xrayxrayHome XRAY homeXRAY X-shopXRAY X-forumRCAmerica
supportsearchcontactguestbooksite map
newsproductsaboutusworldwide headlines
click to enable quick search
 
Alu Countersunk Shim (4)
#301159

Machined alu countersunk shims for use on XRAY Quick Saver™. Set of 4. 



Set of Alu Shim (0.5mm, 1.5mm, 2.5mm)
#303120

Ultimate assortment of set-up shims. You can use the shims for easy and accurate adjustment of:
• front and rear roll center
• front bump steer
• front and rear toe-in
• wheelbase  



Set of Alu Shim (1.0mm, 2.0mm, 3.0mm)
#303121

Ultimate assortment of set-up shims. You can use the shims for easy and accurate adjustment of:
• front and rear roll center
• front bump steer
• front and rear toe-in
• wheelbase  



Alu Shim 3x6x0.5mm - Black (10)
#303121-K

Alu shims 3x6mm size, 0.5mm thick. Black color. Set of 10. 



Alu Shim 3x6x0.5mm - Orange (10)
#303121-O

Alu shims 3x6mm size, 0.5mm thick. Orange color. Set of 10. 



T2 Alu Shim 3x6x1.0mm (10)
#303122

Alu shims 3x6mm size, 1mm thick. Silver color, set of 10. 



Alu Shim 3x6x1.0mm - Black (10)
#303122-K

Alu shims 3x6mm size, 1mm thick. Black color, set of 10. 



T2 Alu Shim 3x6x2.0mm (10)
#303123

Alu shims 3x6mm size, 2mm thick. Silver color, set of 10. 



Alu Shim 3x6x2.0mm - Black (10)
#303123-K

Alu shims 3x6mm size, 2mm thick. Black color, set of 10. 



Alu Shim 3x6x3.0mm (10)
#303125

Alu shims 3x6mm size, 3mm thick. Set of 10. 



Alu Shim 3x6x3.0mm - Black (10)
#303125-K

Alu shims 3x6mm size, 3mm thick. Black color. Set of 10. 



Alu Shim 3x6x3.0mm - Orange (10)
#303125-O

Alu shims 3x6mm size, 3mm thick. Orange color. Set of 10. 



Alu Shim 3x6x5.0mm - Black (10)
#303126-K

Alu shims 3x6mm size, 5mm thick. Black color, set of 10. 



Alu Shock Spring Retaining Collar (4)
#308031

Aluminum CNC-machined shock collars that can be used on the XRAY shock absorbers to increase the durability. Stylish and lightweight collars are CNC-machined from premium Swiss 7075 T6 aluminum and are strategically lightened. 



Alu XRAY Shock Spring Retaining Collar - Black (4)
#308031-K

Aluminum shock collars for use on XRAY shock absorbers to increase durability.  



Alu XRAY Shock Spring Retaining Collar - Orange (4)
#308031-O

Aluminum CNC-machined shock collars that can be used on the XRAY shock absorbers to increase the durability. Stylish and lightweight collars are CNC-machined from premium Swiss 7075 T6 aluminum and are strategically lightened. Set of four. Orange color. 



Shock Adj. Nut Alu + O-ring
#308040

Set of four alu. spring-tension adjusting nuts and four O-rings to be inserted in them. O-rings prevent adjusting nuts from coming loose. 



Alu Cap For XRAY Shock Body #308322
#308327

CNC-machined aluminum shock lower cap for #308322 shock body. Set of two. 

Replaced by Alu Cap For XRAY Shock Body #308322 - Orange 



Composite Shock Parts - Rebound Hole - Short
#308332

One frame containing composite parts (except pistons) for two XRAY short shock absorbers. These new shock parts feature the upper shock cap with a hole which allows for faster, easier and more comfortable shocks rebound adjustment. Fits all XRAY electric and nitro touring shocks. 



T4 Composite Shock Parts
#308333

One frame containing composite parts (except pistons) for two T4 SLP aluminum shock absorbers. 



Alu Shock Cap-Nut with Vent Hole (2)
#308352

Machined alu upper shock cap for XRAY Shock Absorber-Set 4-Step. Set of 2.

The upper aluminum cap features a small vent hole that makes shock assembly very predictable and easy, since excess shock oil will escape through this vent hole.  



Precision Balancing Chassis Weights (4 pcs.)
#309840

A complete set of 4 chassis balancing weights (2x 5g + 2x 10g) and mounting hardware. Designed for XRAY electric & nitro touring car to be mounted at pre-drilled chassis holes; also fits other race cars as well. Made from steel and laser engraved with the weight value for easy identification. 



Composite Chassis Weight Holder
#331280

Molded composite holder for integrated chassis weights or chassis inserts. Set of 6. 



Alu Anti-Roll Bar Collar o2.2 (2)
#333443

Alu anti-roll bar collars remove play from the front and rear anti-roll bar wires.  



Alu Brake Post Arm - Swiss 7075 T6
#334061

Aluminum brake post arm allows more direct and precise braking. Ultra-strong construction provides very long life and durability. CNC-machined from premium Swiss 7075 T6 aluminum.  

Replaced by Alu Brake Post Arm - Swiss 7075 T6 - Orange 



Alu Brake Post Arm - Swiss 7075 T6 - Orange
#334061-O

CNC-machined from premium Swiss 7075 T6 aluminum, this new brake post arm allows more direct and precise braking.  



Composite 2-Speed Gear 53T (2nd) - V3
#335553

XRAY precision molded 53T spur gear (2nd gear) made from special composite material which gives the spur gear an optimum balance of hardness, toughness, and flexibility thus providing long life, minimal wear, and minimizing breakage or teeth stripping. The spur gear remain strategically lightened to reduce rotating mass. The special composite material will withstand even the most extreme racing conditions which imparts high tension on the spur gears. 



Composite 2-Speed Gear 54T (2nd) - V3
#335554

XRAY precision molded 54T spur gear (2nd gear) made from special composite material which gives the spur gear an optimum balance of hardness, toughness, and flexibility thus providing long life, minimal wear, and minimizing breakage or teeth stripping. The spur gear remain strategically lightened to reduce rotating mass. The special composite material will withstand even the most extreme racing conditions which imparts high tension on the spur gears. 



Composite 2-Speed Gear 55T (2nd) - V3
#335555

XRAY precision molded 55T spur gear (2nd gear) made from special composite material which gives the spur gear an optimum balance of hardness, toughness, and flexibility thus providing long life, minimal wear, and minimizing breakage or teeth stripping. The spur gear remain strategically lightened to reduce rotating mass. The special composite material will withstand even the most extreme racing conditions which imparts high tension on the spur gears. 



Composite 2-Speed Gear 57T (1st)
#335557

XRAY precision molded 57 spur gear (1st gear) made from special composite material which gives the spur gear an optimum balance of hardness, toughness, and flexibility thus providing long life, minimal wear, and minimizing breakage or teeth stripping. The spur gear remain strategically lightened to reduce rotating mass. The special composite material will withstand even the most extreme racing conditions which imparts high tension on the spur gears. 



Composite 2-Speed Gear 58T (1st)
#335558

XRAY precision molded 58 spur gear (1st gear) made from special composite material which gives the spur gear an optimum balance of hardness, toughness, and flexibility thus providing long life, minimal wear, and minimizing breakage or teeth stripping. The spur gear remain strategically lightened to reduce rotating mass. The special composite material will withstand even the most extreme racing conditions which imparts high tension on the spur gears. 



Composite 2-Speed Gear 59T (1st)
#335559

XRAY precision molded 59 spur gear (1st gear) made from special composite material which gives the spur gear an optimum balance of hardness, toughness, and flexibility thus providing long life, minimal wear, and minimizing breakage or teeth stripping. The spur gear remain strategically lightened to reduce rotating mass. The special composite material will withstand even the most extreme racing conditions which imparts high tension on the spur gears. 



Composite 2-Speed Gear 60T (1st)
#335560

XRAY precision molded 60 spur gear (1st gear) made from special composite material which gives the spur gear an optimum balance of hardness, toughness, and flexibility thus providing long life, minimal wear, and minimizing breakage or teeth stripping. The spur gear remain strategically lightened to reduce rotating mass. The special composite material will withstand even the most extreme racing conditions which imparts high tension on the spur gears. 



Spring C=7.8 For Gear Box - Medium - Silver
#335581

Medium springs for #335540 Composite 2-Speed Gear Box Set allows for medium 2nd gear engagement point. Set of 2. 



Graphite 2-Speed Gear 53T (2nd)
#335653

XRAY precision-molded spur gear (2nd gear). 



Graphite 2-Speed Gear 54T (2nd)
#335654

XRAY precision-molded spur gear (2nd gear). 



Graphite 2-Speed Gear 57T (1st)
#335657

XRAY precision-molded spur gear (1st gear). 



Graphite 2-Speed Gear 58T (1st)
#335658

XRAY precision-molded spur gear (1st gear). 



Graphite 2-Speed Gear 60T (1st)
#335660

XRAY precision-molded spur gear (1st gear). 



Rubber Receiver Case Cover
#336030

Molded rubber receiver case crystal cover. 



Graphite Receiver Bracket Set
#336040

Smart, stylish and functional, this optional receiver bracket is a direct replacement for the molded composite receiver case. The bracket is CNC-machined from premium-quality woven graphite material, and a composite antenna tube mount and all necessary mounting hardware complete the set. 



Receiver Switch - Set
#336060

Complete receiver switch set for NT1 fits directly into composite receiver case. Pre wired mechanical on/off switch for quick & easy powering/shutdown of onboard electronics. Molded rubber cover protects switch from contamination by fuel and dirt. Comes with Futaba J connectors. 



Graphite Personal Transponder Bracket
#336080

Smart and functional personal transponder mounting plate made from premium-quality graphite material. Includes mounting hardware for easy attachment to NT1 radio plate. 



Graphite Battery Plate
#336155

Optional CNC-machined plate made from premium-quality woven graphite material. Smart design and strong material increases chassis longitudinal stiffness, complementing the Multi-Flex Technology™ engine mount. 



Alu Pivot Ball 8.4mm - Swiss 7075 T6 - Hard Coated (4)
#337251

CNC-machined 8.4mm dia. mounting pivot ball, made from premium lightweight
7075 T6 aluminum. Set of 4.

A single alu pivot ball is 63% lighter than the steel counterpart; total combined weight saving of 18.8 grams on a car.
 



Alu Adjusting Nut M10x1 (4)
#337252

Alu M10 adjusting nut for capturing pivot balls in front steering blocks and rear uprights. Set of 4. 



Composite Ball Cup 8.4mm (8)
#337254

Molded composite ball cups for cushioning alu M10 alu adjusting nuts against 8.4mm pivot balls. Set of 8. 



Titan Pivot Ball 8.4mm (4)
#337255

Titanium 8.4mm pivot balls, ultra-precision hand ground for high durability and long life. Set of 4. 



Clutch Spring
#338580

Clutch spring for XCA clutch. 



Clutch Spring - Medium - V2
#338581

Medium clutch spring for XCA clutch allows for later clutch engagement at medium RPM. Beneficial on open, high-speed tracks with high traction. 



XRAY RX8E Conversion Set
#340902

Complete conversion set to convert RX8 to electric-powered on-road car. 



Brass Chassis Weight Front 25g
#341187

Precision-machined brass chassis balancing weight.  



Brass Chassis Weight Middle
#341188

Precision-machined brass chassis balancing weight. 



Brass Chassis Weight Rear 25g
#341189

Precision-machined brass chassis balancing weight.  



Graphite Rear Body Centering Plate - Set
#341381

Graphite rear body centering plate set. Tough, strong, and lightweight rear centering plate for RX8 made from thick, CNC-machined, top-grade graphite. 



Composite Susp. Arm For Wire Anti-Roll Bar - Front Lower - G
#342115

Optional front lower suspension arm made from special graphite composite material has been updated and modified to accommodate the new front wire anti-roll bar.  



Composite Suspension Arm Front Upper - Short
#342131

Front upper suspension arm made from tough molded composite material, works on either left or right side. The arm was shortened to allow for narrower front track-width for more steering. 



Composite Suspension Arm Front Upper - Short - Hard
#342132

Front upper suspension arm made from new hard composite material, used on either left or right side.  



Composite Suspension Arm Front Upper - Short - Graphite
#342133

Optional front upper suspension arm made from special graphite composite material, works on either left or right side. 



Composite Steering Block +1° King-Pin Right
#342211

Molded-composite right steering block for XRAY RX8 with built-in +1° kingpin angle. Marked "R" and "+" for easy identification. Use with matching #342221 left steering block. 



Composite Steering Block -1° King-Pin Right
#342212

Molded-composite right steering block for XRAY RX8 with built-in -1° kingpin. Marked "R" and "–" for easy identification. Use with matching #342222 left steering block. 



Extra Eccentric Steering Block for Aero Disc - Right
#342215

Re-designed molded composite RIGHT steering block with 2 extra eccentric positions, making a total of 6 different roll center positions. Additional holes allow the mounting of graphite aerodynamic disks.  



Composite Steering Block +1° King-Pin Left
#342221

Molded-composite left steering block for XRAY RX8 with built-in +1° kingpin angle. Marked "L" and "+" for easy identification. Use with matching #342211 right steering block. 



Composite Steering Block -1° King-Pin Left
#342222

Molded-composite left steering block for XRAY RX8 with built-in –1° kingpin angle. Marked "L" and "–" for easy identification. Use with matching #342212 right steering block. 



Exra Eccentric Steering Block for Aero Disc - Left
#342225

Re-designed molded composite LEFT steering block with 2 extra eccentric positions, making a total of 6 different roll center positions. Additional holes allow the mounting of graphite aerodynamic disks.  



Downstop Independent Alu Front Anti-Roll Bar - Orange
#342401-O

Aluminum front anti-roll bar for the XRAY RX8 allows you to adjust the anti-roll bar independently from downstop, so that the downstop setting does not influence the performance of the anti-roll bar and vice versa. Orange color. 



Anti-Roll Bar Front 2.0 mm
#342480

Front wire anti-roll bar redesigned to work with the adjustable system which allows more comfortable adjustment of the bar as well as remove excessive play.  



Anti-Roll Bar Front 2.2 mm
#342482

Front wire anti-roll bar redesigned to work with the adjustable system which allows more comfortable adjustment of the bar as well as remove excessive play.  



Anti-Roll Bar Front 2.4 mm
#342484

Front wire anti-roll bar redesigned to work with the adjustable system which allows more comfortable adjustment of the bar as well as remove excessive play.  



Anti-Roll Bar Front 2.8 mm
#342488

Front wire anti-roll bar redesigned to work with the adjustable system which allows more comfortable adjustment of the bar as well as remove excessive play.  



Alu Adjustable Servo Saver - Swiss 7075 T6 - Orange
#342511-O

Alu servo saver arms CNC-machined from premium Swiss 7075 T6 aluminum. Allows for quick & easy adjustment of steering Ackermann at the central servo saver. 4 settings available. Ultra-strong construction for increased lifespan and durability. Orange color. 



RX8E Graphite Belt Tensioner Holder
#343076

Belt tensioner holder made from premium graphite material. 



Suspension Arm for Extension - Rear Lower - Hard
#343112

Rear lower suspension arm made from new hard composite material, used on either left or right side.  



Composite Suspension Arm for Extension - Rear Lower - Graphite
#343113

Rear lower suspension arm made from special composite material, can be used on either left or right side.  



Composite Suspension Arm Rear Upper - Hard
#343131

Rear upper suspension arm made from new hard composite material. 



Composite Suspension Arm Rear Upper - Graphite
#343132

Optional rear upper suspension arm made from special graphite composite material, works on either left or right side.  



Anti-Roll Bar Rear 2.6 mm
#343466

Rear anti-roll bar manufactured from special spring steel material, black color.  



Anti-Roll Bar Rear 3.0 mm
#343470

Rear anti-roll bar manufactured from special spring steel material, black color.  



Alu Cutted Anti-Roll Bar Collar o2.3 - Black (2)
#343483-K

Alu anti-roll bar collars remove play from the front and rear anti-roll bar wires.  



Alu Electric Motor Mount - Swiss 7075 T6
#344030

CNC-machined alu motor plate for electric motor made from premium lightweight Swiss 7075 T6 aluminum. 



Ventilated Brake Disc - Precision-Ground - Lightweight
#344111

Lightweight, heat-treated and precision-ground ventilated brake disc for RX8.  



Glued Brake Pad Set – Ultra-Efficient
#344130

Factory pre-assembled brake pad set for consistent and precise braking. High-precision, ultra-efficient steel brake pads are CNC-machined and precision ground on both sides for an ultra-smooth surface finish to guarantee maximum braking efficiency.  



Front Axle Outdrive Adapter - Lightweight (2)
#345071

For serious racers who are conscious of weight savings, XRAY offers lightweight CNC-machined diff outdrive adapters made from tough HUDY Spring Steel™.  



Alu Front CVD Drive Axle - Swiss 7075 T6 - Hard Coated
#345212

CNC-machined CVD drive axles for RX8 made from premium lightweight Swiss 7075 T6 hardcoated aluminum. Strategically-machined, super-lightweight drive axle are specially designed and produced for high-competition racing.  



Graphite Front Aerodynamic Disc 2.2mm - Left + Right - Set
#345270

CNC-machined high-strength graphite aerodynamic disks improve low & high-speed steering, improve traction, and improve stability in high-speed corners. 



Alu Shim 12x15x1.0mm (4)
#345290

Alu shims. ID x OD x thickness = 12 x 15 x 1.0mm. Set of 4. 



Rear CVD Drive Shaft Set - HUDY Spring Steel™
#345301

CNC-machined rear CVD drive shaft set for RX8 made from world-renown HUDY Spring Steel™. Hand ground for maximum precision, then individually measured and inspected. 



Rear Drive Axle - HUDY Spring Steel™
#345311

Rear drive axle for RX8 CNC-machined from world-renowned, top-secret HUDY Spring Steel™.  



Alu Rear CVD Drive Axle - Swiss 7075 T6 - Hard Coated
#345312

CNC-machined CVD drive axle for RX8 made from premium lightweight Swiss 7075 T6 hardcoated aluminum. Strategically-machined, super-lightweight drive axles are specially designed and produced for high-competition racing.  



Rear CVD Drive Shaft 61mm - HUDY Spring Steel™
#345321

CNC-machined CVD rear drive shaft made from world-renown HUDY Spring Steel™. Hand ground for maximum precision, then individually measured and inspected. 



Graphite Rear Aerodynamic Disc 2.2mm - Left + Right - Set
#345370

CNC-machined high-strength graphite aerodynamic disks improve low & high-speed steering, improve traction, and improve stability in high-speed corners. 



High-Performance Drive Belt Front 6.0x204mm
#345431

High-performance front drive belt 6.0 x 204mm. 

Replaced by Low Friction Drive Belt Front 6.0x204mm 



Low Friction Drive Belt Front 6.0x204mm
#345432

Optional specially-modified high-performance front drive belt.  



High-Performance Drive Belt Side 6.0x432mm
#345441

High-performance side drive belt 6.0 x 432mm. 



High-Performance Drive Belt Rear 8.0x204mm
#345451

High-performance rear drive belt 8.0 x 204mm. 

Replaced by Low Friction Drive Belt Rear 8.0x204mm 



Low Friction Drive Belt Rear 8.0x204mm
#345452

Optional specially-modified high-performance rear drive belt. 



Alu Carrier for 2-Speed Gear (2nd) - Swiss 7075 T6 - Orange
#345520-O

2nd gear carrier (drum) CNC-machined from tough Swiss 7075 T6 alu. Orange color. 



Alu Carrier for 2-Speed Gear (2nd) - Small - Swiss 7075 T6
#345521

2nd gear carrier drum CNC-machined from tough Swiss 7075 T6 alu. Designed to be used with new small 2 speed. 



Alu 2-Speed Shaft Locating Collar - Lightweight
#345591

Strategically-lightened alu locating collar made from tough 7076 T6 alu replaces the composite collar used on the 2-speed shaft. Rotating mass is reduced without sacrificing strength or durability. 

Replaced by Alu 2-Speed Shaft Locating Collar - Lightweight - Orange 



Alu 2-Speed Shaft Locating Collar - Lightweight - Orange
#345591-O

Strategically-lightened alu locating collar made from tough 7076 T6 aluminum replaces the composite collar used on the 2-speed shaft. Rotating mass is reduced without sacrificing strength or durability. Orange color. 



Alu 2-Speed Shaft Shim (2)
#345592

Alu shims, 8x10mm and 1.5mm thick, for smaller 2-speed. Set of 10. 



RX8E Center Shaft - HUDY Spring Steel™
#345610

Precision-ground, heat-treated & polished center shaft gives smooth operation, extra strength, and long life. 



RX8E Alu Spur Gear Collar - Swiss 7075 T6
#345620

CNC-machined spur gear collar made from high-quality Swiss 7075 T6 aluminum. 



RX8E Alu Pinion Gear Adapter - Swiss 7075 T6
#345630

Pinion gear adapter CNC-machined from high-quality Swiss 7075 T6 aluminum. 



Alu Shim 5x16.8x1.5mm Black - Swiss 7075 T6 (2)
#345690

Alu shims 5x16.8mm size, 1.5mm thick CNC-machined from high-quality Swiss 7075 T6 aluminum. Black color, set of 2. 



Composite Belt Pulley Cover Set - Graphite
#345800-O

Set of molded composite pulley covers and collars made from specially-formulated graphite composite mixture for increased strength and lower weight.  



Low Friction Composite Belt Pulley - Set - Graphite
#345801-O

Complete set of precision-molded, low-friction composite belt pulleys + covers and collars made of specially-formulated graphite composite material that is a perfect balance of reliability and performance.  



Low Friction C. 2-Speed Belt Pulley 20T - Center - Graphite
#345820-O

Precision-molded, low-friction composite 20T belt pulley on main layshaft, drives rear belt. 



Low Friction Comp. Side Belt Pulley 18T o8 - Rear - Graphite
#345838-O

Precision-molded, low-friction composite 18T side belt pulley on 2-speed shaft, drives side belt (at rear).  



Low Friction C. Front Belt Pulley 18T o6 - Center - Graphite
#345858-O

Precision-molded, low-friction composite 18T front belt pulley on inside of middle shaft, drives front belt.  



Low Friction Comp. Side Belt Pulley 28T - Front - Graphite
#345888-O

Precision-molded, low-friction composite 28T side belt pulley on outside of middle shaft, driven by side belt.  



Low Friction Comp. Side Belt Pulley 29T - Front - Graphite
#345889-O

Precision-molded, low-friction composite 29T side belt pulley on outside of middle shaft, driven by side belt.  



Alu 2-Speed Belt Pulley 20T - Center - Set
#345920

Alu 20T belt pulley on main layshaft drives rear belt. CNC-machined from premium lightweight Swiss 7075 T6 aluminum, hardcoated for extra durability and long lifespan and has been strategically lightened. 

Product was discontinued! 



Alu Side Belt Pulley 18T o8 - Rear - Set
#345938

Alu 18T side belt pulley on main layshaft drives side belt. CNC-machined from premium lightweight Swiss 7075 T6 aluminum, hardcoated for extra durability and long lifespan and has been strategically lightened.  

Product was discontinued! 



Alu Front Belt Pulley 18T o6 - Center - Set
#345958

Alu 18T front belt pulley on middle shaft, drives front belt. CNC-machined from premium lightweight Swiss 7075 T6 aluminum, hardcoated for extra durability and long life and has been strategically lightened. 



Alu Side Belt Pulley 28T - Front - Set
#345988

Alu 28T side belt pulley. CNC-machined from premium lightweight Swiss 7075 T6 aluminum, hardcoated for extra durability and long life and has been strategically lightened. 



Alu Side Belt Pulley 29T - Front - Set
#345989

Alu 29T side belt pulley. CNC-machined from premium lightweight Swiss 7075 T6 aluminum, hardcoated for extra durability and long life and has been strategically lightened.  



Alu Side Belt Pulley 30T - Front - Set
#345990

Alu 30T side belt pulley. CNC-machined from premium lightweight Swiss 7075 T6 aluminum, strategically lightened, and hardcoated for extra durability and long life.  



RX8E Graphite Radio Plate
#346130

RX8E radio plate, CNC-machined from 2.5mm premium graphite material. Designed for two short batteries.
 



RX8E Graphite Receiver Case Holder
#346131

CNC-machined receiver case holder made from premium graphite material. 



RX8E Graphite Fan Holder
#346132

CNC-machined fan holder for 40mm fan made from premium graphite material. The fan holder can be easily secured to the electric motor mount 344030. 



Brass Battery Plate for Lipo Batteries - 100g
#346157

Exclusive LiPo tray designed to accommodate lower weight LiPo receiver battery packs (lighter than standard NiMH receiver battery packs).  



Alu Rear Body Holder Arm Pin - Hard Coated (2)
#347331

Alu hardcoated rear body holder arm pins are CNC-machined from premium lightweight Swiss 7075 T6 aluminum and has been strategically lightened by 63% compared to the standard #347330 arm pin. Hardcoated for extra durability and long life.  



Spring-Set C=7.5 - Front (2)
#348185

Ultimate-match front shock springs for XRAY shocks. Stylish black finish. Laser-engraved value on top spring coil for easy identification. Set of 2. 



Spring-Set C=8.0 - Front (2)
#348186

Ultimate-match front shock springs for XRAY shocks. Stylish black finish. Laser-engraved value on top spring coil for easy identification. Set of 2. 



Spring-Set C=8.5 - Front (2)
#348187

Ultimate-match shock springs (C=8.5) for XRAY shocks. Stylish black finish. Laser-engraved value (8.5) on top spring coil for easy identification. Set of 2. 



Spring-Set Progressive C=7-9 - Front (2)
#348188

Ultimate-match front shock springs for XRAY shocks. Stylish black finish. Laser-engraved value on top spring coil for easy identification. Set of 2. 



Spring-Set C=10.0 - Front (2)
#348189

Ultimate-match front shock springs for XRAY shocks. Stylish black finish. Laser-engraved value on top spring coil for easy identification. Set of 2. 



Spring-Set C=5.0 - Rear (2)
#348283

Ultimate-match rear shock springs for XRAY shocks. Stylish black finish. Laser-engraved value on top spring coil for easy identification. Set of 2. 



Spring-Set C=6.3 - Front (2)
#348285

Ultimate-match shock springs (C=6.3) for XRAY shocks. Stylish black finish. Laser-engraved value (6.3) on top spring coil for easy identification. Set of 2. 



XCA Alu Pinion Gear 17T (1st) - 7075 T6 - Hard Coated -Large
#348417

High-strength 17T pinion 1st gear made from tough 7075 T6 alu, large and specially hardcoated for superior strength, high durability and long life. 



XCA Alu Pinion Gear 19T (1st) - 7075 T6 - Hard Coated -Large
#348419

High-strength 19T pinion 1st gear made from tough 7075 T6 alu, large and specially hardcoated for superior strength, high durability and long life. 



XCA Alu Pinion Gear 22T (2nd) - 7075 T6 - Hard Coated -Large
#348422

High-strength 22T pinion 2nd gear made from tough 7075 T6 alu, large and specially hardcoated for superior strength, high durability and long life. 



XCA Alu Pinion Gear 24T (2nd) - 7075 T6 - Hard Coated -Large
#348424

High-strength 24T pinion 2nd gear made from tough 7075 T6 alu, large and specially hardcoated for superior strength, high durability and long life. 



XCA Alu Pinion Gear 25T (2nd) - 7075 T6 - Hard Coated -Large
#348425

High-strength 25T pinion 2nd gear made from tough 7075 T6 alu, large and specially hardcoated for superior strength, high durability and long life. 



Alu Nickel Coated Clutch Bell
#348513

Lightweight XCA alu clutchbell made from CNC-machined premium Swiss 7075 T6 aluminum, nickel coated. 



Alu Flywheel - Flat - Swiss 7075 T6 - Hard Coated
#348532

Lightweight flat XCA flywheel made from tough 7075 T6 hardcoated alu has been strategically lightened, reducing rotating weight without sacrificing strength or durability. 



RX8 Conical Clutch Washer Spring Set
#348540

New conical clutch washer springs offer more consistent clutch operation for maximum punch.  



Clutch Shoe - Red
#348576

CNC-machined red clutch shoe for XCA clutch. Material in this clutch shoe is hard and provides less slippage and wear rate. Recommended for medium- and high-traction tracks. 



Alu RX8 Pinion Gear Tool
#349903

XCA-clutch pinion gear tool aids in installing & removing XCA clutchbell pinion gears. 



Silicone Tubing 1m (2.4 x 5.5mm) Fluorescent Yellow
#358951

Thick silicone fuel tubing. 2.4mm ID, 1m length. Fluorescent yellow colour. 



XRAY RX8 Sticker for Body - White
#397360

Set of black & white transparent XRAY RX8 stickers fits any 1/8th scale body, looks great on your tool or pit boxes as well. 



Ceramic Axial Thrustbearing F5-10 5x10x4
#930250

High-precision axial thrustbearing 5x10x4mm for XCA clutch features ceramic balls. Highest-quality material and design guarantees the smoothest clutch operation and increased life. Ceramic balls in the axial cage are made from extra-hard Si3N4 silicone nitride ceramic. Significantly improves lifespan while reducing friction and vibration. Higher RPM capabilities. 



Alu Nut M3 (10)
#960031

M3 alu locking nuts. Set of 10. 



Titan Pin 3x20 (2)
#980320-T

Titanium pins, ultra-precision hand ground for high durability and long life. More than 40% lighter compared to standard steel pins.  



Titan Pin 3x22 (2)
#980322-T

Titanium pins, ultra-precision hand ground for high durability and long life. More than 40% lighter compared to standard steel pins.  



ID Product Name Released
342480 Anti-Roll Bar Front 2.0 mm May 17, 2019
342482 Anti-Roll Bar Front 2.2 mm May 17, 2019
342484 Anti-Roll Bar Front 2.4 mm May 17, 2019
342488 Anti-Roll Bar Front 2.8 mm May 17, 2019
343466 Anti-Roll Bar Rear 2.6 mm May 17, 2019
343470 Anti-Roll Bar Rear 3.0 mm May 17, 2019
333443 Alu Anti-Roll Bar Collar o2.2 (2) Mar. 18, 2019
343483-K Alu Cutted Anti-Roll Bar Collar o2.3 - Black (2) Mar. 18, 2019
303125-O Alu Shim 3x6x3.0mm - Orange (10) Sep. 10, 2018
343076 RX8E Graphite Belt Tensioner Holder Jul. 12, 2018
344030 Alu Electric Motor Mount - Swiss 7075 T6 Jul. 12, 2018
345610 RX8E Center Shaft - HUDY Spring Steel™ Jul. 12, 2018
345620 RX8E Alu Spur Gear Collar - Swiss 7075 T6 Jul. 12, 2018
345630 RX8E Alu Pinion Gear Adapter - Swiss 7075 T6 Jul. 12, 2018
345690 Alu Shim 5x16.8x1.5mm Black - Swiss 7075 T6 (2) Jul. 12, 2018
346130 RX8E Graphite Radio Plate Jul. 12, 2018
346131 RX8E Graphite Receiver Case Holder Jul. 12, 2018
346132 RX8E Graphite Fan Holder Jul. 12, 2018
980322-T Titan Pin 3x22 (2) Jun. 20, 2018
980320-T Titan Pin 3x20 (2) Jun. 05, 2018
  

 
  T4 Is Double ETS Champion    
  XT8E Wins At 1/8 Off-Road ROAR E-Nats In US    
  GTX8 Is European Vice-Champion    
  XT8 Is US National Champion    
  XB4 & XT2 Are EOS 2016/2017 Champions    
  XB8E'17 Wins At The NEO Race    
  X12 Is Double European Champion    
  X12 Wins At 2017 ROAR Nationals    
  T4 Wins At 2017 TITC    
  XRAY T4 Double Win At Snowbird Nationals 2017    
  The largest and most powerful set-up sheet database in the world..    
 
     
  All artwork & webdesign by XRAY. All content © 1999 - 2009 by XRAY Terms of usePrivacy & security