Gear 50T (1st)
#345550

XRAY precision-molded 50T spur gear (1st gear) made from special composite material with optimal balance of hardness, toughness, and flexibility. Gives long life, minimal wear, and minimizing breakage and teeth stripping. Strategically lightened to reduce rotating mass. 



Graphite 2-Speed Gear 45T (2nd)
#345645

XRAY precision-molded spur gear (2nd gear). 



Graphite 2-Speed Gear 46T (2nd)
#345646

XRAY precision-molded spur gear (2nd gear). 



Graphite 2-Speed Gear 47T (2nd)
#345647

XRAY precision-molded spur gear (2nd gear). 



Graphite 2-Speed Gear 48T (1st)
#345648

XRAY precision-molded spur gear (1st gear). 



Graphite 2-Speed Gear 49T (1st)
#345649

XRAY precision-molded spur gear (1st gear). 



Graphite 2-Speed Gear 50T (1st)
#345650

XRAY precision-molded spur gear (1st gear). 



XCA Alu Pinion Gear - 15T (1st) - 7075 T6 - Hard Coated
#348515

High-strength 15T pinion gear (1st gear) made from tough 7075 T6 alu and specially hardcoated for superior strength, light weight, and high durability. 



XCA Alu Pinion Gear - 17T (1st) - 7075 T6 - Hard Coated
#348517

High-strength 17T pinion gear (1st gear) made from tough 7075 T6 alu and specially hardcoated for superior strength, light weight, and high durability.  



XCA Alu Pinion Gear - 18T (1st) - 7075 T6 - Hard Coated
#348518

High-strength 18T pinion gear (1st gear) made from tough 7075 T6 alu and specially hardcoated for superior strength, light weight, and high durability.  



XCA Alu Pinion Gear - 20T (2nd) - 7075 T6 - Hard Coated
#348520

High-strength 20T pinion gear (2nd gear) made from tough 7075 T6 alu and specially hardcoated for superior strength, light weight, and high durability.  



XCA Alu Pinion Gear - 21T (2nd) - 7075 T6 - Hard Coated
#348521

High-strength 21T pinion gear (2nd gear) made from tough 7075 T6 alu and specially hardcoated for superior strength, light weight, and high durability.  



XRAY RX8 Pinion Gear Tool Set (16~18z , 19~21z)
#349901

Set of two (2) XCA-clutch pinion gear tools aids in installing and removing XCA clutchbell pinion gears.  



XRAY XB8/GTX C-Hub Front Suspension Conversion Set
#350907

Complete C-hub conversion set for GTX platform fits both nitro and electric powered GTX. The C-hub suspension is suited for most standard track conditions and makes the car more responsive and increases steering resulting into faster lap times.  



XB8'16 Chassis Side Guards L+R
#351159

All-new redesigned side guards incorporate a larger bottom radius to make the car more stable on rough tracks, and increase the car’s longitudinal flex. 



Composite Chassis Side Guard L+R - Soft
#351159-S

The composite side guards protect the car, muffler, and fuel tank from side impacts. The side guards perfectly fit the chassis and seal against dirt. Molded from SOFT composite mixture for increased flex to generate more traction.
 



GT Foam Bumper - Light
#351222

Lightweight version of GTX8 front bumper.  



XB8'16 Graphite Upper Plate
#351348

Graphite front plate is CNC-machined from high-grade carbon graphite, ensuring highest strength with lightest weight.  



XB8 Composite Front Lower Suspension Arm
#352117

Front lower suspension arm for XB8 made from super-tough, high-tech composite material. Universal design allows the arm to be used on either left or right sides. 

Replaced by XB8 Composite Front Lower Suspension Arm 



XB8 Composite Front Lower Suspension Arm
#352120

Front lower suspension arm for XB8 made from super-tough, high-tech composite material. 



XB8 Composite Front Lower Suspension Arm - Graphite
#352120-G

Molded lightweight front LOWER suspension arm made from specially-formulated graphite composite material.  



XB8 C-Hub Composite Front Lower Suspension Arm - Medium
#352121

Front lower suspension arm for C-hub suspension molded from medium hardness composite mixture. 



XB8 C-Hub Composite Front Lower Suspension Arm - Graphite
#352121-G

Front lower suspension arm for C-hub suspension molded from specially-formulated graphite composite material.  



XB8 C-Hub Composite Front Lower Suspension Arm - Hard
#352121-H

Front lower suspension arm for C-hub suspension molded from a new hard composite mixture.  



XB8 C-Hub Composite Front Lower Suspens. Arm - Short - Soft
#352121-S

Front lower suspension arm for C-hub suspension molded from soft hardness composite mixture, super-tough, high-tech composite material. 



XB8 C-Hub Composite Steering Block LB with Alu Inserts
#352245

Front C-hub steering block molded from specially formulated composite material. Features alu inserts for increased durability. Fits larger outside ball-bearings for increased reliability and life-span. 



Alu Caster Block 16° Right - Swiss 7075 T6
#352276

Authentic XRAY RIGHT-side 16° alu caster block is CNC-machined from premium Swiss 7075 T6 aluminum.  



Composite C-Hub 16° Right
#352277

Molded composite C-hub for RIGHT steering block. Made from high-tech composite material. Caster pre-set at 16°. For use with matching left-side C-hub #352287.  



Alu Caster Block 16° Left - Swiss 7075 T6
#352286

Authentic XRAY LEFT-side 16° alu caster block is CNC-machined from premium Swiss 7075 T6 aluminum.  



Composite C-Hub 16° Left
#352287

Molded composite C-hub for LEFT steering block. Made from high-tech composite material. Caster pre-set at 16°. For use with matching right-side C-hub #352277. 



XB8 Front Anti-Roll Bar 1.6mm
#352487

Front anti-roll bar for XB8, XT8 & GTX8 cars, 1.6mm thick.  



XB8 Front Anti-Roll Bar 1.8mm
#352489

Front anti-roll bar for XB8, XT8 & GTX8 cars, 1.8mm thick.  



XB8 Front Anti-Roll Bar 2.0mm
#352490

Front anti-roll bar for XB8, XT8 & GTX8 cars, 2.0mm thick.  



XB8 Front Anti-Roll Bar 2.2mm
#352492

Front anti-roll bar for XB8, 2.2mm thick. Laser-engraved for easy identification. 



XB8 Front Anti-Roll Bar 2.3mm
#352493

Front anti-roll bar for XB8, 2.3mm thick. Laser-engraved for easy identification.
 



XB8 Front Anti-Roll Bar 2.4mm
#352494

Front anti-roll bar for XB8, 2.4mm thick. Laser-engraved for easy identification. 



XB8 Front Anti-Roll Bar 2.5mm
#352495

Front anti-roll bar for XB8, 2.5mm thick. Laser-engraved for easy identification. 



XB8 Front Anti-Roll Bar 2.6mm
#352496

Front anti-roll bar for XB8, 2.6mm thick. Laser-engraved for easy identification. 



XB8 Composite Servo Saver Upper Arm - Graphite
#352514

Molded composite parts for XB8 servo saver.  



XB9 Composite Rear Lower Suspension Arm
#353115

Rear lower suspension arm for XB9 made from super-tough high-tech composite material. Smart, universal design allows the same front arm to be used on both left and right sides. 



XB9 Composite Rear Lower Suspension Arm - Hard
#353116

All-new hard XB9 suspension arm moulded from a new blend of XRAY's proprietary composite material.  



Composite Rear Lower Suspension Arm - Graphite
#353116-G

Molded lightweight composite rear lower suspension arm made from specially-formulated graphite composite material.  



Alu Mounting Ball 6.8 - Hard Coated (4)
#353161

CNC-machined 6.8mm dia mounting pivot ball with shoulder,made from premium lightweight 7075 T6 aluminum. Set of 4. 



Alu Pivot Ball 6.8 - Hard Coated (4)
#353171

CNC-machined 6.8mm dia mounting pivot ball,made from premium lightweight 7075 T6 aluminum. Set of 4. 



XB8 Graphite Rear Lower Arm Plate 1.6mm (2)
#353191

Optional graphite rear lower arm plate allows for stiffer the arms and makes the car more stable and easier to drive under high-grip conditions. 



XB8'18 Composite Rear Mud Protector (L+R)
#353193

Lightweight composite mud guard for rear suspension arms protects the rear drivetrain in wet & dirty track conditions. Set of L+R. 



XB8 Graphite Braces for Chassis Side Guards - Set
#353250

Chassis side guard brace CNC-machined from high-grade graphite material.  



Graphite Insert for Short Rear Composite Brace - Set
#353281

Reinforcement braces for rear composite brace, stiffen the composite brace and chassis for high-traction tracks. 



Alu Rear Lower Suspension Holder +2mm - Rear (7mm) - 7075 T6
#353321

With this suspension holder, the roll center is moved by +2mm to allow for super fine roll-center adjustment.  



XB8 Composite Rear Upright LB - Graphite
#353354-G

Lightweight yet ultra-strong rear upright molded from special graphite composite material.  



Alu Shim 4x7.5x1mm (4)
#353380

Alu shims 4x7.5mm size, 1mm thick. Black color, set of 4. 



Alu Shim 4x7.5x2mm (4)
#353381

Alu shims 4x7.5mm size, 2mm thick. Black color, set of 4. 



Rear Anti-Roll Bar 1.8mm
#353418

Rear anti-roll bar for XB8, XT8 & GTX8 cars, 1.8mm thick. 



Rear Anti-Roll Bar 2.0mm
#353420

Rear anti-roll bar for XB8, XT8 & GTX8 cars, 2.0mm thick. 



Rear Anti-Roll Bar 2.2mm
#353422

Rear anti-roll bar 2.2mm thick. 



Rear Anti-Roll Bar 2.4mm
#353424

Rear anti-roll bar 2.4mm thick. 



Rear Anti-Roll Bar 2.5mm
#353425

Rear anti-roll bar for XB8 & XT8, 2.5mm thick. Laser-engraved for easy identification.
 



Rear Anti-Roll Bar 2.6mm
#353426

Rear anti-roll bar 2.6mm thick. 



Rear Anti-Roll Bar 2.8mm
#353428

Rear anti-roll bar 2.8mm thick. 



Rear Anti-Roll Bar 3.2mm
#353432

Rear anti-roll bar 3.2mm thick. 



Alu Rear Wing Shim (2)
#353561

Alu rear wing shim for XB and XT series buggies and truggies. Provides additional support to prevent wing from pulling off from mounting screws. Set of 2. 



Composite Rear Wing Shim - Black (2)
#353565

Molded composite rear wing shim for XB and XT series buggies and truggies. Provides additional support to prevent wing from pulling off of mounting screws. Black colour, set of 2. 



Composite Center Differential Mounting Plate Set - Graphite
#354010-G

Composite center diff mounting plate set made from specially-formulated graphite composite mixture for increased strength and lower weight.  



Center Diff Lower Plates (2)
#354032

Precision-cut shimming plates for raising the center diff mount when using 48T center spur gear (#355048). 

Replaced by GT Composite 2-Speed Holder Plate (2) 



Graphite Ventilated Brake Disk - CNC Machined (2)
#354111

CNC-machined graphite ventilated brake disk.

When using this graphite brake disk, it is necessary to use hardened steel brake pads (#354121) by themselves without Ferodo fibre-style brake pads glued to them. 

Replaced by GT Composite 2-Speed Holder Plate (2) 



LW Ventilated Brake Disk - Laser Cut - Precision-Ground (2)
#354112

Laser-cut, heat-treated, precision-ground ventilated brake disk for XB8 ensures vibration-free operation. Rotating mass is reduced without sacrificing strength or durability. 

Replaced by GT Composite 2-Speed Holder Plate (2) 



Super-Lightweight Ventilated Brake Disk - Precision-Ground (2)
#354113

Laser-cut, heat-treated, precision-ground ventilated super-lightweight brake disk for XB8, GTX and XT8 ensures vibration-free operation. 



Glued Brake Pad Set - Ultra-Efficient (4)
#354131

Factory pre-assembled brake pad set for consistent and precise braking. High-precision, ultra-efficient steel brake pads are CNC-machined and precision ground on both sides for an ultra-smooth surface finish to guarantee maximum braking efficiency. 



Brake Pad SLS (4)
#354132

New ultra-efficient brake pads from special slip-free material. Set of 4. 



GT Graphite Center Mounting Plate 2.5mm
#354252

Center mounting plate made from premium graphite material.  



Differential Case - V2 - Graphite
#355022-G

Rubber-sealed differential case made from new specially-formulated graphite composite material. Lighter, tougher material with higher temperature and wear resistance, also holds the screws better secured in place. 



Front/Rear Differential Large Bevel Gear 44T
#355044

44-tooth large external bevel gear manufactured from HUDY Steel for drive ratio adjustment.  



Front/Rear Differential Large Bevel Gear 45T
#355045

45-tooth large external bevel gear manufactured from HUDY Steel for drive ratio adjustment.  



Extreme Heat Resistant F/R Alu Diff Pin with Inserts (2+4)
#355086

Precision-ground polished alu pin 3.5 x 26.6 mm for internal satellite gears used in large front & rear differentials #355004 and #355005. 



XRAY XB8 Active Diff™ 46T
#355105

Complete Active Differential™ set for XB8.  



Active Differential Spur Gear 46T
#355146

The 46T diff bevel gear for XRAY Active Diff™ is machined from special HUDY steel material which has been specially developed for gear-type products, additionally hardened and precision ground to fit the tightest tolerance requirements for perfect fit with the diff outdrives.  



Active Diff. Outdrive Adapter - Lightweight - HSS™ (2)
#355163

Lightweight CNC-machined diff outdrive adapters for XB8 Active Diff™. 



Alu CVD Drive Axle - Hardcoated (4)
#355212

CNC-machined CVD drive axle made from premium lightweight Swiss 7075 T6 hardcoated aluminum. 



CVD Adjustable Drive Axle - HUDY Spring Steel™ (2)
#355215

Drive axle for XRAY adjustable drive shafts. Drive shaft length adjustment uses 4 different connecting hole positions at the drive axle end to allow changes to overall driveshaft length.  



Alu Wheel Axle Offset “+1mm” - Hard Coated
#355251

Hardcoated aluminum wheel axle with +1mm offset. Using these wheel axles will increase the overall track width by 2mm, making the car more stable and easier to drive.  



Alu Wheel Axle Offset “+2mm” - Hard Coated
#355252

Hardcoated aluminum wheel axles with +2mm offset. Using these wheel axles will increase the overall track width by 4mm, making the car more stable and easier to drive. Set of 2. Wheel axles can be mounted in both front and rear. 



Wheel Nut With Cover - Hard Coated (2)
#355265

Hardcoated aluminum wheel nut with cover for XB8 wheels. Using these wheel nuts, you will never have problems anymore with dirt getting into the wheel axle assembly! Fits front and rear wheel axles.  



Pin with Flat Spot 3x16.8 (2)
#355292

Polished chrome pin with flat spot, 3.0 x 16.8mm. Specially hand-ground for maximum precision. Set of 2. 



Composite Radio Case Set
#356003

All-new radio plate design incorporates a new compact composite radio box. Batteries are now located at the front for better balance. Clean and smooth 1-piece plate design.  



Battery Cable With Switch
#356050

The battery cable with switch connects the receiver battery to the receiver by way of an on/off switch. It is delivered together with switch cover.  



Alu Pivot Ball 13.7 mm With Steel Screw (2)
#357251

To reduce weight and lower the CG, all-new front upper pivot balls are combined with a steel threaded part for maximum strength.  



Brass Adjusting Nut M15x1 (2)
#357253

Optional brass M15 adjusting nut for capturing pivot balls in front steering blocks. The additional weight nuts are more than 3x heavier than standard alu adjusting nut. Great and handy for weight balance adjustment. Set of 2. Fits XB8.  



Composite Ball Cup 13.9mm - Graphite (2)
#357254-G

Molded composite ball cup for cushioning alu M15 alu adjusting nut against 13.9mm pivot ball.  



2-Way Flow Delrin Shock Piston 5-H.(1.5)+2-H.(1.0) (2)
#358027

Set of composite molded shock pistons for two shock absorbers with five 1.5mm holes & two 1.0mm holes.  



2-Way Flow Delrin Shock Piston 6-H.(1.3)+2-H.(1.1) (2)
#358028

Set of composite molded shock pistons for two shock absorbers with six 1.3mm holes & two 1.1mm holes. 



2-Way Flow Delrin Shock Piston 6-H.(1.4)+2-H.(1.1) (2)
#358029

Set of composite molded shock pistons for two shock absorbers with six 1.4mm holes & two 1.1mm holes. 



2-Way Flow Delrin Shock Piston 8-H.(1.2)+2-H.(1.2) (2)
#358030

Set of composite molded shock pistons for two shock absorbers with eight 1.2mm holes & two 1.2mm holes. 



2-Way Flow Delrin Shock Piston 8-H.(1.3)+2-H.(1.2) (2)
#358031

Set of composite molded shock pistons for two shock absorbers with eight 1.3mm holes & two 1.2mm holes.  



XB8 Alu Shock Cap Nut - Black Coated (2)
#358053

CNC-machined 1-piece alu shock cap for XB8, made from premium lightweight 7075 T6 aluminum. Black coated. Set of 2.  



XB8 Alu Shock Cap Nut with Vent Hole - Black Coated (2)
#358054

CNC-machined 1-piece alu shock cap for XB8, made from premium lightweight 7075 T6 aluminum. Features a small vent hole that makes shock assembly very predictable and easy, allowing excess shock oil to easily escape. Machined interior ridges ensure proper placement and sealing of the super-soft silicone membrane.  



Shock Rubber Membrane (4)
#358082

Shock membrane for shock absorbers, made of soft molded rubber. The new shock membranes are now wider to fit the new big-bore shocks.  



Shock Rubber Membrane Ribbed (4)
#358083

Newly designed improved shock membranes provide more consistent feel during long finals with no sign of fade. Shock membrane for shock absorbers, made of soft molded rubber. The new shock membranes are wider to fit the big-bore shocks. The material has been also improved to guarantee the same damping characteristics from the beginning of the race to the end even after excessive loads. Set of 4. 



XB8 Shock Rubber Membrane Bottom Ribbed (4)
#358084

Shock membrane for XB8 shocks, made from soft molded rubber. Features internal bottom ribs to maintain shape. The specially-formulated rubber material of the shock membrane ensures equal damping characteristics from the beginning of the race to the end, even after extreme operation. Set of 4. Fits XB8. 



XB8 Shock Rubber Membrane Bottom Ribbed - Soft (4)
#358084-S

Shock membrane for XB8 shocks, molded from softer transparent rubber. 



XB8 Shock Rubber Valve (4)
#358085

Rubber valve for 2-way flow in shock pistons. Suitable for shocks in XB8, XT8, and GTX. 



XB8 Shock Rubber Membrane Cell - Medium (4)
#358087-M

Shock membrane for XB8 shocks, made from medium molded rubber. The cell shock membranes have less air gap that helps to generate more grip of the car.  



Shock Foam Insert (4)
#358090

Foam inserts for XRAY shocks, go between shock upper mount and rubber membrane. Prevents membrane collapse. Provides slightly more steering, and more stability when landing from big jumps.  



Fuel Tank 123cc with Floating Filter
#358605

Extra-strong fuel tank with integrated floating stone filter ensures that the fuel pickup will always be in the correct orientation even when the car isn’t. 



Alu Monoblock Engine Mount - Swiss 7075 T6
#358709

Alu monoblock engine mount provides solid engine mounting and easy adjustment. Monoblock design is stiffer than standard single engine mounts. 



Composite Air Filter Cover
#358832

Molded composite optional cover for air filter protects the filter and is recommended for muddy and rainy conditions. The cover is a direct fit for the 808 low-profile air filter assembly. 



Air Filter Foam - Low Profil (10)
#358842

Inner + outer low-profile foam filter elements, and a tube of air filter oil. Set of 10. 



Alu Fuel Filter Set
#358900

Large capacity aluminum fuel filter set. This fuel filter is different from others as it is captured in a holder and will not turn as the result of vibration. 



Composite Fuel Filter Set
#358901

Fuel filter set made from tough composite material and the aluminum cap is machined from premium aluminum. A sieve is installed in the fuel filter. The body of the fuel filter has a slot that enables the filter to sit in the holder perfectly and prevents the filter from turning. 



Fuel Filter Mount & Tubing Holders
#358930

Molded composite fuel filter mount and fuel tubing holders.  



Silicone Tubing 1m (2.4 x 5.5mm) Fluorescent Yellow
#358951

Thick silicone fuel tubing. 2.4mm ID, 1m length. Fluorescent yellow colour. 



GT Body with Wing for 1/8 On-Road GT
#359730

XRAY’s self-designed GTX8 body – made from high-quality Lexan™ material – features high-downforce areas: front windscreen for proper airflow, and side downforce areas for higher stability.  



Alu Conical Shim 3x6x2.0mm - Black (10)
#362280-K

Alu conical shim 3x6x2.0mm. Black color. Set of 10. 



Alu Conical Shim 3x6x2.0mm - Orange (10)
#362280-O

Alu conical shim 3x6x2.0mm. Orange color. Set of 10. 



Spring 4.0 Coils 3.6x6x0.5mm, C=3.5 - Gold (2)
#372180

Ultimate-match front coil shock springs for pan car front suspension offer an additional range of choices to fine-tune your car. Powder color-coded for quick & easy identification. Gold color. Set of 2.
 



Connecting Cable Receiver/Batt. Pack
#389135

Connection cable for plugging receiver battery pack into the receiver. Standard Futaba J connector on receiver end, micro battery connector on the battery end. 



Screw Phillips 2x6 (10)
#907206

M2x6 pan-head machine screw, Phillips drive. Set of 10 pieces. 



Ball-Bearing 8x14x4 Rubber Sealed - Grease (2)
#940814

New high-speed ball-bearings manufactured specially for XRAY. ID x OD x thickness (mm) = 8x14x4. Set of 2 pieces. 

Replaced by Ball-Bearing 8x14x4 Rubber Sealed - Grease (2) 



Ball-Bearing 8x16x5 Rubber Sealed - Grease (2)
#940816

New high-speed ball-bearings manufactured specially for XRAY. ID x OD x thickness (mm) = 8x16x5. Set of 2 pieces. 



Ball-Bearing 13x19x4 Rubber Sealed - Grease (2)
#941318

High-speed ball-bearings for XB8’18 and XB8E’18 manufactured specially for XRAY. ID x OD x thickness (mm) = 13x19x4. Set of 2. 



Ball-Bearing 13x19x4 Rubber & Steel Sealed - Grease (2)
#941320

New high-speed ball-bearings manufactured specially for XRAY XB808. Sealed with rubber seal from one side and with steel seal from other side. ID x OD x thickness (mm) = 13x19x4. Set of 2 pieces. 



Washer S 3.2 (10)
#961032

Flat washer, 3.2mm ID. Set of 10 pieces. 



Washer S 6x18x0.3 (10)
#964061

Flat washer. ID x OD x thickness = 6mm x 18mm x 0.3mm. Set of 10. 



Washer S 6x18x0.5 (10)
#964062

Flat washer. ID x OD x thickness = 6mm x 18mm x 0.5mm. Set of 10. 



Washer S 6x10x0.2 (10)
#964063

Flat washer. ID x OD x thickness = 6mm x 10mm x 0.2mm. Set of 10. 



Washer S 6x10x0.3 (10)
#964064

Flat washer. ID x OD x thickness = 6mm x 10mm x 0.3mm. Set of 10. 



Washer S 16x20x0.5 (10)
#964160

Flat washer. ID x OD x thickness = 16mm x 20mm x 0.5mm. Set of 10 pieces. 



ID Product Name Released
350907 XRAY XB8/GTX C-Hub Front Suspension Conversion Set Jan. 23, 2020
352121-S XB8 C-Hub Composite Front Lower Suspens. Arm - Short - Soft Jun. 27, 2019
354252 GT Graphite Center Mounting Plate 2.5mm May 23, 2019
352121-G XB8 C-Hub Composite Front Lower Suspension Arm - Graphite May 07, 2019
352121 XB8 C-Hub Composite Front Lower Suspension Arm - Medium Apr. 26, 2019
353354-G XB8 Composite Rear Upright LB - Graphite Apr. 24, 2019
355086 Extreme Heat Resistant F/R Alu Diff Pin with Inserts (2+4) Mar. 25, 2019
358087-M XB8 Shock Rubber Membrane Cell - Medium (4) Feb. 21, 2019
354113 Super-Lightweight Ventilated Brake Disk - Precision-Ground (2) Jan. 24, 2019
352120-G XB8 Composite Front Lower Suspension Arm - Graphite Jan. 16, 2019
354010-G Composite Center Differential Mounting Plate Set - Graphite Dec. 11, 2018
352121-H XB8 C-Hub Composite Front Lower Suspension Arm - Hard Dec. 06, 2018
352245 XB8 C-Hub Composite Steering Block LB with Alu Inserts Dec. 06, 2018
352277 Composite C-Hub 16° Right Dec. 06, 2018
352287 Composite C-Hub 16° Left Dec. 06, 2018
355215 CVD Adjustable Drive Axle - HUDY Spring Steel™ (2) Dec. 06, 2018
358085 XB8 Shock Rubber Valve (4) Nov. 12, 2018
358709 Alu Monoblock Engine Mount - Swiss 7075 T6 Jul. 17, 2018
358027 2-Way Flow Delrin Shock Piston 5-H.(1.5)+2-H.(1.0) (2) Jul. 12, 2018
358028 2-Way Flow Delrin Shock Piston 6-H.(1.3)+2-H.(1.1) (2) Jul. 12, 2018