|
Receiver Battery Pack Intellect 1400mAh NiMH - 6.0V
#339111
XRAY introduces a new 5-cell (6.0V) inline battery pack made from ultra-high performance Intellect IB1400mAh NiMH cells. These 2/3A cells offer low resistance and will maintain their high voltage under load, allowing them to easily provide power to high-powered servos without a performance decrease.
|
|
|
Composite Chassis Side Guard L+R - Soft
#351159-S
The composite side guards protect the car, muffler, and fuel tank from side impacts. The side guards perfectly fit the chassis and seal against dirt. Molded from SOFT composite mixture for increased flex to generate more traction.
|
|
|
Graphite Body Protector (F+R)
#351311
CNC-machined front and rear upper body protectors made from premium-grade graphite material, specially designed to protect the body over damage.
|
|
|
Steel Eccentric Bushing 1° (2)
#352171
Eccentric bushing for I.A.C. (Integrated Adjustable Caster). 1° setting (identified by 1 dot) allows for either +1° or -1° caster adjustment depending on the orientation of the bushing. Made from famous Hudy Spring Steel™. Set of 2.
|
|
|
Steel Eccentric Bushing 2° (2)
#352172
Eccentric bushing for I.A.C. (Integrated Adjustable Caster). 2° setting (identified by 2 dots) allows for either +2° or -2° caster adjustment depending on the orientation of the bushing. Made from Hudy Spring Steel™. Set of 2.
|
|
|
Steel Eccentric Bushing 1 - V2 (2)
#352174
Eccentric bushing for I.A.C. (Integrated Adjustable Caster). 1 setting (identified by 1 dot) allows for either +1 or -1 caster adjustment depending on the orientation of the bushing.
|
|
|
Steel Eccentric Bushing 2 - V2 (2)
#352175
Eccentric bushing for I.A.C. (Integrated Adjustable Caster). 2 setting (identified by 2 dots) allows for either +2 or -2 caster adjustment depending on the orientation of the bushing.
|
|
|
Composite Bushing & Ball Mount Set (2+2)
#352179
Set of composite bushings and ball mounts (2 + 2) for front lower suspension arm. The bushing is used to adjust the caster of the front caster block. The composite bushing has a 0° caster pre-setting. A complete set for one car.
|
|
|
Alu Steering Block - Swiss 7075 T6
#352254
Authentic XRAY alu steering block is CNC-machined from premium Swiss 7075 T6 aluminum. Ultra-strong construction provides long lifespan & durability in even the most extreme racing conditions.
|
|
|
Ball Stud 6.8mm (4)
#352652
Premium quality 6.8mm ball stud made from special HUDY Spring Steel™. Additionally heat treated for maximum strength, reliability, and long life. Set of 4.
|
|
|
Rear Wing
#353510
Aerodynamic rear wing molded from a very flexible composite mixture. All edges in critical areas are reinforced to prevent breakage.
|
|
|
Lexan Rear Wing - 1/8 Off-road
#353512
XRAY super lighweight 1/8 off-road lexan wing designed for a perfect fit to XB8 and working in conjuction with the XRAY off-road bodies.
|
|
|
Rear Wing - Black
#353515
Aerodynamic rear wing (black) molded from a very flexible composite mixture. All edges in critical areas are reinforced to prevent breakage.
|
|
|
Rear Wing - Orange
#353516
Aerodynamic rear wing (orange) molded from a very flexible composite mixture. All edges in critical areas are reinforced to prevent breakage.
|
|
|
Rear Wing - Pink
#353518
Aerodynamic rear wing (pink) molded from a very flexible composite mixture. All edges in critical areas are reinforced to prevent breakage.
|
|
|
Rear Wing - Yellow
#353519
Aerodynamic rear wing (yellow) molded from a very flexible composite mixture. All edges in critical areas are reinforced to prevent breakage.
|
|
|
Alu Rear Wing Shim (2)
#353561
Alu rear wing shim for XB and XT series buggies and truggies. Provides additional support to prevent wing from pulling off from mounting screws. Set of 2.
|
|
|
Alu Center Diff Mounting Plate Set (2)
#354015
Aluminum center diff mounting plate set designed to increase rigidity and strength. CNC-machined from highest-grade aluminum. Like most main alloy components on the XB8 and XB8-TQ, this plate set is finished in XRAY stylish black with trademark silver edging. Includes composite bushings which eliminates vibration and excessive wear of the diff outdrives.
|
|
|
Differential Case - V2 - Graphite
#355022-G
Rubber-sealed differential case made from new specially-formulated graphite composite material. Lighter, tougher material with higher temperature and wear resistance, also holds the screws better secured in place.
|
|
|
Center Differential Case - V2 - Graphite
#355023-G
Large volume rubber-sealed CENTER differential case made from new specially-formulated graphite composite material. Lighter, tougher material with higher temperature and wear resistance, also holds the screws better secured in place.
|
|
|
Front Diff Large Bevel Gear 41T
#355041
The 41-tooth large bevel gear for front differential is machined from special HUDY steel material which has been specially developed for gear-type products, additionally hardened and precision ground to fit the tightest tolerance requirements for perfect fit with the diff outdrives.
|
|
|
XRAY Active Differential™ 43T
#355101
The unique XRAY Active Differential is a high-performance, adjustable front gear differential for XT8 truggies⦠vastly improving the truggyâ™s speed and handling characteristics. The special design of the internal components using different angled segments allows the diff gears to engage on-power to increase the forward traction and stability to the truggy, making it faster and easier to drive.
|
|
|
Active Diff Case
#355120
Molded case for XRAY Active Diff™ made from XRAY's own special composite mixture. The diff body is hand-ground on a precision grinding machine to ensure maximum roundness, and features a molded-in hard steel diff outdrive ring with a high-tolerance, precision-ground inner hole to ensure super-free turning of the outdrives.
|
|
|
Active Diff Segment 90° (2)
#355125
Standard XRAY Active Diff™ segments are CNC-machined from very tough steel, and have very precisely-machined âśVâť ramp grooves with 90° angle for easy engagement/disengagement. The segment is hardened to ensure long life and durability. The segments are laser engraved with âś90°❠for easy and instant recognition. Set of 2.
|
|
|
Active Diff Segment 120° (2)
#355127
XRAY Active DiffT segments are CNC-machined from very tough steel, and have very precisely-machined "V" ramp grooves with 120 angle for easy disengagement adjustment.
|
|
|
Active Diff Steel Bevel & Satellite Gears (2+4)
#355130
Precision internal gears of the XRAY Active Diff™ are die-cast and pressed from high-grade steel material using very high pressure to ensure a very strong core, and then are specially hardened to ensure minimal wear and longest life. Includes 2 bevel gears and 4 satellite gears.
|
|
|
Active Diff Large Bevel Gear 41T
#355141
The 41T diff bevel gear for XRAY Active DiffT is machined from special HUDY steel material which has been specially developed for gear-type products, additionally hardened and precision ground to fit the tightest tolerance requirements for perfect fit with the diff outdrives.
|
|
|
Active Diff Large Bevel Gear 43T
#355143
The 43T diff bevel gear for XRAY Active Diff™ is machined from special HUDY steel material which has been specially developed for gear-type products, additionally hardened and precision ground to fit the tightest tolerance requirements for perfect fit with the diff outdrives. The gears are individually machined on a precision German gear machine and every gear is individually tested and inspected. The diff gear is then laser engraved with âśActive Diff 43âť for easy and instant recognition.
|
|
|
Active Differential Spur Gear 46T
#355146
The 46T diff bevel gear for XRAY Active Diff™ is machined from special HUDY steel material which has been specially developed for gear-type products, additionally hardened and precision ground to fit the tightest tolerance requirements for perfect fit with the diff outdrives.
|
|
|
Active Diff Outdrive Adapter (2) - Hudy Spring Steel™
#355160
Diff outdrives for XRAY Active Diff™ of self-developed, world-renowned HUDY Spring Steel™ ⓠthe toughest steel material available ⓠare CNC-machined on precision German long-turn machines. The diff outdrives are additionally ground and strategically lightened to reduce rotating weight. The diff outdrives are then further hardened to ensure maximum strength and longest lifespan. The diff outdrive shafts are additionally precision hand-ground to a very high tolerance to ensure an ultra-smooth tight fit in the diff body and diff gear. Set of 2.
|
|
|
Active Diff Pin (2)
#355180
Precision-ground polished steel pins for XRAY Active Diff™ internal satellite gears. Set of 2.
|
|
|
Alu Wheel Axle Offset +1mm - Hard Coated
#355251
Hardcoated aluminum wheel axle with +1mm offset. Using these wheel axles will increase the overall track width by 2mm, making the car more stable and easier to drive.
|
|
|
Alu Wheel Axle Offset +2mm - Hard Coated
#355252
Hardcoated aluminum wheel axles with +2mm offset. Using these wheel axles will increase the overall track width by 4mm, making the car more stable and easier to drive. Set of 2. Wheel axles can be mounted in both front and rear.
|
|
|
Wheel Nut With Cover - Hard Coated (2)
#355265
Hardcoated aluminum wheel nut with cover for XB8 wheels. Using these wheel nuts, you will never have problems anymore with dirt getting into the wheel axle assembly! Fits front and rear wheel axles.
|
|
|
XB8 Alu Shock Cap Nut with Vent Hole - Black Coated (2)
#358054
CNC-machined 1-piece alu shock cap for XB8, made from premium lightweight 7075 T6 aluminum. Features a small vent hole that makes shock assembly very predictable and easy, allowing excess shock oil to easily escape. Machined interior ridges ensure proper placement and sealing of the super-soft silicone membrane.
|
|
|
Shock Rubber Membrane (4)
#358082
Shock membrane for shock absorbers, made of soft molded rubber. The new shock membranes are now wider to fit the new big-bore shocks.
|
|
|
Shock Rubber Membrane Ribbed (4)
#358083
Newly designed improved shock membranes provide more consistent feel during long finals with no sign of fade. Shock membrane for shock absorbers, made of soft molded rubber. The new shock membranes are wider to fit the big-bore shocks. The material has been also improved to guarantee the same damping characteristics from the beginning of the race to the end even after excessive loads. Set of 4.
|
|
|
XB8 Shock Rubber Membrane Bottom Ribbed (4)
#358084
Shock membrane for XB8 shocks, made from soft molded rubber. Features internal bottom ribs to maintain shape. The specially-formulated rubber material of the shock membrane ensures equal damping characteristics from the beginning of the race to the end, even after extreme operation. Set of 4. Fits XB8.
|
|
|
Shock Foam Insert (4)
#358090
Foam inserts for XRAY shocks, go between shock upper mount and rubber membrane. Prevents membrane collapse. Provides slightly more steering, and more stability when landing from big jumps.
|
|
|
XRAY Rear Spring Set Progressive C=0.5-0.6 (2)
#358274
New progressive springs marked 0.5-0.6 are soft at the beginning of the compression (hardness 0.5) but become harder as the spring is compressed more in the middle, with hardness 0.6 at the end. Pearl-grey color for easy identification. Set of 2.
|
|
|
XRAY Progressive Springs - Soft - 1 stripe (2)
#358275
New SOFT progressive springs are soft at the beginning of the compression but become harder as the spring is compressed more in the middle, with highest hardness at the end. Marked with ONE stripe for easy identification.
|
|
|
XRAY Progressive Springs - Soft-Medium - 2 stripes (2)
#358276
New SOFT-MEDIUM progressive springs are soft at the beginning of the compression but become harder as the spring is compressed more in the middle, with highest hardness at the end. Marked with TWO stripes for easy identification.
|
|
|
XRAY Progressive Springs - Medium - 3 stripes - V2 (2)
#358277
New MEDIUM progressive springs are soft at the beginning of the compression but become harder as the spring is compressed more in the middle, with highest hardness at the end. Marked with THREE stripes for easy identification.
|
|
|
XRAY Front Spring 69mm - 4 Dots (2)
#358316
New FRONT progressive springs are slightly progressive, but under more compression they change characteristics to become more linear.
|
|
|
XRAY Rear Spring 85mm - 4-Dots (2)
#358336
New REAR progressive springs are slightly progressive, but under more compression they change characteristics to become more linear.
|
|
|
Truggy Wheels Aerodisk - White (4)
#359830
XRAY Aerodisk truggy wheels molded from light yet very durable material and are well suited for high-competition truggy racing. XRAY Aerodisk truggy wheels have offset 19.5. Set of 4.
|
|
|
Truggy Wheels Aerodisk - Orange (4)
#359836
XRAY Aerodisk truggy wheels (orange) molded from light yet very durable material and are well suited for high-competition truggy racing. XRAY Aerodisk truggy wheels have offset 19.5. Set of 4.
|
|
|
Truggy Wheels Aerodisk - Pink (4)
#359838
XRAY Aerodisk truggy wheels (pink) molded from light yet very durable material and are well suited for high-competition truggy racing. XRAY Aerodisk truggy wheels have offset 19.5. Set of 4.
|
|
|
Truggy Wheels Aerodisk - Yellow (4)
#359839
XRAY Aerodisk truggy wheels (yellow) molded from light yet very durable material and are well suited for high-competition truggy racing. XRAY Aerodisk truggy wheels have offset 19.5. Set of 4.
|
|
|
XRAY Truggy Pin Tire - Thrax + Foam Inserts (2)
#359930
XRAY Thrax low-profile truggy tires ensure high traction and high speed while the large sidewalls are designed for more controllable and consistent side bite. The tires are made from soft compound to generate sufficient grip in most racing conditions. A set of foam inserts is also included. Set of 2.
|
|
|
Connecting Cable Receiver/Batt. Pack
#389135
Connection cable for plugging receiver battery pack into the receiver. Standard Futaba J connector on receiver end, micro battery connector on the battery end.
|
|
|
XRAY Truggy Wheel Stickers - Die-Cut - Orange
#397351
Flashy orange FireStylin' full-colour graphic set for Truggy dish wheels makes a bright, bold visual statement, setting your car apart from the crowd. Made from die-cut tough, self-adhesive vinyl for easy application and long wear.
|
|
|
XRAY Truggy Wheel Stickers - Die-Cut - Blue
#397352
Flashy blue FireStylin' full-colour graphic set for Truggy dish wheels makes a bright, bold visual statement, setting your car apart from the crowd. Made from die-cut tough, self-adhesive vinyl for easy application and long wear.
|
|
|
XRAY Truggy Wheel Stickers - Die-Cut - Green
#397353
Flashy green FireStylin' full-colour graphic set for Truggy dish wheels makes a bright, bold visual statement, setting your car apart from the crowd. Made from die-cut tough, self-adhesive vinyl for easy application and long wear.
|
|
|
XRAY Truggy Wheel Stickers - Die-Cut - Pink
#397354
Flashy pink FireStylin' full-colour graphic set for Truggy dish wheels makes a bright, bold visual statement, setting your car apart from the crowd. Made from die-cut tough, self-adhesive vinyl for easy application and long wear.
|
|
ID |
Product Name |
Released |
352174 |
|
Aug. 01, 2019 |
352175 |
|
Aug. 01, 2019 |
353354-G |
|
Apr. 24, 2019 |
355086 |
|
Mar. 25, 2019 |
355087 |
|
Mar. 25, 2019 |
358087-M |
|
Feb. 21, 2019 |
352498 |
|
Feb. 11, 2019 |
352160 |
|
Dec. 06, 2018 |
355215 |
|
Dec. 06, 2018 |
358055 |
|
Dec. 06, 2018 |
358087-S |
|
Dec. 06, 2018 |
358085 |
|
Nov. 12, 2018 |
303125-O |
|
Sep. 10, 2018 |
358027 |
|
Jul. 12, 2018 |
358028 |
|
Jul. 12, 2018 |
358029 |
|
Jul. 12, 2018 |
358030 |
|
Jul. 12, 2018 |
358031 |
|
Jul. 12, 2018 |
350906 |
|
Mar. 21, 2018 |
355083 |
|
Mar. 12, 2018 |
| |
|
|