xrayxrayHome XRAY homeXRAY X-shopXRAY X-forumRCAmerica
supportsearchcontactguestbooksite map
newsproductsaboutusworldwide headlines
click to enable quick search
 
Alu Shim 3x6x1.0mm (10)
#303122

Alu shims 3x6mm size, 1mm thick. Silver color, set of 10. 



Alu Shim 3x6x1.0mm - Black (10)
#303122-K

Alu shims 3x6mm size, 1mm thick. Black color, set of 10. 



Alu Shim 3x6x1.0mm - Orange (10)
#303122-O

Alu shims 3x6mm size, 1mm thick. Orange color, set of 10. 



Alu Shim 3x6x2.0mm - Black (10)
#303123-K

Alu shims 3x6mm size, 2mm thick. Black color, set of 10. 



Alu Shim 3x6x2.0mm - Orange (10)
#303123-O

Alu shims 3x6mm size, 2mm thick. Orange color, set of 10. 



Alu Shim 3x6x3.0mm (10)
#303125

Alu shims 3x6mm size, 3mm thick. Set of 10. 



Alu Shim 3x6x3.0mm - Black (10)
#303125-K

Alu shims 3x6mm size, 3mm thick. Black color. Set of 10. 



Alu Shim 3x6x3.0mm - Orange (10)
#303125-O

Alu shims 3x6mm size, 3mm thick. Orange color. Set of 10. 



Alu Shim 3x6x5.0mm - Black (10)
#303126-K

Alu shims 3x6mm size, 5mm thick. Black color, set of 10. 



Alu Shim 3x6x4.0mm - Black (10)
#303127-K

Alu shims 3x6mm size, 4mm thick. Black color, set of 10. 



Alu Shim 3x6x6.0mm - Black (10)
#303128-K

Alu shims 3x6mm size, 6mm thick. Black color, set of 10. 



Alu Anti-Roll Bar Pivot ball 5.8mm - Hard Coated (2)
#333451

CNC-machined 5.8mm dia ball joint for anti-roll bar, made from premium lightweight 7075 T6 aluminum. Set of 2. 



Spring C=7.8 For Gear Box - Medium - Silver
#335581

Medium springs for #335540 Composite 2-Speed Gear Box Set allows for medium 2nd gear engagement point. Set of 2. 



Composite Receiver Case - V2
#336000

Molded composite receiver case (top & bottom) and switch cover. Case top includes integrated antenna holder. 



Receiver Battery Pack Intellect 1400mAh NiMH - 6.0V
#339111

XRAY introduces a new 5-cell (6.0V) inline battery pack made from ultra-high performance Intellect IB1400mAh NiMH cells. These 2/3A cells offer low resistance and will maintain their high voltage under load, allowing them to easily provide power to high-powered servos without a performance decrease.  



XRAY XT8E Conversion Set
#350905

Complete conversion set to convert XT8 to electric-powered truggy. 



XRAY Alu Front Suspension Conversion Set
#350906

Complete XT8 front suspension upgrade set includes: alu steering blocks, alu caster blocks, and alu steering plates.  



Composite Chassis Side Guard L+R - Soft
#351159-S

The composite side guards protect the car, muffler, and fuel tank from side impacts. The side guards perfectly fit the chassis and seal against dirt. Molded from SOFT composite mixture for increased flex to generate more traction.
 



Graphite Body Protector (F+R)
#351311

CNC-machined front and rear upper body protectors made from premium-grade graphite material, specially designed to protect the body over damage. 



Mounting Ball 6.8mm (2)
#352160

Mounting steel pivot ball 6.8mm dia. Set of 2. 



Steel Eccentric Bushing 1° (2)
#352171

Eccentric bushing for I.A.C. (Integrated Adjustable Caster). 1° setting (identified by 1 dot) allows for either +1° or -1° caster adjustment depending on the orientation of the bushing. Made from famous Hudy Spring Steel™. Set of 2. 

Replaced by Steel Eccentric Bushing 1 - V2 (2) 



Steel Eccentric Bushing 2° (2)
#352172

Eccentric bushing for I.A.C. (Integrated Adjustable Caster). 2° setting (identified by 2 dots) allows for either +2° or -2° caster adjustment depending on the orientation of the bushing. Made from Hudy Spring Steel™. Set of 2. 

Replaced by Steel Eccentric Bushing 2 - V2 (2) 



Steel Eccentric Bushing 1 - V2 (2)
#352174

Eccentric bushing for I.A.C. (Integrated Adjustable Caster). 1 setting (identified by 1 dot) allows for either +1 or -1 caster adjustment depending on the orientation of the bushing. 



Steel Eccentric Bushing 2 - V2 (2)
#352175

Eccentric bushing for I.A.C. (Integrated Adjustable Caster). 2 setting (identified by 2 dots) allows for either +2 or -2 caster adjustment depending on the orientation of the bushing. 



Composite Bushing & Ball Mount Set (2+2)
#352179

Set of composite bushings and ball mounts (2 + 2) for front lower suspension arm. The bushing is used to adjust the caster of the front caster block. The composite bushing has a 0° caster pre-setting. A complete set for one car. 



Alu Steering Block - Swiss 7075 T6
#352254

Authentic XRAY alu steering block is CNC-machined from premium Swiss 7075 T6 aluminum. Ultra-strong construction provides long lifespan & durability in even the most extreme racing conditions. 



Alu Caster Block 16 Right - Swiss 7075 T6
#352276

Authentic XRAY RIGHT-side 16 alu caster block is CNC-machined from premium Swiss 7075 T6 aluminum.  



Alu Caster Block 16° Left - Swiss 7075 T6
#352286

Authentic XRAY LEFT-side 16° alu caster block is CNC-machined from premium Swiss 7075 T6 aluminum.  



Composite Bushing for Alu Steering Block (4)
#352290

Molded composite bushings for installing ball-bearings in alu steering blocks #352255 and #352265. Set of 4. 



Steel Steering Block Pivot Pin (2)
#352292

Steel pivot pins for steering. Hardened for very high durability and long lifespan. Set of 2. 



XB8 Front Anti-Roll Bar 1.6mm
#352487

Front anti-roll bar for XB8, XT8 & GTX8 cars, 1.6mm thick.  



XB8 Front Anti-Roll Bar 1.8mm
#352489

Front anti-roll bar for XB8, XT8 & GTX8 cars, 1.8mm thick.  



XB8 Front Anti-Roll Bar 2.0mm
#352490

Front anti-roll bar for XB8, XT8 & GTX8 cars, 2.0mm thick.  



XB8 Front Anti-Roll Bar 2.2mm
#352492

Front anti-roll bar for XB8, 2.2mm thick. Laser-engraved for easy identification. 



XB8 Front Anti-Roll Bar 2.3mm
#352493

Front anti-roll bar for XB8, 2.3mm thick. Laser-engraved for easy identification.
 



XB8 Front Anti-Roll Bar 2.4mm
#352494

Front anti-roll bar for XB8, 2.4mm thick. Laser-engraved for easy identification. 



XB8 Front Anti-Roll Bar 2.5mm
#352495

Front anti-roll bar for XB8, 2.5mm thick. Laser-engraved for easy identification. 



Front Anti-Roll Bar 2.8mm
#352498

Front anti-roll bar for GTX, 2.8mm thick. Laser-engraved for easy identification. 



Ball Stud 6.8mm (4)
#352652

Premium quality 6.8mm ball stud made from special HUDY Spring Steel™. Additionally heat treated for maximum strength, reliability, and long life. Set of 4. 



Ball Stud 6.8mm w Backstop L=6mm - M3x11 - Nickel Coated (2)
#352659

Ball stud 6.8mm with backstop, made from steel, nickel coated. 



Alu Countersunk Shim for Ball Stud (10)
#352680

Machined alu countersunk shims for use with ball stud. Set of 10. 



Alu Mounting Ball 6.8 - Hard Coated (4)
#353161

CNC-machined 6.8mm dia mounting pivot ball with shoulder,made from premium lightweight 7075 T6 aluminum. Set of 4. 



Alu Pivot Ball 6.8 - Hard Coated (4)
#353171

CNC-machined 6.8mm dia mounting pivot ball,made from premium lightweight 7075 T6 aluminum. Set of 4. 



Graphite Insert for Short Rear Composite Brace - Set
#353281

Reinforcement braces for rear composite brace, stiffen the composite brace and chassis for high-traction tracks. 



XB8 Composite Rear Upright LB - Graphite
#353354-G

Lightweight yet ultra-strong rear upright molded from special graphite composite material.  



Alu Shim 4x7.5x1mm (4)
#353380

Alu shims 4x7.5mm size, 1mm thick. Black color, set of 4. 



Alu Shim 4x7.5x2mm (4)
#353381

Alu shims 4x7.5mm size, 2mm thick. Black color, set of 4. 



Alu Shim 8x10x1.2mm (2)
#353389

Alu shims 8x10 mm size, 1.2 mm thick. Set of 2. 



Rear Anti-Roll Bar 1.8mm
#353418

Rear anti-roll bar for XB8, XT8 & GTX8 cars, 1.8mm thick. 



Rear Anti-Roll Bar 2.0mm
#353420

Rear anti-roll bar for XB8, XT8 & GTX8 cars, 2.0mm thick. 



Rear Anti-Roll Bar 2.2mm
#353422

Rear anti-roll bar 2.2mm thick. 



Rear Anti-Roll Bar 2.4mm
#353424

Rear anti-roll bar 2.4mm thick. 



Rear Anti-Roll Bar 2.5mm
#353425

Rear anti-roll bar for XB8 & XT8, 2.5mm thick. Laser-engraved for easy identification.
 



Rear Anti-Roll Bar 2.6mm
#353426

Rear anti-roll bar 2.6mm thick. 



Rear Anti-Roll Bar 3.0mm
#353430

Rear anti-roll bar 3.0mm thick. 



Rear Anti-Roll Bar 3.2mm
#353432

Rear anti-roll bar 3.2mm thick. 



Rear Wing
#353510

Aerodynamic rear wing molded from a very flexible composite mixture. All edges in critical areas are reinforced to prevent breakage. 



Composite Rear Wing - White
#353511

Aerodynamic rear wing molded from flexible composite material.  



Composite Rear Wing - Yellow
#353511-Y

Aerodynamic rear wing molded from flexible composite material.  



Lexan Rear Wing - 1/8 Off-road
#353512

XRAY super lighweight 1/8 off-road lexan wing designed for a perfect fit to XB8 and working in conjuction with the XRAY off-road bodies.  



Rear Wing - Black
#353515

Aerodynamic rear wing (black) molded from a very flexible composite mixture. All edges in critical areas are reinforced to prevent breakage. 



Rear Wing - Orange
#353516

Aerodynamic rear wing (orange) molded from a very flexible composite mixture. All edges in critical areas are reinforced to prevent breakage. 



Rear Wing - Pink
#353518

Aerodynamic rear wing (pink) molded from a very flexible composite mixture. All edges in critical areas are reinforced to prevent breakage. 



Rear Wing - Yellow
#353519

Aerodynamic rear wing (yellow) molded from a very flexible composite mixture. All edges in critical areas are reinforced to prevent breakage. 



Alu Rear Wing Shim (2)
#353561

Alu rear wing shim for XB and XT series buggies and truggies. Provides additional support to prevent wing from pulling off from mounting screws. Set of 2. 



Alu Center Diff Mounting Plate Set (2)
#354015

Aluminum center diff mounting plate set designed to increase rigidity and strength. CNC-machined from highest-grade aluminum. Like most main alloy components on the XB8 and XB8-TQ, this plate set is finished in XRAY stylish black with trademark silver edging. Includes composite bushings which eliminates vibration and excessive wear of the diff outdrives. 



Alu Center Diff Mounting Plate 7075 T6 (3mm)
#354055

Aluminum center diff mounting plate designed to increase rigidity and strength. CNC-machined from highest-grade 3mm-thick 7075 T6 Swiss aluminum. Stylish XRAY black finish with silver edging.  



Graphite Center Diff. Mounting Plate
#354056

CNC-machined graphite upper plate for center diff mounting. Includes composite inserts for brake cam posts. 



Graphite Ventilated Brake Disk - CNC Machined (2)
#354111

CNC-machined graphite ventilated brake disk.

When using this graphite brake disk, it is necessary to use hardened steel brake pads (#354121) by themselves without Ferodo fibre-style brake pads glued to them. 



LW Ventilated Brake Disk - Laser Cut - Precision-Ground (2)
#354112

Laser-cut, heat-treated, precision-ground ventilated brake disk for XB8 ensures vibration-free operation. Rotating mass is reduced without sacrificing strength or durability. 



Super-Lightweight Ventilated Brake Disk - Precision-Ground (2)
#354113

Laser-cut, heat-treated, precision-ground ventilated super-lightweight brake disk for XB8, GTX and XT8 ensures vibration-free operation. 



Glued Brake Pad Set - Ultra-Efficient (4)
#354131

Factory pre-assembled brake pad set for consistent and precise braking. High-precision, ultra-efficient steel brake pads are CNC-machined and precision ground on both sides for an ultra-smooth surface finish to guarantee maximum braking efficiency. 



Brake Pad SLS (4)
#354132

New ultra-efficient brake pads from special slip-free material. Set of 4. 



Differential Case - V2 - Graphite
#355022-G

Rubber-sealed differential case made from new specially-formulated graphite composite material. Lighter, tougher material with higher temperature and wear resistance, also holds the screws better secured in place. 



Center Differential Case - V2 - Graphite
#355023-G

Large volume rubber-sealed CENTER differential case made from new specially-formulated graphite composite material. Lighter, tougher material with higher temperature and wear resistance, also holds the screws better secured in place. 



Front Diff Large Bevel Gear 41T
#355041

The 41-tooth large bevel gear for front differential is machined from special HUDY steel material which has been specially developed for gear-type products, additionally hardened and precision ground to fit the tightest tolerance requirements for perfect fit with the diff outdrives. 



Center Differential Spur Gear 46T - Large
#355056

46-tooth large external spur gear for center differential. 



Center Differential Spur Gear 47T - Large
#355057

47-tooth large external spur gear for center differential. 



Center Differential Spur Gear 48T - Large
#355058

48-tooth large external spur gear for center differential. 



Center Differential Spur Gear 49T - Large
#355059

49-tooth large external spur gear for center differential. 



Extreme Heat Resistant Center Diff Pin with Inserts (2+4)
#355083

Precision-ground polished steel pin 3.5 x 33 mm for internal satellite gears used in large center differential #355013.  



Extreme Heat Resistant F/R Alu Diff Pin with Inserts (2+4)
#355086

Precision-ground polished alu pin 3.5 x 26.6 mm for internal satellite gears used in large front & rear differentials #355004 and #355005. 



Extreme Heat Resist. Center Alu Diff Pin with Inserts (2+4)
#355087

Precision-ground polished alu pin 3.5 x 33 mm for internal satellite gears used in large center differential #355013.  



XRAY Active Differential™ 43T
#355101

The unique XRAY Active Differential is a high-performance, adjustable front gear differential for XT8 truggies… vastly improving the truggy’s speed and handling characteristics. The special design of the internal components using different angled segments allows the diff gears to engage on-power to increase the forward traction and stability to the truggy, making it faster and easier to drive. 



Active Diff Case
#355120

Molded case for XRAY Active Diff™ made from XRAY's own special composite mixture. The diff body is hand-ground on a precision grinding machine to ensure maximum roundness, and features a molded-in hard steel diff outdrive ring with a high-tolerance, precision-ground inner hole to ensure super-free turning of the outdrives. 



Active Diff Segment 90° (2)
#355125

Standard XRAY Active Diff™ segments are CNC-machined from very tough steel, and have very precisely-machined ‶V※ ramp grooves with 90° angle for easy engagement/disengagement. The segment is hardened to ensure long life and durability. The segments are laser engraved with ‶90°※ for easy and instant recognition. Set of 2. 



Active Diff Segment 120° (2)
#355127

XRAY Active DiffT segments are CNC-machined from very tough steel, and have very precisely-machined "V" ramp grooves with 120 angle for easy disengagement adjustment. 



Active Diff Steel Bevel & Satellite Gears (2+4)
#355130

Precision internal gears of the XRAY Active Diff™ are die-cast and pressed from high-grade steel material using very high pressure to ensure a very strong core, and then are specially hardened to ensure minimal wear and longest life. Includes 2 bevel gears and 4 satellite gears. 



Active Diff Large Bevel Gear 41T
#355141

The 41T diff bevel gear for XRAY Active DiffT is machined from special HUDY steel material which has been specially developed for gear-type products, additionally hardened and precision ground to fit the tightest tolerance requirements for perfect fit with the diff outdrives. 



Active Diff Large Bevel Gear 43T
#355143

The 43T diff bevel gear for XRAY Active Diff™ is machined from special HUDY steel material which has been specially developed for gear-type products, additionally hardened and precision ground to fit the tightest tolerance requirements for perfect fit with the diff outdrives. The gears are individually machined on a precision German gear machine and every gear is individually tested and inspected. The diff gear is then laser engraved with ‶Active Diff 43※ for easy and instant recognition. 



Active Differential Spur Gear 46T
#355146

The 46T diff bevel gear for XRAY Active Diff™ is machined from special HUDY steel material which has been specially developed for gear-type products, additionally hardened and precision ground to fit the tightest tolerance requirements for perfect fit with the diff outdrives.  



Active Diff Outdrive Adapter (2) - Hudy Spring Steel™
#355160

Diff outdrives for XRAY Active Diff™ of self-developed, world-renowned HUDY Spring Steel™ – the toughest steel material available – are CNC-machined on precision German long-turn machines. The diff outdrives are additionally ground and strategically lightened to reduce rotating weight. The diff outdrives are then further hardened to ensure maximum strength and longest lifespan. The diff outdrive shafts are additionally precision hand-ground to a very high tolerance to ensure an ultra-smooth tight fit in the diff body and diff gear. Set of 2. 



Active Diff. Outdrive Adapter - Lightweight - HSS (2)
#355163

Lightweight CNC-machined diff outdrive adapters for XB8 Active Diff. 



Active Diff Pin (2)
#355180

Precision-ground polished steel pins for XRAY Active Diff™ internal satellite gears. Set of 2. 



Active Diff Pin 2x12 (2)
#355189

Polished chrome pin. Dia. x length = 2mm x 12mm for active diff. Set of 2 pieces. 



Active Diff Bevel Gear Collar (2)
#355195

Machined internal bevel gear collars for XRAY Active Diff™. Set of 2. 



Alu CVD Drive Axle - Hardcoated (4)
#355212

CNC-machined CVD drive axle made from premium lightweight Swiss 7075 T6 hardcoated aluminum. 



CVD Adjustable Drive Axle - HUDY Spring Steel™ (2)
#355215

Drive axle for XRAY adjustable drive shafts. Drive shaft length adjustment uses 4 different connecting hole positions at the drive axle end to allow changes to overall driveshaft length.  



Alu Wheel Axle - Hard Coated (2)
#355250

Hardcoated aluminum wheel axle. Set of 2. 



Alu Wheel Axle Offset +1mm - Hard Coated
#355251

Hardcoated aluminum wheel axle with +1mm offset. Using these wheel axles will increase the overall track width by 2mm, making the car more stable and easier to drive.  



Alu Wheel Axle Offset +2mm - Hard Coated
#355252

Hardcoated aluminum wheel axles with +2mm offset. Using these wheel axles will increase the overall track width by 4mm, making the car more stable and easier to drive. Set of 2. Wheel axles can be mounted in both front and rear. 



Wheel Nut - Hard Coated (2)
#355260

Hardcoated aluminum wheel nut. Set of 2. 

Replaced by Alu Wheel Nut - Ribbed - Hard Coated (2) 



Wheel Nut With Cover - Hard Coated (2)
#355265

Hardcoated aluminum wheel nut with cover for XB8 wheels. Using these wheel nuts, you will never have problems anymore with dirt getting into the wheel axle assembly! Fits front and rear wheel axles.  



Front Universal Central Drive Shaft - Spring Steel - Set
#355426

Optional front universal central drive shaft, CNC-machined from world-renowned HUDY Spring Steel. Ensures more free movement of the drivetrain and improves traction.

 



Composite Radio Case Set
#356003

All-new radio plate design incorporates a new compact composite radio box. Batteries are now located at the front for better balance. Clean and smooth 1-piece plate design.  



Battery Cable With Switch
#356050

The battery cable with switch connects the receiver battery to the receiver by way of an on/off switch. It is delivered together with switch cover.  



Graphite Receiver Case Top Plate
#356119

Graphite receiver case top plate, CNC-machined from premium high-grade graphite material for superior strength and light weight. 



XB8E'16 Composite Battery Plate
#356152

Battery plate made from tough composite material. The barriers eliminate battery movement, and the rear area is dedicated for speed controller placement. 



Velcro Battery Strap 20x300mm (2)
#356160

Set of two replacement 20x300mm Velcro™ straps. These straps are used to secure the battery. 



Alu Mount for Receiver Box
#356194

CNC-machined alu mount for receiver box. 



Alu Eccentric Mount for Receiver Box
#356197

CNC-machined eccentric alu mount for receiver box. 



2-Way Flow Delrin Shock Piston 5-H.(1.5)+2-H.(1.0) (2)
#358027

Set of composite molded shock pistons for two shock absorbers with five 1.5mm holes & two 1.0mm holes.  



2-Way Flow Delrin Shock Piston 6-H.(1.3)+2-H.(1.1) (2)
#358028

Set of composite molded shock pistons for two shock absorbers with six 1.3mm holes & two 1.1mm holes. 



2-Way Flow Delrin Shock Piston 6-H.(1.4)+2-H.(1.1) (2)
#358029

Set of composite molded shock pistons for two shock absorbers with six 1.4mm holes & two 1.1mm holes. 



2-Way Flow Delrin Shock Piston 8-H.(1.2)+2-H.(1.2) (2)
#358030

Set of composite molded shock pistons for two shock absorbers with eight 1.2mm holes & two 1.2mm holes. 



2-Way Flow Delrin Shock Piston 8-H.(1.3)+2-H.(1.2) (2)
#358031

Set of composite molded shock pistons for two shock absorbers with eight 1.3mm holes & two 1.2mm holes.  



XB8 Alu Shock Cap Nut with Vent Hole - Black Coated (2)
#358054

CNC-machined 1-piece alu shock cap for XB8, made from premium lightweight 7075 T6 aluminum. Features a small vent hole that makes shock assembly very predictable and easy, allowing excess shock oil to easily escape. Machined interior ridges ensure proper placement and sealing of the super-soft silicone membrane.  



XB8 Alu Shock Cap Nut 4x Bleed Hole - Black Coated (2)
#358055

CNC-machined 1-piece alu shock cap made from premium lightweight 7075 T6 aluminum.  



Shock Rubber Membrane (4)
#358082

Shock membrane for shock absorbers, made of soft molded rubber. The new shock membranes are now wider to fit the new big-bore shocks.  



Shock Rubber Membrane Ribbed (4)
#358083

Newly designed improved shock membranes provide more consistent feel during long finals with no sign of fade. Shock membrane for shock absorbers, made of soft molded rubber. The new shock membranes are wider to fit the big-bore shocks. The material has been also improved to guarantee the same damping characteristics from the beginning of the race to the end even after excessive loads. Set of 4. 



XB8 Shock Rubber Membrane Bottom Ribbed (4)
#358084

Shock membrane for XB8 shocks, made from soft molded rubber. Features internal bottom ribs to maintain shape. The specially-formulated rubber material of the shock membrane ensures equal damping characteristics from the beginning of the race to the end, even after extreme operation. Set of 4. Fits XB8. 



XB8 Shock Rubber Valve (4)
#358085

Rubber valve for 2-way flow in shock pistons. Suitable for shocks in XB8, XT8, and GTX. 



XB8 Shock Rubber Membrane Cell - Medium (4)
#358087-M

Shock membrane for XB8 shocks, made from medium molded rubber. The cell shock membranes have less air gap that helps to generate more grip of the car.  



XB8 Shock Rubber Membrane Cell - Soft (4)
#358087-S

Shock membrane for XB8 shocks, made from soft molded rubber. The cell shock membranes have less air gap that helps to generate more grip of the car.  



Shock Foam Insert (4)
#358090

Foam inserts for XRAY shocks, go between shock upper mount and rubber membrane. Prevents membrane collapse. Provides slightly more steering, and more stability when landing from big jumps.  



XRAY Rear Spring Set Progressive C=0.5-0.6 (2)
#358274

New progressive springs marked 0.5-0.6 are soft at the beginning of the compression (hardness 0.5) but become harder as the spring is compressed more in the middle, with hardness 0.6 at the end. Pearl-grey color for easy identification. Set of 2. 



XRAY Progressive Springs - Soft - 1 stripe (2)
#358275

New SOFT progressive springs are soft at the beginning of the compression but become harder as the spring is compressed more in the middle, with highest hardness at the end. Marked with ONE stripe for easy identification. 



XRAY Progressive Springs - Soft-Medium - 2 stripes (2)
#358276

New SOFT-MEDIUM progressive springs are soft at the beginning of the compression but become harder as the spring is compressed more in the middle, with highest hardness at the end. Marked with TWO stripes for easy identification. 



XRAY Progressive Springs - Medium - 3 stripes - V2 (2)
#358277

New MEDIUM progressive springs are soft at the beginning of the compression but become harder as the spring is compressed more in the middle, with highest hardness at the end. Marked with THREE stripes for easy identification. 



XRAY Progressive Springs - Medium-Hard - 4 stripes (2)
#358278

MEDIUM-HARD progressive springs have medium firmness at the beginning of the compression but become firmer as the spring is compressed more in the middle, with hard firmness at the end. 



XRAY Long Progressive Springs - Soft-Medium - 2 stripes - V2 (2)
#358279

Long progressive springs are soft at the beginning of the compression but become harder as the spring is compressed more in the middle, with highest hardness at the end.  



XRAY Long Progressive Springs - Medium - 3 stripes - V2 (2)
#358280

Long progressive springs are soft at the beginning of the compression but become harder as the spring is compressed more in the middle, with highest hardness at the end.  



XRAY Long Progressive Springs - Medium-Hard - 4 stripes (2)
#358281

MEDIUM-HARD long progressive springs have medium firmness at the beginning of the compression but become firmer as the spring is compressed more in the middle, with hard firmness at the end.  



Rear Spring Set C = 0.47 - White (2)
#358282

New ultimate-match rear shock springs (C = 0.47) for XRAY rear shocks. White color. Set of 2. 



Rear Spring Set C = 0.50 - Grey (2)
#358283

New ultimate-match rear shock springs (C = 0.50) for XRAY rear shocks. Grey color. Set of 2. 



Rear Spring Set C = 0.53 - Silver (2)
#358284

New ultimate-match rear shock springs (C = 0.53) for XRAY rear shocks. Silver color. Set of 2. 



Rear Spring Set C = 0.57 - Light-Blue (2)
#358285

New ultimate-match rear shock springs (C = 0.57) for XRAY rear shocks. Light blue color. Set of 2. 



Rear Spring Set C = 0.61 - Blue (2)
#358286

New ultimate-match rear shock springs (C = 0.61) for XRAY rear shocks. Blue color. Set of 2. 



Rear Spring Set C = 0.65 - Violet (2)
#358287

New ultimate-match rear shock springs (C = 0.65) for XRAY rear shocks. Violet color. Set of 2. 



Rear Spring Set C = 0.70 - Purple (2)
#358288

New ultimate-match rear shock springs (C = 0.70) for XRAY rear shocks. Purple color. Set of 2. 



XRAY Front Progressive Springs - 3 Dots (2)
#358315

New FRONT progressive springs are slightly progressive, but under more compression change characteristics to become more linear.  



XRAY Front Spring 69mm - 4 Dots (2)
#358316

New FRONT progressive springs are slightly progressive, but under more compression they change characteristics to become more linear.  



XRAY Front Spring 69mm - 5 Dots (2)
#358317

FRONT progressive springs. Slightly progressive, but under more compression they change characteristics to become more linear.  



XRAY Rear Progressive Springs - 3 Dots (2)
#358335

New REAR progressive springs are slightly progressive, but under more compression change characteristics to become more linear.  



XRAY Rear Spring 85mm - 4-Dots (2)
#358336

New REAR progressive springs are slightly progressive, but under more compression they change characteristics to become more linear.  



4-Shoe Clutch - Complete Set
#358400

Complete set of 4-shoe clutch system includes flywheel, lightweight medium aluminum clutch shoes, gold (soft) clutch springs, assembly screws, flywheel collar, and flywheel nut. 



3BB Clutch Bell 13T + 3x Ball-Bearings
#358413

13-tooth clutch bell made from HUDY steel, precision-machined on a special gear machine. 



3BB Clutch Bell 13T - Lightweight + 3x Ball-Bearings
#358413-L

13-tooth clutch bell made from HUDY steel, precision-machined on a special gear machine. 



4-Shoe Flywheel + Flywheel Collar
#358430

Alu flywheel for 4-shoe clutch made from Swiss 7075 T6 alu and hardcoated for extra durability. 



4-Shoe Flywheel Nut - HUDY Spring Steel™
#358450

CNC-machined flywheel nut for 4-shoe clutch. Made from HUDY Spring Steel™. 



4-Shoe Alu Clutch Shoe - Soft (4)
#358458

Aluminum Soft clutch shoes for 4-shoe clutch. Set of 4. 



4-Shoe Alu Clutch Shoe - Medium (4)
#358459

Aluminum Medium clutch shoes for 4-shoe clutch. Set of 4. 



4-Shoe Alu Clutch Shoe - Hard (4)
#358460

Aluminum Hard clutch shoes for 4-shoe clutch. Set of 4. 



4-Shoe Graphite Clutch Shoe - Long Life (4)
#358461

Graphite clutch shoe made from special graphite mixture material.  



4-Shoe Clutch Springs - Gold - Soft (4)
#358480

Soft clutch springs for 4-shoe clutch. Softer spring allows for earlier engagement. 



4-Shoe Clutch Springs - Grey - Medium (4)
#358481

Medium clutch springs for 4-shoe clutch. Medium spring allows for good overall engagement point, though with slightly different characteristics in comparison with the soft springs. 



4-Shoe Clutch Springs - Silver - Hard (4)
#358482

Hard clutch springs for 4-shoe clutch. Hard spring allows for later engagement point. 



4-Shoe Screw Pin - HUDY Spring Steel
#358499

Easy to install assembly screws for 4-shoe clutch system. Set of 4pcs. 



Clutch Set - High Torque - V2
#358500

High-Torque Clutch set for XB8 is an important performance upgrade. The clutch provides a smoother and more continuous transfer of power from engine at very high RPM.  



Clutch Bell 12T
#358512

12-tooth clutchbell made from HUDY steel. Precision machined on a special gear machine. The new 12T clutchbell adds to the already extensive line up of race-ready clutchbells. 



Clutch Bell 14T with Ball-Bearings
#358514

14-tooth clutch bell made from HUDY steel. Precision machined on a special gear machine. 



Clutch Bell 15T
#358515

15-tooth clutch bell made from HUDY steel. Precision machined on a special gear machine. 

Replaced by Clutch Bell 15T with Oversized 5x12x4mm Ball-Bearings - V2 



Clutch Bell 13T - Lightweight
#358517

13-tooth clutch bell made from HUDY steel. Precision machined on a special gear machine, strategically lightened without sacrificing strength or durability. 



Clutch Bell 14T - Lightweight
#358518

14-tooth clutch bell made from HUDY steel. Precision machined on a special gear machine, strategically lightened without sacrificing strength or durability. 



Alu Flywheel - High Torque
#358532

High-Torque flywheel made from tough Swiss 7075 T6 alu and hardcoated for extra durability.  



Flywheel Collar
#358540

Tapered collar for mounting flywheel to engine crankshaft. 



Alu Clutch Shoes - Light 1.71g - CNC Machined (3)
#358561

These new 1.71g clutch shoes are slightly lighter than the stock aluminum shoes, allowing the engine to spool up a bit more before the shoes grab the flywheel. The end result is a clutch that will engage later in the powerband giving more rip out of the corners.  

Replaced by Alu Clutch Shoe - Hard (3) 



Alu Clutch Shoe - High Torque (3)
#358562

Aluminum clutch shoes for High-Torque clutch. Set of 3. 

Replaced by Alu Clutch Shoe - Hard (3) 



Graphite Clutch Shoe - Long Life (2)
#358563

Graphite clutch shoe made from special graphite mixture material.  



Clutch Springs 0.9mm (3)
#358580

Steel clutch springs. Wire diameter 0.9mm (soft) for earlier clutch engagement. Set of 3. 

Replaced by Clutch Springs - Soft (3) 



Clutch Springs 1.1mm (3)
#358582

Steel clutch springs. Wire diameter 1.1mm (hard) for later clutch engagement. Set of 3. 



Clutch Springs - Soft (3)
#358583

New soft clutch springs with improved shape helps prevent breakage. Softer spring allows for earlier engagement. 



Clutch Springs - Medium (3)
#358584

New medium clutch springs with improved shape helps prevent breakage. Medium spring allows for good overall engagement point, though with slightly different characteristics in comparison with the earlier springs. 



Clutch Springs - Hard (3)
#358585

New hard clutch springs with improved shape helps prevent breakage. Harder spring allows for later engagement. 

Replaced by High Torque Clutch Springs - Silver - Hard (3) 



Clutch Springs - Extra Hard (3)
#358586

New hard clutch springs with improved shape helps prevent breakage. Extra hard spring allows for later engagement. 

Replaced by High Torque Clutch Springs - Silver - Hard (3) 



High Torque Clutch Springs - Gold - Soft (3)
#358587

Soft clutch springs for High-Torque clutch. Softer spring allows for earlier engagement. Gold color. Set of 3. 



High Torque Clutch Springs - Medium (3)
#358588

Medium clutch springs for High-Torque clutch. Medium spring allows for good overall engagement point, though with slightly different characteristics in comparison with earlier springs. 



Alu Monoblock Engine Mount - Swiss 7075 T6
#358709

Alu monoblock engine mount provides solid engine mounting and easy adjustment. Monoblock design is stiffer than standard single engine mounts. 



Alu Motor Mount Plate
#358783

Alu motor plate for electric motor. CNC-machined from premium lightweight Swiss 7075 T6 aluminum, hardcoated for extra durability and long life.  



XB8E/XT8E Alu Motor Mount
#358786

Alu motor plate for electric motor, CNC-machined from premium lightweight Swiss 7075 T6 aluminum, hardcoated for extra durability and long life.  



Composite Air Filter Cover
#358832

Molded composite optional cover for air filter protects the filter and is recommended for muddy and rainy conditions. The cover is a direct fit for the 808 low-profile air filter assembly. 



Air Filter Foam - Low Profil (10)
#358842

Inner + outer low-profile foam filter elements, and a tube of air filter oil. Set of 10. 



Alu Fuel Filter Set
#358900

Large capacity aluminum fuel filter set. This fuel filter is different from others as it is captured in a holder and will not turn as the result of vibration. 



Composite Fuel Filter Set
#358901

Fuel filter set made from tough composite material and the aluminum cap is machined from premium aluminum. A sieve is installed in the fuel filter. The body of the fuel filter has a slot that enables the filter to sit in the holder perfectly and prevents the filter from turning. 



Silicone Tubing 1m (2.4 x 5.5mm) Fluorescent Yellow
#358951

Thick silicone fuel tubing. 2.4mm ID, 1m length. Fluorescent yellow colour. 



Truggy Wheels Aerodisk - White (4)
#359830

XRAY Aerodisk truggy wheels molded from light yet very durable material and are well suited for high-competition truggy racing. XRAY Aerodisk truggy wheels have offset 19.5. Set of 4. 



Truggy Wheels Aerodisk - Orange (4)
#359836

XRAY Aerodisk truggy wheels (orange) molded from light yet very durable material and are well suited for high-competition truggy racing. XRAY Aerodisk truggy wheels have offset 19.5. Set of 4. 



Truggy Wheels Aerodisk - Pink (4)
#359838

XRAY Aerodisk truggy wheels (pink) molded from light yet very durable material and are well suited for high-competition truggy racing. XRAY Aerodisk truggy wheels have offset 19.5. Set of 4. 



Truggy Wheels Aerodisk - Yellow (4)
#359839

XRAY Aerodisk truggy wheels (yellow) molded from light yet very durable material and are well suited for high-competition truggy racing. XRAY Aerodisk truggy wheels have offset 19.5. Set of 4. 



XRAY Truggy Pin Tire - Thrax + Foam Inserts (2)
#359930

XRAY Thrax low-profile truggy tires ensure high traction and high speed while the large sidewalls are designed for more controllable and consistent side bite. The tires are made from soft compound to generate sufficient grip in most racing conditions. A set of foam inserts is also included. Set of 2. 



Connecting Cable Receiver/Batt. Pack
#389135

Connection cable for plugging receiver battery pack into the receiver. Standard Futaba J connector on receiver end, micro battery connector on the battery end. 



XRAY XT8 Sticker for Body - White
#397346

Set of black&white transparent stickers for your XT8 body. Fits any body and can be used for tool box as well.  



XRAY Truggy Wheel Stickers - Die-Cut - Orange
#397351

Flashy orange FireStylin' full-colour graphic set for Truggy dish wheels makes a bright, bold visual statement, setting your car apart from the crowd. Made from die-cut tough, self-adhesive vinyl for easy application and long wear. 



XRAY Truggy Wheel Stickers - Die-Cut - Blue
#397352

Flashy blue FireStylin' full-colour graphic set for Truggy dish wheels makes a bright, bold visual statement, setting your car apart from the crowd. Made from die-cut tough, self-adhesive vinyl for easy application and long wear. 



XRAY Truggy Wheel Stickers - Die-Cut - Green
#397353

Flashy green FireStylin' full-colour graphic set for Truggy dish wheels makes a bright, bold visual statement, setting your car apart from the crowd. Made from die-cut tough, self-adhesive vinyl for easy application and long wear. 



XRAY Truggy Wheel Stickers - Die-Cut - Pink
#397354

Flashy pink FireStylin' full-colour graphic set for Truggy dish wheels makes a bright, bold visual statement, setting your car apart from the crowd. Made from die-cut tough, self-adhesive vinyl for easy application and long wear. 



Hex Screw SH M4x7 With Hex In Bottom (4)
#902407

M4x7 button-head machine screw, hex drive with hex also in the bottom. This screw can be used as optional downstop screw for XB8 kits.  



Screw Phillips 2x6 (10)
#907206

M2x6 pan-head machine screw, Phillips drive. Set of 10 pieces. 



Washer S 6x18x0.3 (10)
#964061

Flat washer. ID x OD x thickness = 6mm x 18mm x 0.3mm. Set of 10. 



Washer S 6x18x0.5 (10)
#964062

Flat washer. ID x OD x thickness = 6mm x 18mm x 0.5mm. Set of 10. 



Washer S 6x10x0.2 (10)
#964063

Flat washer. ID x OD x thickness = 6mm x 10mm x 0.2mm. Set of 10. 



Washer S 6x10x0.3 (10)
#964064

Flat washer. ID x OD x thickness = 6mm x 10mm x 0.3mm. Set of 10. 



ID Product Name Released
352174 Steel Eccentric Bushing 1 - V2 (2) Aug. 01, 2019
352175 Steel Eccentric Bushing 2 - V2 (2) Aug. 01, 2019
358400 4-Shoe Clutch - Complete Set May 31, 2019
353354-G XB8 Composite Rear Upright LB - Graphite Apr. 24, 2019
355086 Extreme Heat Resistant F/R Alu Diff Pin with Inserts (2+4) Mar. 25, 2019
355087 Extreme Heat Resist. Center Alu Diff Pin with Inserts (2+4) Mar. 25, 2019
358087-M XB8 Shock Rubber Membrane Cell - Medium (4) Feb. 21, 2019
358413 3BB Clutch Bell 13T + 3x Ball-Bearings Feb. 19, 2019
358413-L 3BB Clutch Bell 13T - Lightweight + 3x Ball-Bearings Feb. 19, 2019
358430 4-Shoe Flywheel + Flywheel Collar Feb. 19, 2019
358450 4-Shoe Flywheel Nut - HUDY Spring Steel™ Feb. 19, 2019
358458 4-Shoe Alu Clutch Shoe - Soft (4) Feb. 19, 2019
358459 4-Shoe Alu Clutch Shoe - Medium (4) Feb. 19, 2019
358460 4-Shoe Alu Clutch Shoe - Hard (4) Feb. 19, 2019
358461 4-Shoe Graphite Clutch Shoe - Long Life (4) Feb. 19, 2019
358480 4-Shoe Clutch Springs - Gold - Soft (4) Feb. 19, 2019
358481 4-Shoe Clutch Springs - Grey - Medium (4) Feb. 19, 2019
358482 4-Shoe Clutch Springs - Silver - Hard (4) Feb. 19, 2019
358499 4-Shoe Screw Pin - HUDY Spring Steel Feb. 19, 2019
352498 Front Anti-Roll Bar 2.8mm Feb. 11, 2019