Alu shims 3x6mm size, 1mm thick. Silver color, set of 10. 

Alu shims 3x6mm size, 1mm thick. Black color, set of 10. 

Alu shims 3x6mm size, 1mm thick. Orange color, set of 10. 

Alu shims 3x6mm size, 2mm thick. Silver color, set of 10. 

Alu shims 3x6mm size, 2mm thick. Black color, set of 10. 

Alu shims 3x6mm size, 2mm thick. Orange color, set of 10. 

Alu shims 3x6mm size, 3mm thick. Set of 10. 

Alu shims 3x6mm size, 3mm thick. Black color. Set of 10. 

Alu shims 3x6mm size, 3mm thick. Orange color. Set of 10. 

Alu shims 3x6mm size, 5mm thick. Set of 10. 

Alu shims 3x6mm size, 5mm thick. Black color, set of 10. 

Alu shims 3x6mm size, 4mm thick. Set of 10. 

Alu shims 3x6mm size, 4mm thick. Black color, set of 10. 

Alu shims 3x6mm size, 6mm thick. Black color, set of 10. 

Molded composite set of wheelbase shims, includes 3x6x2mm shims (qty 2), and 3x6x1mm shims (qty 6). 

CNC-machined 5.8mm dia ball joint for anti-roll bar, made from premium lightweight 7075 T6 aluminum. Set of 2. 

Complete receiver switch set for NT1 fits directly into composite receiver case. Pre wired mechanical on/off switch for quick & easy powering/shutdown of onboard electronics. Molded rubber cover protects switch from contamination by fuel and dirt. Comes with Futaba J connectors. 

XRAY precision-molded 48T spur gear (1st gear) made from special composite material with optimal balance of hardness, toughness, and flexibility. Gives long life, minimal wear, and minimizing breakage and teeth stripping. Strategically lightened to reduce rotating mass. 

XRAY precision-molded 50T spur gear (1st gear) made from special composite material with optimal balance of hardness, toughness, and flexibility. Gives long life, minimal wear, and minimizing breakage and teeth stripping. Strategically lightened to reduce rotating mass. 

XRAY precision-molded spur gear (1st gear). 

XRAY precision-molded spur gear (1st gear). 

XRAY precision-molded spur gear (1st gear). 

All-new redesigned side guards incorporate a larger bottom radius to make the car more stable on rough tracks, and increase the car???s longitudinal flex. 

The composite side guards protect the car, muffler, and fuel tank from side impacts. The side guards perfectly fit the chassis and seal against dirt. Molded from SOFT composite mixture for increased flex to generate more traction.
 

Lightweight version of GTX8 front bumper.  

Graphite front plate is CNC-machined from high-grade carbon graphite, ensuring highest strength with lightest weight.  

Front lower suspension arm for C-hub suspension molded from medium hardness composite mixture. 

Front lower suspension arm for C-hub suspension molded from specially-formulated graphite composite material.  

Front lower suspension arm for C-hub suspension molded from soft hardness composite mixture, super-tough, high-tech composite material. 

Eccentric bushing for I.A.C. (Integrated Adjustable Caster). 0 setting identified by no dot. Made from famous Hudy Spring Steel. Set of 2.  

Eccentric bushing for I.A.C. (Integrated Adjustable Caster). 1 setting (identified by 1 dot) allows for either +1 or -1 caster adjustment depending on the orientation of the bushing. 

Eccentric bushing for I.A.C. (Integrated Adjustable Caster). 2 setting (identified by 2 dots) allows for either +2 or -2 caster adjustment depending on the orientation of the bushing. 

Pivoting ball mount for I.A.C. (Integrated Adjustable Caster). Works in conjunction with eccentric front bushings to create various caster settings in front suspension using the same C-hub block. Set of 2. 

Authentic XRAY RIGHT-side 16 alu caster block is CNC-machined from premium Swiss 7075 T6 aluminum.  

Authentic XRAY LEFT-side 16° alu caster block is CNC-machined from premium Swiss 7075 T6 aluminum.  

The machined aluminum shock plate extensions for GT platform can be used on both front and rear suspension arms. 

Front anti-roll bar for XB8, XT8 & GTX8 cars, 1.6mm thick.  

Front anti-roll bar for XB8, XT8 & GTX8 cars, 1.8mm thick.  

Front anti-roll bar for XB8, XT8 & GTX8 cars, 2.0mm thick.  

Front anti-roll bar for XB8, 2.2mm thick. Laser-engraved for easy identification. 

Front anti-roll bar for XB8, 2.3mm thick. Laser-engraved for easy identification.
 

Front anti-roll bar for XB8, 2.4mm thick. Laser-engraved for easy identification. 

Front anti-roll bar for XB8, 2.5mm thick. Laser-engraved for easy identification. 

Front anti-roll bar for XB8, 2.6mm thick. Laser-engraved for easy identification. 

Molded composite parts for XB8 servo saver.  

Rear lower suspension arm for XB9 made from super-tough high-tech composite material. Smart, universal design allows the same front arm to be used on both left and right sides. 

All-new hard XB9 suspension arm moulded from a new blend of XRAY's proprietary composite material.  

Molded lightweight composite rear lower suspension arm made from specially-formulated graphite composite material.  

Optional graphite rear lower arm plate allows for stiffer the arms and makes the car more stable and easier to drive under high-grip conditions. 

Lightweight composite mud guard for rear suspension arms protects the rear drivetrain in wet & dirty track conditions. Set of L+R. 

Chassis side guard brace CNC-machined from high-grade graphite material.  

Reinforcement braces for rear composite brace, stiffen the composite brace and chassis for high-traction tracks. 

With this suspension holder, the roll center is moved by +2mm to allow for super fine roll-center adjustment.  

Lightweight yet ultra-strong rear upright molded from special graphite composite material.  

Alu shims 4x7.5mm size, 1mm thick. Black color, set of 4. 

Alu shims 4x7.5mm size, 2mm thick. Black color, set of 4. 

Rear anti-roll bar for XB8, XT8 & GTX8 cars, 1.8mm thick. 

Rear anti-roll bar for XB8, XT8 & GTX8 cars, 2.0mm thick. 

Rear anti-roll bar 2.2mm thick. 

Rear anti-roll bar 2.4mm thick. 

Rear anti-roll bar for XB8 & XT8, 2.5mm thick. Laser-engraved for easy identification.
 

Rear anti-roll bar 2.6mm thick. 

Rear anti-roll bar 2.8mm thick. 

Rear anti-roll bar 3.2mm thick. 

Alu rear wing shim for XB and XT series buggies and truggies. Provides additional support to prevent wing from pulling off from mounting screws. Set of 2. 

Molded composite rear wing shim for XB and XT series buggies and truggies. Provides additional support to prevent wing from pulling off of mounting screws. Black colour, set of 2. 

Composite center diff mounting plate set - higher made from specially-formulated graphite composite mixture  

Rubber-sealed differential case made from new specially-formulated graphite composite material. Lighter, tougher material with higher temperature and wear resistance, also holds the screws better secured in place. 

44-tooth large external bevel gear manufactured from HUDY Steel for drive ratio adjustment.  

45-tooth large external bevel gear manufactured from HUDY Steel for drive ratio adjustment.  

Precision-ground polished alu pin 3.5 x 26.6 mm for internal satellite gears used in large front & rear differentials #355004 and #355005. 

14-tooth bevel drive gear for front/rear differential. Precision machined on a special gear machine. Fits XB8. 

The 46T diff bevel gear for XRAY Active Diff™ is machined from special HUDY steel material which has been specially developed for gear-type products, additionally hardened and precision ground to fit the tightest tolerance requirements for perfect fit with the diff outdrives.  

Lightweight CNC-machined diff outdrive adapters for XB8 Active Diff. 

CNC-machined CVD drive axle made from premium lightweight Swiss 7075 T6 hardcoated aluminum. 

Drive axle for XRAY adjustable drive shafts. Drive shaft length adjustment uses 4 different connecting hole positions at the drive axle end to allow changes to overall driveshaft length.  

Hardcoated aluminum wheel axle with +1mm offset. Using these wheel axles will increase the overall track width by 2mm, making the car more stable and easier to drive.  

Hardcoated aluminum wheel nut with cover for XB8 wheels. Using these wheel nuts, you will never have problems anymore with dirt getting into the wheel axle assembly! Fits front and rear wheel axles.  

Polished chrome pin with flat spot, 3.0 x 16.8mm. Specially hand-ground for maximum precision. Set of 2. 

High-performance 12T pinion gear, manufactured from special steel for toughness and durability. 

High-performance 13 tooth pinion gear, manufactured from special steel for toughness and durability with precise tolerances and assures unparalleled concentricity. Precision-cut teeth with chamfered edges. Run-in for smooth operation. Includes M4x4 set screw. 

High-performance 14 tooth pinion gear, manufactured from special steel for toughness and durability with precise tolerances and assures unparalleled concentricity. Precision-cut teeth with chamfered edges. Run-in for smooth operation. Includes M4x4 set screw. 

High-performance 15 tooth pinion gear, manufactured from special steel for toughness and durability with precise tolerances and assures unparalleled concentricity. Precision-cut teeth with chamfered edges. Run-in for smooth operation. Includes M4x4 set screw. 

High-performance 16 tooth pinion gear, manufactured from special steel for toughness and durability with precise tolerances and assures unparalleled concentricity. Precision-cut teeth with chamfered edges. Run-in for smooth operation. Includes M4x4 set screw. 

High-performance 17 tooth pinion gear, manufactured from special steel for toughness and durability with precise tolerances and assures unparalleled concentricity. Precision-cut teeth with chamfered edges. Run-in for smooth operation. Includes M4x4 set screw. 

High-strength pinion gear made from tough 7075 T6 aluminum and specially hardcoated for superior strength, light weight, and high durability. 

High-strength pinion gear made from tough 7075 T6 aluminum and specially hardcoated for superior strength, light weight, and high durability. 

High-strength pinion gear made from tough 7075 T6 aluminum and specially hardcoated for superior strength, light weight, and high durability. 

High-strength pinion gear made from tough 7075 T6 aluminum and specially hardcoated for superior strength, light weight, and high durability. 

High-strength pinion gear made from tough 7075 T6 aluminum and specially hardcoated for superior strength, light weight, and high durability. 

High-strength pinion gear made from tough 7075 T6 aluminum and specially hardcoated for superior strength, light weight, and high durability. 

Set of two replacement self-adhesive rubbers. These rubber straps are used to prevent the battery from moving. 

Set of composite molded shock pistons for two shock absorbers with five 1.5mm holes & two 1.0mm holes.  

Set of composite molded shock pistons for two shock absorbers with six 1.3mm holes & two 1.1mm holes. 

Set of composite molded shock pistons for two shock absorbers with six 1.4mm holes & two 1.1mm holes. 

Set of composite molded shock pistons for two shock absorbers with eight 1.2mm holes & two 1.2mm holes. 

Set of composite molded shock pistons for two shock absorbers with eight 1.3mm holes & two 1.2mm holes.  

CNC-machined 1-piece alu shock cap for XB8, made from premium lightweight 7075 T6 aluminum. Black coated. Set of 2.  

CNC-machined 1-piece alu shock cap for XB8, made from premium lightweight 7075 T6 aluminum. Features a small vent hole that makes shock assembly very predictable and easy, allowing excess shock oil to easily escape. Machined interior ridges ensure proper placement and sealing of the super-soft silicone membrane.  

Shock membrane for shock absorbers, made of soft molded rubber. The new shock membranes are now wider to fit the new big-bore shocks.  

Newly designed improved shock membranes provide more consistent feel during long finals with no sign of fade. Shock membrane for shock absorbers, made of soft molded rubber. The new shock membranes are wider to fit the big-bore shocks. The material has been also improved to guarantee the same damping characteristics from the beginning of the race to the end even after excessive loads. Set of 4. 

Shock membrane for XB8 shocks, made from soft molded rubber. Features internal bottom ribs to maintain shape. The specially-formulated rubber material of the shock membrane ensures equal damping characteristics from the beginning of the race to the end, even after extreme operation. Set of 4. Fits XB8. 

Shock membrane for XB8 shocks, molded from softer transparent rubber. 

Rubber valve for 2-way flow in shock pistons. Suitable for shocks in XB8, XT8, and GTX. 

Shock membrane for XB8 shocks, made from medium molded rubber. The cell shock membranes have less air gap that helps to generate more grip of the car.  

Foam inserts for XRAY shocks, go between shock upper mount and rubber membrane. Prevents membrane collapse. Provides slightly more steering, and more stability when landing from big jumps.  

Thick, robust 3.5mm rear shock shaft, precisely machined from special high-tensile steel and hand-ground for a super-smooth finish to ensure smooth movement in the shock body.  

XRAY’s self-designed GTX8 body – made from high-quality Lexan™ material – features high-downforce areas: front windscreen for proper airflow, and side downforce areas for higher stability.  

Connection cable for plugging receiver battery pack into the receiver. Standard Futaba J connector on receiver end, micro battery connector on the battery end. 

High-quality ball-bearings ID x OD x thickness (mm) = 8x14x4mm. Set of 2 pieces. 

New high-speed ball-bearings manufactured specially for XRAY 

New high-speed ball-bearings manufactured specially for XRAY 

New high-speed ball-bearings manufactured specially for XRAY 

New high-speed ball-bearings manufactured specially for XRAY. ID x OD x thickness (mm) = 8x14x4. Set of 2 pieces. 

New high-speed ball-bearings manufactured specially for XRAY. ID x OD x thickness (mm) = 8x16x5. Set of 2 pieces. 

High-speed ball-bearings for XB8’18 and XB8E’18 manufactured specially for XRAY. ID x OD x thickness (mm) = 13x19x4. Set of 2. 

New high-speed ball-bearings manufactured specially for XRAY XB808. Sealed with rubber seal from one side and with steel seal from other side. ID x OD x thickness (mm) = 13x19x4. Set of 2 pieces. 

M3 alu locking nuts. Set of 10. 

Flat washer. ID x OD x thickness = 4mm x 8mm x 0.5mm. Set of 10 pieces. 

Flat washer. ID x OD x thickness = 6mm x 18mm x 0.3mm. Set of 10. 

Flat washer. ID x OD x thickness = 6mm x 18mm x 0.5mm. Set of 10. 

Flat washer. ID x OD x thickness = 6mm x 10mm x 0.2mm. Set of 10. 

Flat washer. ID x OD x thickness = 6mm x 10mm x 0.3mm. Set of 10.