xrayxrayHome XRAY homeXRAY X-shopXRAY X-forumRCAmerica
supportsearchcontactguestbooksite map
newsproductsaboutusworldwide headlines
click to enable quick search
 
Alu Shim 3x6x1.0mm (10)
#303122

Alu shims 3x6mm size, 1mm thick. Silver color, set of 10. 



Alu Shim 3x6x1.0mm - Black (10)
#303122-K

Alu shims 3x6mm size, 1mm thick. Black color, set of 10. 



Alu Shim 3x6x1.0mm - Orange (10)
#303122-O

Alu shims 3x6mm size, 1mm thick. Orange color, set of 10. 



Alu Shim 3x6x2.0mm (10)
#303123

Alu shims 3x6mm size, 2mm thick. Silver color, set of 10. 



Alu Shim 3x6x2.0mm - Black (10)
#303123-K

Alu shims 3x6mm size, 2mm thick. Black color, set of 10. 



Alu Shim 3x6x2.0mm - Orange (10)
#303123-O

Alu shims 3x6mm size, 2mm thick. Orange color, set of 10. 



Alu Shim 3x6x3.0mm (10)
#303125

Alu shims 3x6mm size, 3mm thick. Set of 10. 



Alu Shim 3x6x3.0mm - Black (10)
#303125-K

Alu shims 3x6mm size, 3mm thick. Black color. Set of 10. 



Alu Shim 3x6x3.0mm - Orange (10)
#303125-O

Alu shims 3x6mm size, 3mm thick. Orange color. Set of 10. 



Alu Shim 3x6x5.0mm (10)
#303126

Alu shims 3x6mm size, 5mm thick. Set of 10. 



Alu Shim 3x6x5.0mm - Black (10)
#303126-K

Alu shims 3x6mm size, 5mm thick. Black color, set of 10. 



Alu Shim 3x6x4.0mm (10)
#303127

Alu shims 3x6mm size, 4mm thick. Set of 10. 



Alu Shim 3x6x4.0mm - Black (10)
#303127-K

Alu shims 3x6mm size, 4mm thick. Black color, set of 10. 



Alu Shim 3x6x6.0mm - Black (10)
#303128-K

Alu shims 3x6mm size, 6mm thick. Black color, set of 10. 



Composite Set of Shims 3x 3x6x1mm, 1x 3x6x2mm (2)
#303129

Molded composite set of wheelbase shims, includes 3x6x2mm shims (qty 2), and 3x6x1mm shims (qty 6). 



Alu Anti-Roll Bar Pivot ball 5.8mm - Hard Coated (2)
#333451

CNC-machined 5.8mm dia ball joint for anti-roll bar, made from premium lightweight 7075 T6 aluminum. Set of 2. 



Receiver Switch - Set
#336060

Complete receiver switch set for NT1 fits directly into composite receiver case. Pre wired mechanical on/off switch for quick & easy powering/shutdown of onboard electronics. Molded rubber cover protects switch from contamination by fuel and dirt. Comes with Futaba J connectors. 



Composite 2-Speed Gear 48T (1st)
#345548

XRAY precision-molded 48T spur gear (1st gear) made from special composite material with optimal balance of hardness, toughness, and flexibility. Gives long life, minimal wear, and minimizing breakage and teeth stripping. Strategically lightened to reduce rotating mass. 



Composite 2-Speed Gear 50T (1st)
#345550

XRAY precision-molded 50T spur gear (1st gear) made from special composite material with optimal balance of hardness, toughness, and flexibility. Gives long life, minimal wear, and minimizing breakage and teeth stripping. Strategically lightened to reduce rotating mass. 



Graphite 2-Speed Gear 48T (1st)
#345648

XRAY precision-molded spur gear (1st gear). 



Graphite 2-Speed Gear 49T (1st)
#345649

XRAY precision-molded spur gear (1st gear). 



Graphite 2-Speed Gear 50T (1st)
#345650

XRAY precision-molded spur gear (1st gear). 



XB8 Chassis Side Guards L+R
#351159

All-new redesigned side guards incorporate a larger bottom radius to make the car more stable on rough tracks, and increase the car???s longitudinal flex. 



Composite Chassis Side Guard L+R - Soft
#351159-S

The composite side guards protect the car, muffler, and fuel tank from side impacts. The side guards perfectly fit the chassis and seal against dirt. Molded from SOFT composite mixture for increased flex to generate more traction.
 



GT Foam Bumper - Light
#351222

Lightweight version of GTX8 front bumper.  



XB8 Graphite Upper Plate
#351348

Graphite front plate is CNC-machined from high-grade carbon graphite, ensuring highest strength with lightest weight.  



XB8 C-Hub Composite Front Lower Suspension Arm - Medium
#352121

Front lower suspension arm for C-hub suspension molded from medium hardness composite mixture. 



XB8 C-Hub Composite Front Lower Suspension Arm - Graphite
#352121-G

Front lower suspension arm for C-hub suspension molded from specially-formulated graphite composite material.  



XB8 C-Hub Composite Front Lower Suspens. Arm - Short - Soft
#352121-S

Front lower suspension arm for C-hub suspension molded from soft hardness composite mixture, super-tough, high-tech composite material. 



Steel Eccentric Bushing 0 (2)
#352170

Eccentric bushing for I.A.C. (Integrated Adjustable Caster). 0 setting identified by no dot. Made from famous Hudy Spring Steel. Set of 2.  



Steel Eccentric Bushing 1 - V2 (2)
#352174

Eccentric bushing for I.A.C. (Integrated Adjustable Caster). 1 setting (identified by 1 dot) allows for either +1 or -1 caster adjustment depending on the orientation of the bushing. 



Steel Eccentric Bushing 2 - V2 (2)
#352175

Eccentric bushing for I.A.C. (Integrated Adjustable Caster). 2 setting (identified by 2 dots) allows for either +2 or -2 caster adjustment depending on the orientation of the bushing. 



Ball Mount (2)
#352180

Pivoting ball mount for I.A.C. (Integrated Adjustable Caster). Works in conjunction with eccentric front bushings to create various caster settings in front suspension using the same C-hub block. Set of 2. 



Alu Caster Block 2° Right - Swiss 7075 T6
#352275

 



Alu Caster Block 16 Right - Swiss 7075 T6
#352276

Authentic XRAY RIGHT-side 16 alu caster block is CNC-machined from premium Swiss 7075 T6 aluminum.  



Alu Caster Block 2° Left - Swiss 7075 T6
#352285

 



Alu Caster Block 16° Left - Swiss 7075 T6
#352286

Authentic XRAY LEFT-side 16° alu caster block is CNC-machined from premium Swiss 7075 T6 aluminum.  



GT Alu Shock Plate - Swiss 7075 T6 (L+R)
#352390

The machined aluminum shock plate extensions for GT platform can be used on both front and rear suspension arms. 



XB8 Front Anti-Roll Bar 1.6mm
#352487

Front anti-roll bar for XB8, XT8 & GTX8 cars, 1.6mm thick.  



XB8 Front Anti-Roll Bar 1.8mm
#352489

Front anti-roll bar for XB8, XT8 & GTX8 cars, 1.8mm thick.  



XB8 Front Anti-Roll Bar 2.0mm
#352490

Front anti-roll bar for XB8, XT8 & GTX8 cars, 2.0mm thick.  



XB8 Front Anti-Roll Bar 2.2mm
#352492

Front anti-roll bar for XB8, 2.2mm thick. Laser-engraved for easy identification. 



XB8 Front Anti-Roll Bar 2.3mm
#352493

Front anti-roll bar for XB8, 2.3mm thick. Laser-engraved for easy identification.
 



XB8 Front Anti-Roll Bar 2.4mm
#352494

Front anti-roll bar for XB8, 2.4mm thick. Laser-engraved for easy identification. 



XB8 Front Anti-Roll Bar 2.5mm
#352495

Front anti-roll bar for XB8, 2.5mm thick. Laser-engraved for easy identification. 



XB8 Front Anti-Roll Bar 2.6mm
#352496

Front anti-roll bar for XB8, 2.6mm thick. Laser-engraved for easy identification. 



XB8 Composite Servo Saver Upper Arm - Graphite
#352514

Molded composite parts for XB8 servo saver.  



XB9 Composite Rear Lower Suspension Arm
#353115

Rear lower suspension arm for XB9 made from super-tough high-tech composite material. Smart, universal design allows the same front arm to be used on both left and right sides. 



XB9 Composite Rear Lower Suspension Arm - Hard
#353116

All-new hard XB9 suspension arm moulded from a new blend of XRAY's proprietary composite material.  



Composite Rear Lower Suspension Arm - Graphite
#353116-G

Molded lightweight composite rear lower suspension arm made from specially-formulated graphite composite material.  



XB8 Graphite Rear Lower Arm Plate 1.6mm (2)
#353191

Optional graphite rear lower arm plate allows for stiffer the arms and makes the car more stable and easier to drive under high-grip conditions. 



XB8 Composite Rear Mud Protector (L+R)
#353193

Lightweight composite mud guard for rear suspension arms protects the rear drivetrain in wet & dirty track conditions. Set of L+R. 



XB8 Graphite Braces for Chassis Side Guards - Set
#353250

Chassis side guard brace CNC-machined from high-grade graphite material.  



Graphite Insert for Short Rear Composite Brace - Set
#353281

Reinforcement braces for rear composite brace, stiffen the composite brace and chassis for high-traction tracks. 



Alu Rear Lower Suspension Holder +2mm - Rear (7mm) - 7075 T6
#353321

With this suspension holder, the roll center is moved by +2mm to allow for super fine roll-center adjustment.  



XB8 Composite Rear Upright LB - Graphite
#353354-G

Lightweight yet ultra-strong rear upright molded from special graphite composite material.  



Alu Shim 4x7.5x1mm (4)
#353380

Alu shims 4x7.5mm size, 1mm thick. Black color, set of 4. 



Alu Shim 4x7.5x2mm (4)
#353381

Alu shims 4x7.5mm size, 2mm thick. Black color, set of 4. 



Rear Anti-Roll Bar 1.8mm
#353418

Rear anti-roll bar for XB8, XT8 & GTX8 cars, 1.8mm thick. 



Rear Anti-Roll Bar 2.0mm
#353420

Rear anti-roll bar for XB8, XT8 & GTX8 cars, 2.0mm thick. 



Rear Anti-Roll Bar 2.2mm
#353422

Rear anti-roll bar 2.2mm thick. 



Rear Anti-Roll Bar 2.4mm
#353424

Rear anti-roll bar 2.4mm thick. 



Rear Anti-Roll Bar 2.5mm
#353425

Rear anti-roll bar for XB8 & XT8, 2.5mm thick. Laser-engraved for easy identification.
 



Rear Anti-Roll Bar 2.6mm
#353426

Rear anti-roll bar 2.6mm thick. 



Rear Anti-Roll Bar 2.8mm
#353428

Rear anti-roll bar 2.8mm thick. 



Rear Anti-Roll Bar 3.2mm
#353432

Rear anti-roll bar 3.2mm thick. 



Alu Rear Wing Shim (2)
#353561

Alu rear wing shim for XB and XT series buggies and truggies. Provides additional support to prevent wing from pulling off from mounting screws. Set of 2. 



Composite Rear Wing Shim - Black (2)
#353565

Molded composite rear wing shim for XB and XT series buggies and truggies. Provides additional support to prevent wing from pulling off of mounting screws. Black colour, set of 2. 



Composite Center Diff.Mounting Plate Set - Higher - Graphite
#354011-G

Composite center diff mounting plate set - higher made from specially-formulated graphite composite mixture  



Differential Case - V2 - Graphite
#355022-G

Rubber-sealed differential case made from new specially-formulated graphite composite material. Lighter, tougher material with higher temperature and wear resistance, also holds the screws better secured in place. 



Front/Rear Differential Large Bevel Gear 44T
#355044

44-tooth large external bevel gear manufactured from HUDY Steel for drive ratio adjustment.  



Front/Rear Differential Large Bevel Gear 45T
#355045

45-tooth large external bevel gear manufactured from HUDY Steel for drive ratio adjustment.  



Extreme Heat Resistant F/R Alu Diff Pin with Inserts (2+4)
#355086

Precision-ground polished alu pin 3.5 x 26.6 mm for internal satellite gears used in large front & rear differentials #355004 and #355005. 



Bevel Drive Gear 14T
#355114

14-tooth bevel drive gear for front/rear differential. Precision machined on a special gear machine. Fits XB8. 



Active Differential Spur Gear 46T
#355146

The 46T diff bevel gear for XRAY Active Diff™ is machined from special HUDY steel material which has been specially developed for gear-type products, additionally hardened and precision ground to fit the tightest tolerance requirements for perfect fit with the diff outdrives.  



Active Diff. Outdrive Adapter - Lightweight - HSS (2)
#355163

Lightweight CNC-machined diff outdrive adapters for XB8 Active Diff. 



Alu CVD Drive Axle - Hardcoated (4)
#355212

CNC-machined CVD drive axle made from premium lightweight Swiss 7075 T6 hardcoated aluminum. 



CVD Adjustable Drive Axle - HUDY Spring Steel™ (2)
#355215

Drive axle for XRAY adjustable drive shafts. Drive shaft length adjustment uses 4 different connecting hole positions at the drive axle end to allow changes to overall driveshaft length.  



Alu Wheel Axle Offset +1mm - Hard Coated
#355251

Hardcoated aluminum wheel axle with +1mm offset. Using these wheel axles will increase the overall track width by 2mm, making the car more stable and easier to drive.  



Wheel Nut With Cover - Hard Coated (2)
#355265

Hardcoated aluminum wheel nut with cover for XB8 wheels. Using these wheel nuts, you will never have problems anymore with dirt getting into the wheel axle assembly! Fits front and rear wheel axles.  



Pin with Flat Spot 3x16.8 (2)
#355292

Polished chrome pin with flat spot, 3.0 x 16.8mm. Specially hand-ground for maximum precision. Set of 2. 



Steel Pinion Gear 12T
#355712

High-performance 12T pinion gear, manufactured from special steel for toughness and durability. 



Steel Pinion Gear 13T
#355713

High-performance 13 tooth pinion gear, manufactured from special steel for toughness and durability with precise tolerances and assures unparalleled concentricity. Precision-cut teeth with chamfered edges. Run-in for smooth operation. Includes M4x4 set screw. 



Steel Pinion Gear 14T
#355714

High-performance 14 tooth pinion gear, manufactured from special steel for toughness and durability with precise tolerances and assures unparalleled concentricity. Precision-cut teeth with chamfered edges. Run-in for smooth operation. Includes M4x4 set screw. 



Steel Pinion Gear 15T
#355715

High-performance 15 tooth pinion gear, manufactured from special steel for toughness and durability with precise tolerances and assures unparalleled concentricity. Precision-cut teeth with chamfered edges. Run-in for smooth operation. Includes M4x4 set screw. 



Steel Pinion Gear 16T
#355716

High-performance 16 tooth pinion gear, manufactured from special steel for toughness and durability with precise tolerances and assures unparalleled concentricity. Precision-cut teeth with chamfered edges. Run-in for smooth operation. Includes M4x4 set screw. 



Steel Pinion Gear 17T
#355717

High-performance 17 tooth pinion gear, manufactured from special steel for toughness and durability with precise tolerances and assures unparalleled concentricity. Precision-cut teeth with chamfered edges. Run-in for smooth operation. Includes M4x4 set screw. 



Alu Pinion Gear - Hard Coated 19T
#355819

High-strength pinion gear made from tough 7075 T6 aluminum and specially hardcoated for superior strength, light weight, and high durability. 



Alu Pinion Gear - Hard Coated 20T
#355820

High-strength pinion gear made from tough 7075 T6 aluminum and specially hardcoated for superior strength, light weight, and high durability. 



Alu Pinion Gear - Hard Coated 21T
#355821

High-strength pinion gear made from tough 7075 T6 aluminum and specially hardcoated for superior strength, light weight, and high durability. 



Alu Pinion Gear - Hard Coated 22T
#355822

High-strength pinion gear made from tough 7075 T6 aluminum and specially hardcoated for superior strength, light weight, and high durability. 



Alu Pinion Gear - Hard Coated 23T
#355823

High-strength pinion gear made from tough 7075 T6 aluminum and specially hardcoated for superior strength, light weight, and high durability. 



Alu Pinion Gear - Hard Coated 24T
#355824

High-strength pinion gear made from tough 7075 T6 aluminum and specially hardcoated for superior strength, light weight, and high durability. 



Self-Adhesive Rubber 1.5x13x51.5mm (2)
#356161

Set of two replacement self-adhesive rubbers. These rubber straps are used to prevent the battery from moving. 



2-Way Flow Delrin Shock Piston 5-H.(1.5)+2-H.(1.0) (2)
#358027

Set of composite molded shock pistons for two shock absorbers with five 1.5mm holes & two 1.0mm holes.  



2-Way Flow Delrin Shock Piston 6-H.(1.3)+2-H.(1.1) (2)
#358028

Set of composite molded shock pistons for two shock absorbers with six 1.3mm holes & two 1.1mm holes. 



2-Way Flow Delrin Shock Piston 6-H.(1.4)+2-H.(1.1) (2)
#358029

Set of composite molded shock pistons for two shock absorbers with six 1.4mm holes & two 1.1mm holes. 



2-Way Flow Delrin Shock Piston 8-H.(1.2)+2-H.(1.2) (2)
#358030

Set of composite molded shock pistons for two shock absorbers with eight 1.2mm holes & two 1.2mm holes. 



2-Way Flow Delrin Shock Piston 8-H.(1.3)+2-H.(1.2) (2)
#358031

Set of composite molded shock pistons for two shock absorbers with eight 1.3mm holes & two 1.2mm holes.  



XB8 Alu Shock Cap Nut - Black Coated (2)
#358053

CNC-machined 1-piece alu shock cap for XB8, made from premium lightweight 7075 T6 aluminum. Black coated. Set of 2.  



XB8 Alu Shock Cap Nut with Vent Hole - Black Coated (2)
#358054

CNC-machined 1-piece alu shock cap for XB8, made from premium lightweight 7075 T6 aluminum. Features a small vent hole that makes shock assembly very predictable and easy, allowing excess shock oil to easily escape. Machined interior ridges ensure proper placement and sealing of the super-soft silicone membrane.  



Shock Rubber Membrane (4)
#358082

Shock membrane for shock absorbers, made of soft molded rubber. The new shock membranes are now wider to fit the new big-bore shocks.  



Shock Rubber Membrane Ribbed (4)
#358083

Newly designed improved shock membranes provide more consistent feel during long finals with no sign of fade. Shock membrane for shock absorbers, made of soft molded rubber. The new shock membranes are wider to fit the big-bore shocks. The material has been also improved to guarantee the same damping characteristics from the beginning of the race to the end even after excessive loads. Set of 4. 



XB8 Shock Rubber Membrane Bottom Ribbed (4)
#358084

Shock membrane for XB8 shocks, made from soft molded rubber. Features internal bottom ribs to maintain shape. The specially-formulated rubber material of the shock membrane ensures equal damping characteristics from the beginning of the race to the end, even after extreme operation. Set of 4. Fits XB8. 



XB8 Shock Rubber Membrane Bottom Ribbed - Soft (4)
#358084-S

Shock membrane for XB8 shocks, molded from softer transparent rubber. 



XB8 Shock Rubber Valve (4)
#358085

Rubber valve for 2-way flow in shock pistons. Suitable for shocks in XB8, XT8, and GTX. 



XB8 Shock Rubber Membrane Cell - Medium (4)
#358087-M

Shock membrane for XB8 shocks, made from medium molded rubber. The cell shock membranes have less air gap that helps to generate more grip of the car.  



Shock Foam Insert (4)
#358090

Foam inserts for XRAY shocks, go between shock upper mount and rubber membrane. Prevents membrane collapse. Provides slightly more steering, and more stability when landing from big jumps.  



GT Shock Shaft (2)
#358163

Thick, robust 3.5mm rear shock shaft, precisely machined from special high-tensile steel and hand-ground for a super-smooth finish to ensure smooth movement in the shock body.  



GT Body with Wing for 1/8 On-Road GT
#359730

XRAY’s self-designed GTX8 body – made from high-quality Lexan™ material – features high-downforce areas: front windscreen for proper airflow, and side downforce areas for higher stability.  



Connecting Cable Receiver/Batt. Pack
#389135

Connection cable for plugging receiver battery pack into the receiver. Standard Futaba J connector on receiver end, micro battery connector on the battery end. 



Ball-Bearing 8x14x4 Steel Sealed - Oil (2)
#930815

High-quality ball-bearings ID x OD x thickness (mm) = 8x14x4mm. Set of 2 pieces. 



Ball-Bearing 8x16x5 Steel Sealed - Oil (2)
#930817

New high-speed ball-bearings manufactured specially for XRAY 



Ball-Bearing 13x19x4 Steel Sealed - Grease (2)
#931318

New high-speed ball-bearings manufactured specially for XRAY 



Ball-Bearing 13x19x4 Steel Sealed - Oil (2)
#931319

New high-speed ball-bearings manufactured specially for XRAY 



Ball-Bearing 8x14x4 Rubber Sealed - Grease (2)
#940814

New high-speed ball-bearings manufactured specially for XRAY. ID x OD x thickness (mm) = 8x14x4. Set of 2 pieces. 

Replaced by Ball-Bearing 8x14x4 Rubber Sealed - Grease (2) 



Ball-Bearing 8x16x5 Rubber Sealed - Grease (2)
#940816

New high-speed ball-bearings manufactured specially for XRAY. ID x OD x thickness (mm) = 8x16x5. Set of 2 pieces. 



Ball-Bearing 13x19x4 Rubber Sealed - Grease (2)
#941318

High-speed ball-bearings for XB8’18 and XB8E’18 manufactured specially for XRAY. ID x OD x thickness (mm) = 13x19x4. Set of 2. 



Ball-Bearing 13x19x4 Rubber & Steel Sealed - Grease (2)
#941320

New high-speed ball-bearings manufactured specially for XRAY XB808. Sealed with rubber seal from one side and with steel seal from other side. ID x OD x thickness (mm) = 13x19x4. Set of 2 pieces. 



Alu Nut M3 (10)
#960031

M3 alu locking nuts. Set of 10. 



Washer S 4x8x0.5 (10)
#962041

Flat washer. ID x OD x thickness = 4mm x 8mm x 0.5mm. Set of 10 pieces. 



Washer S 6x18x0.3 (10)
#964061

Flat washer. ID x OD x thickness = 6mm x 18mm x 0.3mm. Set of 10. 



Washer S 6x18x0.5 (10)
#964062

Flat washer. ID x OD x thickness = 6mm x 18mm x 0.5mm. Set of 10. 



Washer S 6x10x0.2 (10)
#964063

Flat washer. ID x OD x thickness = 6mm x 10mm x 0.2mm. Set of 10. 



Washer S 6x10x0.3 (10)
#964064

Flat washer. ID x OD x thickness = 6mm x 10mm x 0.3mm. Set of 10. 



ID Product Name Released
303126 Alu Shim 3x6x5.0mm (10) Sep. 29, 2020
303127 Alu Shim 3x6x4.0mm (10) Aug. 20, 2020
930815 Ball-Bearing 8x14x4 Steel Sealed - Oil (2) May 22, 2020
354011-G Composite Center Diff.Mounting Plate Set - Higher - Graphite Apr. 14, 2020
352390 GT Alu Shock Plate - Swiss 7075 T6 (L+R) Feb. 26, 2020
352275 Alu Caster Block 2° Right - Swiss 7075 T6 Feb. 01, 2020
352285 Alu Caster Block 2° Left - Swiss 7075 T6 Feb. 01, 2020
930817 Ball-Bearing 8x16x5 Steel Sealed - Oil (2) Jan. 23, 2020
931318 Ball-Bearing 13x19x4 Steel Sealed - Grease (2) Jan. 23, 2020
931319 Ball-Bearing 13x19x4 Steel Sealed - Oil (2) Jan. 23, 2020
352170 Steel Eccentric Bushing 0 (2) Aug. 01, 2019
352174 Steel Eccentric Bushing 1 - V2 (2) Aug. 01, 2019
352175 Steel Eccentric Bushing 2 - V2 (2) Aug. 01, 2019
352121-S XB8 C-Hub Composite Front Lower Suspens. Arm - Short - Soft Jun. 27, 2019
352121-G XB8 C-Hub Composite Front Lower Suspension Arm - Graphite May 07, 2019
352121 XB8 C-Hub Composite Front Lower Suspension Arm - Medium Apr. 26, 2019
353354-G XB8 Composite Rear Upright LB - Graphite Apr. 24, 2019
355086 Extreme Heat Resistant F/R Alu Diff Pin with Inserts (2+4) Mar. 25, 2019
358087-M XB8 Shock Rubber Membrane Cell - Medium (4) Feb. 21, 2019
355215 CVD Adjustable Drive Axle - HUDY Spring Steel™ (2) Dec. 06, 2018