xrayxrayHome XRAY homeXRAY X-shopXRAY X-forumRCAmerica
supportsearchcontactguestbooksite map
newsproductsaboutusworldwide headlines
click to enable quick search
 
T4'20 ARS - Active Rear Suspension Set
#300902

ARS™ suspension set consists of: suspension arms, alu 0° C-hubs, hard steering blocks, and ARS™ linkages which connect suspension holders with the suspension block.  



Alu Countersunk Shim - Orange (4)
#301159-O

Machined alu countersunk shims for use on XRAY Quick Saver™. Orange colour. Set of 4. 



Impact-Absorbing Front Bumper
#301203

Impact -absorbing front bumper is made from high-quality nylon that absorbs the energy from crashes. 



T4'20 Graphite Bumper Upper Holder Brace 3.0mm
#301208

Graphite bumper upper holder brace helps to reduce chassis breakage in serious crashes. 



Graphite Bumper Upper Holder 2.5mm for Adj. Body Mounts
#301210

CNC-machined front upper bumper holder made from premium-grade graphite material. 



Foam Bumper for Adj. Body Mounts - Hard
#301232

High-quality hard front foam bumper, hand-cut from specially-developed extra hard foam material.  



Front Body Mount Set +1mm Height
#301323

XRAY presents +1mm height-adjustable body posts for the T2 and NT1. For serious racers who focus on the small details, body height plays a very important role in the performance of the car and as such, ultra-fine body height tuning was developed by XRAY R&D engineers to address this increasingly important tuning set-up feature. 



Front Body Mount Set +2mm Height
#301324

XRAY presents +2mm height-adjustable body posts for the T2 and NT1. For serious racers who focus on the small details, body height plays a very important role in the performance of the car and as such, ultra-fine body height tuning was developed by XRAY R&D engineers to address this increasingly important tuning set-up feature. 



Composite Front Eccentric 6mm Body Mount Set +1mm Height
#301327

Front eccentric body mount set with 6mm-thick +1mm height-adjustable body posts.  



Composite Front Eccentric 6mm Body Mount Set +2mm Height
#301328

Front eccentric body mount set with 6mm-thick +2mm height-adjustable body posts.  



Composite Rear 6mm Adjustable Body Mount Set +1mm Height
#301337

Rear body mount set with 6mm-thick +1mm height-adjustable body posts.  



Composite Rear 6mm Adjustable Body Mount Set +2mm Height
#301338

Rear body mount set with 6mm-thick +1mm height-adjustable body posts. 



Alu Adjustable Body Post Stop (2)
#301351-O

Very handy, easily externally adjustable body posts from Swiss 7075 T6 aluminum. Allows for adjustment of body height by 3mm without needing to change the position on the body post. 



Alu Adjustable Body Post Stop Nut (2)
#301352-O

Alu body post stop nut for #301351-O made from Swiss 7075 T6 aluminum. Spare part for #301351-O Alu Adjustable Body Post Stop (2). 



T4'20 ULP Graphite Shock Tower Front 3.0mm - Low
#301961

 



T4'20 Graphite Shock Tower Front 3.0mm - SLP
#301962

The SLP (Super-Low Profile) front shock tower allows to mount the shocks lower to lower the CG.  



T4 Alu Adjustment Ball-Bearing Hub (2)
#302063

These beautiful 7075 T6 aluminum adjustable ball-bearing hubs are direct replacement of the standard composite ones included in the kit.  



T4 Alu Adjustment Ball-Bearing Hub - Black (2)
#302063-K

These beautiful 7075 T6 aluminum adjustable ball-bearing hubs are direct replacement of the standard composite ones included in the kit. 



Composite Front Suspension Arm Short - Graphite
#302171-G

The front short arm was redesigned to fit the T4’20 platform. The arm can be used on small technical tracks. Must be used with the optional suspension holders #302710-O and 302720-O.  



Composite Front Suspension Arm Short - Hard
#302171-H

The front short arm was redesigned to fit the T4’20 platform. The arm can be used on small technical tracks. Must be used with the optional suspension holders #302710-O and 302720-O.  



Composite Front Suspension Arm Long Right - Hard
#302173-H

 



Composite Front Suspension Arm Long Left - Hard
#302174-H

 



Graphite Front Lower Arm Plate 1.6mm (L+R)
#302190

Optional graphite front lower arm plate easily changes the hardness of the whole front suspension.  



Graphite Extension Plate for Alu Steering Block (2)
#302206

The graphite extension for alu steering block made from premium-grade graphite material.  



Composite Steering Block - Medium - V2
#302252

Molded composite steering block of “medium” hardness (M) for rubber-tire racing. The steering block features two Ackermann positions, and uses small but robust 5x10 ball-bearings to minimize unsprung weight. Can be also used for foam tires. Fits XRAY T2, T3 cars. 



Composite Steering Block - Graphite
#302254

Molded steering block made from specially-formulated graphite composite material is a perfect balance between reliability and performance.  



Alu Steering Block - Black - Swiss 7075 T6
#302257

Alu steering block CNC-machined from premium lightweight T6 aluminum.  



Ball-Bearing Composite Bushing (4)
#302295

Molded composite bushings for installing ball-bearings in alu steering blocks (302256) and alu rear uprights (303358 and 303359). Set of 4. 



Composite C-Hub Bushing (2+2)
#302296

Composite bushings for T2, T3 alu C-hubs. 



Alu C-Hub Block - Caster 0° - Orange
#302334

CNC-machined highest-quality duraluminum C-hub for XRAY T4. Caster pre-set at 0 degrees. Engraved with "0" for easy identification. Fits left or right sides. Includes two nylon bushings. 



Alu C-Hub Front Block Left - Caster 2° - Orange
#302336

CNC-machined high-quality Swiss 7075 T6 LEFT C-hub. Caster pre-set at 2°, engraved with "2" for easy identification. Orange color. 



Alu C-Hub Front Block Right - Caster 4° - Orange
#302337

CNC-machined highest-quality duaraluminum C-hub for right steering block of T2, T3. Caster pre-set at 4°. Engraved with "R4" to easy identification. Includes two nylon bushings. Use with left-side alu 4° C-hub #302338.  



Alu C-Hub Front Block Left - Caster 4° - Orange
#302338

CNC-machined highest-quality duaraluminum C-hub for left steering block of T2, T3. Caster pre-set at 4°. Engraved with "L4" to easy identification. Includes two nylon bushings. Use with right-side alu 4° C-hub #302337.  



Alu C-Hub Front Block Right - Caster 6° - Orange
#302339

CNC-machined highest-quality duaraluminum C-hub for right steering block of T2, T3. Caster pre-set at 6°. Engraved with "R6" to easy identification. Includes two nylon bushings. Use with left-side alu 6° C-hub #302340.  



Alu C-Hub Front Block Left - Caster 6° - Orange
#302340

CNC-machined highest-quality duaraluminum C-hub for left steering block of T2, T3. Caster pre-set at 6°. Engraved with "L6" to easy identification. Includes two nylon bushings. Use with right-side alu 6° C-hub #302339.  



Composite C-Hub Front Block, Right - 2° Deg.
#302343

Molded C-hub for right steering block of T2, T3. Caster pre-set at 2°. Engraved with "R2" to easy identification. Use with left-side composite 2° C-hub #302344.  



Composite C-Hub Front Block, Left - 2° Deg.
#302344

Molded C-hub for left steering block of T2, T3. Caster pre-set at 2°. Engraved with "L2" to easy identification. Use with right-side composite 2° C-hub #302343.  



Composite C-Hub Front Block, Right - 4° Deg.
#302345

Molded composite C-hub for front right steering block on XRAY T2, T3. Caster pre-set at 4° for neutral handling. Engraved with "4R" for easy identification. Use with left-side composite 4° C-hub #302346. 



Composite C-Hub Front Block, Left - 4° Deg.
#302346

Molded composite C-hub for front left steering block on XRAY T2, T3. Caster pre-set at 4° for neutral handling. Engraved with "4L" for easy identification. Use with left-side composite 4° C-hub #302345. 



Composite C-Hub Front Block, Right - 6° Deg.
#302347

Molded C-hub for right steering block of T2, T3. Caster pre-set at 6°. Engraved with "R6" to easy identification. Use with left-side composite 6° C-hub #302348.  



Composite C-Hub Front Block, Left - 6° Deg.
#302348

Molded C-hub for left steering block of T2, T3. Caster pre-set at 6°. Engraved with "L6" to easy identification. Use with right-side composite 6° C-hub #302347.  



T4'20 Alu C-Hub for ARS - 0° Deg.
#302350

CNC-machined highest-quality aluminum C-hub for ARS suspension. Caster pre-set at 0 degrees. 



T4'20 Alu C-Hub for ARS Right - 2° Deg.
#302351

CNC-machined highest-quality aluminum RIGHT C-hub for ARS suspension. Caster pre-set at 2 degrees.  



T4'20 Alu C-Hub for ARS Left - 2° Deg.
#302352

CNC-machined highest-quality aluminum LEFT C-hub for ARS suspension. Caster pre-set at 2 degrees.  



T4'20 Alu C-Hub for ARS Right - 4° Deg.
#302353

CNC-machined highest-quality aluminum RIGHT C-hub for ARS suspension. Caster pre-set at 4 degrees.  



T4'20 Alu C-Hub for ARS Left - 4° Deg.
#302354

CNC-machined highest-quality aluminum LEFT C-hub for ARS suspension. Caster pre-set at 4 degrees.  



Composite C-Hub Right - 0° Deg. - Medium
#302359

Molded composite C-hub for right steering block. The inside hole was enlarged to allow to use new extra stong ECS driveshafts.  



Composite C-Hub Left - 0° Deg. - Medium
#302360

Molded composite C-hub for left steering block. The inside hole was enlarged to allow to use new extra stong ECS driveshafts.  



Composite C-Hub Right - 2° Deg. - Medium (ECS)
#302361

Molded composite C-hub for right steering block of T2, T3. Caster pre-set at 2°. Medium rigidity for rubber-tire racing. Use with matching left-side C-hub #302362. Can be also used for foam tires. 



Composite C-Hub Left - 2° Deg. - Medium (ECS)
#302362

Molded composite C-hub for left steering block of T2, T3. Caster pre-set at 2°. Medium rigidity for rubber-tire racing. Use with matching right-side C-hub #302361. Can be also used for foam tires. 



Composite C-Hub Right - 6° Deg. - Medium (ECS)
#302365

Molded composite C-hub for right steering block of T2, T3. Caster pre-set at 6°. Medium rigidity for rubber-tire racing. Use with matching left-side C-hub #302366. Can be also used for foam tires. 



Composite C-Hub Left - 6° Deg. - Medium (ECS)
#302366

Molded composite C-hub for left steering block of T2, T3. Caster pre-set at 6°. Medium rigidity for rubber-tire racing. Use with matching right-side C-hub #302365. Can be also used for foam tires. 



Composite C-Hub Right - 0° Deg. - Hard (ECS)
#302369

Molded composite C-hub for right steering block. Caster pre-set at 0°. HARD rigidity for rubber-tire racing and also foam tire racing. Use with matching left-side C-hub #302370. 



Composite C-Hub Left - 0° Deg. - Hard (ECS)
#302370

Molded composite C-hub for left steering block. Caster pre-set at 0°. HARD rigidity for rubber-tire racing and also foam tire racing. Use with matching right-side C-hub #302369. 



Composite C-Hub Right - 2° Deg. - Hard (ECS)
#302371

Molded composite C-hub for right steering block of T2, T3. Caster pre-set at 2°. Hard rigidity for foam-tire racing. Use with matching left-side C-hub #302372. Can be also used for rubber tires. 



Composite C-Hub Left - 2° Deg. - Hard (ECS)
#302372

Molded composite C-hub for left steering block of T2, T3. Caster pre-set at 2°. Hard rigidity for foam-tire racing. Use with matching right-side C-hub #302371. Can be also used for rubber tires. 



Composite C-Hub Right - 4° Deg. - Hard (ECS)
#302373

Molded composite C-hub for right steering block of T2, T3. Caster pre-set at 4°. Hard rigidity for foam-tire racing. Use with matching left-side C-hub #302374. Can be also used for rubber tires. 



Composite C-Hub Left - 4° Deg. - Hard (ECS)
#302374

Molded composite C-hub for left steering block of T2, T3. Caster pre-set at 4°. Hard rigidity for foam-tire racing. Use with matching right-side C-hub #302373. Can be also used for rubber tires. 



Composite C-Hub Right - 6° Deg. - Hard
#302375

Molded composite C-hub for right steering block of T2, T3. Caster pre-set at 6°. Hard rigidity for foam-tire racing. Use with matching left-side C-hub #302376. Can be also used for rubber tires. 



Composite C-Hub Left - 6° Deg. - Hard
#302376

Molded composite C-hub for left steering block of T2, T3. Caster pre-set at 6°. Hard rigidity for foam-tire racing. Use with matching right-side C-hub #302375. Can be also used for rubber tires. 



Composite C-Hub Right - 0° Deg. - Graphite (ECS)
#302379

Molded composite C-hub for right steering block. The inside hole was enlarged to allow to use new extra stong ECS driveshafts. 



Composite C-Hub Left - 0° Deg. - Graphite (ECS)
#302380

Molded composite C-hub for left steering block. The inside hole was enlarged to allow to use new extra stong ECS driveshafts.  



Composite C-Hub Right - 4° Deg. - Graphite (ECS)
#302383

Molded composite C-hub for right steering block. The inside hole was enlarged to allow to use new extra stong ECS driveshafts. 



Composite C-Hub Left - 4° Deg. - Graphite (ECS)
#302384

Molded composite C-hub for left steering block. The inside hole was enlarged to allow to use new extra stong ECS driveshafts.  



Composite C-Hub for Body Upstop Left - 4° Deg. - Graphite
#302384-G

 



Alu Dual Servo Saver Arm + Ball-Bearings (2)
#302525

Set of 2 left & right (identical) alu arms for dual servo saver.  



Alu Shim for Radial Play Adjust. of Steering Arm -Orange (2)
#302544-O

Alu bushing for steering arm eliminates excessive play between the bearings in the steering arm.  



Alu Steering Plate 8.5mm for Dual Servo Saver - Orange - V2
#302547-O

CNC-machined alu steering plate for dual servo saver.  



Adj. Steering Rod L/R 40mm - Hudy Spring Steel™ (2)
#302610

Set of two adjustable steering rod turnbuckles, manufactured from world-renowned top-secret "Hudy Spring Steel". 



Alu Adjustable Turnbuckle 39mm M3 L/R - Orange (2)
#302612-O

For serious racers who are conscious of weight savings, XRAY offers adjustable left & right M3 steering turnbuckles manufactured from strong, lightweight 7075 T6 aluminum. Lighter by 50%. Precision threading for fine toe adjustment. Length of 39mm. Orange color. Set of 2. 



Composite Ball Joint 4.9mm - Closed with Hole (4)
#302665

Molded composite steering ball-joint for T2 family of cars and T3. Fits 5mm pivot ball or ball stud. Set of 4.  



Alu Front Lower 1-Piece Suspension Holder - Front - FF
#302710-O

Authentic XRAY alu front lower suspension holder for the FRONT of the front bulkhead on the T4’14. CNC-machined from premium Swiss 7075 T6 aluminum. Designed to fit new composite eccentric bushings 362315 to increase geometry adjustment.  



Brass Front Lower 1-Piece Suspension Holder - Front - FF
#302711

Authentic XRAY brass front lower suspension holder for the FRONT of the front bulkhead. Adds additional weight to the car to attain the minimum weight limit, and replaces other chassis-mounted weights which negatively influence chassis flex.  



Alu Front Lower 1-Piece Suspension Holder - Front - FF - Low
#302712-O

Authentic XRAY alu front lower suspension holders for the front bulkhead on the T4’18. 



Alu Front Lower 1-Piece Suspension Holder - Rear - FR
#302720-O

Authentic XRAY alu rear lower suspension holder for the REAR of the front bulkhead on the T4’14. CNC-machined from premium Swiss 7075 T6 aluminum, the suspension holder reinforces the chassis and will help to prevent chassis damage in hard crashes.  



Brass Front Lower 1-Piece Suspension Holder - Rear - FR
#302721

Authentic XRAY brass front lower suspension holder for the REAR of the front bulkhead. Adds additional weight to the car to attain the minimum weight limit, and replaces other chassis-mounted weights which negatively influence chassis flex. 



Alu Front Lower 1-Piece Suspension Holder - Rear - FF - Low
#302722-O

Authentic XRAY alu rear lower suspension holders for the front bulkhead on the T4’18.  



T4'20 Anti-Roll Bar Front for Ball-Bearings 1.2mm
#302812

 



T4'20 Anti-Roll Bar Front for Ball-Bearings 1.3mm
#302813

Front anti-roll bar for ball-bearing roll bar mounting system and redesigned to work with the front long suspension arms.  



T4'20 Anti-Roll Bar Front for Ball-Bearings 1.5mm
#302815

Front anti-roll bar for ball-bearing roll bar mounting system and redesigned to work with the front long suspension arms.  



T4'20 ULP Graphite Shock Tower Rear 3.0mm - Low
#302961

 



T4'20 Graphite Shock Tower Rear 3.0mm - SLP
#302962

The SLP (Super-Low Profile) rear shock tower allows to mount the shocks lower to lower the CG.  



Set of Alu Shim (1.0mm, 2.0mm, 3.0mm)
#303121

Ultimate assortment of set-up shims. You can use the shims for easy and accurate adjustment of:
• front and rear roll center
• front bump steer
• front and rear toe-in
• wheelbase  



Alu Shim 3x6x0.5mm - Black (10)
#303121-K

Alu shims 3x6mm size, 0.5mm thick. Black color. Set of 10. 



Alu Shim 3x6x0.5mm - Orange (10)
#303121-O

Alu shims 3x6mm size, 0.5mm thick. Orange color. Set of 10. 



Alu Shim 3x6x1.0mm - Black (10)
#303122-K

Alu shims 3x6mm size, 1mm thick. Black color, set of 10. 



T2 Alu Shim 3x6x1.0mm - Orange (10)
#303122-O

Alu shims 3x6mm size, 1mm thick. Orange color, set of 10. 



Alu Shim 3x6x2.0mm - Black (10)
#303123-K

Alu shims 3x6mm size, 2mm thick. Black color, set of 10. 



T2 Alu Shim 3x6x2.0mm - Orange (10)
#303123-O

Alu shims 3x6mm size, 2mm thick. Orange color, set of 10. 



Alu Shim 3x6x3.0mm (10)
#303125

Alu shims 3x6mm size, 3mm thick. Set of 10. 



Alu Shim 3x6x3.0mm - Black (10)
#303125-K

Alu shims 3x6mm size, 3mm thick. Black color. Set of 10. 



Alu Shim 3x6x3.0mm - Orange (10)
#303125-O

Alu shims 3x6mm size, 3mm thick. Orange color. Set of 10. 



Alu Shim 3x6x5.0mm - Black (10)
#303126-K

Alu shims 3x6mm size, 5mm thick. Black color, set of 10. 



Alu Shim 3x6x4.0mm - Black (10)
#303127-K

Alu shims 3x6mm size, 4mm thick. Black color, set of 10. 



Alu Shim 3x6x6.0mm - Black (10)
#303128-K

Alu shims 3x6mm size, 6mm thick. Black color, set of 10. 



Composite Rear Suspension Arm Long Right - Hard
#303173-H

 



Composite Rear Suspension Arm Long Left - Hard
#303174-H

 



Alu Adjustable Turnbuckle 26mm M3 L/R - Orange (2)
#303212-O

For serious racers who are conscious of weight savings, XRAY offers adjustable left & right M3 steering turnbuckles manufactured from strong, lightweight 7075 T6 aluminum. Lighter by 50%. Precision threading for fine toe adjustment. Length of 26mm. Orange color. Set of 2. 



Composite Upright 1° Outboard Toe-In - Right - Medium
#303351

Molded-composite right rear upright features built-in 1° of outboard toe-in to improve the rotation of the car in corners and prevent suspension geometry changes in serious crashes. Medium rigidity (labeled “M”) specially optimized for rubber-tire racing. Use with matching left-side rear upright 303361. Can be also used for foam tires. 



Composite Upright 0° Outboard Toe-In - Medium
#303352

Molded-composite rear upright features built-in 0° of outboard toe to improve traction and prevent suspension geometry changes in serious crashes. Medium rigidity (labeled “M”) specially optimized for rubber-tire racing. Use on both left and right sides of the car. Can be also used for foam tires. 



Composite Upright 1° Outboard Toe-In - Right - Hard
#303353

Molded-composite right rear upright features built-in 1° of outboard toe-in to improve the rotation of the car in corners and prevent suspension geometry changes in serious crashes. Hard rigidity (labeled “H”) specially optimized for foam-tire racing. Use with matching left-side rear upright 303363. Can be also used for rubber tires. 



Composite Upright 0° Outboard Toe-In - Graphite
#303360

Molded rear upright made from specially-formulated graphite composite material features built-in 0° outboard toe to improve traction and prevent suspension geometry changes in serious crashes. 



Composite Upright 1° Outboard Toe-In - Left - Medium
#303361

Molded-composite left rear upright features built-in 1° of outboard toe-in to improve the rotation of the car in corners and prevent suspension geometry changes in serious crashes. Medium rigidity (labeled “M”) specially optimized for rubber-tire racing. Use with matching right-side rear upright 303351. Can be also used for foam tires. 



Composite Upright 0° Outboard Toe - Medium - 1-Hole
#303362

Molded-composite rear upright features built-in 0° of outboard toe to improve traction and prevent suspension geometry changes in serious crashes. This 1-hole upright may be used on high-traction tracks or tracks with long sweepers, since the position of the center hole will allow faster driving through those corners because of better cornering speed.  



Composite Upright 1° Outboard Toe-In - Left - Hard
#303363

Molded-composite left rear upright features built-in 1° of outboard toe-in to improve the rotation of the car in corners and prevent suspension geometry changes in serious crashes. Hard rigidity (labeled “H”) specially optimized for foam-tire racing. Use with matching right-side rear upright 303353. Can be also used for rubber tires. 



Composite Upright 0° Outboard Toe - Hard - 1-Hole
#303364

Molded-composite rear upright features built-in 0° of outboard toe to improve traction and prevent suspension geometry changes in serious crashes. This 1-hole upright may be used on high-traction tracks or tracks with long sweepers, since the position of the center hole will allow faster driving through those corners because of better cornering speed. 



T4'20 Alu Lower 2-Piece Suspens. 0.25 Eccentric Holder Stand
#303731

 



Anti-Roll Bar Rear for Ball-Bearings 1.1mm
#303801

Rear anti-roll bar redesigned to work with new bulkheads and ball-bearing roll bar mounting system.  



Anti-Roll Bar Rear for Ball-Bearings 1.2mm
#303802

Rear anti-roll bar redesigned to work with new bulkheads and ball-bearing roll bar mounting system.  



Anti-Roll Bar Rear for Ball-Bearings 1.4mm
#303804

Rear anti-roll bar redesigned to work with new bulkheads and ball-bearing roll bar mounting system.  



Anti-Roll Bar Rear for Ball-Bearings 1.5mm
#303805

Rear anti-roll bar redesigned to work with new bulkheads and ball-bearing roll bar mounting system.  



Anti-Roll Bar Rear for Ball-Bearings 1.6mm
#303806

Rear anti-roll bar redesigned to work with new bulkheads and ball-bearing roll bar mounting system.  



Graphite Gear Diff Bevel & Satelitte Gears (2+4) - Lower
#304932

Gear differential internal gears precision made from new graphite composite mixture. Includes 2 bevel gears + 4 satellite gears.  



Gear Differential Outdrive Adapter - HUDY Spring Steel™ (2)
#304971

CNC-machined diff outdrive adaptor made from tough HUDY Spring Steel™. Shafts are precision ground and polished for smooth operation. 



Composite Solid Axle Driveshaft Adapters - V2 (2)
#305135

Molded-composite diff drive shaft adapters for #305184/305188 XRAY Composite Solid Axle. Modular design with composite output shafts allows for easy removal and super-easy servicing. Set of 2. 



Alu Solid Axle Driveshaft Adapters (2) - Hard Coated
#305136

CNC-machined diff drive shaft adapters for #305184/305188 XRAY Composite Solid Axle, made from premium lightweight Swiss 7075 T6 aluminum.  



Solid Axle Driveshaft Adapter - HUDY Spring Steel™ (2)
#305137

CNC-machined drive shaft adapters for #305184/305188 XRAY Composite Solid Axle, made from HUDY Spring Steel™. 



Timing Belt Pulley 38T for Multi-Diff
#305158

Molded-composite 38T pulley and side covers for #305104 XRAY Multi-Diff™ for T2’008, T2'009, T3 EU Rubber-spec Edition. The teeth number (38) is embossed into the side of the pulley for easy identification. 



ECS (ES) Drive Shaft 51mm for 2mm Pin - HUDY Spring Steel™
#305221

51mm extra-strong ECS drive shaft for 2mm pin made from world-renowned HUDY Spring Steel™.  



ECS (ES) Drive Shaft 50mm for 2mm Pin - HUDY Spring Steel™
#305223

50mm extra-strong ECS drive shaft for 2mm pin made from world-renowned HUDY Spring Steel™.  



Composite Drive Shaft Replacement Cap 3.5mm - Orange - Strong (4)
#305242

Low-friction 3.5mm drive pin clips for protecting and cushioning drive shaft pin in diff outdrives.  



ECS BB Drive Shaft Adapter - HUDY Spring Steel(2)
#305245

CNC-machined ECS BB drive shaft adapter made from HUDY Spring Steelâ„?. 



ECS BB Drive Shaft 52mm - HUDY Spring Steel (2)
#305318

52mm ECS ball-bearing drive shaft made from world-renowned HUDY Spring Steel.  



Drive Shaft 50mm - Hudy Spring Steel™
#305323

CNC-machined 50mm drive shaft for XRAY T2,T3 made from world-renowned top-secret HUDY Spring Steel™. This race-quality drive shaft is the smallest in the world, exclusively manufactured by HUDY.  



Drive Shaft 52mm - Hudy Spring Steel™
#305324

CNC-machined 52mm CVD drive shaft made from world-renowned top-secret HUDY Spring Steel™. This race-quality drive shaft is the smallest in the world, exclusively manufactured by HUDY. Drive shaft diff end has been strategically lightened to reduce rotating mass without compromising strength.  



Alu Drive Shaft Swiss 7075 T6 - Hard Coated - 52mm
#305326

Super-lightweight 52mm alu drive shaft CNC-machined from premium Swiss 7075 T6 and hardcoated for extra durability and stylish looks. New design is up to 40% lighter than steel drive shaft. 



ECS ES (Extra Strong) Drive Shaft 50mm - HUDY Spring Steel™
#305333

New extra-strong ECS drive shafts. 52mm ECS set with new reinforced drive shaft, drive shaft case, and drive axle. 



ECS ES (Extra Strong) Drive Shaft 51mm - HUDY Spring Steel™
#305334

Extra strong ECS drive shafts 51mm long for optimized steering and stability.  



Alu Wheel Hub - Offset -0.75mm (2)
#305351

CNC-machined clamping-style alu wheel hub for T2, T3 features -0.75mm offset to give more narrow track-width. Set of 2. 



Alu Wheel Hub - Offset +0.75mm (2)
#305352

CNC-machined clamping-style alu wheel hub for T2, T3 features 0.75mm offset to give wider track-width. Black color. Set of 2. 



Alu Wheel Hub - Offset +1.5mm (2)
#305353

CNC-machined clamping-style alu wheel hub for T2, T3 features 1.5mm offset to give wider track-width. Set of 2 includes clamping screws. 



Alu Wheel Shim Offset 0.75mm (2)
#305380

Alu wheel shim with 0.75mm offset. Set of 2. Fits T2, T3. 



Low Friction Kevlar Drive Belt 3x351mm
#305436

 



Composite Fixed Pulley for Layshaft w Bearings 20T - Graphite (2)
#305578-O

 



Composite Offset Spur Gear 72T / 48
#305772

XRAY precision-molded offset spur gear 72T 48P, strategically lightened to reduce rotating mass. 



Composite Offset Spur Gear 76T / 48
#305776

XRAY precision-molded offset spur gear 76T 48P, strategically lightened to reduce rotating mass. 



Offset Spur Gear 78T/48
#305778

XRAY precision molded offset spur gear 78 tooth, 48 pitch. This spur gear has been strategically lightened to reduce rotating mass. 



Composite Offset Spur Gear 79T / 48
#305779

XRAY precision-molded offset spur gear 79T 48P, strategically lightened to reduce rotating mass. 



Offset Spur Gear 81T/48
#305781

XRAY precision molded offset spur gear 81 tooth, 48 pitch. This spur gear has been strategically lightened to reduce rotating mass. 



Spur Gear 84T/48
#305784

XRAY precision molded spur gear 84 tooth, 48 pitch. This spur gear has been strategically lightened to reduce rotating mass. 



Composite Spur Gear H 84T / 48 - Orange
#305784-O

XRAY precision molded spur gear 84 tooth, 48 pitch. 



Composite Offset Spur Gear 90T / 64
#305860

XRAY precision molded offset spur gear 90 tooth, 64 pitch 



Composite Offset Spur Gear 92T / 64
#305862

XRAY presents new additions to the range of precision-molded 64-pitch offset spur gears made from special hard composite material, strategically lightened to reduce rotating mass without compromising strength or durability. 



Composite Offset Spur Gear 96T / 64
#305866

XRAY presents new additions to the range of precision-molded 64-pitch offset spur gears made from special hard composite material, strategically lightened to reduce rotating mass without compromising strength or durability. 



Composite Offset Spur Gear 96T / 64 - Orange
#305866-O

XRAY precision molded offset spur gear 96 tooth, 64 pitch. 



Composite Offset Spur Gear 99T / 64
#305869

Addition to the range of precision-molded 64-pitch offset spur gears made from special hard composite material, strategically lightened to reduce rotating mass without compromising strength or durability. 



Composite Offset Spur Gear 100T / 64
#305870

XRAY presents new additions to the range of precision-molded 64-pitch offset spur gears made from special hard composite material, strategically lightened to reduce rotating mass without compromising strength or durability. 



Composite Offset Spur Gear 100T / 64 - Orange
#305870-O

XRAY precision molded offset spur gear 100 tooth, 64 pitch. 



Offset Spur Gear 104T/64
#305874

XRAY precision molded offset spur gear 104 tooth, 64 pitch. This spur gear has been strategically lightened to reduce rotating mass. 



Offset Spur Gear 106T/64
#305876

XRAY precision molded offset spur gear 106 tooth, 64 pitch. This spur gear has been strategically lightened to reduce rotating mass. 



Offset Spur Gear 108T/64
#305878

XRAY precision molded offset spur gear 108 tooth, 64 pitch. This spur gear has been strategically lightened to reduce rotating mass. 



Composite Offset Spur Gear 110T / 64 - Orange
#305880-O

XRAY precision molded offset spur gear 110 tooth, 64 pitch. 



Offset Spur Gear 112T/64
#305882

XRAY precision molded offset spur gear 112 tooth, 64 pitch. This spur gear has been strategically lightened to reduce rotating mass. 



Offset Spur Gear 114T/64
#305884

XRAY precision molded offset spur gear 114 tooth, 64 pitch. This spur gear has been strategically lightened to reduce rotating mass. 



Narrow Pinion Gear Alu Hard Coated 12T/48
#305912

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 



Narrow Pinion Gear Alu Hard Coated 13T/48
#305913

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 



Narrow Pinion Gear Alu Hard Coated 14T/48
#305914

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 



Narrow Pinion Gear Alu Hard Coated 15T/48
#305915

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 



Narrow Pinion Gear Alu Hard Coated 16T/48
#305916

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 



Narrow Pinion Gear Alu Hard Coated 17T/48
#305917

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 



Narrow Pinion Gear Alu Hard Coated 18T/48
#305918

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 



Narrow Pinion Gear Alu Hard Coated 19T/48
#305919

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 



Narrow Pinion Gear Alu Hard Coated 20T/48
#305920

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 



Narrow Pinion Gear Alu Hard Coated 24T/48
#305924

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 



Narrow Pinion Gear Alu Hard Coated 25T/48
#305925

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 



Narrow Pinion Gear Alu Hard Coated 26T/48
#305926

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 



Narrow Pinion Gear Alu Hard Coated 27T/48
#305927

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 



Narrow Pinion Gear Alu Hard Coated 28T/48
#305928

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 



Narrow Pinion Gear Alu Hard Coated 29T/48
#305929

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 



Narrow Pinion Gear Alu Hard Coated 31T/48
#305931

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 



Narrow Pinion Gear Alu Hard Coated 32T/48
#305932

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 



Narrow Pinion Gear Alu Hard Coated 34T/48
#305934

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 



Narrow Pinion Gear Alu Hard Coated 18T/64
#305968

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 



Narrow Pinion Gear Alu Hard Coated 19T/64
#305969

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 



Narrow Pinion Gear Alu Hard Coated 20T/64
#305970

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 



Narrow Pinion Gear Alu Hard Coated 21T/64
#305971

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 



Narrow Pinion Gear Alu Hard Coated 22T/64
#305972

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 



Narrow Pinion Gear Alu Hard Coated 23T/64
#305973

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 



Narrow Pinion Gear Alu Hard Coated 24T/64
#305974

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 



Narrow Pinion Gear Alu Hard Coated 25T/64
#305975

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 



Narrow Pinion Gear Alu Hard Coated 26T/64
#305976

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 



Narrow Pinion Gear Alu Hard Coated 27T/64
#305977

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 



Narrow Pinion Gear Alu Hard Coated 29T/64
#305979

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 



Narrow Pinion Gear Alu Hard Coated 32T/64
#305982

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 



Narrow Pinion Gear Alu Hard Coated 34T/64
#305984

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 



Narrow Pinion Gear Alu Hard Coated 35T/64
#305985

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 



Narrow Pinion Gear Alu Hard Coated 46T/64
#305996

These narrow pinions are manufactured by XRAY on a specially-modified precision gear machine which has ultra-precise tolerances and assures unparalleled concentricity. After machining, the edges of pinions are chamfered and then the pinions are run in. The pinions are then specially treated to give them an even hardcoating so they stay absolutely true for a long time. v 



T4 Graphite Battery Strap for LiPo - Set
#306165

Pre-assembled Graphite Battery Strap for LiPo features the XRAY smart battery holder system and battery tweak-free mounting system. The alu capture wheel enables you to easily close and secure the battery strap without any clips. Black color. 



Alu Adjustable Battery Holder (2)
#306192-O

Alu adjustable battery holder available as spare part from set #306191. 



Alu Fully Adj. Battery Holder + Weight for Shorty Batteries
#306195

Fully adjustable battery aluminum holder & brass weights for short pack batteries.  



T4'19 Graphite + Alu Fully Adjustable Battery Holder
#306196

Fully adjustable aluminum battery holder allows to move the batteries in all directions - front/rear and also left/right. The adjustable battery holder allows for easy and comfortable weight transfer adjustment.  



T4'19 Graphite + Brass Fully Adjustable Battery Holder
#306198

Fully adjustable brass battery holder allows to move the batteries in all directions - front/rear and also left/right. The adjustable battery holder allows for easy and comfortable weight transfer adjustment.  



Graphite Holder For Adj. Battery Holder For Narrow Batteries (2)
#306199

CNC-machined battery backstop for the adjustable battery holder for positioning batteries fore-aft/left-right. 



Alu Forward Servo Mount - Black
#306205

 



Graphite Floating Forward Servo Holder 3.0mm
#306235

 



Alu Universal Mount
#306410

Universal mount designed specifically for the T4 platform accommodates popular fan sizes including 30mm and 40mm fans but also can be used as a battery backstop on T4’20. 



XRAY Pure Tungsten Chassis Weight 12g
#306551

 



Titan Suspension Pivot Pin (2)
#307217

Titanium lower inner pivot pins, ultra-precision hand ground for high durability and long life.  



Titan Front Arm Pivot Pin (2)
#307222

Titanium front lower outer pivot pins, ultra-precision hand ground for high durability and long life.  



Titan Rear Arm Pivot Pin (2)
#307322

Titanium rear lower outer pivot pins, ultra-precision hand ground for high durability and long life.  



ULP Alu Progressive Shock System - Set (2)
#308029

Innovative progressive shock system for ULP touring car shocks for improved traction and steering characteristics.  



Alu Shock Spring Retaining Collar (4)
#308031

Aluminum CNC-machined shock collars that can be used on the XRAY shock absorbers to increase the durability. Stylish and lightweight collars are CNC-machined from premium Swiss 7075 T6 aluminum and are strategically lightened. 



Alu XRAY Shock Spring Retaining Collar - Black (4)
#308031-K

Aluminum shock collars for use on XRAY shock absorbers to increase durability.  



Alu XRAY Shock Spring Retaining Collar - Orange (4)
#308031-O

Aluminum CNC-machined shock collars that can be used on the XRAY shock absorbers to increase the durability. Stylish and lightweight collars are CNC-machined from premium Swiss 7075 T6 aluminum and are strategically lightened. Set of four. Orange color. 



Composite Progressive Pistons (4)
#308038

Set of the composite molded pistons designed and produced to accommodate progressive shock system for touring cars. 



Alu Progressive Shock System - Set (2)
#308039

Innovative progressive shock system for touring cars for improved traction and steering characteristics. 



T4 Alu Shock Adjustable Nut - Orange (2)
#308042-O

Alu spring-tension adjusting nut. Set of two. Orange colour. 



ULP Alu Shock Adjustable Nut V2 - Orange (2)
#308044-O

Alu spring-tension adjusting nut for ULP shock absorbers. 



T4 Shock Foam Insert (4)
#308092

Foam inserts for XRAY shocks, go between shock upper mount and rubber membrane. All-new low-profile shock foam inserts allow for easier shock rebound adjustment. 



XRAY 4S Spring Set Progressive C=2.3-2.6 (2)
#308263

The all-new 4S progressive springs marked 2.3–2.6. 4S springs have been specifically designed to complement the SLP shocks and are 20mm long. Set of 2. 



XRAY 4S Spring-Set C=2.3 (2)
#308274

The all-new linear 4S springs marked 2.3. 4S springs have been specifically designed to complement the SLP shocks and are 20mm long. Set of 2. 



XRAY 4S Spring-Set C=2.5 (2)
#308275

The all-new linear 4S springs marked 2.5. 4S springs have been specifically designed to complement the SLP shocks and are 20mm long. Set of 2. 



XRAY 4S Spring-Set C=2.7 (2)
#308276

The all-new linear 4S springs marked 2.7. 4S springs have been specifically designed to complement the SLP shocks and are 20mm long. Set of 2. 



XRAY 4S Spring-Set C=2.9 (2)
#308277

The all-new linear 4S springs marked 2.9. 4S springs have been specifically designed to complement the SLP shocks and are 20mm long. Set of 2. 



XRAY 4S Spring Set C=2.8 (2)
#308288

Linear 4S springs marked 2.8. The 4S springs have been specifically designed to complement the SLP shocks and are 20mm long. Set of 2.
 



XRAY 4S Spring Set C=3.0 (2)
#308290

Linear 4S springs marked 3.0. 4S springs have been specifically designed to complement the SLP shocks and are 20mm long. Set of 2. 



1/10 Touring Alu Shock Absorber - Set - Black (2)
#308307-K

The aluminum shock absorbers specially developed to lower the CG of the car to improve stability. 



T4 Alu Shock Absorber - Set - Orange (2)
#308307-O

The all-new T4 aluminum shock absorbers are specially developed to lower the CG of the car to the absolute maximum in order to improve stability. 



ULP Alu Shock Absorber - Set - Orange (2)
#308308-O

ULP shocks developed to lower the CG of the car even more to the absolute lowest to further improve stability.  



T4 Alu Shock Body (2)
#308323

Machined hardcoated alu shock bodies for #308307 T4 Alu Shock Absorber - Set. Set of 2.  



Alu Cap For XRAY Shock Body #308322 - Orange
#308327-O

CNC-machined aluminum shock lower cap for #308322 shock body. Set of two. Orange color. 



T4 Composite Shock Parts
#308333

One frame containing composite parts (except pistons) for two T4 SLP aluminum shock absorbers. 



T4 Alu Shock Cap Nut with Vent Hole - Orange (2)
#308353-O

Machined alu upper shock cap for T4 SLP aluminum shock absorbers. Orange colour. Set of 2. 



ULP Alu Shock Cap Nut with Vent Hole - Orange (2)
#308354-O

Machined alu upper shock cap for T4 ULP aluminum shock absorbers. Orange color. Set of 2. 



Set of Ceramic Ball-Bearings (14)
#309002

Set of 14 high-performance ceramic ball-bearings for XRAY touring cars. Set of 5x10x4 bearings (10pcs) and 10x15x4 bearings (4pcs). 



Tires XXT-M W/O Belt for Low Grip Asphalt (2)
#309612

Rubber tires specially developed for low-grip asphalt. Fits most popular sizes of wheels and inserts. Set of 2.  



Tires XXT-M for Asphalt (2)
#309617

Rubber tires specially developed for medium & high-grip asphalt. Fits most popular sizes of wheels and inserts. Set of 2. 



Precision Balancing Chassis Weights (4 pcs.)
#309840

A complete set of 4 chassis balancing weights (2x 5g + 2x 10g) and mounting hardware. Designed for XRAY electric & nitro touring car to be mounted at pre-drilled chassis holes; also fits other race cars as well. Made from steel and laser engraved with the weight value for easy identification. 



Short Lipo Balancing Chassis Weight 40g (2)
#309861

CNC-machined 40g chassis weights made from brass material and additionally black coated for astonishing look.  



XRAY Stainless Steel Weight For Narrow Battery Pack 35g
#309862

Specially-designed 35g stainless steel weight for placement under slim battery pack to add weight as low as possible.  



XRAY Aluminum 1/10 Touring Set-Up Board - Limited Edition
#309901

Unique flat set-up board for 1/10 electric & nitro touring cars with stylish, full-colour XRAY graphics screen printed with your name and country flag.  



Stainless Steel Battery Weight 35g
#326181

Specially-designed 35g stainless steel weight for placement beneath short battery pack to add weight as low as possible. 



Alu Rear Wing Shim (2)
#353561

Alu rear wing shim for XB and XT series buggies and truggies. Provides additional support to prevent wing from pulling off from mounting screws. Set of 2. 



Ball End 4.9mm With Thread 6mm (2)
#362650

Threaded 4.9mm ball end with 6mm thread length for connection to molded ball joints. Set of 2. 



XRAY T4 Sticker for Body - White
#397326

Set of black & white transparent XRAY T4 stickers fits any 1/10th scale body, or looks great on your tool box as well. 



Hex Screw SB M3x10 (10)
#901310

M3x10 setscrew, hex drive. Set of 10 pieces. 



Ball-Bearing 1.5x4x2 Steel Sealed - Oil (4)
#930154

High-quality ball-bearings ID x OD x thickness (mm) = 1.5x4x2mm 



Ball-Bearing 5x8x2.5 Steel Sealed - Oil (2)
#930508

High-quality ball-bearings ID x OD x thickness (mm) = 5x8x2.5mm. Set of 2 pieces. 



Ball-Bearing 10x15x4 Rubber Sealed - Grease (2)
#941014

High-speed ball-bearings manufactured specially for XRAY. ID x OD x thickness (mm) = 10x15x4.  



Alu Nut M3 (10)
#960031

M3 alu locking nuts. Set of 10. 



E-Clip 1.2 (10)
#965012

1.2mm dia. E-clip. Set of 10 pieces. 



O-Ring 10x1.5 (10)
#970100

Rubber O-ring 1.5mm thick x 10mm dia. Set of 10 pieces. 



Pin 1.5x7.3 (10)
#980157

Polished chrome pin. Dia. x length = 1.5mm x 7.3 mm. Set of 10 pieces. 



ID Product Name Released
302384-G Composite C-Hub for Body Upstop Left - 4° Deg. - Graphite Oct. 13, 2020
930154 Ball-Bearing 1.5x4x2 Steel Sealed - Oil (4) May 22, 2020
965012 E-Clip 1.2 (10) May 22, 2020
980157 Pin 1.5x7.3 (10) May 22, 2020
305245 ECS BB Drive Shaft Adapter - HUDY Spring Steel(2) May 21, 2020
305318 ECS BB Drive Shaft 52mm - HUDY Spring Steel (2) May 21, 2020
306410 Alu Universal Mount Apr. 21, 2020
301962 T4'20 Graphite Shock Tower Front 3.0mm - SLP Mar. 30, 2020
302962 T4'20 Graphite Shock Tower Rear 3.0mm - SLP Mar. 30, 2020
309862 XRAY Stainless Steel Weight For Narrow Battery Pack 35g Mar. 30, 2020
302350 T4'20 Alu C-Hub for ARS - 0° Deg. Mar. 12, 2020
302351 T4'20 Alu C-Hub for ARS Right - 2° Deg. Mar. 12, 2020
302352 T4'20 Alu C-Hub for ARS Left - 2° Deg. Mar. 12, 2020
302353 T4'20 Alu C-Hub for ARS Right - 4° Deg. Mar. 12, 2020
302354 T4'20 Alu C-Hub for ARS Left - 4° Deg. Mar. 12, 2020
300902 T4'20 ARS - Active Rear Suspension Set Mar. 10, 2020
306199 Graphite Holder For Adj. Battery Holder For Narrow Batteries (2) Mar. 09, 2020
306551 XRAY Pure Tungsten Chassis Weight 12g Feb. 03, 2020
301961 T4'20 ULP Graphite Shock Tower Front 3.0mm - Low Jan. 28, 2020
302961 T4'20 ULP Graphite Shock Tower Rear 3.0mm - Low Jan. 28, 2020